Is Lion compatible with Mac Pro Intel Quad Core 3.0 GHz x 2?

I couldn't find Lion requirements. Sorry to post the question.
In About this Mac it also says:
MacPro2,1
1.33 bus speed
8 GB RAM
1.5 TB hard drive
Currently on OSX 10.6.8
Thanks
Steven

Lion Specs:
http://www.apple.com/macosx/specs.html

Similar Messages

  • Audition CC - Compatibility with Mac Pro 2012 (Quad-Core) & RME UFX

    I am new here and wanting to use Audition again after being away for years, so I apologize if this is a dumb question. In previewing a training video about Audition CC it highlighted that Audition CC is now 64 bit.  Before I download CC I want to be sure that the 64 bit part does not present a problem for me on my system.  I do not know if my hardware is 32 or 64 bit.  My question is - Will I have any compatibility issues with my hardware: Mac Pro 2012 Quad-Core & RME UFX interface and the Audition CC software?  Thanks for any light you can shed on this for me.

    It's not the hardware you want to worry about (that will be 64-bit capable, as all Macs are) but the software. If it's a recent Mac I don't think you'll have any problems at all, though - do they actually do a 32-bit release?
    The best thing to do if you're worried about this is to download the trial version and see if that's okay.

  • Is osx mountain lion compatible with mac pro (4,1) w/ raid card?

    I noticed Apple isn't selling the Mac Pro's with raid cards anymore, so it makes me wonder of Mountain Lion is compatible with my Mac Pro which uses the apple mac pro raid card.  Anyone know??

    Thanks Kappy.  I'm more interested in the RAID card compatibility.  Anyone else know?

  • Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

    I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
    -Ram swaps
    -Alternating video card in PCIe slots
    -Trying alternate video card
    -resetting pram and smc
    -Multiple tests with memtest86+ over 26hrs and no failed ram
    -Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
    -Firmware is approved firmware for early 2008 model...no new updates.
    Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
    Memtest86+ for 24hrs+ yields no problems.
    Where problems occur:
    Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
    Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
    I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
    A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
    Thanks for your help and advice.
    Regards,
    Marcos

    Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
    Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
    The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
    Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
    I suppose it is possible something tried and failed to modify the Mac's firmware.
    If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

  • Mac pro 2012 12 core 2,4 Ghz ou Mac pro 2013 8 cores 3,5 Ghz ?

    Bonjour, j'ai besoin d'un avis exterieur !
    Je suis graphiste, fais du motion design (sur After Effects donc) ainsi de la musique sur Ableton et je souhaite changer de machine.
    On me propose un Mac pro de 2012 12 core 2,4 Ghz d'occase a un prix tres honnete, mais je me demande si le Mac pro 2013 8 cores 3,5 Ghz ne serait pas plus puissant et adapté a mes besoins.
    Sachant que j'ai ouie dire que les mac récents ne sont pas super bien gérés par After effects...
    Des avis?
    Merci

    Si tu n'a pas encore fait ton choix…
    Le modèle 2013 est un excellente machine mais il induit quelques impératifs:
    - côté stocage, oublies le firewire qui ne fonctionne qu'avec un adaptateur. Les débits s'en ressentent. Quant à l'usb3, si tu envisages de laisser tous tes disques toujours allumés, ça ira. Sinon, un disque cablé mais éteint fera que chaque démarrage sera plus long que le précédent. La faute à la structure "tout externe" de l'ordi. Il te faudra donc investir dans du thunderbolt.
    - Côté disque interne, à notre époque, et pour un pro, moins de 1To ça devient vite étroit!
    Je te parle en connaisance de cause, j'ai depuis mars 2014 un hexa 3,5ghz. SSD 1To. Ram 32Go.
    Couplé à un LaCie 5big thunderbolt, c'est un foudre de guerre! C'est l'un des Mac les plus stables que j'ai connus. Et ce qui ne gâche rien, l'ensemble est ultra-silencieux!
    Quant au modèle 2012, c'est aussi une excellente machine. Comparée au 2013 4 cœurs 3,7ghz, elle sera plus rapide. Et fera jeu égal ou un peu moins que le 6 cœurs 3,5ghz. L'investissement nécessaire pourra être moins lourd mais la machine sera plus bruyante!

  • HT5219 did thunderbolt display worked with mac pro 2012 12 core ??

    i buy mac pro 2012 12 core with thunderbolt display so how i can maake it work with us ??

    Welcome to the Apple Support Communities
    If you want to use a Thunderbolt Display with your 2012 MacBook Pro, you can do it without any problem because your MacBook Pro has got a Thunderbolt port.
    If you need help to set up the Thunderbolt Display, see its user guide > http://manuals.info.apple.com/en_US/thunderbolt_display_getting_started.pdf
    Instead, if you have a Mac Pro (it looks like you have a Mac Pro because you say that it has got 12 cores), you can't use the Thunderbolt Display because the Mac Pro hasn't got Thunderbolt ports. Instead, you have to use the LED Cinema Display

  • Ati X1900 pulled from G5 quad, is it compatible with Mac Pro original ?

    I had a G5 quad that had an Ati Radeon X1900 video card, which I purchased to allow the portrait feature.
    At any rate, I've since purchased a Mac Pro and was wondering if this card is compatible with the Mac Pro 1,1
    Thanks

    No, G5 used different Open Firmware, while Intel Macs use EFI.
    The ATI 4870 is, and no idea if 5870/5770 will be. But the OEM 7300GT is something you want to replace if that is what it had. An 8800GT would be nice.

  • Airport extreme card in g4 ppc - compatible with Mac Pro?

    I have an airport extreme card in my g4 PPC. dual 1.25ghz - fw800.
    question is, can i take this airport extreme card and put it in my new Mac Pro Dual 2.66ghz intel machine?

    No, the AirPort Extreme card is not compatible with the Mac Pro.
    The Mac Pro requires a special wireless card. Apple requires installation by an Apple Authorized Service Provider (AASP).

  • AirPort Extreme card not compatible with Mac Pro???

    Hey,
    I recently purchased my Mac Pro without thinking to include any hardware for connecting to a wireless network.
    I have recently moved into a new apartment which I am keen to join to a wireless network which has just been set up by my roommate for his PC and Laptop.
    I was going to buy an AirPort Extreme card, but I have read that it is not compatible with the Mac Pro. Yet when I looked at the configure process for a new mac it was listed as one of the devises offered for wireless networking!!
    I am very confused...
    I was wondering if anyone could help me, i just need to know what hardware i will need and how it would be installed.
    thanks, all help will be greatly appreciated!
    Mac Pro   Mac OS X (10.4.8)  

    the mac pro takes a slightly different airport express card. you have to purchase it at the retail store and have them install it. in my experience they will not allow you to purchase one and install it yourself due to the difficulty of installing it. best thing to do take your macpro into a apple retail store and see what they can do.

  • Help: A bluray drive compatible with MAc Pro 1.1 2006 2007

    Hi,
    Seems my factory bundled Pioneer dvd drive is bad and I need a compatible bluray drive now.
    I have read that there are some issues with some models of  Pioneer and LG drives.
    I tried to install older LG DVD drives I had here and they just kept ejecting dvd discs.
    However, they were able to burn cd-Rs.
    I was advised to search for Pioneer Bdr-208dbk
    and LG WH14NS40MP  .
    Here in Brazil we have similar names, maybe they are adapted for our country market.
    I am using Toast 10 with OS 10.6.8.
    MAc Pro 2.66 8GB RAM.
    Any help is greatly welcomed!
    Thanks in advance!

    <http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=BD12XMP INT&Category_Code=STORBD&Product_Count=1>

  • DBT-120 Bluetooth 2.0 Adapter not Compatible with Mac Pro V 10.4.10?

    Hello!
    I recently purchased a
    *D-Link DBT-120 Bluetooth 2.0 USB Adapter* (My Mac Pro is *V 10.4.10*)
    in order to resolve the Mac Pro / Bluetooth issue.
    I put in the CD for installation and all of the files (.exe, etc.) read as PC files.
    I was told by D-link that the adapter mentioned above is not compatible with this higher version of the Mac Pro.
    However, I have read that other users have had success with the DBT-120.
    Does anyone have any recommendations?
    Thank you!
    Jeff

    What exactly IS the mac pro/ bluetooth issue?
    Some Mac Pros were (are?) shipped with incorrect labelling and connection of the AirPort and Bluetooth internal antenna wires. The causes reduced Bluetooth range.

  • DBT-120 Bluetooth 2.0 Adapter not Compatible with Mac Pro?

    Hello!
    I recently purchased a
    *D-Link DBT-120 Bluetooth 2.0 USB Adapter* (My Mac Pro is *V 10.4.10*)
    in order to resolve the Mac Pro / Bluetooth issue.
    I put in the CD for installation and all of the files (.exe, etc.) read as PC files.
    I was told by D-link that the adapter mentioned above is not compatible with this higher version of the Mac Pro.
    However, I have read that other users have had success with the DBT-120.
    Does anyone have any recommendations?
    Thank you!
    Jeff

    What exactly IS the mac pro/ bluetooth issue?
    Some Mac Pros were (are?) shipped with incorrect labelling and connection of the AirPort and Bluetooth internal antenna wires. The causes reduced Bluetooth range.

  • Is the r7 250 compatible with mac pro 2,1?

    Hi, i am planning on buying a new R7 250(goo.gl/om5ybi) for the mac pro 2,1 currently running 10.8.5. I was wondering if my mac is compactile with this gpu and do i have to reflash any BIOS or have any bootloaders?

    Try looking here:
    User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

  • Looking for USB Hub compatible with Mac Pro 8 Core (early 2008)!

    I need a good, reliable USB Hub. I was looking at a D-Link with 7 ports but I read a review on Amazon saying it didn't work well with 8 core Mac Pro. The reviewer said the Mac only recognized some of the time upon start up and he had to unplug and replug to get it going.
    Not sure if this was user error or faulty product.
    Anyone have any experience with a good reliable 7 port USB Hub? Perhaps even with this D-Link?
    Thanks!
    Zap

    There are also reports (see http://www.hardmac.com today) of over loading USB ports on Mac Pro... even if you only use the available ports and hubs (like Cinema Display which should be getting its own power, but does not).
    I would strongly recommend a PCIe controller first.
    http://eshop.macsales.com/search/Aaxeon

Maybe you are looking for

  • FrameMaker 8 (Unstructured) - How to Find/Change "Referenced File" location globally?

    Hello, First off, I have a FrameMaker 8 (Unstructured) book that links ALL of its graphics, to a separate graphics folder on my network drive. With that said, I am hoping to do the following: 1. Create a mirror copy of "Book A" and place that copy in

  • Free songs and money GONE

    I had a significant number of free songs and money, and all the sudden it disappeared. What happened to it? The thing was, even when I had it, iTunes always charged me anyway, and I couldn't figure out how to use my money and free songs. Is there any

  • Infocube line item dimension and performance optimization

    Hi, I remodelled an infocube and line item dimension contains only one characteristics set as line item dimension. previously the dimension as one characteristics but it wasn't set as line item dimension. and when I checked the SAP_INFOCUBE_DESIGNS f

  • Page Reload after Submit

    Good Morning, I want my page to reload after a submit. The code I am using is not working correctly. I have a region with a static ID:OPLAN I created a branch with url: f?p=&APP_ID.:12.:&SESSION_ID.::&DEBUG.#OPLAN It doesn't go back to the OPLAN sect

  • How long does it take to sync to Lightroom Mobile?

    I'm very frustrated with LR mobile.  I try to use it to process raw images from my 5DIIIafter they have been loaded into Lightrom. Just today, I checked the box to sync a collection of 26 pictures.  After many minutes, Lightroom says "Syncing 2 Pictu