Is JavaMail 1.3.3 supported on z/Linux platform

Hi, I would like to know are following libraries supported on z/Linux platform ?
1) JavaMail 1.3.3 and
2) Java Activation Framework 1.0.2
Or can you please send me the known issues, if any ?
Also would appreciate if could send me any info/link for 64 bit JVM support for these.
Thanks a lot in advance / Rajan Kumar

Java is supposed to be Write Once Run Anywhere. So I would assume that ordinary Java code would run on z/Linux, 64-bit or otherwise, until my tests proved otherwise.

Similar Messages

  • Does weblogic server 10.3.6 & 10.3.5 supported on oracle linux 5.8 ?

    I am trying to install weblogic server 10.3.6 on Oracle linux 5.8 (64-bit) platform. While creating domain , it does not take any input in password & conform password fields on "configure administrator username and password page". The field remains blank. I am stuck at this point and not able to create domain. The same issue is with weblogic 10.3.5 server. The java i used is jdk1.7 update 3 and jdk 1.6 update 27. In Both the cases i am not to create domain.
    Can anyone of you tell me if weblogic 10.3.6 is supported on Oracle linux 5.8 platform. If it is supported any idea how to resolve this issue?
    Thanks in advance,
    Padma

    Yes. Please refer
    System Requirements and Supported Platforms for Oracle WebLogic Server 10.3 ( xls)
    http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

  • Oracle 9i Data Guard supported on Windows 2000 platform ?

    Is Oracle 9i Data Guard supported on Windows 2000 platform ?

    YES, we are currently using Data guard on 2000 Windows Server. Will need to have the Management server installed in order to get the Data guard function.

  • Will CS6 still be supported on Windows XP platforms?

    Will CS6 still be supported on Windows XP platforms now that Microsoft no longer support this operating system?

    Hi Zardos999,
    Welcome to Adobe Forums.
    Some applications will work on windows xp and some applications will not work. ( For eg. Premiere Pro, Encore, After effects will not work).
    Which Adobe Application are you using?
    Please check out the system requirements in the below link.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html
    Thanks

  • I m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    i m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    tom i have been using ubuntu for c++ project
    i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
    installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
    to compile wanted to have g++ which supports c++0x features ...
    new to MAC (2-3 days) so was in rush to solution
    let me know if you have some suggestion ...
    else will try with eclipse cdt .... 

  • When will IPV6 be supported on Sup2u/MSFC2 platform in software?

    When will IPV6 be supported on Sup2u/MSFC2 platform in software? If it's avalible now, where do I find it?

    Check the below links. Cisco supports IPV6 in almost all the router platform starting 12.2(2)T.
    http://www.cisco.com/warp/public/732/Tech/ipv6/
    http://www.cisco.com/en/US/partner/products/sw/iosswrel/ios_abcs_ios_the_abcs_ip_version_60900aecd800c1132.html

  • WSRP Support Kit for WebLogic Platform 8.1 SP2

    The WSRP Support Kit for WebLogic Platform SP2 has just been released at
    http://dev2dev.bea.com/products/wlportal81/articles/wsrp_support_kit.jsp.
    Please note that this is a preview release, and requires WebLogic
    Platform 8.1 SP2.
    Regards,
    Subbu

    There is a release planned for mid Summer, but it is too early to confirm.
    In case you must add WSRP support to apps in platform domain, you can do
    so manually, and here are the steps.
    - Create a platform domain before installing WSRP Support Kit.
    - Create a portal domain after installing WSRP Support Kit.
    - Replace <Security> element in config.xml in the platform domain with
    the one from portal domain.
    - Add wsrp-common.jar file to the system classpath for the platform domain.
    Let me know if this helps.
    Subbu
    Murtaza Sonaseth said the following on 01/07/2004 02:51 PM:
    Is there an planned final release date for WSRP or at least a rough timeframe?
    Thanks,
    M Sonaseth.

  • Ask the Experts Session on AJAX Support in the Java Platform -- June 19-23

    Got a question about AJAX support in the Java Platform? Post it on the Ask the Experts page (http://java.sun.com/developer/community/askxprt/) during the week of June 19 and get answers from Sun experts Greg Murray, Mark Basler, and Carla Mott.

    Perhaps this explains why Sun removed the crossposting ban from the site "Terms of Use"?

  • Ask the Experts Session on AJX Support in the Java Platform -- June 19-23

    Got a question about AJAX support in the Java Platform? Post it on the Ask the Experts page (http://java.sun.com/developer/community/askxprt/) during the week of June 19 and get answers from Sun experts Greg Murray, Mark Basler, and Carla Mott.

    Perhaps this explains why Sun removed the crossposting ban from the site "Terms of Use"?

  • Does the Model Interface Toolkit support the new Linux based cRIO-9068?

    Hello, I have a cRIO-9068 and am needing to integrate a Simulink model into my controller. Does the Model Interface Toolkit support the new Linux based cRIO-9068? For that matter, does Veristand? This page implies that it does not:
    http://digital.ni.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751
    Thanks,
    Solved!
    Go to Solution.

    Hi Southern_Cross,
    Based on the readme:
    http://digital.ni.com/public.nsf/allkb/D3F40C101B66128186257D020049D679
    It looks like it is now supported! These resources should provide some additional details:
    http://zone.ni.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/
    http://digital.ni.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055
    Please note that NI VeriStand 2014 does not currently support he NI Linux Real-Time targets. 
    Regards,
    Joel I.
    Applications Engineer
    National Instruments

  • PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host

    after formating  when tryed to install software to the target  this Error Shown
    NI PXi 8108
    The Selcted Target does not support this function 
    when I try to add PXi chassis this Error Shown
    PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host
    Help me!

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • What determines whether 3D is supported on a given platform?

    I'm using the 2.0 beta (build 34) on Windows 7... when I call Platform.isSupported( ConditionalFeature.SCENE3D ), I get a result of 'false'.
    What determines whether or not 3D is supported on a given platform?

    I just found the resolution to my problem in Jira, at: http://javafx-jira.kenai.com/browse/RT-14415
    Specifically, this comment:
    The minimum driver version for Intel HD was recently changed to 8.15.10.2302 to workaround bugs in older drivers.
    If you run JavaFX as follows, it will show you your driver version number, and also print the minimum version number.
    1. Set the environment variable NWT_TRACE_LEVEL=4
    2. Run any JavaFX program with: java -Dprism.verbose=true ...

  • Please go back to support AIR in linux!

    With the announcement of a multiplatform ubuntu, I am very excited about the idea of developing a starling game for ubuntu tablets and phones. Please go back to supporting linux/Ubuntu! If you support the linux platform you'll have even more userbase for those who would buy your development products. Ubuntu looks like an exciting new platform! As much as I like flash/air, you keep supporting it less and less and we'll all be forced to switch unless you show some love and start supporting it!

    Post your comments on the Product Feedback website.  this area is not the place because.....No one here works for Apple nor does Apple visit this message board.  We are all end users like yourself helping each other out.  This is a user to user message board.

  • Javamail API doesn't support special characters in attachment file name

    Hi,
    We are using Java Mail API to retrieve the attachment's file name, but it sometimes returns the file name as junk character (if the attachment contains special characters) and it is not able to return original file name for some attachments:
    Our code sample :
    void getFileName(Part part) {
    String fname=null;
    fname = part.getFileName();                          
    Actually the problem is with the attachment file name which contains special character. For example below is the attachment file name (please find the sample attached file which is causing this issue):
    Sample – 1234abc.doc
    From above you could see the file name contains a special character (Sample – 1234abc.doc), i.e. The character ‘–’ is not a regular hyphen character, it’s a special character. Hence the Java mail API returns the name as below:
    Sample ? 1234abc.doc
    So the special character is being replaced with ‘?’ symbol. But if I store this file in local folder and try reading the file name using Java IO packages, it returns the file name without adding ‘?’ symbol.
    Is there any way to handle such kind of special characters in Mail API?
    Regards,
    Vinodh

    We dealt with this issue in a private email conversation.
    JavaMail is returning the correct data for the filename.  The problem is in the way the filename is being displayed.

  • Oracle Forms (Support & Certification) on Linux RedHat AS 4.0 (Intel 32bit)

    Hello,
    Does anybody know for sure if Oracle is certifying Forms (part of Application Server 10.1.2.2) on Linux RedHat AS 4.0 (Intel 32 bit). We are trying to move from v3.0 to v.4.0, however without Oracle support, that might not happen.
    Any help or guidance on this matter would be greatly appreciated.
    Regards
    Kunal Bansal

    I did search in Metalink indeed. This document is really the latest certification they have. But funny thing is that the rda.sh script Oracle released checks for RH4 in addition to RH3. I have my test iAS server (10.1.2.0.2) and iDS (same version) installed on RH 3 (just in case) but I have installed iAS server in 2 different places (for deployment) on RH 4 - both went just fine. I know there is a document on Metalink, explaining how to install on RH 4 - basically, they released a small patch set for those who wants to install on RH 4. I did apply that patchset (it is for OUI not for the forms). My quick solution to implement this patchset was to create a staging directory (disk1, ...) and then replace couple of files located under disk1 staging directory with the files that comes with the patchset (unzipped into a separate place), then start the installation of 10.1.2.0.2 on RH 4. Everything then went just perfect on RH 4. No problems reported so far (2 separate installations on 2 separate sites on RH 4). I don't know if this helps but just wanted to provide some feedback.
    R/ Zaf

Maybe you are looking for