Is Mac mini (G4 PPC) compatible with latest AirPort Express?

Hi,
I'm trying to help a friend get his Mac mini (PPC) networked up to his ADSL connection. I was intending to use an AirPort express which I would wire to the mini over ethernet, then connect to his main wireless network that way. Would this be OK? Is the AirPort utility compatible with his machine also? Thanks!

You will need to do what is called a Wireless Distribution System setup on the Airport Express for it to share the wireless of another wireless router in the house. That way it will echo the internet to the Mac Mini over ethernet.
Some Mac Mini G4s came with built-in Airport Extreme cards, whereas others you had to get a special build to order Airport Extreme card. The 1.42 Ghz Mac Mini was built-in whereas the 1.25 Ghz had to be build to order. This would only effect if you wanted the Airport Express to have a wireless signal to your Mac Mini.

Similar Messages

Mac Min cannot see PC with either Airport Express on ethernet connections

I am trying to network a Mac Mini, G4 Power Book, a PC laptop and PC desktop so far I can get the Mini to see the G4 and PC laptop but not the PC desktop. I have an Airport express and all but the PC desktop work OK with it. The PC desktop can see the Airport, which I have called MitchBVI, but when I try and connect to it nothing happens. The wireless card in the PC is a Linksys WMP5G. I have not enabled security yet as I wanted to get the whole network operating first.
I have tried linking the Mini to the PC with an Ethernet cable and if I do that the PC can see the Mini but not the other way round.
The fact that the PC laptop and the Mini can see each other suggest to me I have the correct permissions set on the Mini. As the PC desktop can see the Airport Express I assume that the Linksys card is working OK. As the PC desktop can see the Mac when the Ethernet cable is connected it would seem whatever permissions are needed on the desktop are set correctly.
Any suggestions greatly appreciated.
Thanks
Mitch

Thanks I had found your site and changed the MSHOME and WORKGROUP to a diffferent name MITCH that is how I got it working in part. My Powerbook can see the Mac Mini and so can the PC. The former through a wireless connection the later by ethernet. I can ping the IP address of the PC from the mac mini but cannot make the connection.
For a while on the PC i actually had a wireless connection but could not access the net with it and it dropped out again. Maybe having an ethernet and wireless connection is the problemalthough with the wireless disabled that has not helped.
I had a spare Linksys card and tried replacing it but that did not help. As I said in my first post other PC laptop works fine.
Thanks

Mac Mini core duo upgraded with Atheros Airport Extreme

An update for those interested - In a posting Nov 12, 2010,
https://discussions.apple.com/message/12574450
Al Cellier said : Earlier this year I upgraded my mid-2006 Mac Mini (Core Duo) with an (Macbook Original Wireless WIFI Card 802.11n AR5BXB72 - Atheros) Airport Extreme Card to get N-WiFi. That works fine in Leopard 10.5.8; but in 10.6.4 & 10.6.5, I can't get connected to my router. Is a new driver needed for 10.6 ? Network Utility / Info Tab / Network Interface (en1) reports "Model: Wireless Network Adapter," as (802.11a/b/g/n). As an aside, the Bluetooth seems much flakier now than with the original card.
The update, as of July 21, 2011 has that now that I have installed 3 antennas onto the WiFi card instead of just one, and now the Mini works great in Snow Leopard 10.6.8 !!!
We are getting full 300Mbps status on the n protocol.
No added drivers or tweaking, just the antennas and the system update (system update alone was not enough).
Mac user since 1984, and an optimist ...

I purchased 2 extra antennas (I found the seller on ebay; they are small circuit boards with attached cable and tiny connector). They sit just outside the box at each rear corner, and are taped to the housing; the cables were fed into the unit thru the ventilation slots, carefully routed to the wifi board where they snap into place. Unfortunately I didn't take photos inside; I could photograph the antennas sticking out, if you want.

Newer mac mini airport utility can't work with older airport express

Hi anyone who can help me out.
I have a relatively new mac mini (2012), and a much older airport express. I can accesss the internet no problem, but I cannot use the airport utility to chane the password on the airport expres. when I try, I get this message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." I have the latest version of Airport utility (6.3.1), which is supposed to work with all generaions of airport express. I need to change the password, but I do not have any of the original set-up disks for the airport. How do I fix this?
Thanks for your help.
liametmanu

Unfortunately, AirPort Utility in Lion and Mountain Lion no longer supports the older wireless "b/g" versions of the AirPort Express. This would include model numbers A1084 and A1088.
Please locate the model number on the side of your AirPort Express devices to verify the version that you have.
If you have another Mac running the Leopard or Snow Leopard operating system, you can use AirPort Utilty on that Mac to administer the older Express. A PC could be used as well.
If you cannot use another Mac or PC, then you might want to consider trying an unsupported method to install an older version of AirPort Utility on your Mountain Lion Mac. No guarantees can be offered that this will be successful since Apple does not officially support this method, but it does seem to work for most users.
See this thread for more details:
https://discussions.apple.com/message/22940547#22940547
If nothing seems to work, the final option....likely the one that Apple wants you to use.....would be to buy a new AirPort Express.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

Is MAC Pro (late 2013) compatible with Intel E5 or E7 Series 10 core CPU

Is MAC Pro (late 2013) compatible with Intel E5 or E7 series 10 core CPU?

http://macperformanceguide.com/MacPro2013-CPU-upgrade.html
Someone did some testing and these Xeon processors scale differently, turbo-boost means it can put a core to sleep when it isn't needed and give more to the cores that are.
But, the number of apps that do use more than 8-core are in short supply.
Then there is the contention between cooling and whether the cpu or the twin GPUs get preference, OS X won't allow both to ask for full 100%.
We assume you know all there is about cpu scaling and usage and just need to see which ones are on Intel's list that are pin compatible and have the right thermal requirements and such.
Fall is always IDF and v3 of the E5
https://software.intel.com/en-us/forums/topic/531053
http://ark.intel.com/products/series/81065/Intel-Xeon-Processor-E5-2600-v3-Produ ct-Family#@All

Can I mirror my 3rd generation iPad on my Mac mini core 2 duo with 10.6?

Can I mirror my 3rd generation iPad on my Mac mini core 2 duo with 10.6?

You would need OS 10.8.x for mirroring. But no you can mirror your iPad to your mac mini See here for more information http://support.apple.com/kb/HT5404

Mac Mini Upgrade to Lion with USB: can't download Server Add On

I have a Mac Mini on Snow Leopard and I bought the Lion USB key to upgrade to Lion. I have a weak internet connection. Unfortunately, the first thing that happens when I insert the USB key and start the upgrade is that it needs to download the Server Add On. What is very bad is that it says to look on the App Store app to monitor the download but there is nothing happening here. My ADSL box shows no activity. Why do I have to download this? how many Mb is it? can I skip it somehow? If I cancel, it cancels the installation...
I am very disappointed and unhappy by this, I thought I would upgrade to Lion easily, especially after buying the USB key for 69 euros (I live in France).

annmamac wrote:
The only solution I found is wipe the hard drive, install Lion then install the server part. I am not really interested in a drastic solution as this one which takes time and careful backup and is stressful.
At the very least, were I upgrading like you, I'd clone what I have to an external -- either bootable or in a disk image -- in case you need to roll back.
I've never upgraded any version of Server before, but that drastic measure I take all the time with major OS upgrades. And Snow Leopard to Lion is a major OS upgrade.
It's too bad that Apple doesn't make a straight Lion Server OS "bundle" available for purchase for the price of Lion client + server add on. That way you wouldn't have to do a two-step install to get to Lion Server. It certainly exists, I've downloaded it for my Mac Mini Server, which shipped with Lion Server, when I wanted to reinstall Lion Server.

How to use Mac Mini Server as NAT with only one port??

How to use Mac Mini Server as NAT with only one ethernet port??

But why did apple sell me this server that does NAT with one port? I don't get it.

HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

Airport Utility 6.1 is incompatible with older Airport Express. Apple suggests to use Airport Utility 5.6 but it isn't compatible with Lion. How can I use Airport Utility?

I have an Airport Express 802.11b/g, model nº A1084. Mac OS X 10.7.4. When I run Airport Utility it says that the version (6.1) isn't compatible with the base station and suggests to use the version 5.6. I try to download and install it but a message says that the version of Mac OS is not compatible with this version of Airport Utility. Apple is trying to make me crazy?

Thank you Bob for the correct link. To be honest I have no idea how you found that. The Airport 6.1 utility gives the message that 5.6 is needed, and the link unhelpfully just goes to the US support home (I am UK for a start…) - and endless navigating eventually gets you to 'other Airport Utility Software' - and there is, the incorrect version for Lion…
I have managed to setup the Express using the software link you provided :-)
iteachcoffee - workaround - get someone with Lion on a laptop, or better, Pre-Lion so you don't have to download the special software (like the wonderful Snow Leopard for example) and set up your Airport with that.
The Apple answer I'm sure is simply: Get a newer Airport! ;-) (annoying I know, my old one works perfectly!)

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

What printers are compatible with the airport extreme?

What printers are compatible with the airport extreme?

Virtually any wireless printer will work just fine as well as a printer that connects using Ethernet. If you are looking at an All-in-One type of device....all functions like print, scan, copy, maintenance, etc will be supported.
If you are looking at USB devices, Apple does not provide a list of compatible models, so It is difficult to say with certainly what will work and what will not. In general, most USB printers will work.
But....very important....if you are looking at an All-in-One USB device, you need to keep in mind that only the print function will work when the device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance, etc. will not be supported.
Bottom line...if you are looking at an All-in-One device and you need all of the functions, you need to choose a device that connects using wireless only or Ethernet, not USB.

Is the Linksys WMP54G PCI adapter compatible with the Airport Extreme?

I have set up my network using the Airport Extreme and am able to connect my iMac, my Macbook Pro, and two Windows laptops without difficulty. However, the two Windows desktops that I have are using the Linksys PCI wireless adapters (WMP54G) and they both do not even see my network. They are able to see the neighbors' networks just fine, though.
I called Linksys and they assure me that the cards are compatible with the Airport Extreme. Linksys advised me to adjust my settings or call Apple for support. I have tried configuring the Airport, but I don't really know what settings to change. Has anyone else successfully connected using this adapter? If so, could you help me connect? Thank you very much!

Ok, thanks! Try the following setting on the WMP54G PCI adapter:
o Look at page 12 of the adapter's User Guide for reference ...
o For Security, select WPA Personal
o For Encryption, select AES
If this doesn't work, try reconfiguring the AEBSn for WPA Personal (not WPA2 Personal), and then make the following change on the adapter:
o For Encryption, select TKIP

Losing wireless connection with my airport express with my powerbook G4

Lately I've been losing my wireless signal from my powerbook G4 to my airport express. The light on my airport express still shows as green, so I was wondering if the trouble lied in wither the airport express or my mac? I'm running on the 6.2 version that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then turn it back on, as well as unplugging the airport express and replugging it in as well. This is starting to occur now once a day at least.
I keep my powerbook in the same room as the airport express, and it is usually in fact sitting on my desk above it...so range isn't really an issue.
This is getting tedious, and would like to know how to nip this in the bud.
Please be detailed in your responses. I'm not to tech savey. Thanks.

Lately I've been losing my wireless signal from my
powerbook G4 to my airport express. The light on my
airport express still shows as green, so I was
wondering if the trouble lied in wither the airport
express or my mac? I'm running on the 6.2 version
that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then
turn it back on, as well as unplugging the airport
express and replugging it in as well. This is
starting to occur now once a day at least.
I am also experiencing the same problem, also only since recently updating my AE firmware. I will provide a bit more information so that maybe someone will be able to offer some suggestions.
I have one AE connected to a BT Broadband modem. My iMac is down the hall, connected to the AE for internet and for Airtunes. What I experience is that I will lose connectivity to the airport itself. In fact, sometimes I can actually watch as my airport signal indicator in my menu bar jumps up and down repeatedly (although sometimes the airport signal just disappears altogether and then when I go looking for it in my Airport menubar, my network is no longer listed). The green light on my AE always stays constant when this happens (even when the airport signal goes away completely). The BT modem seems to be fine.
AE basestation firmware is V6.3.
I am connected to my AE using WPA Personal (anyone know what the Group Key Timeout option does? Mine is set at 60 minutes by default... no idea if that is connected to my issue, but I didn't want to play with it since I don't know what it does).
Channel: Automatic, Closed Network. Access Control is enabled so that only my iMac can access the network. Airtunes is enabled.
Under wireless options, multicast rate is 1, interference robustness is not enabled, and transmitter power is 100%.
Anyone have any ideas about what the problem is and what I can do to try and fix it?
Thanks.
G4 iMac 800 MHz Mac OS X (10.4.4) 1 GB RAM

Is Mac mini (G4 PPC) compatible with latest AirPort Express?

Similar Messages

Maybe you are looking for