Is LISTENER_ hostname mandatory for failover?
Oracle Version:10.2.0.4, 11gR2
Platform : Solaris 5.10
Isn't the default listener (LISTENER) enough for enabling failovers within RAC nodes. I've been told that,on eache node, you must create non-deafault listeners with the naming convention
LISTENER_<hostname>to enable failovers between nodes. Is it true?
In pre 11g, when you install Oracle Clusterware, Oracle by default create listener LISTENER_hostname. I don;t think there is a specific requirement to use this naming convention. The important thing is that your database parameters LOCAL_LISTENER , REMOTE_LISTENER are set correctly so that PMON processes of database instances are aware of database services running on each database instance.
Regarding 11g, Oracle use SCAN and local listener both and you may find end points that listener is listening on, in the listener.ora file. Please refer http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
Regards
Harish Kumar
http://www.oraxperts.com
Similar Messages
-
Want to configure BACKUP VPN in asa 5505 for failover link
Hi,
Current i'm having 2 isps one tata and another one reliance iwant to configure the backup vpn for reliance ip for same peer ip which tata vpn had configured
i mandatory to configure same SA,ENCRPTION,IPSEC POLICY,KEY,LIFETIME...etc for failover vpn also.Hi michael,
First of thanks for reply.
Can we do it by public certificate or DNS entry e.g. both ISP Public ip address entry will be in DNS and user will hit particular DNS name. You r right that once link down so user will disconnect but when he will retry then he will connect via another link.
Is it possible??
Ashish -
Is a gateway mandatory for RAC environment?
Question:
Is a gateway mandatory for RAC installation, general on RAC environment?
*..when yes, why?*
Many thanks
I make this test with my only one RAC node
1. Run with gateway:
[oracle@linux1 ~]$ crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE linux1
ora....X1.lsnr application ONLINE ONLINE linux1
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora.orcl.db application ONLINE ONLINE linux1
ora....l1.inst application ONLINE ONLINE linux1
ora....test.cs application ONLINE ONLINE linux1
ora....cl1.srv application ONLINE ONLINE linux1
[oracle@linux1 ~]$ srvctl status database -d orcl
Instance orcl1 is running on node linux1All thing seem correct!
2. run without gateway (blank setting):
[oracle@linux1 ~]$ crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE OFFLINE
ora....X1.lsnr application ONLINE OFFLINE
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE OFFLINE
ora.orcl.db application ONLINE OFFLINE
ora....l1.inst application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora....cl1.srv application ONLINE OFFLINE
[oracle@linux1 ~]$ srvctl status database -d orcl
Instance orcl1 is not running on node linux1Something is false!By default, the server's default gateway is used as a ping target during the Oracle RAC 10g VIP status check action.
Upon a ping failure, Oracle will decide that the current interface where the VIP is running has failed, and will initiate
an interface / internode VIP failover.
In above case, we used just one node for CRS installation, so the VIP coudn't failover to other nodes and thus reported additional error like :
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.dbtest2.vip'.
Try ->
A parameter FAIL_WHEN_DEFAULTGW_NOT_FOUND in the file
$ORA_CRS_HOME/bin/racvip to address this problem.
The following steps will fix the VIP starting problem for above mentioned scenario.
1- stop nodeapps
2- As root,
vi the script $ORA_CRS_HOME/bin/racgvip and change the value of
variable FAIL_WHEN_DEFAULTGW_NOT_FOUND=0 .
3- start nodeapps and you should see the resources ONLINE
You may proceed with netca and dbca to create a RAC database after this. -
Cisco ASA - 2 Site to Site routes needed for failover -Is possible?
3 physical sites. 2 ASA 5510 (routing mode_). 3rd site is in between ASA sites. 2 different connections. Depending on which link goes down, a certain set of Network Lists for Site to Site VPN is needed to place the 3rd site subnets where they belong depending on which link dies. The tunnels all work. Here is my wonder: Can I automate this somehow in my environment (all Cisco 3750/3560/2960) so that I can leave both tunnels in place so that if either link dies, the appropriate tunnel is picked for failover? Running 8.03 code on ASA. Using EIGRP (love that protocol). Anyone have any ideas?
You can implement failover or loadbalancing . Use this configuration examples for your configurations.
http://cisco.com/en/US/products/ps6120/tsd_products_support_configure.html -
WBS element field mandatory for specific sales order
Hi Friends,
I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
RatnaHi,
As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
Hope this will resolve ur problem.
rgds
Dhiraj -
Setting up Access Manager and Directory Server for Failover.
I'm setting up 2 Access Managers AM1,AM2 and 2 Directory Servers DS1 and DS2 for failover. I've connected AM1 and AM2 to DS1. Suffixes of DS1 is replicated to DS2. Any change made to AM1 is replicated to AM2 as expected. I just patched AM1 with Access Manager patch 1 and the version information for AM1 shows 7.1 126359-01. I followed the same procedure to patch AM2 but AM2 still shows ver 7.1.
How do I make sure both Access Managers are patched to the same version?
I'm able to authenticate to one IIS6 site and authentication is passed on to Outlook Web Access on AM1 but when I shut down AM1 to test failover to AM2 OWA prompts me again for password. How do I resolve this?
On AM1 http://host.domain/amserver/UI/Login?realm=sso successfully logs in but the same on AM2 gives Warning that "You have already logged in. Do you want to log out and then login to a different organization?"
Please help !!!I'll answer what bits I can:
Q: AM showing the same version?
A: No idea on this one. I would have expected the operation you described to have produced the right answer. Check that neither your application server nor your web browser are caching old pages (ctrl-F5 in my browser)
Q: How do I resolve re-authentication on failover?
A: The AM documentation includes a deployment example that covers pretty closely what it is you are trying to achieve:
http://docs.sun.com/app/docs/doc/820-2278
Specifically, the problem you are describing is related to session failover. The sessions are stored in a local DB so when you failover the backup server does not store the same information and hence requires a reauthentication. The section of the above doc that deals with this is here:
http://docs.sun.com/app/docs/doc/820-2278/gdsre?l=en&a=view
Q: "You have already logged in" warning
A: No idea. Sorry.
R -
Error Message FMBAS202 Year of cash effectivity mandatory for budget cat 9G
Hi all,
I activated BCS and use update profile 000350 (Separate PB/CB budget lines; standard), we tried to post simple FI posting and the error come up
==============================================================
Year of cash effectivity mandatory for budget category 9G
Message no. FMBAS202
Diagnosis
The FM update profile does not support the year of cash effectivity for commitment/actual values (posting ledger 9B). However, the year of cash effectivity is mandatory in BCS budgeting for budget category 9G and FM area 0100: the minimum value in this case is 2009.
System Response
Processing of the commitment/actual data record stops.
Procedure
Deactivate the year of cash effectivity for the corresponding budget category 9G and FM area 0100 in the IMG activity Choose Budget Category.
===============================================================
So I click the link and it goes to Define Budget Category screen where we assign budget category (9G) and time horizon (1) to a FM area, but not mention of deactivating year of cash activity.
My question is:
1. Where is the button to deactivate the year of cash effectivity?
2. What's the difference between budget category 9B and 9G? Both are Commitment Budget.
3. I dont remember assigning budget category 9B to an FM area. Where is the setting?
ThanksHi,
When you go to IMG - Public Sector Management - Funds Management Government - Budget Control System (BCS) - BCS Budgeting - Basic Settings - Definition of Budget Data - Choose Budget Category, what's the settings for 'Time horizon' field? It should be blank for 9G(commitment), if you don't work with cash effectivity.
9B is posting ledger, while 9G is budget ledger. You don't have to assign 9A/9B to FM area.
Regards,
Eli -
Tax code field under INVOICE Tab to be Mandatory for Inter Company PO
Dear All,
In MIRO Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001.
How do we set as mandatory fields for those two intercompany document types.
Regards,
TejaHi
If u want to maintain tax code as mandatory field in PO?
Then SPRO- SAP IMG- MM- Purchasing - Purchase order- Define document types
In this check the filed selection key for the document types.
Then select the SPRO- SAP IMG- MM- Purchasing - Purchase order- Define svreen lay out at document level.
In this for the field selection key select GR/IR control and click on tax as required. and then save
It will not allow to create PO with out maintaoning tax code.
If u want to do tax code as mandatory in MIRO
Then Go to OLMRLIST and make changes accordingly.
Thanks
Raman -
Freight Charges Mandatory for Particular Vendor?
Dear Experts,
i want freight Charges Mandatory for Particular vendor while creating PO in pricing conditions?Hi
firstly check on whta keys you have maintained the condition records
if itis with various keys like vendor plant material etc , then check is it satisfying all???
now for your purpose just create access sequesnce with VENDOR (plant can be included ),
now delete all old records created for the fright condition
now assign this vendor in the Fright condition , also you can mark this condition as cant process manually if you dont want user to make any change to thsi condition )
create new record only specifying vendor as key point
now create Po and check
Edited by: Kunal Ingale on Jan 31, 2012 11:10 AM -
Can't create a service for failover on 2 node windows2008 RAC
To create a new service for failover,
1)Enterprise Manager can not be used by prompting an error: many people already mentioned.
2)Net Manager could create a service but it fails to test showing:
Attempting to connect using userid: qa1
The test did not succeed.
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Q1: According to doc, it should be used ONLY for Non-cluster and single instance. Is this why I have an error?
Q2: If not, what should I need to do to fix this problem?
3)Using command line like
C:\Users\administrator.QAPF2>srvctl add service -d ORCL -s NLS -r orcl1 -a orcl2
C:\Users\administrator.QAPF2>srvctl start service -d ORCL -s NLS
C:\Users\administrator.QAPF2>srvctl status service -d ORCL -s NLS
Service NLS is running on instance(s) orcl1
C:\Users\administrator.QAPF2>sqlplus /nolog
SQL> connect sys as sysdba
SQL> alter system register;
When I try to connect from client using "jdbc:oracle:thin:@orarac-scan:1521:NLS" connection string, I got the following error:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:orarac-scan:1521:NLS
Note: If I use "ORCL1" instead of NLS, then it works. ORCL1=SID on node1, NLS=service name.
Q3: Are there anything I should do more?
Q4: How do I add a listener for this new service(NLS)? I added the following using Net Manager but no effect:
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = orarac-scan)(PORT = 1521)))Yes, it worked with sqlplus commandline(local or from remote) like:
C:\>sqlplus system@NLS
SQL*Plus: Release 11.2.0.3.0 Production on Fri Apr 20 17:11:19 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
From a remote client:
C:\oracle>sqlplus qa1@NLS
SQL*Plus: Release 11.1.0.6.0 - Production on Tue Apr 24 10:12:31 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Enter password:
Connected to:.............................................................................
However, if I use the connection string suggested by you:
C:\oracle>sqlplus qa1@\"orarac-scan:1521/NLS\"
SQL*Plus: Release 11.1.0.6.0 - Production on Tue Apr 24 10:14:30 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
additional information:
From a remote client:
C:\oracle>nslookup orarac-scan
Server: admin01.qalab01.nextlabs.com
Address: 10.23.57.5
Name: orarac-scan.qapf2.qalab01.nextlabs.com
Addresses: 10.23.57.35, 10.23.57.34, 10.23.57.36
The followings are from node1:
C:\>srvctl status service -d ORCL -s NLS
Service NLS is running on instance(s) orcl1
C:\Users\administrator.QAPF2>srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node orarac2
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node orarac2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node orarac2
C:\Users\administrator.QAPF2>srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node orarac2
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node orarac2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node orarac2
C:\Users\administrator.QAPF2>srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): orarac2,orarac1
C:\Users\administrator.QAPF2>srvctl config service -d orcl -s NLS
Service name: NLS
Service is enabled
Server pool: ORCL_NLS
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: NONE
Edition:
Preferred instances: orcl1
Available instances: orcl2
Edited by: 928042 on Apr 24, 2012 10:36 AM -
What is true business proposition for SAP XI being mandatory for mySAP SRM
Hi,
Would like to know the true business/technical propostion which makes SAP XI the mandatory middleware for mySAP SRM business scenarios
1. Plan-Driven Procurement, and
2. Catalog Content Mangement
Appreciate a reason beyond single vendor/TCO dope we all know...
tnx,
renjiHi Ranjan,
Solution Manager is not mandatory for SRM 7 implementation.
Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
It is just a guilde. All things might not be required for your project.
We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
Best Wishes,
Tushar. -
Material Number mandatory for PR exceptP for Service Purchase Requisition
Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
roshhi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh -
Account assignment mandatory for material
Hi,
While creating contract i am facing this warning message..i can ignore this message , but what is the root cause for it.
Error is :
"Account assignment mandatory for material 100000040 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category"
I checked Qty and value update in OMS2 also.
It is maintained.
Then what is wrong?
UtsHi,
Account assignment determination depend on the valuation class. When your account assinged category is mandatory in that case go and see the account modifier assigned in account assinged category. After that verify the G/L account in OBYC for key GBB and account modifier and respective valuation class assigned in material master.
If the entery does not exist then system will give you an error message.
Regards
Prashanth -
Account assignment mandatory for material 702 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
How to rectify this errorGo to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
If not,
a. Use a different material type
b. or Use an account assignment category.
Regards,
Anantha -
PR / RFQ refence mandatory for PO
Hi Experts,
Please help me in setting PR or RFQ (quotation) refence mandatory for creating PO...
can it be done using standard config or do I need to create transcation variant...
it's urgent
KrishnaHi
following are steps to make PR mandatory for PO creation
SPRO --> Materials Management --> Purchasing --> Authorization Management --> Define Function Authorizations for Buyers
Create Function Authorization for buyers as "PO only with PR" , assign this to Buyer authorization profile..
Assign Parameter EFB thru SU01 for buyrer
If u have created Function Authorisation
Go to SU01>enter user ID> Go to Parameters-->assign that parameter value against EFB parameter( If EFB parameter ID is not there Add it and assign parameter value i.e.Function Authorisation value there
EG.01
Also make sure that
In OMET in details of function Authorization>Possible ref. objects>Tick only Ref. to purchase requisition and not anything else
Vishal...
Maybe you are looking for
-
Exception Encountered while attempting to send message[JMSExceptions:045103
Hi - I need help on one the issue I am facing. It seems some minor mistake but unable to find that. I have a EJB code deployed on weblogic. I am using OSB business service to invoke EJB and publish data to JMS. I have setup all queue and JNDI properl
-
How to remove a 3inch CD from the slot loading drive??
I have am external adapter for various IDE external devices. The drivers came on a 3 inch CD.I put the CD in the slot it did not appear to go all the in and it will not eject using the normal methods. Anyone run into this situation?? Bob
-
How to use text variables?
Hi, I have a text variable 'ZEMAIL' with data element 'COMM_ID_LONGu2019.The routine corresponding to this is 'GET_ZEMAIL' in 'ZHKMIT30' program. Now I have to retrieve emloyee E-mail ID (infotype 0105 i.e.PA0105 DB table, subtype 0010, field USRID_L
-
Why does firefox only show one window in my taskbar when i multiple tabs open it worked yesterday
today when i booted my computer firefox would not open everytime i clicked on it so i tried to redownload it after it installed it actually just upgraded and now it works again but when i have more than one tab open it will only show active tab in my
-
Photoshop Elements 12 for animation
I've just bought Photoshop Elements 12 with a view to using it to create simple 2D animations. However, all the tutorials seem to either ignore tihs use or are based on earlier versions and I can't seem to follow them as 12 doesn't work quite the sa