Is Leopard a free upgrade to Tiger?

Hi. I'm coming from the Windows world and would be moving semi-full time to Mac OS X. I'm just wondering if the Leopard release is a free upgrade to Tiger or is it a completely new upgrade similar to going from Windows XP to Vista.

Apple does not sell upgrade version of OS X (withthe exception of OS 10.1). They only sell full retail versions, so far all for $129 (academic price $69). Typically, if you purchase your Mac after the new version is released, but before Macs begin shipping with the new version installed, you get an upgrade disk dropped in the box for free. Apple will probably continue to do the same when Leopard is released.

Similar Messages

  • Is Tiger to Leopard a free upgrade?

    Do you upgrade to Leopard from Tiger or buy it. Are their two versions upgrade and full install?

    I am really getting tired of this. I couldn't even talk to support over this issue because Apple wanted to me to purchase an extended warranty to talk to support because my MacMini warranty expired. Rules are rules sorta thing. Obviously Jobs is turning into Gates. Apple's FAQ implies without an upgrade to Leopard, my Tiger OS would quit working, FAQ also seems to say BootCamp Beta expired on Tiger would prevent me from booting back into Win. I don't think I need to go into any details of which devil I may have to switch to. These rules are lies without a support department, which as of 08, seems to no longer answer simple yes / no questions without a credit card.

  • Upgrade from tiger to leopard on a power mac G?

    can i upgrade from tiger to leopard on a power mac G5?

    Yes, however, read about the pitfalls below.
    Mac OS X 10.5 was release October 26, 2007.  Its 10.5.8 update is the newest operating system available for PowerPC Macs that meet its requirements.  It is available occasionally by calling Apple online store's phone number, even though the website does not show it.  Many want to upgrade to Leopard because of i-Devices (iPhone, iPad, iPod) bought saying iTunes 10 or later is recommended.  To check if that really is required, look at the i-Device requirements section of this tip
    If your Mac is Intel, and running 10.4.11 or earlier, and meets the hardware requirements of 10.6, a less expensive upgrade solution is to upgrade to 10.6 directly.  No need to upgrade to 10.5 unless your software won't run in 10.6.
    Software listed for Intel Mac and PowerPC Macs can run on 10.5 for the platform indicated in the link. For Leopard you need
    867 Mhz on a single processor or faster (1 Ghz and higher are faster).
    256 MB of RAM (preferably 512MB of more based on arbitrary experience).
    9 GB of hard disk space (arbitrary experience adds another 15%) free.
    Macs newer than August 28, 2009 can't run Leopard, and require a minimum of Snow Leopard.
    Dual booting Mac OS 9 and Mac OS X 10.5, check this tip:https://discussions.apple.com/docs/DOC-1757
    Classic is not compatible with 10.5.  10.4.11 on a PowerPC Mac or earlier is needed for Classic.
    Mac OS X 10.5 is the earliest version of Mac OS X that will run iTunes 10.  This is necessary for numerous i-Devices (iPad, iPhone, and iPods).  To find out which require it, see this article
    http://en.wikipedia.org/wiki/ITunes_version_history
    Should you require only iTunes 9, and are running a minimum of 10.4, backup your data at least twice, check in Apple menu -> About This Mac if you have a G3, G4, G5 (which is PowerPC), or Intel Core (which is Intel) make sure you are running 10.4.11 PowerPC or 10.4.11 Intel (depending on the aforementioned processors), and download iTunes 9.2.1.  The only reason you should upgrade to 10.5 is if some other software is required.
    Boot Camp is only available on Intel Macs with 10.5 and higher.
    Time Machine backup software first appeared in 10.5
    You have several options of installation which are explained here: https://discussions.apple.com/docs/DOC-2209
    All of which I recommend you backup your data at least twice before upgrading, and have sufficient disk space to install, and all your third party applications and drivers are known to be Leopard compatible, and after backing up your data you dismount and disconnect all but Apple keyboard and mouse and if there is an external display, that too. And just before you install repair permissions.
    If any of the above terms confuse you, ask on the Discussions board what they mean, and one of the people who knows will gladly assist you.
    You must use the installer disc that looks like *, and does not say Upgrade, Dropin, or OEM, if you choose to upgrade to Leopard.
    Message was edited by: a brody

  • Buy new mac w/free upgrade to Leopard?

    Hello,
    I know this is a long shot but if I buy a new Mac now is there any possibility that Apple will do a free upgrade to Leopard when it comes out? I know that Microsoft does this with it's operating system when you buy a computer nearing the date of the new OS arrival.
    Thanks,
    David

    David, in the past Apple has offered a reduced upgrade to a new OS when you've bought a new Mac within a short window of time prior to the announcement. For example, Tiger's release was announced 25 days after I bought my PowerBook so I wound up getting a Tiger upgrade for $20 if I remember correctly.
    But there's no guarantee Apple will do that with Leopard and, of course, we don't know when Apple will announce Leopard. My standard answer is always this: If you need the computer now, buy it. Waiting is a fool's game, you can always find a reason to delay your purchase. I had a friend who kept finding a reason to wait another month and that went on for 6 years!

  • Upgrading from Tiger to Leopard on and external (FireWire) drive...

    Hi all,
    I'm pretty sure this has been discussed somewhere on the www but after several hours of research, I'm embarrassed to admit I'm ready to call it quits (unless someone more tech savvy than I can help <:o)
    I've been running my OS on a WD 500GB FireWire for the past couple of years. Switched to it shortly after realizing that the 80GB HD on my MacBook was insufficient for my needs.
    Now I'm getting ready to upgrade from Tiger to Leopard and I've got some issues. Most importantly, when I launch the installer and it requires me to restart my system, I do so through both methods (holding down the "option" key to start up using the external HD and also by just allowing a normal boot under the old drive). In neither situation do I ever get the option to select where I'd like to install the new OS. In fact, when I allow the normal start without the "option" key being pressed, I don't even get to see the option to begin an installation. When I hold down the "option" key, I get the Mac OS X Install DVD screen (directory on the DVD), but it never gets to the point where I can start the installation.
    I'm at a loss and getting a little frustrated (which has been my problem since I started with Macs--been a long time PC user and I'm always looking for the difficult way of doing things--so I'm probably just being PC-stupid as usual >;o)
    Any assistance with getting me on the path to continued righteousness would be greatly appreciated. Thanks very much in advance!
    Ali T. Borahan
    http://www.alisails.com
    PS: Despite the fact that I'm PC-literate and Mac-stupid, I've managed to convince almost a dozen people to switch to Mac, simply because I'm hooked and love how the Mac community sticks together and helps one another (and also because I can't stand the Microsoft kingdom!!! <:o)

    Insert the Leopard DVD in the optical drive and restart the computer. After the chime press and hold down the "C" key until the dark gray Apple logo appears on the screen. After the installer loads select your language and click on the Continue button.
    When the menubar appears select Disk Utility from the Utilities menu. After DU loads select your startup drive's entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Continue with the installation process until you reach the point where you must select a Target drive. Select your Target drive then click on the Options button in the lower left corner of the dialog.
    Select the Archive and Install option.
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    Your target drive must have repaired OK when you repaired it. Otherwise do not continue.
    You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Price for Upgrade from Tiger to Snow Leopard

    As the topics says, my question is how much it will cost to upgrade my Tiger to Snow Leopard if its released.
    Any ideas? I did read that Leopard to Snow Leopard Upgrade has a price of $29. Did this means, I have to buy Leopard and Snow Leopard because I am currently only Tiger user?
    Greetings
    Schaelle

    Those who have Intel Core 2 Duo processors will apparently see significant performance boosts with Snow Leopard. SN is also much smaller than Leopard. From [Apple's press release|http://www.apple.com/pr/library/2009/06/08macosx.html]:
    Users will notice a more responsive Finder™; Mail that loads messages 85 percent faster and conducts searches up to 90 percent faster;* Time Machine® with up to 50 percent faster initial backup;* a Dock with Exposé integration; a 64-bit version of Safari® 4 that boosts the performance of the Nitro JavaScript engine by up to 50 percent** and is resistant to crashes caused by plug-ins. Snow Leopard also includes an all new QuickTime® X, with a redesigned player that allows users to easily view, record, trim and share video to YouTube, MobileMe™ or iTunes®. Snow Leopard is half the size of the previous version and frees up to 6GB of drive space once installed.
    There's also an interesting article in [last week's PC World|http://www.pcworld.com/article/166344/snowleopard_taps_into_the_macs_corepower.html].
    According to the article, the main Snow Leopard performance boost comes from parallel processing across multiple CPU cores and graphics hardware processors, not just from the increased RAM address space.
    We'll have to wait for further real-world tests, but an additional $29 may be a good buy for those Intel Core2Duo owners who already have or were planning to buy Leopard.

  • Is it possible to upgrade from Tiger (10.4) to Leopard (10.5)? Thanks

    Wondering if I can upgrade from TIger to Leopard (and then to Lion) on my old Macbook. Don't really want to buy a new notebook when this one works fine. But would like to use some of the features available through Lion (notably iCloud). Thanks.

    Hello Judy,
    You'd want to skip Leopard/10.5.x totally as it's not needed & expensive since Apple no longer sells it & it was $129.
    You can get Snow Leopard/10.6 for $29, then once updated to 10.6.6 or greater buy Lion/10.7 from the App Store, as long as your MacBook meets the requiremenys...
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory[14]
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading[14]
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
    http://www.apple.com/macosx/how-to-buy/
    What applications are not compatible with Mac OS X 10.7 "Lion"?
    http://ow.ly/5Iz09
    http://roaringapps.com/apps:table

  • ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

    After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
    Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
    My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
    Any ideas on how to get the iPod recognized again in iTunes under Leopard?

    Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • Upgraded from TIGER to SNOW LEOPARD

    Hello,
    How can I uprade from TIGER to SNOW LEOPARD? Do I simply use the upgrade snow leopard to do so? Will that create any instability or issues?
    thank you very much.
    Alex

    Yes, you can upgrade from Tiger to Snow by purchasing the SL DVD. Doing so would only create stability problems if you already have problems, so you should be sure you have a clean system before upgrading. See the following:
    System Upgrade and Installation Procedure
    Basic Caveats
    1. Disconnect all peripherals except the original mouse and keyboard.
    2. Quit all applications if this is not an installation from an Installer DVD.
    3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
    4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
    System Update Procedure
    A. Repair hard drive and permissions.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
    B. Clone your existing system to an external Firewire drive.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the startup or source volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Drag the startup or source volume to the Source entry field.
    5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
    6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
    7. Double-check you got it right, then click on the Restore button.
    C. Decide upon an installation option (This does not apply to Snow Leopard.)
    You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
    Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.
    Personally, I would erase the hard drive and do a fresh install of Snow Leopard then use Migration Assistant to migrate your old Home folder from the backup. This may take some extra time but is less likely to have problems that may be the result of an upgrade installation.

  • Upgraded from tiger to snow leopard, can I go onto lion?

    I have recently upgraded from tiger (I think) to snow leopard, can I go onto lion?
    I have a imac 17" 2 GHz Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM, I think I bought it in 2007, I don't use it for much but a bit of browsing storing photos and music and maybe a couple of documents.
    I have been told by some that if I go to Lion it would be a risk and slow the computer down, so just wondering what you all think.
    Thanks in advance,
    Rossi

    http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.0-17-inch-spe cs.html
    According to unofficial sources, you can upgrade to 4GB RAM. I've done the same in my late 2006 iMac 20" which is offically upgradable to 3GB, but I stuck 2 x 2gb modules in anyway (mainly as I had one spare from my MPB). It's dead easy to do, I'm in the UK and bought Crucial memory which I've always trusted.
    I believe the Mac will still only use about 3.3GB of the available 4GB RAM, however some people have reported better performance as both modules are the same size and this helps.
    Probably worth getting 2 x 2GB given it's not that expensive. You can always keep your old RAM incase anything goes wrong.
    I'd do this regardless of upgrading to Lion or not, the extra RAM will help.
    BTW, regardless of a lot of the negativity, I love Lion, it speeded up my other 2007 MBP like it was a new machine. The iMac seems okay, although that is showing a few signs of some graphics glitches, but I don't think this is anything to do with Lion, more about overheating.
    Best thing to do, is to clone your existing system (using Disk Utility or SuperDuper or CopyCloner) so that you can boot off that or restore it at anytime without losing anything of your setup.
    Then clean install Lion (there are instructions about on how to do this, and create a bootable USB key). You can then migrate back your user settings from your clone to the Lion install. Or just upgrade Snow Leopard. Depends on whether you believe in fresh installing everything.
    If you don't like Lion, or it's slow or whatever, you can always restore your snow leopard system from the clone.

  • I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

    I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
    After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the  install fails reporting "insufficient memory".
    I assume the installation requires more memory than the OS actually needs to be able to run.
    I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

    Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
    The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
    You need much more RAM than that.
    Leopard system requirements:
    http://support.apple.com/kb/SP517

  • Can't play long voice memo after upgrading from Tiger OS to Snow Leopard OS

    I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?

    I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?

  • Do I need to backup my files when upgrading from tiger to leopard?

    Not sure if I need to backup all my files before upgrading from Tiger to Leopard (to use a Mac Box Set), have bought a Seagate 1TB FreeAgent GoFlex Home hard drive to back up on. Was told I wouldn't need a WiFi router but have now discovered I would need a dual Ethernet port to be connected to the internet and the hard drive which my Mac mini only has access for one, either the internet or the hard drive. So I ask do I really need to back up before upgrading? or can you get dual Ethernet ports?

    Only if your data has any value to you.
    If everything works perfectly, you should lose nothing.
    If anything goes wrong, it is possible to lose data.
    Personally I don't want to trust my data to everything working perfectly so I back it up.
    As to the question of dual ethernet ports, you don't need them actually. If you create a LAN with a router then the multiple ports on your router will allow you to connect to both the internet and disk at once.
    Allam

  • Want to upgrade from Tiger to Snow Leopard

    I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
    The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?

    Francois Dormoy wrote:
    I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
    The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?
    this has been oft asked and answered. you can buy a Macbox set which will give you snow leopard, ilife and and iwork. or you can buy a $29 standalong snow leoaprd dvd although there is a big disagreement on the board whether using it to go from tiger to snow leopard directly violates ULA (I think it does). but the actual disk is the same as in the macbox set and either one will upgrade you to SL.

  • Will an upgrade from Tiger 10.4.11 to Snow Leopard make me loose programs?

    I have an old 2007 Macbook pro and I need to upgrade from Tiger OS 10.4.11 to either leopard of Snow leopard because my charger broke and the new charger does not work probably in the older laptops unless you firmare update (which I cannot do as my OS is less than 10.5)
    My question is: Will upgrading wipe all the files and programs from my laptop? I have programs that I no longer have the discs, to install them with, for so if they get wiped I will be unable to get them back and they are programs I need on a daily basis. I was just wondering what upgrading from tiger to leopard will actually involve? Will I loose all files/programs so it would be like starting from scratch with a new computer? Or would it not change these things?

    Buy an external drive (or two).
    Clone your system before you begin.
    Repair the drive while at it, Apple First Aid and another 3rd party program.
    Make sure you can boot from your backup clone.
    Apple Restore is part of Disk Utilty or there is SuperDuper, or Carbon Copy Cloner.
    Me, I would take the above precautions. Then I would format your drive with SL DVD, and perform and clean install. Do all the updates. Then use Setup or Migration Assistant.
    Look for threads, there seems to be 4-5 a week at least on Migrating, going from 10.4 or from PPC to 10.6.
    That is the safest. In theory, and YMMV, you could try upgrade in place, but not without backups, and repairing your drive with SL DVD first.

Maybe you are looking for