Is Keynote worth the money? Does it work the same as Powerpoint for Microsoft?

I need a powerpoint program for my mac and I was just wondering what is best.

Is Keynote worth the money?
  for $20 its worth it for a basic presentation tool for Kids Teachers and trainers.
I need a powerpoint program for my mac and I was just wondering what is best.
If you want Powerpoint you buy Microsoft Office for Mac from Adobe.com for $ 140
If you want Keynote buy it from Mac App Store.
Best for what, ceap to buy, easy to use, comprehensive set of tools?

Similar Messages

  • Wi-Fi does not work after 7 ISO download for iPhone 4s  What is the solution

    Wi-Fi does not work after 7 ISO download for iPhone 4s
    What is the solution

    For clarification, 7 ISO is not an Apple software product
    iOS 7 is...
    What is your issue with the wifi?
    Have you reset network settings?
    Can you include screenshots of the issue?

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Does CTS+ work with SLD transport targets for ID transports?

    Hi,
    does CTS+ work with SLD transport targets for ID transports?
    did any of you ever used it ?
    thank you,
    Regards,
    Michal

    Hi Michal
    I would be interested to find out about this..
    Hopefully this new project will use 7.1 and Basis are doing all the SLD and the CTS+ config..
    I have every faith in them!!!!  :-O
    There is a document about transporting repository and directory objects, but every version I have found is corrupt - or I cannot open in Adobe...
    You may have more luck!
    Change and Transport System
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
    "This How-to Guide explains step–by-step how to set up the enhanced Change and Transport System (CTS) for use in conjunction with usage type Process Integration (PI) of SAP NetWeaver (formerly known as SAP NetWeaver Exchange Infrastructure or SAP NetWeaver XI). CTS introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality."
    Maybe in six weeks I can actually answer this for you!  I'm sure you'll have the answer by then!

  • Can I use the same apple ID for my personal and work phones?

    I have a personal iPhone (AT&T) and am getting one issued through work (Verizon). Am I able to use the same Apple ID for both phones?

    In theory, yes. You had best ask your IT department, though... or whoever is issuing the phone to you. They may have policies as to what is and is not allowed to be done on company owned phones.

  • I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

    I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing. 

    Hi Tracie,
    I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
    How did you resolve your problem?
    Would appreciate any help here.
    Thanks,
    Deehay

  • I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

    I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

    Only you can make that determination. All things being equal the 2.5 GHz model is slower.

  • All Keynotes are the same

    Hi,
    I add two different Keynotes (Widget) into my iBooks Author and then click "Preview",
    I expect two different Keynotes were shown.
    However, all Keynotes are the same.
    May I know the reason behind and how can I solve it?
    Sam

    Hi Gertjan,
    I found the reason behind. My Keynotes named ABC.01.key, ABC.02.key, ABC.03.key, etc. And the problem existed.
    And the solution is:
    Rename the filename from "." to "_", like ABC_01.key, ABC_02.key, ABC_03.key, etc.
    Try if it solve your problem too.
    Sam LEE

  • I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? C

    I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? Can someone answer in German?

    I suspect you will want to ask your question at the forum for Adobe Digital Editions which is eBook, eBook reader device focused.
    Be well...

  • How to use the same credit card for more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    thanks

  • HT204053 Can I use the same Apple ID for iMessage and FaceTime services from two different devices - iPhone and iPad?

    Can I use the same Apple ID for iMessage and FaceTime services simultaneously on two different devices - iPhone and iPad? It seems those are competing to each other, and the services work on one of them only (iPhone).

    Many thanks, Sir! Both are mine and it's good to know that imessage can work on both with the same Apple ID. Will now have to find out why imessage stopped working on iPad when it started on iPhone (new). After exploring the forum I understand  that there may be plenty of reasons why imessage does not work, even though it worked previously on the same device with the same ID.

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • Use the same code module for several steps in the sequence

    Hello All,
      I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands.  I have gotten as far as calling the VI in a new thread so that it can be run asynchronously.  I can run the simple sequence and it will indeed open the VI, and move on to the next step.  When I close the VI manually from the front panel, the sequence in TestStand completes, as expected.  So it appears that I have that much working. 
      My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters.  If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously.  My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters.  Beyond that, I'm not sure how to proceed.  Please advise.   
      My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results.  If I am misunderstanding how TestStand is supposed to work, please let me know. 
    Thanks,
    GSinMN    
    Solved!
    Go to Solution.

    What I do is use a Queue to send data to the asynchronous VI.  So it can run and do whatever, but also recieve the commands from the queue.  I use an Action Engine that holds the queue reference and sends the commands.  So you really just have to call the Action Engine from your sequences.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Can I use the same USB cable for both the iPhone and the iPad?

    Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad?  The iPad does not charge when plugged into the computer or the wall (110V) adapter.  I've been able to sync in iTunes using the same cable on both.

    Actually, the iPad charger works just fine with iPhones and iPods.  The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Maybe you are looking for