Is Lion available on disk?

In a perfect world, we'd all have super wideband DSL or cable interenet.  Unfortunately, I live in the real world where that is not a fact.  I would like to download Lion and upgrade my iMac, but at approx 4Gigs, we're talking about a download of over an hour.  I've found from past experience, that downloads that take this long are open to corruption that doesn't seem to happen in shorter, smaller downloads.  A few friends have had major problems due to bad downloads of Lion and have spent many hours in getting it straightened out. A couple have given up and gone back to S.L.
I've searched, but can't find anything about Lion being available anywhere on a disk that can be ordered. 
Does anyone know for sure that's it's available only by download?
Thanks,
Rich

You can purchase an Apple USB Lion Installer flash drive for $69.00 at most Apple Stores or from Apple Online.

Similar Messages

  • In the installation process lion will not install as message  reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

    After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
    Any body got any idea what to do next ?

    Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
    If there is enough room you may be able to partition the drive on the fly with DiskUtility
    Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant?  Please explain.

  • Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

    just bough OSX Mountain Lion, my laptop operating with v10.6.8.  Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

    Verify your computer can run Mountain Lion:
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now try installing Mountain Lion.

  • Creating a bootable Lion install disc/disk and using it

    Hi all,
    Below is a copy of a method ds store posted for creating a bootable Lion install disc. Some questions:
    1. Is this a polished final version of the process, or are there other steps which could/should be added?
    2. Are there any disadvantages to going this route instead of installing directly onto a Mac?
    3. After creating a Lion install disc/disk via this method and using this saved dmg to install Lion on a Mac, will it set up the Mac exactly the same way it would by downloading/installing directly from the Apple Store (sounds like a "duh" question, but nothing would surprise me with Lion)?
    4. Exact size of this dmg (in case I want to use a flash drive instead)?
    I have been avoiding Lion, hoping it would shape up. I'm still not satisfied and will not run it on my main machines. (Of course ymmv; I'm not looking to be talked into or out of using Lion.) However, I am ******* (hmmm, I guess l-u-s-t-i-n-g is a bad word!) over a new Mac Mini, which will have Lion installed, with no chance of running SL on it due to the new hardware revision. Thus, I'm either going to have to make peace with Lion or forget about a new Mini. I guess I'll have to give Lion a try, but I still don't want to actually run it on any of my machines; thus, I want to run it from an external drive, playing with it as I have time/desire, leading to more questions.
    5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
    6. How much space is needed on a destination disc/disk to install Lion?
    7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
    8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
    9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP. Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
    10. Any constructive suggestions on anything related to any of these steps is welcome!
    Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
    Thanks!
    Backup Lion Bootable 10.7  Disk
    Purchase and download Lion from the Mac App Store on any Lion compatible Mac running Snow Leopard.
    Right click on “Mac OS X     Lion”     installer and choose the option to     “Show Package Contents.”
    Inside the Contents folder     that     appears you will find a SharedSupport     folder and inside the     SharedSupport folder     you will find the “InstallESD.dmg.” This is         the Lion boot disc image we have all been waiting for.
    Copy “InstallESD.dmg” to         another folder like the Desktop.
    Launch Disk Utility and click     the     burn button.
    Select the copied “InstallESD.dmg” as the image to     burn,     insert a standard sized 4.7 GB DVD,     and wait for your new Lion Boot     Disc to come     out toasty hot.
    With this disc you can boot any Lion compatible Mac, andinstall10.7 just like you installed previous version of Mac OS X. Youcan even use Disk Utility's Restore function to image your Lion bootdisc image onto a external drive suitable for performing a cleaninstall on a optical-drive-less MacBook Air, or Mac mini server.

    tjk wrote:
    5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
    DVD: no, flash drive: if it's large enough, external hard drive: yes
    6. How much space is needed on a destination disc/disk to install Lion?
    Whatever Apple minimum requirements are.
    7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
    possibly, never tried it, it is a dmg so it's a volume all to itself, except it can't install to the same media it's on and can only install to something formatted with GUID and a OS X extended format, like a flash drive or hard drive large enough.
    DVD's can't be formatted with a GUID EFI partiton
    8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
    Speed limitation of the media and bus your using, USB 1 is a slower than a hard drive with 7,200 RPM on a Firewire 800 port
    9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP.
    The problems come from installing Lion over a existing Snow Leopard setup that isn't quite pristine enough for Lions quirkyness, has tweaks or other software installed that breaks 10.7, requiring you to fix it.
    You can try it, you've got the 10.6 clone to option boot off of and restore from.
    Cloning back and forth is a performance enhancer, not a problem solver.
    Ideally it's best to clone 10.6, disconnect, zero and install 10.6, same user name, then up to 10.6.8, then to 10.7, then install programs from fresh sources/copies and then files returned last from backup off the clone (no migration assistant or it brings trouble back)
    This will ensure the best possible performance possible with the least trouble as everything is wiped and installed fresh. Only problem being your files it there is something wrong with them, which is easy to remedy to the cause as it's the only thing not pristine.
    Once you've got a pristine system, then clone that twice, once for a immediate update other for falling back a week, two weeks or even a month back.
    Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
    Firmware is hardware specific not OS specific, of course it's possible a old version of a OS won't work with newer firmware, like 10.5 for instance perhaps because Apple has dropped all work on PPC code.
    10.6 and 10.7 are just fine with most all present firmware, however there will be a time where a new firmware update could disallow 10.6, likely when iOS X 10.8 Bobcat arrives.
    10. Any constructive suggestions on anything related to any of these steps is welcome! 
    Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
    Cloning only clones the Lion OS X Partition, not the Lion Recovery Partition.
    A comptuer that is Lion capable will boot off a media with no Lion Recovery Partition.
    You need to create a Lion Disk Assistant USB which copies your Lion Recovery Partition.
    It's in my post.
    https://discussions.apple.com/message/16276201#16276201

  • I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install?

    I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install on my 24" Imac?

    As long as you use your Apple ID to purchase it, I don't see why they wouldn't let you download the installer on one of their Macs and put it on a pocket drive.
    Or, a friend with a high speed connection?
    I agree with you about the delivery method, just trying to help you get what you want.

  • Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Read
    https://discussions.apple.com/message/15659267#15659267

  • I am having trouble trying to boot from my lion osx install disk on a 2007 macbook.  The disk ejects when I start up with the option key depressed.  Anyone have any ideas?

    I am having trouble trying to boot from my lion osx install disk on a 2007 macbook.  The disk ejects when I start up with the option key depressed.  Anyone have any ideas?
    Thank you.

    How did you get a Lion OSX install disc? They don't exist. Do you mean the gray disks that came with your 2007 MacBook?
    If you mean the gray disks, try starting up with the "c" key held down.
    What version of OSX is on your MacBook now? Have you tried booting from the Recovery partition?

  • Why is my available hard disk space disappearing?

    Hi,
    Occasionally my hard disk space will start disappearing for no apparent (to me) reason.  I'll have 15 gigs of available hard disk space that will disappear, and I'll get messages that I'm running out of disk space, interfering with what I'm doing.
    After I restart my computer, it seems to reset, but I would like to stop it altogether (as, obviously, it's not always convenient to restart my computer in the middle of tasks.)
    I tried Disk Utility, but it didn't find anything.  Are there any other legit programs I should use to solve this and other general issues?
    Or is it something I could fix myself (with only basic computer knowledge)?
    Thanks!
    L

    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    3. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    4. For more on this and very helpful tips:
        http://pondini.org/OSX/DiskSpace.html
        http://pondini.org/OSX/LionStorage.html

  • Trying to install Lion. says this disk is not enabled (journaled) - but when I look at the drive it actually is os extended journaled - Stuck! Have tried repair disk permissions and still no luck

    trying to install Lion. says this disk is not enabled (journaled) - but when I look at the drive it actually is os extended journaled - Stuck! Have tried repair disk permissions and still no luck - any thoughts? Have spent two weeks trying to get apple support and itunes to help me get lion after a hard drive fail and now they are closed and I really just want to get moving!

    Are you installing OS X Lion over an existing installation of Snow Leopard, or are you reinstalling?
    First be sure you have everything on your system backed up. Then reboot with the Command-R keys held to get to the OS X Lion recovery volume. In here, select Disk Utility and use the First Aid tab in here to run a verification on your boot drive. If there are any errors, fix them and then try the installation again.
    The next step would be to format the drive, so with your backup secured, use Disk Utility's Erase tab to re-format the drive to Mac OS X Extended (journaled), and then quit Disk Utilty and attempt the installation again.

  • Is Mountain Lion available?

    Is Mountain Lion Available? I have snow Leopard and need 10.8 at least to run photoshop elements.

    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Is Photoshop Elements 12 available in disk form, or only as download?

    Is Photoshop Elements available in disk form.... or only as a download?

    It is available in disc form from a great many retailers.

  • I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please

    I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please

    Right click the hard drive icon and select Get Info. In the new pane, on the bottom, do this:
    1. click the padlock, and authenticate with your password.
    2. change Privilege to Read & Write - just click what is there and options will appear.
    3. close the pane.

  • External Drive not showing as available scratch disk

    I just installed CC on my Yoga2 Pro.  (Windows 8.1) I have tried two different external drives, but neither shows up as an available scratch disk.  The drives do show up in Bridge as storage.  Any ideas out there?

    For product specific questions you may do better in the specific product forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right to open the drop down list and scroll

  • How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

    How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

    None of the instructions usually given for downgrading seems to mention the fact that you will lose some data in built-in applications, including at least Mail. When you installed Lion, your Mail database was converted from the format used by Snow Leopard's Mail to that used by Lion's Mail. There is no way to reverse that conversion. Therefore, you will lose your entire Mail database. If your messages are all stored on a remote server, that may not be an insurmountable problem, but otherwise you'll have to restore from the last backup you made before the upgrade, and then you'll still lose all changes to the database made since that time.
    Another fact not often mentioned is that downgrading is usually the worst possible solution to a problem with Lion. But that's the answer to a question you didn't ask.

  • I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
    Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
    Connect both computers to your local network and then share the optical drive to install the software.

Maybe you are looking for

  • Window server taking much process

    Just recently update my MBP retina to yosemite, and now it starts lagging for every application I'm in window server is taking the most percentage in CPU, and kernel_task & window server is taking 2GB of my RAM (according to activity monitor, though

  • How to modify the new mask/track feature after you've left the clip?

    After you've created an ellipse or polygon mask with the new filter feature, positioned it where you want it in the Program panel, then gone on to other editing, how do you later come back and grab that mask to move it's position?  Clicking on it in

  • Task details in Worklist did not work

    I have created a simple BPEL process which use human task flow for approval purposes. The input for the process is initiated from a DBAdapter(poll). For any changes or new row in the database, it will create a new instance.The problem is the task det

  • How Do We Add ROWSetListener To A ViewObject

    I Would like to add a RowSetListener to my view object named "CardView" (CardView which takes the debit and credit card information), so that the listener is added to the view object before it is used for any purpose. For this I have a introduced add

  • Pricing condition distributed

    Hi Experts, I would like to create a new Fret condition at header level which should be distributed on quantity (and not on net value) So i created a new condition type with indicator header condition activated and and groupe condition activated in V