Is Leaving MacBook Pro Turned On 24 Hours Bad?
Hello. I'm just wondering whether it is okay to leave my MacBook Pro turned on all day.
I often forget to turn off my laptop and I'm a bit worried whether not tunrining it off can
bring bad results.
Lion 2012 wrote:
Hello. I'm just wondering whether it is okay to leave my MacBook Pro turned on all day.
I often forget to turn off my laptop and I'm a bit worried whether not tunrining it off can
bring bad results.
Leaving it plugged in for a 24hr period will not harm it at all. I've had mine plugged in for days at a time, and even running at near 100% cpu useage for up to 96hrs straight for some analyses.
You should, however, try to unplug it and use the battery a bit at least every few days or once a week or so - just a partial discharge and charge at least every few days or min. of once a week is a good idea to make the battery last as long as possible.
Similar Messages
-
My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?
If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider. An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed). If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
The battery icon on my (old) MacBook Pro turned red for a few moments, then black. What does this mean?
penny41,
Thanks, glad it helped you to check your battery status.
Something else to look at would be the cycle count, as you mention that your computer is "ancient". If you have a high number of cycles, it may also be a sign that the battery is tired and possibly nearing it's life span, and may possibly need to be replaced soon. If you see that again you may try a SMC reset to see if that helps, but if it continues you may need a new battery at some point. The battery icon will usually say needs service, or something to that effect. For the later MBP's Apple claims a life span of up to 1000 cycles, of this also will be dependent on who the battery is used, on the older ones I'm not quite sure what the claims were, and I don't know how old "ancient" in your case actually means.
I provide this for your info, so that you understand what may possibly be occurring.
I wish you the best.
SMC reset:
Follow directions for what applies to your machine, a battery you can remove, or a battery you should not remove yourself.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support -
My macbook pro turns blue and freezes
my macbook pro turns blue and freezes, especially when using hotmail. It blinks blue when switching in hotmail pages. Once fully blue I have to restart it as it crashes
Step by Step to fix your Mac
-
MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?
Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
MacBook Pro turned off on its own and now won't turn back on.
MacBook Pro turned off on its own and now won't turn back on. Battery had 41% just before this happened and green indicator on power cord is showing, so it seems like it's charging. What should I do?
The led on the power adapter should be amber if it is charging. Green just indicates that it is supplying power to the MBP.
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
Macbook pro turns on for a minute and turns off before it fully loads
The MacBook Pro turns son for about 30 seconds before turning off again even though it is charged.
Is the power adapter attached?
Have you tried a Safe boot?
http://support.apple.com/kb/HT1455
If that fails, I suggest an appointment at an Apple store genius bar.
Ciao. -
Is that safe over use / overusing a macbook pro more than 12 hours non stop daily ?
Is that safe over use / overusing a macbook pro more than 12 hours non stop daily ?
It should not be a problem unless you are generating a lot of heat with many resource intensive applications.
Ciao. -
Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?
I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend. -
I just tried to wake up my 4 year-old MacBook Pro after perhaps an hour of inactivity, and it just 'pinwheels' and won't restart. HELP!!!!!!!!!
Semi-experienced user - Western New York.
System was operating nominally until I opened it from 'sleep' mode after ~1 hour of inactivity.
No idea what's going on. I had just installed a Flash Player update [not an atypical occurrence] at ~6:00 PM this evening, but used the system without incident after that. Re-Start attempt does not appear to succeed, the circular pre-OS icon never clears and displays the authorization screen.
Anyone with an idea how to help would be greatly appreciated. We have so much personal and business data on this machine!!!
Thanks!
Jim F.Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.
The fact that you're worried about the data implies that you have no backups, or that you don't have confidence in your backups. Your first priority must be to back up all the data you intend to keep. Ask if you need guidance. -
I wanted to calibrate the battery my new macbook pro turns off
You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 3 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad?
Resetting the PRAM (http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html) fixed the problem in my case. then i did the calibrate the battery again this time it went to sleep not shut down i did this 3 more times why?
the 3 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010the 9 more 4 in 10.6.4 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010 but if it happens again you should try
i hate to do this reinstalling the OS, if this do not work also, then you should call apple, or take your MBP to an apple store. on june 24 2010 i am going to talk to spence about this. so what do i do now? this happed on june 16 2010 4 more times
without entering SafeSleep. only one time it worked on 10.6.4
You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 9 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad? -
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
MacBook Pro turns off when mega-safe adapter is removed
Hello,
I just installed a new battery, however, battey health condition seems normal but my macbook pro turns off whenever i remove the mega-safe adapter. I also noticed that even though the battery says 100% charged, the fully-charged green indicator does not come on. Below is the system information.
HELP!!!
Battery Information:
Model Information:
Serial Number: W0*****3LC
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 165
Charge Information:
Charge Remaining (mAh): 5568
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5568
Health Information:
Cycle Count: 3
Condition: Normal
Battery Installed: Yes
Amperage (mA): 8
Voltage (mV): 12580
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00eee1de
Charging: No
<Edited by Host>olacurrency wrote:
error code: 4SNS/40000000: IPBR-9.165
This is a current sensor on the power bus. This seems consistent with your symptoms.
A faulty sensor on the logic board means the board has to be replaced, take in for repair:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do -
My Macbook Pro turns off suddenly with no reason
My Macbook Pro turns off suddenly with no reason. The battery it's ok, the temperature of the mac it's normal, but the pc turns off. What can i do ?
Xirver,
if you boot into Safe mode, does your MacBook Pro turn off suddenly then also? -
Macbook pro turns off at 60% battery
Whenever my laptop gets to 60%, my macbook pro turns off. I've read that resetting the smc might be able to fix it but it hasn't made much difference. Here's my battery info. Any help would be great. Thanks!
Battery Information:
Model Information:
Serial Number: 9G12109CVD3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 1670
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 2474
Health Information:
Cycle Count: 905
Condition: Service Battery
Battery Installed: Yes
Amperage (mA): 734
Voltage (mV): 12136
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x0031846b
Charging: YesThe Cycle Count is 905 so it may be time for a new battery. Maximum is 1000.
Check here > Mac notebooks: Determining battery cycle count
Maybe you are looking for
-
Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTune
-
Compilation options native libraries
I keep getting a number of errors due to compilation issues. The problem I have is that the compilations of the vi finds other versions of subvi's in old libraries and not the ones under the labview subdirectory. If I go through and find these and th
-
Hi, is it possible to send ISR Adobe form by email? I would need to feel the form with data and send it. Thanks inadvance, Anna
-
Dear Sir, actually i am trying wms, wfs using oracle spatial with mapviewer. but i am not familiar with this technolog. i seen following link of sir Dr. Siva ravada for wms, wfs with oc4j. Re: Acquiring Oracle Spatial Data through WFS i seen wfs them
-
Driver for Canon MF3200 Series?
I have a PC, a newly-bought Mac and a Canon MF3240 printer. My PC prints well with Bonjour through AirPort Extreme. But there is no available driver of this printer for Mac... I would appreciate if Apple team can notice my message, and I am also wait