IS MBA DEGREE MANDATORY TO BE A SAP CRM CONSULTANT

HI,
I was bit confused is MBA degree mandatory to become a SAP CONSULTANT. Can we become a SAP CONSULTANT with B.Tech. IF we can become is there any differences between an MBA as a consultant and B.Tech graduate as a consultant.
Thanks in advance.
Regards,
SASI_S.

Hi stephen,
Your blog is so far the best, which I have read, it really is my process to expand my knowledge of SAP.
I thank you very much and I hope that we stay in contact.
Add to your blog, Item 4 (If I could afford it, I would buy access all the material on RKT SAP CRM CRM startting at 40 and building on each release at http://service.sap.com/okp), I would like Later talking to you about it, because I'll work on it.
Otherwise, I wish you nice greetings from Cologne (Germany)
I am very glad recommendations, information
and get rates from you about the topic WebUI client CRM nd 52/2007

Similar Messages

Chances for european SAP CRM consultants in the US job market?

How would you regard chances for european SAP CRM consultants in the US job market?
I have seen many job offers on the net for applicants with a work permit only.
Thomas Wagner

As far as I know, you can only get a visa if there's no resource avaliable in the whole US, looks like too much effort for a company to justify a visa, I don't know if this has changed but 1 year ago, was almost impossible.
Cheers!
Luis

SAP CRM consultant course outside in private institution

HI all,
Please tell me about institutions other than seimens so that i can able to do SAP CRM consultant course outside in private institution in BANGALORE ,and the average spending for course and wat can be the job prospects ,please provide links to the above infromation ?
thanks and regards
Prajith P

Hi Prajith,
Below is the link for all the SAP Education centers & its ahuthorized centers in Asia. You can look for the centers in India on the same page:
http://www.sap.com/asia/services/education/centres/partners.epx
For average fees check this schedule page:
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm
Job is totally dependent on your knowledge and how excel you perform in the interview.
Regards,
Subhasha

SAP CRM Consultants Needed

SAP CRM skilled contractors for a project to start in Derby.
Mandatory
Implementation experience on at least one implementation of SAP CRM version 3.1 or higher.
Configuration and Implementation of the CIC within CRM (frameworks, transaction etc.)
Configuration of activities, statues etc.
Configuration of partner determination rules.
Process modelling skills.
Business analysis skills.
Technical team leadership.
Preferable
Experience of HR processes and there implementation in shared services
Experience of call centre management and Metrics
Knowledge of version 4.0 CRM and WebCIC
Please contact me if you are interested in further information or pass on my details to anyone who might be.
Thank you in advance for any assistance you can offer.
Kind regards
Emma
Emma Lloyd
0161 942 2634
[email protected]

As far as I know, you can only get a visa if there's no resource avaliable in the whole US, looks like too much effort for a company to justify a visa, I don't know if this has changed but 1 year ago, was almost impossible.
Cheers!
Luis

Some question about SAP CRM consultant

Dear all,
      I'm a center-based consultant in china.Our company is among the first batch to run SAP CRM in china in 2006.Our version is CRM 5.0.From my two years' working experience,the status of using CRM in our company is not very good.Complex UI,sychrorize problem makes our partner not willing to use this system.
     I used to do some ABAP developing then i began to transfer to MM&SD.CRM work is the recent thing.During some months' work in CRM,i found i am more interesting in CRM.
    I want to find a new job in outside consulting company in future.I want to focus on CRM.One aspect is that i'm interested in CRM.The other is that CRM is a new product and there is not so many people doing this.However,i seems getting some worries.First,SAP CRM seems not quite mature just from my understanding in 5.0 version.We need to develope a lot not just using User-exit.I don't know whether 7.0 has changed a lot.I've seen the UI of 7.0.It seems much better.But is it means more company will choose SAP CRM 7.0 other than Siebel?In china,there seems not many CRM projects now and i don't know the status in other countries.Second,CRM may have much differences from ERP implementation because there are many process which can't be solidified.
   In one word,i'm worried about CRM consultant's future.And i hope gurus to give me the answers.THx.

Hi Feng
It would be very intersting to clients as well as consultants to work on SAP CRM. Career wise you have ample opportunities in the same. With the advent of various features in CRM 7.0 version, SAP is now more user friendly and is easy to implement with lot many processes covered as a part of vanila offer.
I wish you all the best and hope this helps.
Regds,
Raghu

Would you like to work as a Full Time SAP CRM Consultant

If You are in USA and looking for a Change or Students who did their Interns into SAP CRM and Looking for a Full Time Position.they can reach me on 908-548-0708
Regards,
Chintan

Forum Name: Rich Internet Application Development.
Description Text: General questions about Rich Internet Applications.
Forum Category: Scripting Languages.
Location of Forum: Scripting Languages.
Award Points (Y/N): Y.
Corresponding Development/Content Area: Scripting Languages.
Name and User ID of Moderators:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=eqxfqtptf%2fc%3d">alvaro Tejada Galindo</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=csxelp5hzpi%3d">abesh Bhattacharjee</a>
Name of Sponsoring Product Manager/Solution Manager: <a href="https://wiki.sdn.sap.com/wiki/display/EmTech/Scripting+Languages">Scripting Languages WIKI</a>
Reason for the Request: RIA's like Flex, AIR and OpenLazlo are getting bigger in the market. They can be linked to SAP to make richer UI's. A RIA's forum would help newbies to get in touch with those new technologies and also, would help Scripting Languages authors to share knowlegde.
My approach -;)
Greetings,
Blag.

How to mark product mandatory in SAP CRM Opprotunity and Quotation?

Hello All,
We are using SAP CRM 4.0 and have one requirement as follows:
Through Configuration ,I am not able to find the the way to mark mandatory for the fields Product , Description,Quantity,Exp.total Value under the Products Tab for the Opportunity. Also the field product under products Tab for the Quotation.
Can this be done through Config or Technically? please provide the steps for the needful and also advise do i need to put this at header or item level?
Thanks in advance.
Cheers
Sreedhar

Hi, Sreedhar
You have to write program for Badi ORDER_SAVE or use incompleteness check.
How to maintain the fields mandatory in Opportunity and quotation SAP CRM?
making activity reason as incompleteness field
Denis.

How to maintain the fields mandatory in Opportunity and quotation SAP CRM?

Hello All,
I have the following two requirements :
1.Need to mark the fields as mandatory in SAP CRM Opportunity (description,sales prospect,phase,status,opportunity group,origin
,product(description,quantity,expected total value) ,Milestones(Start date and end date),Organization.
2.Also the fields in SAP CRM Quotation ( Prodcut,Usage,Project Manager ITS (an Employee) and Capitalization ( our Z-customer field)
How to achieve this ? Is this can be done through pure customization in SAP CRM or any developers work involves? We are using SAP CRM 4.0 .
Pls provide the solution at the earliest .
Cheers
Sreedhar

Some can be done thru customazing in spro>crm>basic settings>incompleteness>Define Incompleteness Procedures. For more enhanced functionality you can use also badi under spro>crm>basic settings>incompleteness>Business Add-In for Incompleteness Check in Business Transac.
To define incompleteness for exampla for SAP CRM Opportunity - description, do the following in spro>crm>basic settings>incompleteness>Define Incompleteness Procedures:
- create new incompletenes group: e.g. ZOPP
- assign this group to your opportunity transaction type
- define incompleteness procedure:
     - object type: ORDERADM_H
     - field name: DESCRIPTION
     - relavance: HEADER
     - message: ERROR
- define determination
Regards.

How can I be a SAP HR Consultant

Hi all,
I am working as a Recruitment Consultant for a recruitment consultancy firm in Dubai. I have two years of experience in HR, I have a Bachelor Degree in Chemistry and currently pursuing MBA in HR. There is a big demand for SAP HR Consultants in the region. Please advise how can I build a career as a SAP HR Consultant. With my academic qualification and experience do I fit into the role of SAP HR Consultant?
Thanks guys.

Hi Ajmal,
You can learn SAP HR, as per my knowledge one of my friend providing the online Trainings, you can learn from as u r staying in DUBAI.
you can reach him at [email protected]
Regards
Anil.C
Reward the points if my answer helps you out.

Reading SAP CRM Order details from R/3

Hi
I have a requirement where in I need to read the data of a CRM Sales order from R/3 by referring to/ with the help of LIPS-VGBEL( reference document ).
For this I have created a RFC FM and I'm able to read the required data successfully however this is not advisable as it is creating some issues since we have huge amount of records in R/3 for which we need corresponding data from SAP CRM hence my idea is to read the corresponding bdoc's
( because the CRM data must have been pushed to R/3 via middleware using the BDOC's ? ).
Hence can anyone suggest me how to read the BDOC's/ middleware data in R/3 itself so that it is not required to use RFC.
Also, if anyone of you has any other idea then please share with me. Thank you.
Regards
Anil

HI Karthi
That means, whenever the bdoc triggers and the data comes into R/3 then we need to save them into a Z table by capturing the data in the BADI "CRM_DATAEXCHG_BADI "? am I correct ? so that we can refer to this Z table for the CRM data in R/3 while executing our interface report to PI ?
I think this might not be accepted by the client because this will unnecessarily stores the data all the time in the Z table whenever bdoc triggers and it is also not mandatory to send each and every record to PI, there might be only few records can be sent to PI and few are not.
However I'll check this with client now. Also are there any tables or so where the bdoc data( the data comes from CRM) gets stored in the R/3 system so that we can get the data from those tables instead of storing in Z table and reading from there ?
Thank you.
Regards
Anil

What is the difference in SAP CRM and SAP R/3

Hi Experts,
I am new to the CRMs system. Please clarify the following points.
what is the difference between SAP CRM system and SAP R/3?
In SAP R/3 contains the different module like SD , FI, MM, HR... Like that in SAP CRM also have different modules.?
How diffrent SAP CRM from SAP R/3?..
How to know the Basics of the CRM?
The ABAPers which are doing the coding in SAP R/3 is ok to for doing the coding in SAP CRM also. or any difference is there?
Please clarify
Regards

Hi
SAP R/3 is the core ERP package software with various modules integrated like SD,MM,PP,FICO to automate the business process in the organisations and companies and to increase the productivity by automating the manual processes and SAP CRM is New dimentional module of SAP to focus on the Customer relations and customer centric information from all angels at 360 degrees for marketing sales and service areas with different channels like internet sales interaction center and field sales (mobile sales)
Refer to the link below for CRM
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Reward points if helpful
Dinaker vikas

How to prepare to get good knowledge in SAP-CRM

Hi Experts,
I recently completed my MBA and i would like to start my career as a CRM functional consultant. Give me suggestions on how to prepare and how to get expertise in SAP CRM.
THANK YOU.....

Hi,
You can start with help:
http://help.sap.com/saphelp_crm70/helpdata/en/19/68a028d02b460fa899066d948ed3ab/frameset.htm
Denis

SAP- SD Consultant Job Opportunities

Dear Experts,
Myself Daniel. I have done BE (e & c) and also MBA ( marketing & systems). Currently, I am having 2 years experience in Sales Industry ( FMCG ). Thats one of the best FMCG Companies in the World. Now 2 years of Domain experience is not much i know, but, i believe i have have acquired a thorough knowledge in Sales. Now, i want to move on to SAP. My seniors are telling me to go for SD Module. I am thinking of admission in an authorized SAP training institute. People at the institute said that SD Module suits me best, but i want to know from you experts. Please guide me. They( the institute people) say that SD Module is the most demanding in terms of job opportunities. But having gone through different threads here its contradicting. The authorized SAP training institute guys are saying that they will also ASSIST me in getting a job but they cant GUARANTEE it. fare enough. But i want to know about the current job opportunities as a Certified SAP SD Consultant in todays market from experts.
Please help me in this, i would be grateful.
Thanks,
Dany

Hi Daniel,
All your points are valid, but unfortunately that's the state of affairs as of now. Getting an SAP Certification is equivalent to "I have learnt this SAP course from this Authorized Training Center". And that's the end of it.
Not many companies will hire you just because you have an SAP Certification. Coupled with the fact that getting an SAP Certification is quite an expensive affair (at least in India - I don't know where you are from...) the entire idea is a joke IMO.
And from the looks of it, it doesn't look like SAP is going to change this trend any time soon. Before jumping into the Certification bandwagon, do read some of the agonizing tales of freshers like you, who have done Certification and still looking for a job.
Im not trying to discourage you, but you should know the facts before making a huge investment in terms of time and money so that you can make an informed decision.
Good Luck!
pk

Clarification about SAP CRM 5.0, SAPPHONE

Hi Buddies,
Long time no see.
Curently we are considering integrating SAP with our telephony system AVAYA. According to our vendor, there are 2 approaches: SAPPHONE or ICI connectors.
It is clear that ICI connector will be based on latest version of SAP CRM 7.0 which we do not install at the moment, thus we are more probally to use the SAPPHONE connection acting as interaction center middle ware.
However, it is somehow confusing about SAPPHONE approach. It is said to be neccesary to apply CRM 5.0 as system enviroment.
As I know, CRM 5.0, not like CRM 5.1 and later web application versions, is a component inside R3 system.
Is it neccessary to install CRM 5.0 first before activating the TCI via SAPPHONE?
Is CRM a middleware between SAPPHONE and telephony system or SAPPHONE itself is a component of CRM 5.0?
Is SAP CRM a mandatory component of ECC 6.0? In fact, I do not find it in 'Component version' inside our system.
Is SAPPHONE quite out-of-date and with limited support?
Do we need install new hardware for SAPPHONE?
Sorry for asking so many questions at the same time. We really need to clarify all misunderstandings before evaluating the approaches.
Thanks a lot in advance.
Jonnie

Hi Anrei,
Thanks, I read through the help document besides trying find other documents in help.sap.com.
I guess I got it. SAPphone is a component inside CRM server as indicated by below help document:
http://help.sap.com/saphelp_crm40/helpdata/en/28/797b14a9cf4296b02742f641c18971/content.htm
The CRM Server includes the IC WinClient framework and the following SAP applications:
· SAPphone
SAPphone provides a telephony function to the interaction center. It allows data to be exchanged between the CRM Server and the telephony component.
· SAPconnect
SAPconnect provides an integrated e-mail function to the interaction center. It enables communication management software to connect to the SAP system (for example, an e-mail server or SMTP server).
Although it is a help document for CRM 4.0, I think CRM 5.0 should have the similar archtechture.
I would score you as helpful, however, I still would like to see whether I could get answers for below points:
Is SAP CRM a mandatory component of ECC 6.0? In fact, I do not find it in 'Component version' inside our system.
Is SAPPHONE quite out-of-date and with limited support?
Do we need install new hardware for SAPPHONE?
Thanks.
Jonnie

SAP CRM 6.0 Certification too expensive!

Hi!
I am a certified in SAP CRM 5.0.    I paid Rs 3,00,000 for the course, which in my opinion was really expensive.
But I was looking at the couse schedule for SAP CRM 6.0 and i was really shocked ( Yes Shocked) by the fees they are asking for the course. I think this is beyond my imagination why they are asking so much amount for the course which,
1) Doesn't gaurantee any job placement.
2) It is just for 25 days ( If you go for one of the main modules, i.e Sales, Marketing etc.)
So what does SAP want to prove by this? Come on, one can finish MBA (which is for 2 years in India and 1 year in UK) by paying this much amount.
And I have heard that many people are finding it difficult to pass the certification exams these days.
If any responsible person from SAP can explain this to me, I would be greatful. And please provide specific answers why you are charging this much.
Customer Relationship Management
TCRM10 CRM - Fundamentals      10    INR 165,000.00
TCRM20 CRM u2013 Fundamentals II   10    INR 165,000.00
CR300 CRM Sales                         5    INR   82,500.00
CR800 CRM e-Commerce               3    INR   49,500.00
CR700 CRM Service                       5    INR   82,500.00
CR600 CRM Marketing                   5    INR   82,500.00
SAP CRM 6.0 Certification                   INR   25,000.00
(12.5% service tax on top of this amount)
If you want to do the course for one module (TCRM10 + TCRM20 + CR300) taken as example.
In India it will around Rs 5,00,000
In US dollar it will be around $ 10,500
In UK pound sterling it will be around 6900 GBP.
Plesase send your comments on this.

Hello,
When you are CRM 5.0 certified again why you want to go with CRM 6.0
SAP keep on releasing the version, do you want to go anttend all the version. It is not really worth.
If you are certified in one version, in my opinion, it is more than enough.
Regards,
Ravi

IS MBA DEGREE MANDATORY TO BE A SAP CRM CONSULTANT

Similar Messages

Maybe you are looking for