Is Lotus Symphony compatible with Mac Lion

I just installed Mac Lion 10.7.1.  When trying to open Lotus Symphony 3, it doesn't work

I figured it out.  Instead of trying to open Symphony from the dock, I opened one of my documents from Finder.  Symphony then opened.  I was also able to open it from the dock after that as well.

Similar Messages

  • Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28

    Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28.? Its got the nividia GeForce 8600 w 256 mb graphic card and 4 gig of ram

    ML specifications say Mid 2007
    How to identify Macbook Pro models

  • How can I find Lion to download it to my Mac Boook/  It is the white plastic model and is now running Snow Leopard.  It has 4 GB of Ram but this computer is not compatible with MOuntain Lion.  I cannot find Lion anywhere.

    How can I find Lion to download it to my Mac Book?  It has Snow Leopard and 4GB RAM but it the white plastic model and is not compatible with Mountain Lion.  I have been told by the Genius Bar that it will handle Lion.

    That underpowered model is better left on 10.6.8 for performance reasons, also the fact that it's dated and 10.7 will likely require you to buy alll new software to replace the PPC based software your currently using.
    If you insist, then call Apple via phone and they will sell you 10.7 Lion and provide a link to download it.
    My 2¢ is to save up for a new machine, as that one is about to kick the bucket, they only last about 4.5 years or so depending upon use/enviroment.
    If your having problems with 10.6.8, perhaps some of the links here can assist, 10.6 is faster than 10.7 in fresh install tests.
    Why is my computer slow?
    ..Step by Step to fix your Mac
    How to erase and install Snow Leopard 10.6
    How to safely defrag a Mac's hard drive
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Is my mac compatible with mountain lion?

    is my mac compatible with mountain lion? Serial Number #W8******XAG
    <Edited By Host>

    Computer compatibility:
    http://support.apple.com/kb/HT5444
    http://applehelpwriter.com/2012/08/03/will-mountain-lion-work-on-my-old-mac/
    Model Number:
    http://www.mactracker.ca/index.html
    http://support.apple.com/kb/HT1635 (Macbook model numbers)
    Applicationc Compatability. Power PC applications are not supported. You can partition your hard drive so you can run PC applications:
    http://roaringapps.com/apps:table

  • Is Photoshop elements 11 compatible with Mac Mountain lion?

    Is Photoshop elements 11 compatible with Mac Mountain Lion?

    the older version of Photo Shop is no longer supported.
    Don't know which version you mean, but if you mean PSE, then versions 6 and up will work.
    You can't migrate any version of PSE, though, from one disk to another. It must be installed freshly on each machine, since adobe doesn't care about the apple developer guidelines and PSE is not a tidy mac app package--the PSE installer strews stuff all over your hard drive, and you can never move it and get all the necessary bits.
    What I was talking about is if you had a computer with 10.6 or 10.7 and PSE installed on it and then upgraded to mountain lion. In that case it's essential to go into the user library and delete any existing preference files before running it after installing 10.8.
    The instructions to install PSE in mountain lion are to put the disc the drive or to double click the downloaded .dmg file to mount it, and then to run the installer.

  • Is Elements 6 for Mac compatible with new Lion operating system?

    I'm planning to buy a new iMac with OS X Lion. Will the Photoshop Elements 6 for Mac program that I am currently using be compatible with the Lion operating system?

    Adobe's official response about any software and any major operating system update is that since the software wasn't tested on the new OS, they don't consider it compatible. Just as they never update the system requirements to show updated versions of the compatible OS. They just don't go there at all. If you called them they would say no, but not based on experience or experiment, merely on policy.
    I don't think there's anything especially complicated--based on what I hear in real life, people who don't have Open in Rosetta turned on when they upgrade to lion are mostly okay, while there's no way to make it go if you did have it set for Rosetta. I would guess a new install would be fine, but I haven't had a chance to try it out myself yet. Scanning and such are likely to have problems, and of course older ppc plug-ins won't work anymore.

  • What applications are not compatible with Mac OS X 10.7 Lion?

    What applications are not compatible with Mac OS X 10.7 Lion?
    http://ow.ly/5Iz09
    This link covers many more apps. http://roaringapps.com/apps:table
     Cheers, Tom

    Lion upgrade questions and answers:  Apple Support Communities

  • What version of Blackberry desktop manager is compatible with Mac OS 10.7 Lion

    What version of Blackberry desktop manager is compatible with Mac OS 10.7 Lion?

    I think you're going to have a problem with that.  http://forums.crackberry.com/mac-users-f62/desktop-manager-os-lion-624231/
    Try BlackBerry support  >  BlackBerry Support

  • Is my mac pro compatible with mountain lion?

    Is my mac pro compatible with mountain lion/ 2 x 2.66 Ghz Dual core processors?
    Any help would be appreciated. Thanks
    William

    And FBDIMMs which use to cost $300+ for 8GB can now be had for... 2 x $34.
    I paid $300 2 x 512MB August 2006,, then 2 x 1GB $400 March '07
    So as long as you only need 16GB you are safe, it is when you need 4GB, or the rare 8GB FBDIMM and 32GB or more, that yes, time to part ways and get a system that supports cheaper DDR3.
    Except, right now, 10.8.2 'broke' support for more than 64GB and there were people depending on and using 96GB.  Or that more than 48GB also 'broke' the Apple Pro RAID card; a card that still does not support 3TB drives. 10.8.2 does though provide support for more current Nvidia cards (10.7.4 also showed support just not for GTX 6xx series). 3rd party graphic support has always been a weakness, until now.
    Apple Mac Pro is a workstation. Except when it is not. It is still not clear how they missed these things.
    What 32-bit EFI won't get you is 64-bit kernel mode and abilty to fully use more powerful graphic cards or memory addresses for a single process beyond 4GB or graphic card support with more than 2GB (and 2GB use to always fail in OS X in the past).

  • Is the new Photoshop Creative Cloud compatible with MAc OS X Lion?

    Is the new Photoshop Creative Cloud compatible with Mac OS X Lion 10.7.5?

    Yes, according to the system requirements page at Adobe:
    http://www.adobe.com/products/photoshop/tech-specs.html
    Photoshop Creative Cloud will run on Mac OS X v10.7 or v10.8

  • Is Dreamweaver 8 compatible with Mac OS X Lion 10.7?

    Does anyone know if dreamweaver 8 is compatible with Mac OS X Lion 10.7? Want to update  all my hardware with iCloud, which means I need to move from OS 10.6 to 10.7, and I still want to be able to upload changes to my current website until my new site is built (in another application next year)...thanks!

    From what I've been told (have been unable to get a good solid answer though) Lion DOES NOT have Rosetta to run PPC software or UB software. Everything Mac has to be Intel only to run in 10.7

  • Is Corel Painter Essentials 4 compatible with Mac X v10.7 Lion.

    I was wondering if Coral Paonter Essential 4 is compatible with Mac X v10.7 Lion.
    By looking at all problem it is best to wait 3 or 4 weeks.
    Thanks
    simon

    It should say which OS it works with on the side of the box (or download site) or on the manufacturers website?
    Regards,
    Colin R.

  • VMWare Fusion version 3.1.3 compatible with MAC OS X Lion

    Hi, does anybody know if VMWare Fusion version 3.1.3 is compatible with MAC OS X Lion? I need to emulate windows 7 on my mac. Thanks!

    Hi Andreas
    Your message prompted me to have a quick check at my own VM network settings.  I've got a Win7 BootCamp partition based VM, and 2 Linux VM's running DocuWiki and Squiz.  On each of these I'm using bridged connections without issue.  After my initial problem with Fusion after my upgrade my VM network connections had changed to NAT.  All I had to do was change these back and specify Ethernet as the transport (I'm not one for using autodetect settings).
    It may be that your DHCP server is needing a reboot.  I've got a Netgear router on my network here that acts as my DHCP source and I have on occasion had to restart that to kickstart IP address allocations again.  I would try putting your Linux VM back to bridged networking and setting a manual IP address from your main networks IP range.  If that gets you on to your main network, then I'd try a restart on the DHCP server.

  • I'm currently running 10.6.8. My Mac is not compatible with Mountain Lion. How can I get Lion?

    I'm currently running 10.6.8. My Mac is not compatible with Mountain Lion. Is there a way I can upgrade to Lion?

  • After replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?

    after replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?
    any suggestions on how to fix this ?

    what version of iPhoto are you using? i can't begin to answer that - it is no longer listed in my applications & has only a shadow of its icon in the dock
    what version did you have before the drive replacement? same answer
    what system version are you running? 10.8.5 - the one i was using when the hard drive died
    what exactly do you see when iPhoto attempts to launch? -it doesn't attempt to launch - i get a message saying "You can’t use this version of the application “iPhoto” with this version of OS X. You have  OS X 10.8.5. The application requires OS X 10.9 or later".
    what have you tried? wringing my hands ! i daren't try anything after the hard drive crash
    where is your library located? there is an iPhoto library folder on my desktop with random photos & albums - not all - put there by me - i vaguely remember a problem with iPhoto when i upgraded from snow leopard
    did you apply any updates or upgrades just prior to the problem occurring? after the drive replacement i uploaded saved data from a week old back up and found iphoto looking somewhat sick - no updates were offered in software updates
    are you running a "managed" or "referenced" library? i'm afraid i do not know what that means
    what type of Mac? a macbook pro
    how much free space on your boot drive? about 380 GB
    thank you very much for your questions - i hope i find some answers 

Maybe you are looking for

  • Text entry boxes in CP6 - Enter key to validate input does not work in Safari?

    I'm using Captivate 6 to create a step by step walkthrough of some different processes that are commonly completed in my workplace. Some of the example processes have portions where text is entered to simulate a process the end user might need.  I ha

  • Mass ressetting of  cleared documents

    Hi, I have a requirement to reset and reverse  one lakhs cleared documents. can i know is there any t.codes / program were in i can reset all documents in mass. Thanks in advance. Moderator: Please, search SDN

  • Sending PO (PDF attach.) via email: adding email body text

    Hi, I need to send Purchase Orders to Vendors as PDF attachments to emails; I have successfully configured all the necessary: For Output Type NEU 1) Access to conditions (General Data) set to X 2) Dispatch time 3 Send with application own transaction

  • Book color and size on indb pdf

    Help needed please The problem started when my 8x10 abridged PB version arrived and the colors are way off with a strong magenta cast. I used CMYK just like before but THIS time I followed the printers instructions and didn't make any changes to the

  • Removing a white border around the Extension I'm building

    Hi, I have a CS Extension that I'm building, and while working on the UI I have noticed that there is a white line all around the extension, which I cannot get rid of. I've attached a screenshot showing an example of this white border. See under the