Is logic 9 compatible with any of the mbox's made by digidesign?

Is Logic 9 compatible with any of the Mbox's made by Digidesign?

It´s not Logic but the OS that determines compability.
MBox 2 series don´t work/ work poorly with Lion.
MBox 3 should work with Lion, Don´t know about ML.
Give Avid their usual 6 month to get things together....

Similar Messages

Is the new simcity compatible with any of the macbook pros

The case for the game doesnt have any information for macbooks or anything for apple but only for windows so i was just wondering if i can just buy the game and play it on a 2011 macbook pro because thats all i have i also played diablo 3 on my macbook pro and it worked fine but i dont know if simcity is just strictly for windows

It is.

HP Smart web printing is very useful web printing extension which is not compatible with any version of firefox till now but compatible with Internet Explorer any version. So Please do correction. Thanks

[There is a link below from where software can be downloaded and after installing this you will see that it is not compatible with any version of Mozilla Firefox of any Window version (7, XP).]
[http://ftp://ftp.hp.com/pub/softlib/software10/COL20395/dj-56929-3/HP_Smart_Web_Printing_v4.6.exe

It is up to HP to make that program compatible with Firefox.
That application last worked in Firefox 3.5, but HP was always very lax in updating it for a new version of Firefox. Usually they didn't bother to update it until like halfway through the "run" of a particular Firefox version. It worked for like 6 months and then a new version of Firefox was released, and it didn't work for like 6 months until HP got around to fixing it - then the cycle repeated.

Part of my iphone 4 is french after the ios 5 update... it never did this with any of the other updates... how do I get it back to English?

Part of my IPhone4 is French after the ios 5 update... it never did this with any of the other updates....can anyone tell me how to get it all back to English?

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Can my charger, which originally shipped with my iPod A1040 be used with any of the following models without damaging the battery?

I know this is a complicated question, but any detailed explanation as to why or how I appreciate it as I have tested and it does actually charge the 1136, 1051 and 1236, but I have been reluctant to try it on the A1288.
Question:
Can my charger, which originally shipped for the iPod A1040 be used with any of the following without shortening the battery life or damaging it?
iPod A1136 (tested, does charge)
iPod A1051 (tested, does charge)
iPod A1236 (tested, does charge)
iPod A1288
Thanks,
Josh

Yes, you can use the iPod Mini charger with the new 5th Gen iPod.

Path does not chain with any of the trust anchors, but included in cacerts?

I have implemented a CA that has a self-signed certificate:<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE>
I have a cert from this CA: <CN=realAnonym>
With this cert, I want to make a SSL connection to some server with client authentication.
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> is included in the cacerts-file of the server.
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (Part of trusted CA's) in my opinion match with <CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (second certificate in certificatechain of <CN=realAnonym>).
But it doesn't ???
execute the server with -Djavax.net.debug=ssl,handshake gives:
<CN=GeoTrust Global CA, O=GeoTrust Inc., C=US>
<CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited,
OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net>
<CN=Equifax Secure Global eBusiness CA-1, O=Equifax Secure Inc., C=US>
<OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
>
<CN=VeriSign Class 1 Public Primary Certification Authority - G3, OU="(c) 1999 V
eriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign
, Inc.", C=US>
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (Part of trusted CA's)<OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 2 Public Primary Certification Authority - G2, O="VeriSign, Inc.",
C=US>
<OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use onl
y", OU=Class 1 Public Primary Certification Authority - G2, O="VeriSign, Inc.",
C=US>
*** ServerHelloDone
main, WRITE: TLSv1 Handshake, length = 7383
main, READ: TLSv1 Handshake, length = 3784
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=realAnonym (client certificate)Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 127355714484211456591612779667470666909980708602501730899657524388577
49850208930275081977822300971032883864332221450883863390126466833031349667099122
38288059447802849568096837640845268449147677304455823253593898716430967402259872
25271396467992796337646786345774935629264123070013042903682567551911526037603651
public exponent: 65537
Validity: [From: Fri Nov 18 00:00:00 CET 2005,
               To: Fri Nov 03 12:04:28 CET 2006]
Issuer: C=BE, L=Leuven, O=KUL, OU=JurgenAgten, CN=ps (Clent certificate issuer) SerialNumber: [    0107a404 7764]
Certificate Extensions: 3
[1]: ObjectId: 2.1.2.3.102 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 02 31 00 ..1.
[2]: ObjectId: 2.1.2.3.101 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1D 31 1B 30 19 13 02 4C 64 02 02 03 E8 13 06 ..1.0...Ld......
0010: 61 7A 65 72 74 79 13 07 41 72 62 69 74 65 72 azerty..Arbiter
[3]: ObjectId: 2.1.2.3.100 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 82 09 F7 30 82 09 F3 03 82 09 6B 00 AC ED 00 ....0......k....
0010: 05 73 72 00 19 6A 61 76 61 78 2E 63 72 79 70 74 .sr..javax.crypt
0020: 6F 2E 53 65 61 6C 65 64 4F 62 6A 65 63 74 3E 36 o.SealedObject>6
0030: 3D A6 C3 B7 54 70 02 00 04 5B 00 0D 65 6E 63 6F =...Tp...[..enco
0040: 64 65 64 50 61 72 61 6D 73 74 00 02 5B 42 5B 00 dedParamst..[B[. .
09D0: C8 18 22 75 E9 23 56 96   9E 7E 71 C5 7B 6B 95 5B .."u.#V...q..k.[
09E0: DF AB 6D 0A 39 0C E3 74   F1 BA 5A 9C 50 76 0B 3E ..m.9..t..Z.Pv.>
09F0: 13 79 20 2E B5 B1 FC 83   76 97 A2                 .y .....v..
Algorithm: [MD5withRSA]
Signature:
0000: 78 DC AF 04 6F D9 F2 54 6A 5D CB 99 4E 45 90 25 x...o..Tj]..NE.%
0010: 8D 4B 24 17 BF BB B9 1D AB 1D 7C EF 3D F5 01 9C .K$.........=...
0020: 49 9C 81 CC 64 0C F4 38 37 F5 BB CF 28 F7 FB 2F I...d..87...(../
0030: 5E 91 21 E3 A1 B0 92 90 F7 DC 92 F6 A8 6C E3 78 ^.!..........l.x
0040: 36 B7 36 B8 05 6B 17 8D C8 CF AF D2 9B F6 89 B2 6.6..k..........
0050: 5B 20 E4 14 0B 98 1C 50 69 FC CC C1 6F 6C F0 EA [ .....Pi...ol..
0060: 63 1E 64 71 BA 41 3D B6 23 7A 72 91 01 B4 B2 23 c.dq.A=.#zr....#
0070: 40 2D 62 48 E0 84 0E FA D7 EF E1 9C F5 92 DF 42 @-bH...........B
chain [1] = [
Version: V1
Subject: CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE (Client certificatechain[1] the CA) Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 117566584630083419996551735329369567910739541932314407531248741596590
25394436071793849489119529408325801928292164157908793562030900052755912331352764
88920380150146179015561996002426862508085279249965768014151302583170908492349232
49673303864165396475282399840755746956422674084689146502252850565325504345529883
public exponent: 65537
Validity: [From: Fri Nov 18 16:31:50 CET 2005,
               To: Thu Feb 16 16:31:50 CET 2006]
Issuer: CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE (is self-signed)SerialNumber: [    437df3e6]
Algorithm: [MD5withRSA]
Signature:
0000: A5 0B D2 F7 C9 4A BF E5 00 C2 42 50 DF EB 33 A6 .....J....BP..3.
0010: DB 1A 7F C5 38 DE 4A FA 23 09 5C 09 5D 68 73 CD ....8.J.#.\.]hs.
0020: 72 B7 A4 9A 50 30 ED BE 35 28 6D 19 21 77 B6 32 r...P0..5(m.!w.2
0030: FE 83 22 CE EF 7F F4 3E 6E 52 B0 E9 9D 14 EA 48 .."....>nR.....H
0040: A4 0B DC 41 C2 86 D4 48 6A AD 49 46 84 10 FA 69 ...A...Hj.IF...i
0050: 7D C6 81 0C AF BA 88 D5 C1 30 BA 1A 5A E5 D3 24 .........0..Z..$
0060: 0A 3E 15 5A B5 99 A8 B2 32 80 85 D4 72 3F F4 60 .>.Z....2...r?.`
0070: 18 BA 11 3A 91 35 D9 F9 CA D3 C9 AE 2F 3E 39 E1 ...:.5....../>9.
main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
main, WRITE: TLSv1 Alert, length = 2
main, called closeSocket()
main, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: Path does not chain with any of the trust anchors
main, IOException in getSession(): javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: Path does not chain with any of the trust anchors

It is not even done the first validation part on the client side ( if you have not cut the debugs).
On both, your client and your server, you should add your CA certificate to the trust set. You can first leave the client authentication aside, and do it on the client code to be sure the client authenticates the server's certificate properly; later you can add the same functionality to your server when checking the client certificate. The mechanism provided to deploy this, is either through system property javax.net.ssl.trustStore to introduce your truststore or introcuding your own trustmanager in the codes.
In case, you want to set it dynamically in the program code, you should consider using your extension of X509TrustManager() . Aussuming it be YourTrustManager, you go like this:
//YourTrustManager implements javax.net.ssl.X509TrustManager
SSLContext sslContext = SSLContext.getInstance("SSLv3");
YouTrustManager tm = new YourTrustManager();
TrustManager tms[] = {tm};
sslContext.init(null, tms, null);
HttpsURLConnection.setDefaultSSLSocketFactory(sslContext.getSocketFactory());Further, you might need to change the default hostname verifier on the HttpsConnection before you can establish a successful handshake with the pattern you used for your certificates.
Read http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html in case this does not make it clear enough.

Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

I have an iPod Touch 2 with iOS 4.2.1. This is the highest version that works on this device. I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
Apple does make it harder than it needs to be. There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
App backups are your friend since iTunes has no way to keep older version of apps.

Is iPhone compatible with GSM in the Meddle East

Is iPhone compatible with GSM in the Meddle East

While roaming from a US based At&t account. Almost certainly yes. However the iPhone is carrier locked to At&t and requires a US billing address so unless you have an approved international account, you are going to be roaming amd risk getting your service cancelled.
Its far better to wait for the iPhone to be sold locally. It is and still will be a GSM phone when that happens.

My macbook air did not come with any of the ilife apps? why is this

I bought a Macbook air, but it did not come with any of the ilife apps? why is this

Launch App store from the Dock.
Sign in with your Apple ID and password.
Click the "Purchase" tab at the top.
You should see a line saying "You have 3 Apps to Accept".
Click the "Accept" button on the right.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
You can call AppleCare.
Best.

Will be the NVIDIA GeForce 620M graphic card be compatible with any of Adobe Premiere series?

Recently I adquired the GeForce 620M graphic card, trying to resolve a problem with my Adobe Premiere Pro CS4 software (Premiere suddenly stopped working, and the only problem was the graphic card, the NVIDIA GeForce 210 series I used to have).
In order to fix that, I buyed the 620 series, but in the Compatibilities page of Adobe (http://www.adobe.com/content/dam/Adobe/en/products/premiere/cs6/pdfs/c ompatibiltiy-list-premiere-pro-cs6-only-hw-compatibility.pdf), in any of the Premiere series, CS4, CS5, CS5.5, CS6..., appears the 620M graphic card, so my cuestion is if the card is too recent to admit Premiere Pro.
Regards.

Employees and beta test people are not allowed to comment on any future Adobe plans
Any card will work with CS4 to send the display to the computer monitor
Hardware acceleration using CUDA cores is only available for CS5 and later
The official list is only updated as Adobe has staff time to completely test & certify any individual nVidia card... For many others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file... again, this is ONLY for CS5 and later

When will be the NVIDIA GeForce 620M graphic card be compatible with any of Adobe Premiere series?

Recently I adquired the GeForce 620M graphic card, trying to resolve a problem with my Adobe Premiere Pro CS4 software (Premiere suddenly stopped working, and the only problem was the graphic card, the NVIDIA GeForce 210 series I used to have).
In order to fix that, I buyed the 620 series, but in the Compatibilities page of Adobe (http://www.adobe.com/content/dam/Adobe/en/products/premiere/cs6/pdfs/compatibiltiy-list-pr emiere-pro-cs6-only-hw-compatibility.pdf), in any of the Premiere series, CS4, CS5, CS5.5, CS6..., appears the 620M graphic card, so my cuestion is if the card is too recent to admit Premiere Pro.
Regards.

Ask in the Premiere forum. On a more general level, though, CS4 will never be officailly supported, only current versions, if at all.
Mylenium

Is Logic compatible with the HD Native card?

We have Protools and an HD Native card, also we still have a 192 HD TDM interface. Is logic Pro compatible with this hardware?

Nope, sorry...
Standard AirPort:
802.11b (Optional)
http://www.everymac.com/systems/apple/powermac_g4/specs/powermac_g4_733_qs.html

Is Nokia 3110c compatible with any Phone Applicati...

Hello everyone! Please tell me is the Nokia 3110c model is capable of any sort of seperate Application like Opera Mini. If so, what sort of applications is it compatible with ? Also, there is a default Music Player installed with the device. Can any other seperate Music Player be installed except the default one ? Can the default Music Player be uninstalled and then again reinstalled ? Please let me know about the software compatibilty of Nokia 3110c

That depends on your needs. It still does everything it did when it was new.
The bigger issue is that many carriers are shutting down their EDGE networks (AT&T in the U.S. for example). Once they do so, it won't even function as a phone.

Is the new Ipod Touch 5g compatible with all of the ios 6 features and is the new Ipod have the exact same design as the Iphone 5 for example square sides, instead of curving sides?

Does the new Ipod have the same features as the Iphone 5 in terms of panorama, or like the new Isight camera? Like the same features/ design?

it is compatible with most iOS 6 things, the main difference is just the fact that it doesn't have 3G or 4G, which limits how much it can use Siri or Maps.
it does have panorama, and a 5 MP iSight camera. the design is different. it is a lot thinner, it has curved edges, and at no part of the side is it flat, same for the top and bottom. that is NOT the case for iPhone. also the iPod doesn't have a mic. on the front.
hope this answered your question.
just remember this for iOS 6: pretty much everything that doesn't always require internet the iPod can do. if it is something liketurn by turn direction, unless you have wi-fi in car, it wont work.
if you need siri for anything outside of wifi, unless it's something on the hard drive itslef, i.e. setting up reminders, it wont work for thing such as facebook posts, looking for restaurants, etc.

Atheros AR5007EG Wireless Network Adapter - With any driver: "The device instance name is invalid"

Hello there,
I was trying to install various "Atheros AR5007EG Wireless Network Adapter" drivers, with versions ranging from 2007 to 2010, both from the manufacturer and specifically for this computer (a Fujitsu Siemens Esprimo Mobile) and others from here:
http://www.atheros.cz/atheros-wireless-download.php?chipset=22&system=3
All of them are for Windows Vista 32bit.
The computer had previous drivers installed and working, but also had a network problem. In the process of figuring out what was causing it, I tried to install newer drivers to see if that was the problem. It turns out the network problem was due to a different
thing that is now fixed (some dependencies of the WLAN Configuration service were turned off), but I'm still stuck installing the new drivers.
TL;DR:
However, every time I install new drivers, after install, Windows says that
"The device instance name is invalid", regardless of what drivers I install. I even tried to install drivers for different hardware in that slot just to see what it told me and IT STILL gave me the same error. I also tried to uninstall the
current driver, checking the box to delete the driver's software, running CCleaner and then deleting
"athr.sys" from the Windows/Drivers folder and
"oem8.inf" from Windows/Inf as those files were referenced in the driver's properties. The install still gives me the same error.
The fact that it gives me this error with any driver leads me to believe it's Windows' fault and not the driver's.
Note: I am translating from the original in Portuguese. "The device instance name is invalid" is the closest/correct translation and seems about right with the info I find online regarding the english version of Vista and how it refers to devices.
This (https://groups.google.com/forum/#!topic/microsoft.public.development.device.drivers/yFa_XnlcLJQ) and this (http://finderr.net/windows/pt-PT/O-nome-da-inst%C3%A2ncia-do-dispositivo-%C3%A9-inv%C3%A1lido-/2082573452) also seems to confirm that, though it
doesn't help me. It may be that the text is actually different in english Vista but I also searched for driver instead of device or stuff like "The device instance name appears to be invalid" and can't find anything either.
I also did SFC /SCANNOW a while ago and it found no errors. I then repeated it again after this problem and this time, SFC found errors BUT it couldn't repair all of them. Here is the CBS log:
https://www.dropbox.com/s/bayum2rsezxpmre/CBS.log
Thank you for the help!
EDIT: The Notebook model is a Fujitsu-Siemens ESPRIMO Mobile V5535 and their support drivers can be found here (after specifying the OS and model):
http://support.ts.fujitsu.com/download/ShowFiles.asp
EDIT2:
The last SFC /scannow scan repaired everything left to repair. The system restore option can't be used because the earliest one still has the (suposedly faulty) drivers installed.
This computer has a Win Vista serial number, but no CD and the second partition doesn't have any kind of backup. The second partition is empty though. So, as a last resort, if I really don't have a choice, I'll try to do an upgrade install to see if that fixes
it and if that still doesn't fix it I'll have to move everything in the users folder to the second partition and format the first which is a bummer :/
EDIT: Here is the setup.api.log that was inside C:\Windows\Inf and details the instalation process of all the drivers:
https://www.dropbox.com/s/tyxs1e4r7rxofch/setupapi.dev.log
I'm still trying to read into that setup.api.log file.

So, can I assume that the only way to fix this error is to download an iso of Windows Vista, unninstall my service packs, upgrade install Vista, run Vistalizator to change the language to Portuguese and then install Service Pack 1 & 2?
EDIT: Alright, so I formatted the thing since the driver bug wouldn't give me a break. The details on that can be found searching for the same thread title either on tomshardware or vistaforums if anyone happens to find this looking for the same error.
I have a real knack for bumping heads with errors that nobody else gets that somehow turn into unfixable bugs. At least if someone else searches for this problem they'll know what to do.

Is logic 9 compatible with any of the mbox's made by digidesign?

Similar Messages

Maybe you are looking for