Is making it both red or green safe as long as it's in the PSA?

Hello All,
Say for example a delta fell over for master data when trying to update to the target. I proceed to put the correct master data into the infoObject and activate. If the delta reached the PSA - would it matter wether I set the delta's technical status red or green and deleted it out of the target and the reconstructed? - basically I am trying to find out if you get data loss in one of the scenarios or no data loss in both scenarios?
Many thanks and kind regards,
Keith

Hello KeiTh,
How r u ?
Always, it is safe having the data in PSA. If a Delta failed, yes you can load it from PSA, also if some errors are there we could correct it in there.
When the data is loaded correctly what is the reason to make the request RED ??? Also, if u delete it and load again it will give a message like "The delta has been loaded already".
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button. why?

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?

Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.

Red blue & green pixels stuck on in four coners of the iPhone 3G

4-8 stuck red blue green pixels stuck on in each corner of the iPhone 3G. You can see them when you flip between icon pages & in photos, browser etc. In other words, as you slide from the springboard page one of apps to page two the pixels stay stuck on in the same place as the images drags across?
Is that maybe from pressure, maybe sitting on the iPhone?

Hi ciscomemorynet,
You might be able to fix it with a web app like: http://www.apple.com/webapps/utilities/stuckpixelfix.html
If the issue persists, the iPhone may need repair/replacement. This article: http://www.apple.com/support/iphone/service/faq/#repair8 provides service options.
-Jason

HT3728 I only show airport extreme when I open airport utility it used to show both with a green dot somehow only extreme is showing with the green dot

can not figure out why when opening airport utility the green dot with the airport express picture is gone I only see the green dot next to extreme I did not change anything I only clicked on the dot and it was gone

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Failed info package, failed request turns from red to green after 1 hour so

hi,
There is a failed info package and if u go to monitor screen, the request status will be red in colour but then the same request after 1 hour or so turn from red to green automatically, why is this, what could be the possible reason??????????

Hi Lieu.
The system automatically sets the status for the load to incorrect if the waiting time is exceeded. The load will still be running even though it might look incorrect, and that is why it turns green when it is complete (and everything is correct).
You can set the waiting time if you go to the monitor -> choose a request -> settings -> waiting time up to status incorrect (ctrl + F9).
Hope it helps (assign points if helpfull!).
BR
Stefan

My iphone 3gs dont have a red and green color can you help me how to fix it

please help me my i phone dont have red and green color how to fix it

If you have the old phone, connect it to iTunes, right click on the device, and choose transfer purchases. If you no longer have the old phone, I don't believe there is a way to recover them, as they were on your original device.

I tried to activate my new iphone 5 through itunes without a sim card, and my mac air crashed. red and green lights were both flashing but I can't get the computer to power on

I purchased a used iphone 5 on ebay which a.) had no sim card, and b.) still had a passlock code. tried to activeat the phone via itunesbut as soon as I plugged the phone into the mac, the red and green lights began flashing the the computer then shut down, and will not power back up. Any suggestions??

Return the defective phone to the seller, and hope that it didn't burn out your logic board. Make a "Genius" appointment at an Apple Store to find out whether it did.

Red/Orange/Green indicators for ios 6 maps?

I just updated to ios 6. Every morning I check my maps app to see how the traffic looks for a couple of routes I can take to work. This morning, with ios 6, there was no information. It seems it only shows when its red. This is completely frusting because I know that both these routes can have slow "orange" patches every morning. Will they be adding red/orange/green indicators to ios 6 maps?!

We are not Apple employees and you may know that already. This is a forum for users with technical questions and problems. You are entitled to your opinions and you are entitled to be disappointed. Let Apple know how you feel.
http://www.apple.com/feedback/ipad.html

Removing red and green grammar error lines in Adobe reader?

How do i remove the green and red lines in Adobe Reader?
They are spelling and grammatical errors, and they appear on printed documents?
Is it from Microsoft word that i converted it from, as i turned off grammatical and spelling errors from word options, proofing etc.
I don't want them on my printed material, so what would i go about doing?
If someone could point me in the right direction then that would be great.
Thankyou.

The PDF document was created in microsoft word, also the parts that have the green or red wavy underlines, are imported from Powerpoint.
Is there a way to remove these red and green lines without having to edit the powerpoint parts eg instead of going into power point making the changes and then bringing them into word again.
So if they could be removed from the word document alone.
Thankyou.

NO CATS "?" !!!! New Computer - Firefox 14, Windows 7 - I want my Red Cats (Green Flavor) back !!!!!!!

I want my CATS back !!!!!! My little 10.1" Netbook died just over 2 weeks ago. Got an 11.6" Acer - took it back. I managed to get my Red Cats (green flavor) installed okay at the time. Then Firefox upgraded to Firefox 14 and NO CATS !!!!!! First thing I did was get a better Computer (ASUS 64 bit with Windows 7 - prefer Windows XP) and was trying to download Firefox and NO CHOICE of Version, and NO CATS !!! Only 39,472 users and we are NOT PURRING !!!!! I am sharpening my nails on the furniture and anything else until I get my cats back or I take the Computer back and they can keep it. I will just give it all up. You take away the one thing that makes us happy. It wasn't broken and you tried to fix it - typical. Just picture just under 40,000 CATS (Users) shredding your system !!!! PLEASE BRING BACK OUR RED CATS (in both green and blue flavor) a.s.a.p. !!!! Priority PLEASE !!!!!! P.S. My guy died after over 19 years together and I am totally CAT-LESS !!!!!!!!!!!!!!!! :-((

do you mean [https://addons.mozilla.org/en-US/firefox/addon/red-cats-green-flavor https://addons.mozilla.org/en-US/firefox/addon/red-cats-green-flavor]?
There is a user review that should help you install this extension until the developer updates it:
1. Download Red Cats (Green Flavor) using IE or Chrome
2. Change the extension of the file from .jar to .zip.
3. Open the zip file & copy the install.rdf file out of it.
4. Open the install.rdf file w/ Notepad
5. Look for the line that begins "<em:maxVersion>"
6. Change the version number to 14.* (this will allow it to work w/ all versions of FF 14)
7. Close & save the file
8. Put it back in the zip file.
9. Change the extension back to .jar
10. Go into Firefox's AddOn Manager & install Red Cats (Green Flavor) from file.

In iPhone Maps, how to swap the red and green dots?

In IPhone Maps, how do I swap the default colors so that it guides me FROM a red dot (my current location) TO a green dot (destination)?
Red->Green seems much more intuitive to me than the default, which confuses me daily.
Thanks.

I wonder if this might be a case of double color management. Color management needs to be managed either by Lightroom or by the printer driver, but not both. If both are trying to do the color management you can expect results like you are seeing.

Red and green but no blue

My ATV works with my Phillips Matchpoint Flatscreen, except that everything is colored either red or green (or B/W, of course). No blues, yellows, browns etc. I'm using component cables, which I've tried in both the AV ports. When I used an HDMI cable instead, the TV didn't even recognize an input signal. Replacing the ATV, as I did today, doesn't solve the problem. Any ideas?

For the use of anyone else with this problem: 'Charlie' at Apple support told me to replace my component cables with a set of composites that I had lying around. He said they would serve the same function (at the cost of a slight loss in picture quality) as long as I used the same color combinations in the back of both TV and ATV (ie: red and red, white and blue, yellow and green). I now have the full color palette. The problem was therefore twofold: faulty component cables, and probably a faulty HDMI input on the TV.

Qosmio F30-117 - Display issues - red and green lines

Hi there,
I have a qosmio F30-117 and up to recently, I was delighted with everything about it.
Then, mid session, the graphics began to deteriorate, which a reboot fixed.
Then a few days later, it did it again and this time when I rebooted it came up with a corrupted display, lots of aa's all over the place then lines of red and green all over.
Managed to get in by selecting safe mode with networking and got a desktop although still with the red and green lines all over it.
Now its gotten worse still, when I boot up the laptop screen itself is blank, its getting something because it isnt totally black like it is when its powered off, but its blank.
As a check I connected an external monitor and managed to get in again to safe mode with networking, but its still very bad, and still has the red and green lines all over.
I started to have a look around on the good old www and there are numerous posters and articles with problems, and lots mentioning the red and green lines etc...
so Im not alone, but no-one seems to know exactly what it is.
Some have mentioned Toshiba acknowledging this as a problem and doing repairs even if out of warranty.
So, any ideas, any advice, and does anyone know if Tosh have indeed accepted the problem and offering any help??
Thanks in advance

Hi
I think it's a common problem in the Qosmio F30 models. After long term use, the soldering balls under the GPU chipset start to melt down because of the over heat and the bad soldering quality that was used with the F30 model that cannot resist high temperature. Now you have to replace the motherboard, since the GPU is build within the motherboard.
However, there is another two solution for this problem and cost less money amount:
1- do what is called a "heat reflow" for the VGA chipset: to do this you have to take the motherboard out and heat the VGA chipset on the motherboard with a heat gun or you can bake it in the oven for a few minutes at low temp, this will make the soldering balls melt and go back to there right position. However, you need to keep in mind that this solution is temporary and will last maybe for month then you have to do it again and again till you ruin the GPU and then the only solution will be to buy another motherboard. So I don't recommend that you do that at all, but if you don't want to spend a lot of money on a new motherboard this will help you to recover your data, even though there is more easier solution to do the recovery.
Anyways, you can go to youtube and search the term "VGA heat reflow " to see how people do it.
2- send your motherboard to a repairing service that can do what is called reballing: what they do is that they will replace the soldering balls under the VGA chipset with new ones that can resist high temp. and this solution is permanent and even in the future you don't have to worry that the same problem will happen again since the new soldering balls can take high temp change. I do recommend this solution even more than buying a motherboard, since the motherboard that you will get will generate the same problem after few years.
you can find this type of repair service online if you googled the term "VGA reball repair" or you can find it on ebay
If you decided to replace the motherboard I think you will not be able to find a new one, and in case you found one it will be more expensive than a new laptop, but still you can find used motherboard for your qosmio on ebay or online. so you need to do a search and find out what fits your budget or maybe it's better to buy a new laptop.
Sorry about your qosmio, and hope that my post will help you!

HP ePrint red or green status on Android

I have an HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g and have been printing quite happily to it from my Android phone using the HP ePrint app. Recently it has stopped working and I have a red dot as the status on the left instead of the usual green one. I have checked that I am running the latest version of the app and that the firmware on the printer is also at the latest version. I have the same problem from my other two Android devices (another phone and a tablet). I have tried rebooting the printer and resetting and removing and installing the app, but there is no change. I can print to the printer from my desktop and laptop without problems though.
What does the red dot indicate? I haven't managed to find any information or help on the app so that I can diagnose the problem.

@aptanet
If you are using the updated app then you are observing correct behavior.
To answer your question regarding the red and green lights. Red = busy and green = ready.
If your printer has a printer being sent to it or is being prepared for a print job from either the PC or a mobile device. The mobile device will observe the printer as "busy" thus the red light.
If the printer you are sendin your print job to is in the ready state and able to send a print job to it, then a green light will be beside the printer icon.
If it is bouncing back and forth, please make sure that other devices are not sending print jobs to the printer a the same time the app is trying to send a job to the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

Is making it both red or green safe as long as it's in the PSA?

Similar Messages

Maybe you are looking for