Is MBox (3rd Gen) compatible with Audition CS6 on Windows 8?

I have Audition CS6 running on Windows 8 and everything seems to be working well, but I need a new interface. I was wondering if the MBox (3rd Gen) would work? I searched around everywhere and haven't been able to find an answer. I also tried to find some way to get a hold of Adobe directly to ask this question...but they really don't make it easy. So here I am. Is there anybody in the community who knows if this will work or not? Thanks!

We've been asked about this before, and the answer is... it depends. The problem is that this is made by the firm that owns ProTools, and they are notorious for not wanting their hardware to work as well as it might with other DAWs. Given a free choice, and bearing in mind that there are any number of other hardware devices on the market that are known to work fine with Audition, I'm not really sure why anybody would purchase anything from that company nowadays unless they wanted it specifically to be able to work with PT.
If you can specify what you want to be able to do with your interface, and how much you are prepared to spend on it, we can almost certainly come up with better suggestions.

Similar Messages

Help With Audition CS6: Adding windows sound to accompany USB Mic

Hey Guys,
I have a Blue Yeti USB microphone that I wil be using to create a podcast with a friend over skype. When I am setting up audition cs6 I cannot seem to get the USB mic AND skype audio to be recording at the same time. Is this because I do not have a dedicated sound card, or is there something else I am missing?
On a side note, when I set the multitrack to the stereo mix, it says that there are two different types of audio signals and wont record.
Thanks for your help!

dancalgary wrote:
I have been using Audition on this computer for the past few months now. The computer itself is an Alienware laptop, with the most optimal specifications we could get. So right away ram, disk space, disk writing speed, processor, and sound hardware should not be an issue at all.
I take it that you are using the internal sound hardware, then. If this is the case, then you could easily have problems with the sound device, because there isn't a single laptop made that has a decent sound system in it. For a start, none of them support ASIO - which is inherently what Audition uses to produce its output. What happens to get around this is that Audition has to provide an internal extra driver to drive the default sound driver, and this is at best a compromise. If you want decent sound from a laptop, then you need an external sound device with an ASIO driver.
As for W8, well I'm with Bob on this one. It's new, slightly weird, and as with all M$ operating systems, all bets are off until at least the first service pack is issued. If you have anti-virus software that's any more aggressive than AVG, then turn it off. The other common gotcha is wifi - some systems manage to give a massively high priority to wifi polling, and sometimes just turning it off completely is the only way to get any sort of performance at all. I must say though that lately this doesn't seem to have been anything like as much of an issue as it used to be back in the bad old days...
But, if you have badly stuttering playback, then it sounds as though your HD streaming isn't working as it should, and that something else is getting priority access to the drive - which is sometimes where virus scans can catch you out. You really do need to stop pretty much everything unnecessary running, one way or another. And get an external sound device that uses ASIO - this effectively bypasses most of the OS, and gives Audition pretty direct access to the device.

Bridge CC cache not compatible with bridge CS6

Starting the Photoshop CC adventure. First install was Bridge. First test was to see if the Bridge CC cache is compatible with Bridge CS6 cache. First result is NO.
Test method:
1. Set the Bridge CC cache location to the same folder I use for CS6, which contains 10+ gigs of thumbs for my library.
2. Navigated Bridge CC to a sub-folder with about 30 images, see Bridge CC re-do the thumb extractions.
3. Close Bridge CC, launch Bridge CS6, navigate to the same sub-folder, see Bridge CS6 re-do the thumb extractions.
4. Close Bridge CS6, launch Bridge CC, still pointing to the same sub-folder, see it re-do thumb extractions again.
5. Repeat steps 3&4, always with same result, a redundant re-generation of thumbs.
Conclusion:
The actual thumbnail files in the cache are the same. But something happens in the index files (data/store) to make each version think it does not have thumbnails, so it re-generates them. IOW, when Bridge CC looks at the cache last used by Bridge CS6 it says "I have not been here, must re-cache", and visa-versa.
Solution:
Must let Bridge CC have its own separate cache, so the two versions don't walk over each other. Must let Bridge CC re-cache everything, which for me (and most users I assume) will be a long and time consuming process.
Not much surprise here. The same was true for CS5 vs. CS6.

Not much surprise here. The same was true for CS5 vs. CS6.
Then it also should not be a surprise for you that this behavior already started in the Filebrowser (Bridge predecessor that came with CS1 and by far the most stable and fast cache ever in the history of Bridge) and has not changed since. Nor is it likely it will chance in the future.
Hence my advice to not use Bridge for long term DAM because you need to recache the lot every new version...

Is the Ipad 1st gen compatible with Avid Studio ? I can't find the answer on iTunes

Is the Ipad 1st gen compatible with Avid Studio ans iMovie ?

Go to the app store and read the full descriptions.
Avid appears to be, but with limited functionality. iMovie, no.

Is Lightroom 5.2 fully compatible with PS CS6?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
Is Lightroom 5.2 fully compatible with PS CS6? E.g. some ACR 8.2 stuff only works with Lightroom AFAIK. Will that mean that I can't edit them in PS? Is there a list of the exact edits I shouldn't make, if I want to be able to edit in PS?

Is Lightroom 5.2 fully compatible with PS CS6?
Yes
E.g. some ACR 8.2 stuff only works with Lightroom AFAIK.
AFAIK, this is incorrect
Will that mean that I can't edit them in PS?
You most certainly can send photos from Lightroom 5 to CS6 and do any editing that is possible in either program

Pr CC sequences not compatible with Encore CS6

Dear Adobe,
Could you please consider doing one of the following:
1. Make a CC version of Encore
or
2. Release an update that will make Pr CC sequences compatible with Encore CS6
... I really miss being able to drag Premiere Pro sequences directly into Encore.
Thanks!
-Stefan
P.S.
I really like your products!

Both 1 and 2 are NOT going to happen... CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
There is a link at the bottom of http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html to a video tutorial on using EncoreCS6 with PProCC

Is apple tv 3rd generation compatible with sony bravia kdl 55 hx 820?

is apple tv 3rd generation compatible with sony bravia kdl 55 hx 820?

As long as it has an HDMI input.

My battery is dead on my 3rd gen iPod with dock connector.....Is there a way to kick start it...before this it was fine in all depts??

Hi everyone...my battery is dead on my 3rd gen iPod with dock connector.....Is there a way to kick start it...before this it was fine in all depts??
i have done all the usual 5r's but it is totally dead.... I need to jump start the batteruy some how... can this be done??
Cheers
Stuart

Planb77..... Thank you for confirming that..... I guess the battery is shot. I do have a later version of ipod and am very happy with it, however I was trying to ressurect this one for use on my motorcycle.
How do I replace the battery.... is it easy to get the ipod apart w/o destroying it.... I would love to delve inside any way and replace the battery.
Can you or anyone help here and point me in the right direction to replace?
Thanks for the help planb77
Stuart

Why can't I download Audition CS6 for Windows Vista? I did for my PC.

Why can't I download Audition CS6 for Windows Vista? I did for my PC.

What Romit is saying is theat AA CS6 doesn't run under Vista.
Adobe Audition CS6 system requirements
Windows
Intel® Core™2 Duo or AMD Phenom® II processor
Microsoft® Windows® XP with Service Pack 3 or Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. Refer to the CS6 FAQ for more information about Windows 8 support.*

Bootcamp support drivers "the version of this file is not compatible with the version of windows you are running"

Hi,
I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running".
Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
Appreciated all and any help that can be offered.

Welcome to the Apple Support Communities
That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer

"The version of this file is not compatible with the version of Windows you're running.[...]".What can I do?

I must run a 32-bit programe on a windows 64-bit operating sistem, and i receive this message:"The version of this file is not compatible with the version of Windows you're running.[...]". I tried with Troubleshoot compatibility - didn't
work. I tried set to run in compatibility mode for Windows XP in file properties window and it didn't work. What can I do more? I
must run this programe to acces my database.

Hello qqnicol,
What program do you run?
Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
As some programs can only run in specific version of Windows, please download the right version of software.
Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Windows desktop application -- version of this file is not compatible with the version of Windows you're running

I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013. I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU". I provided the EXE to a
colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see
whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I changed the build configuration to create a "x86" build but my colleague received the same error. Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)? Thank you for your time and
response!
Sunish Abraham
"The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

Hi sunisha,
According to your description, you'd like to run the application in your colleague's computer.
I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
Check if the collegue's computer is running 64-bit windows:
Enter Control Panel, click on System and Security.
Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
You can also try compatiblity mode.
If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1)   Right click on the Program
2)   Click on Properties
3)   Click on Compatibility tab
4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
#ClickOnce deployment
http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File not compatible with the version of windows

Already downloaded the file but when I install it says that the file is not compatible with the version of windows. But my PC is windows 7, 64bit

I dowload from several different sites and all give the same message. from the adobe site too.

My version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows

I am trying to use a new copy of Camtasia Studio 3, and I keep gettiong the error message that my version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows and that I should ocntact Adobe for support. So here I am.
I am running Windows7 64bit, and it's a brand new computer so I know that there aren't tons of legacy installations or Flash players on it. This page http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html tells me that I have Flash Player version 11.4.31.110 installed but that I should have 11.4.402.287 installed. But I have installed the latest Flash player from the Adobe site (twice!) and it never gives me an option for 11.4.31.110 vs 11.4.402.287.
I am using Chrome and Flash is working fine in my browser: It's only Camtasia that isn't working well.
Thanks!

Hm, I assume you mean Camtasia Studio 8?
Check the chart on the page you linked. You'll see that the version you have installed is in fact the latest version for Chrome. They haven't updated it beyond that. Each browser engine has its own latest version of flash. IE and Mozilla are 11.4.402.287.
Aside that, there's no reason Camtasia should be requiring you to have that version of flash. Make sure when you're publishing your content that you don't check off any options to "require the user to have the latest version of Flash". You should also (if possible in your project) try to target MP4/HTML5. Check any HTML being generated with it (hopefully using SWFObject) and check for the version checking code. There is absolutely nothing Camtasia needs to require the latest version to do. I've been using Camtasia (TechSmith codec mostly) for screen recording since version 2.

Contact Adobe for support. Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows.

I reinstalled my Adobe Acrobat 6.0 Professional only to get the message "Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows" when I tried to run the program. I am using Windows 8.1 on a Dell laptop PC.
How do I fix this problem?

Buy a new version, currently at 11, 5 versions since your 6..

Is MBox (3rd Gen) compatible with Audition CS6 on Windows 8?

Similar Messages

Maybe you are looking for