Is Logic Pro X compatible with M Audio Fast Track Ultra ?

I'm running Logic 8 Pro with M-Audio Fast Track Ultra.
I'd like to upgrade to Logic Pro X.
Will these components be compatible?

If it has a Mountain Lion compatible driver then it should work. (Its not about LPX compatibility.. its about OS X compatibility that matters in almost every case)
See here for the drivers...
http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Ultra-Drivers
V2.2.2 is 10.8 compatible however there are several threads in their forums that indicate issues with 10.8.3 and higher...
Here is an example..
http://community.m-audio.com/m-audio/topics/driver_for_m_audio_fast_track_ultra_ mac_mountain_lion_10_8_3
Given that your interface is no longer a supported item.. and Avid have taken over M-Audio.. it might be that there will be no further updates leaving you unfortunately, with an out of date and no longer supported piece of hardware... which frankly is typical of M-Audio...
As a quick aside... This is why I stick with Motu equipment.. and have done so for many, many years now. Their support both for new and legacy devices is and has always been.. excellent.. and my original Ultralite Mk1 which is at least 7 years old now I believe, is still fully supported in the latest OS X version. using the latest Motu Drivers..
Anyhow.. Check with M-Audio/Avid to find out if this has been resolved......

Similar Messages

Is Logic Pro X compatible with M-Audio Fast Track Pro?

Hi,
new Logix Pro X looks very interesting - does anyone know if M-Audio Fast Track Pro is compatible with it (couldn't find any topics so far..).
Thanks for your help!

Back to basics..
I googled Fast Track Pro compatibility with OS X 10.8.x and found several incompatibility issues and no experiences in version 10.8.4 so far.
So there is a risk that when ugprading Lion to Mountain Lion 10.8.4, Fast Track Pro wouldn't work any longer.
And purchasing LPX for 180e and a new MOTU audio interface for 230e over doubles the initial price of LPX alone..not so attractive deal anymore..
Do you know if there are any good ways to get back to Lion after installing ML if there seems to be problems with Fast Track Pro? I'm using MacBook Pro with preinstalled Lion. I googled too many articles on this and I'm still confused if going back to Lion is possible or not.
Thanks again!

Trouble hooking up krk rokit 5's with M-Audio Fast track Ultra

Hey everybody,
I just picked up a pair of krk rokit 5 monitors and for some reason i am having a really hard time getting sound. i connected the rca into output 1 and 2 on the fast track ultra. I set the FTU as the output and input for logic and in the mac settings. NO SOUND zip nada! I might be doing something wrong so if anyone has any advice or know what to do, lemme know! thanks! I would appreciate it!
joel

Hi,
don't use the RCA. most probably you have mistakenly connected the S/PDIF outputs of the Fast Track to you Rokits. You'll need either a standard TRS 3,5'' connector cable - the plugs look like the standard stereo headphone plugs - not the little ones, but the bigger ones (if-ya-no-wod-i-mean).
Or you could use a TRS-XLR cable. Either way, you'll need to use the correct outputs on the Fast track, since there are more than one. I'd suggest you use outputs 1 and 2 (for left and right channel).
Fox

No sound with M-Audio Fast Track Ultra

Hi community!
I'm trying to get sound out of my monitors with no luck.
I'm running on an OS X 10.7.5. I'm aware of the issue people are having with the 2013 iMacs, but mine is 2012.
The M-Audio software is reading the sound, and I have my preferences set to the interface but nothing!
Help? Thank you.
(Cables are fine, volumes are up, power is on...)

The Avid company appears to be who acquired M-Audio.
•Avid - forums community:
http://community.avid.com/forums/default.aspx?
They have a user forum; as I found while looking around
and there was an item relating to FastTrack Ultra drivers*.
So it is possible to ask a question in an appropriate place
and hope that someone there has an adequate reference.
*This discussion pertains to Mavericks, however.
http://community.avid.com/forums/t/124237.aspx
•Pro Tools Hardware - Avid Pro Audio Community:
http://duc.avid.com/forumdisplay.php?f=35
Hopefully you can at least find some answers without
a need to get some product support code for a fee.
Good luck & happy computing!
edited 2x

Is Logic Pro X compatible with my Apollo Twin?

Is Logic Pro X compatible with Apollo Twin?

The question is: Is Apollo Twin "Core Audio" compatible.
Logic uses OSX's core audio system so if the Apollo has Core Audio drivers that are compatible with the version of OSX you're using then Logic will see the Apollo Twin as an available audio device you use. This is done using Logic's built-in Audio preference selection.

Is Logic Pro X compatible with Digi 002?

Is Logic Pro X compatible with Digi 002?

It s a problem for me to upgrade from my late 2007 macbook Core2Duo 2,16ghz system running snow leopard and protools 7.4.2 through digi 002 rack, Command 8 and emagic Unitor 8mk2, to my new macbook pro i5 2,5ghz...
I chose this MBP cos it has both firewire and thunderbolt BUT... people told me digi 002 would only work as a 16 input channels. No way to use the ADAT inputs from the digi... And to me it s the most important thing : i need the extra 8 inputs and mainly use the digital mixer convertors instead of the digi 002 convertors. So haow about you? does the adat work properly ?
Another problem : command 8 seems not to be supported either.
so before buying logic pro x , i need to know if it s gonna work normally and completly : spdif, adat and analog input, midi /i/o AND command 8 integration.
I m not sure it might work either on Avid software ( a shame !!)
I m ok to work again with logic after my 7 years using only protools IF i dont have to buy another audio interface and another midi controller...
here is the link for the last driver :
http://avid.force.com/pkb/articles/download/Digi-002-003-Drivers
here is a link for the command 8 drive rfor those who are lucky enough to have a protools 10
http://avid.force.com/pkb/articles/en_US/download/en379411
How is it possible that an "upgrade" finally results is a downgrade, as my new system cant match with the old one...
Unitor 8mk2 is perfectly working on 10.8.5 hop eit will work on 10.10 either...

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi,
Yes the Scarlett 2i2 will work with Logic Pro or Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
Hope this information helps.
Best regards.

Is logic pro 9 compatible with os x lion

Is logic pro 9 compatible with mac os x lion

Hi,
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807

Will Logic Pro accomodate a M-Audio Fast Track Ultra?, Will Logic Pro accomodate a M-Audio Fast Track Ultra?

Will Logic Pro accomodate a M-Audio Fast Track Ultra?, Will Logic Pro accomodate a M-Audio Fast Track Ultra?

M-Audio is a bit slow getting drivers out but they eventually get it right so take heart... even companies like Focusrite don't have 100% compatible drivers for some of their hardware.
Not sure if -all- of the recent USB changes were released on time. I'm regularly in touch with a couple of plugin developers and both say Apple is notorious for last minute changes. Don't know if it's true or not.

No signal with M-AUDIO Fast Track

Hello,
I just got the Logic Pro 8 and I have only used garageband.......I used to be fine with M-AUDIO Fast Track......but now in the logic studio I'm not getting a signal......I went to preference click on fast track as the input source but not even getting the smallest signal........I have no clue what I'm doing wrong.....does fast track even work with logic pro?.....
Thanks

I have a FastTrack, and in my experience, it has many issues. The biggest is that it craps out on a regular basis, say every couple hours, or if sleep mode occurs, etc. Then, in order to 'wake it up' again, it requires cycling the power, which in many cases will cause the entire system to hang (no mouse movement, nothing) for about 2-4 minutes! I have the latest drivers for it, and my system is clean. This is simply bad driver code on M-Audio's part I would recommend anyone who is thinking of buying this unit, look elsewhere. Go with MOTU or etc.
I know that doesn't help much, but it needs to be said...

M-AUDIO Fast Track Ultra with Final Cut 7

I have been using an M-Audio Fast Track Ultra device with Final Cut 6 and could listen to Quicktime 5.1 audio files in the timeline in full surround. Since I installed the Studio 3 upgrade with Final Cut 7 (same OSX version), this is not working anymore. I just have stereo output. When I start my backup version of Final Cut 6, it still work fine.
Any clue how to fix this in Final Cut 7 ?

Hi,
The 5.1 audio preset was already selected in the setting and each of the 6 audio tracks is assign to the proper speaker. It was the same set-up in the v6 but it was working which is not the case in the v7. There might be a new setting somewhere.
Thanks for trying.

M-Audio Fast Track Ultra 8r HELP!!

Hello
I am in desperate need of assistance.... I have been using M-Audio Fast Track Ultra 8r for some months and it has worked perfectly... only today (just when I needed it most) it stopped working when I plugged it in as usual.
It makes a popping sound and the green and red LEDs along the front panel flash respectively and it will not be found by Logic 9... or anything else for that matter.
I am running MAC OSX 10.6.6 on a Macbook pro
2.53 GHz Intel Core Duo
4GB
I remember this did actually happen once before but I simply put the original CD in and re loaded the driver from there and it seemed to work... only, that CD fell foul to a toddler and is basically knackered...
The latest drivers don't seem to be working and I have done everything I can find on here to try and solve it including...
- Downloading lastest drivers
- Different leads and ports
- Downloading latest update combos for snow leopard from apple site, and repairing disc permission in utilities
- Rebooting holding cmd-alt-P-R which apparently has something to do with resetting RAM
I am not much of a techie... I just like things to work!
Any help gratefully received... I can't afford a new interface and I have lots of work to do
Many thanks
T

HI ! I JUST HAVE THE SAME EXACT PROBLEM ! I DONT KNOW IF M-AUDIO HAS TO CREATE THE NEW DRIVERS TO WORK WITH OSX 10.6.6 OR IS SOMETHING GOING ON IN OUR COMPUTERS.
I HOPE SOMEONE CAN HELP US AT THIS, I REALLY NEED TO GET IT WORK AGAIN ..... ILL APRECIATE ANY HELP ... THANX A LOT !!

No Audio when recording through M-Audio Fast Track Ultra USB interface

Hi,
I am trying to record my drums using Logic Pro and by obtaining the audio through 4 microphones connected to an M-Audio Fast Track Ultra. Even though the interface is on, installed, registered, and configured in Logic's audio preferences, there is no sound whatsoever. The recording shows that it definitely picked up audio and that the sound levels were moving, but there is no playback. Any advice??
Thanks.

Are you using Logic 8 or 9?
What are you trying to hear Logic's output through?
If you're expecting audio output through built-in audio, and you're using Logic 9, make sure your Fast Track is set as the input device, and built-in audio is set for the output device (both in Logic's audio preferences)
However, if you're using Logic 8 or 7, you need to create an aggregate device if you're using built-in output.
Details here:
http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763
OR
use the FastTrack's audio outputs to drive your monitoring, NOT your built-in audio.

Problema con scheda audio fast track ultra e Mavericks

Dopo aver scaricato OS X Mavericks non funziona piu' la scheda audio Fast Track Ultra anche dopo aver aggiornato i driver rilasciati dalla casa (versione 2-3-0) Cosa posso fare? Grazie!!

Te cuento yo tambien he tenido muy mala experiencia con fast track en lion y mountain lion el problema que describes lo solucione con el driver 1.9.2 pero en protools o logic no puedo usar las salidas 3 y 4 por que suena como entrecortado bien sea el daw q este utilizando o el itunes bien eso lo he sabido llevar pero lo mas fatal es que cuando trabajo en protools suele aparecer el kernel panic y debo reiniciar he investigado y por informe de error siempre suele ser la fast track pro a pesar de que compre su adaptador de corriente pensando que era por la escasa alimentacion usb que tiene ( falencia fatal que no tienen otras interfase de m audio como las fast track c 400 o 600 en avis nunca dan respuesta y en m audio pues que en paz descanse por que ya murio! desde q avid se apodero del basto negocio la unica opcion es psarse a mbox o a interfases hd!

M-Audio Fast Track Ultra - not getting any input!

I have been using M-Audio Fast Track Ultra to do some basic recording in GarageBand '09. I've never had a problem, but today i cannot get an audio signal to input from a mic or instrument. It seems that GarageBand is automatically setting the track recording level to zero and is greying it out. i can no longer control it. The audio OUTPUT works fine and i can use the fast track to monitor, but there is not input. btw, i tried using the built in audio on the MacBook and it works fine. is this a setting issue with Fast Track somehow? can anyone help trouble shoot this issue for me? Thanks!

futureman22 wrote:
i cannot get an audio signal to input from a mic or instrument.
have you set GB to use it:
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
GarageBand is automatically setting the track recording level to zero and is greying it out.
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is Logic Pro X compatible with M Audio Fast Track Ultra ?

Similar Messages

Maybe you are looking for