Is Logic Pro compatible with the Akai EIE Pro?

see title. does Logic work with the Akai EIE Pro USB audio interface?

This is from the AKAI web site ....  "The EIE can be used with virtually any music software program like GarageBand or Pro Tools and connects plug-and-play to Macs or PCs; there is no driver installation required"

Similar Messages

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Is the Logic app compatible with the Digi002 interface?

    Does anyone know if the App is compatible with the Digi002?  I'm using Lion.
    I downloaded it in February and it wouldn't connect to my mbox2. Want to try again but don't want to pay if it's not going to work.
    Thanks

    You downloaded it in February? From where?
    Logic will connect with any device that has compatible core audio drivers or is "system compliant" with core audio.
    If your mBox2 wouldn't connect it's because the Avid core audio drivers are not 100% Lion compatible.
    As I recall the audio side of the Avid drivers will work but the Avid core audio MIDI driver needs to be upgraded, the current ones cause a MIDI timeout.
    Someone with a Digi002 will have to answer but I suspect the same problem you had with the mBox2 might occur.

  • What is the best graphics card compatible with the original Mac Pro?

    I have an original Mac Pro with dual 2.0GHz DC Xeons.  It currently has a GeForce 7300.  I would like to know the best Apple graphics card it can support, and the best "flashed" PC graphics card it can support.  I would like to be able to play games, but it doesn't have to be on BEST settings.  What are the best GPUs that are compatible with Mac Pro 1,1?
    Thanks!!

    You may have to work at getting the ATI HD5870 to work with a Rev 1.1 MacPro, but the 5770 should be fine.  It's not as good a card as the 5870, but much faster than your original, and also a lot cheaper than the 5870!  That said, neither is particularly cheap.
    If you're techno savvy, you can have a much bigger choice, and can use a generic PC card and 'flash' it to work with the Mac.  If you use Snow Leopard or Lion, you may get it to work straight off, as they have drivers that work on many of the PC cards.

  • Will my old monitors are compatible with the new Mac Pro?

    I'm thinking about buy a new workstations (MacPro) but I need to know if my Monitors are compatible or I need to buy a new ones.
    I have a Cin Dsplay 23-inch DVI Early 2007 and a LED Cinema Display (24-inch).
    Kind regards

    The 24" LED's Mini DisplayPort plug will go into a Thunderbolt port on the Mac Pro.  The 23" DVI display will need a Mini DisplayPort to DVI adapter.
    <http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

  • Is the corsair DDR3 16GB 1333 SO-D KIT compatible with the Mac Book pro 2010?

    I'm upgrading my Mac book pro 2010 and was wandering if this ram works. I already tried the PNY 8gb ram, but snow leopard wouldn't install with it.

    I'm pretty sure it can take 16GB fine, after all Apple has said up to this day that non-Retina Macs can't do so much RAM yet here we are, a whole bunch of happy 16GB users (hint: my Mac is carring the Corsair CMSA16GX3M2A1333C9 kit).
    However, stedman is right. Your Mac uses 1066MHz RAM, the 1333 MHz RAM is for 2011 models.

  • Is the SSD in the 15" MacBook Pro Retina compatible with the 13" MacBook Pro Retina?

    A friend upgraded his Retina MacBook Pro 15" from 256GB to an OWC 480GB SSD.  He was going to sell me the 256GB SSD he pulled out of his rMBP.  I was thinking of buying the base 13" rMBP and installing that 256GB SSD from the 15" rMBP.  Will that work or are they not compatible.  Eyeballing it, they look to be exactly the same size so physically it would fit but not sure if they are not compatible for other reasons.

    none of what you mentioned - use a damp micro fibre cloth to wipe your macbook retina.
    make sure it's damp and not wet.
    using a wet cloth can cause some drips between the keys that might create an issue - so make sure it's just damp.

  • I cannot set my Akai EIE PRO as default

    Hello I've recently bought the Akai EIE Pro as an external sound sound card, but I've had some problems with it.
    When I work in logic it automatically switches to the EIE Pro and I can work with my monitor speakers. But when I try to listen to music in itunes it doesn't reconize my EIE Pro and it will switch automatically to the internal speakers.
    Things I've tried to solve this problem so far
    - I've reset my permission settings.
    - I've deleted the driver for this program and installed the one most up to date. I've deleted it using the uninstall included on the cd and by going into my library
    Macintosh HD > Library > Audio > MIDI Drivers
    Macintosh HD > Users > [Your User Name] > Library > Audio > MIDI Drivers
    - I've used snoize's midi monitor to see if it even received midi signals and it did and it works within logic so there should be no problem there.
    - I've restarted the mac with the audio interface connected.
    - I've tried to setup my EIE Pro as default by using the system preferences > Audio and to put the input/output to the EIE PRO but it simply goes back to the built in devices the moment I click on the EIE.
    As you can see I've tried alot of solutions I've found on the internet does anyone of you have a similar problem or does anyone knows how to solve this?
    I work on OSX Lion 10.7.4 and all the software I used has been bought so the problem can't be there either.
    I hope someone can help me out

    is acrobat X listed as an installed program:  http://www.dummies.com/how-to/content/add-or-remove-programs-in-windows-8.html

  • Is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer

    is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer?

    Click here.
    (69952)

  • The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro.  What do I need to do?

    I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro.  I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher.  What can I do to update the operating system on my Mac Book Pro? 

    10.5 will be harder to find & more expensive, I think I'd go for 10.6
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Apple no longer has it for sale.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • HT1338 I cant get my iphone 5 to be compatible with my mac book pro. I've been trying to update my itunes but it wont let me because it tells me i dont have the right software is there anything that I can do so I can sync my phone to computer?

    I cant get my iphone 5 to be compatible with my mac book pro. When I plug the iphone 5 in it tells me that i need a newer version of itunes 10.7 and I currently have 10.6. I checked for updates in my itunes and it says i dont have any. So i have gone to the itunes website to try and redownload itunes which i believe it 11.7. When I try and download that version it tells me the software on my computer doesn't suppor that version. I try to update my software and it says there is not software updates available right now.  Is there anyway I can get my iphone 5 to synce to my itunes?

    In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.

  • Is the Macbook Pro with retina display compatible with the share disk utility?

    Hi,
    I was wondering whether, since the macbook pro with retina display has no cd rom drive, whether the MBP is compatible with the share disk utility like the mackbook air
    VKB

    there should be no reason why it wouldn't be, as that's a feature of the OS, not the hardware.

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Is the late 2013 mac pro compatible with 10.8.5

    Is the late 2013 mac pro compatible with 10.8.5

    No, except through emulation inside a product such as VirtualBox, Parallels Desktop, or VMware Fusion.
    (105011)

Maybe you are looking for

  • BD Question. How to tell if subVI input is wired?

    Greetings, Inside a subVI, I'm looking for a method to determine if an input is wired from a higher-level VI, or if I'm working with data that was stored in the input control as default data. Any ideas?

  • New SAP Installations - Antivirus Exception List

    Hi Experts, We've installed vanilla SAP products (ERP6, Netweaver 7, Solution Manager 7) on Windows 2008/ Oracle. They all standard Central Instance builds and have default directory structure layouts as per the installation documentation. A question

  • [Solved] Asus L1366 mobo, cpu fan speed control

    Hi, everyone, I finally have this new core i7 system, to replace my old AMD athlonx2.  I have one question about the CPU fan speed control. I remember that in my old system, the cpu fan speed control works out of box, no configuration is needed. But

  • Sun messaging server 7 installation

    Dear All, I am trying to install sun messaging server 7 on an X86 machine. However, when i try to run the commpkg install or upgrade i get the below (noting that i am using DS 6.0) bash-3.00# pwd /opt/sun/comms/CommsInstaller/bin bash-3.00# ./commpkg

  • Commit in a trigger,Confusion

    Hello experts, I am new in oracle using oracle sql developer in windows7.I am little bit confuse in that I am using commit in a trigger as given : create or replace trigger comt after insert on tbl_city declare pragma autonomous_transaction; begin co