Is moving all active ports to another VSAN disruptive?..
Hi! I moved all active ports to another VSAN and this caused a server to failure. I know that this can be because of the small time-out values at the operating system or bad multipathing, but how large a time-out can be in a such reconfiguration?.. What if the server can't survive any storage loss and we move server and storage array ports to another VSAN? I wonder if it can be done without any traffic interruption...
Hi Artem,
Changing server from VSAN is a disruptive process for each path you're acting on: that means if you're not having dual fabrics and proper multipathing configuration, the server will lose access to its LUN for a certain amount of time. Depending on the operating system you might expect various behaviors (kernel panic, SCSI errors, CPU in I/O wait until timeouts,...). Consider it even more restrictive when booting on SAN or when swap memory is also on a SAN LUN.
It's always good practice to work one one fabric at a time by disabling the path attached to it from the OS perspective (if multipath software is not set in a failover mode).
Changing VSAN membership for a FC port on the MDS9000 means that the initiator HBA has to log (FLOGI) into a new VSAN where the DomainID is different from previous VSAN, so its FCID will change also. It is same effect as moving fibers to another physical SAN from the host perspective.
Similar Messages
-
Moving all iTunes' music to another Mac OS X account on the same system?
Hello.
I accidently have all the songs under the wrong account in Mac OS X 10.5.5 because I copied all songs from an old iPod Nano to a new MacBook Pro's HDD and a clean iTunes with Senuti program.
How can I move them to the other account on the HDD? Even as an administrator, I cannot access the account I want to move to in Finder. I see the "access denied" folders with their red sold circle with thick white horizontal lines and borders. Accessing Music folder showed "The folder 'Music' could not be opened because you do not have sufficient access privileges."
Or do I have to log in with the correct account and reuse Senuti program to move all the songs again.
Thank you in advance.Well, it was working until I need to add new songs from CDs. iTunes says I can't write to the shared iTunes music folder/directory when adding new songs from audio CDs. Shouldn't administrator let him have no problems? I even added his account to have read and write access to /Users/Shared/iTunes Music/. I copied the music folder to his local account and had no problems.
I noticed the shared contents had something like:
iTunes Music:
total 0
drwxrwxrwx+ 163 Ant staff 5542 Nov 3 07:45 .
drwxrwxrwt 7 root wheel 238 Nov 30 17:49 ..
drwxr-xr-x 3 Ant staff 102 Oct 12 07:36 Foo Bar 1
drwxrwxrwx 3 Ant staff 102 Oct 12 07:35 Foo Bar 2
Is it because of Ant and Staff names instead of root and wheel? I
didn't see anything about this in Finder's Get Info. I also didn't see
a way to do recursive too like in Windows. What am I missing?
Thank you in advance. -
I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2 -
Hellow everyone,
I have just moved from one PC to another. They are windows pc's not macintosh. When i installed itunes on the new computer it stated that I already had 5 devices authrorized for this account. I did a little reading and went in and deathorized all 5 PC from the account as I am sure it was a couple pcs ago and a few iphones. When I try and go in and authorize an account I cant see anywhere where there is a prompt to authorize the new PC. I go into store and all it says is that there are no devices associated to this account. What I would like to do is associate my new PC and my iphone to this account and hopefully restore from the cloud all of my music and programs.
Any idea what I am doing wrong here or how I can resolve this. Thanks in advance.
Respectully.
CKif it's music then drm is not used there any more and drm can be removed from previously bought drm material without cost
-
I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkrSo am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck! -
After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another catalogue."
OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount..... -
How to list all active local ports where a server/services is listening?
How can I list all local ports where a local server or services is listening?
The listing should contain the path and program name of the listening server/service.
So I need something like:
port=22 /lib/svc/method/sshd
port=25 /bin/emailprgm
port=1049 /ust/local/bin/myserver
How can I do this?lsof (compile, sunfreeware.com, blaswave)
it wont show full path i think (man lsof for more) however it gives pids/ports/exe name, so you could take that and script it or do something with the output. -
Another iAS6 SP4 ? - sticky bits on, 5 kjs's, yet all activity routes thru 1 kjs
Although StickyLB set, check marks did not show thru admin tool. Once app server was bounced, all activity was balanced (viewed via OS threads) and StickyLB showed checked thru one instance of admin tool. Other such happenings elsewhere?
Tom:
What kind of application are you using, Servlet or JSP or else?
Alex -
When trying to recover a lost iTunes library file, the programme moved all the normal contents of iTunes folder to the desktop. Now what must I do? There is no iTunes Library.itl file. On the desktop it is labelled iTunes Library.xml. Several others files have appeared there too including iTunes Music Library.xml
Before I can use the programme is it necessary to take another step?
Thanks for advice.Don't worry. I'm all for caution. I guess I should have asked a little more about what steps you took while trying to recover your lost library?
The permissions thing may be a red herring, but if there is a problem with file access rights to the designated media folder iTunes has been known to place files on the desktop instead since it can access this location. The most common cause for such problems is working with a folder on an NTFS drive via a differnt account or on a different computer. In the normal course of events folders created inside user profiles have limited rights for other users.
Here are the typical layouts for the iTunes folders:
Normally the iTunes folder will be created at <User's Music>\iTunes with the media folder inside it. The library files should all appear in the same place so your comment about there not being an iTunes Library.itl file is confusing. Is it just the case that the .itl extension is hidden? The two .xml files makes sense from the above and indicates that the active library is not in <User's Music>\iTunes, but you have a recovered file from when it was.
If, in fact, the situation is that your desktop is acting as the main iTunes folder, and contains the library file, Album Artwork, iTunes Media and (optionally) Previous iTunes Libraries folders, with all other content being inside the iTunes Media folder, then it should be relativly easy to rearrange your into the correct shape and move them to the correct location.
If things are more complex, with something other than a library folder containing a media folder, then reestablishing the normal order is more complicated. The iTunes consolidate function is used to bring copies of files stored outside of the media folder into the media folder. It may sometimes be needed as part of the process of tidying up, however it leaves behind originals. There are circumstances where there isn't room for two complete sets of the media files on the same drive which is why I suggested the script might be useful as it produces the same results for the library without leaving the originals for manual clear up.
I think before you do anything however, we should get a clearer picture of exactly what is where. Could you perhaps take a screenshot of the desktop and post it here? Take a look at this post on making a split library portable. The same techniques I outline there can be used to lick your library into shape, it is just a question of working out which to use in which order for the best effect.
tt2 -
I have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
Itunes duplication of songs when moved from one computer to another.
I moved all my music and itunes from one computer to another. I now have most of my artist that have duplicate songs and sometimes three copies of the same song for some reason. Some artist it didn't affect at all but that is a minority. How can I clean this up without going through every line in my folder and deleting the copies? I have like 25K songs. I hope someone can help.
ThanksHave a look at Teridon's iTunes Scripts. There's a script in there for dealing with duplicates that might be of some help to you: Teridon's iTunes for Windows Scripts
-
I recently purchased a Windows 8 laptop and istalled Office 2013. I then installed iTunes. After moving all my music to my new PC I got iTunes to import it, and then synced it to my iPod (3rd gen.) However, I cannot get iTunes to sync my Outlook Calendar or Contacts with my iPod. When I try it crashes Outlook. iTunes continues to try to sync, but when it finishes my Calendar and Contents are empty (ERASED!). I have de-installed and re-installed iTunes (according to Apple's instructions), repaired Office 2013 and Outlook, scanned for viruses (etc), cleaned out temp folders, defragmented, etc., etc., etc. Has anyone seen this before, and does anyone know houw to fix it? (HELP!)
Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk
-
Hi all,
I moved all my music from my laptop to a portable hard drive, my hope was that i could just plug and play into my mabook air not the case...
I was wondering if anyone could help with the following, in a perfect world i would love to be able to keep the music on my drive (there is about 500 gb worth) and then when i want to play through mac to apple tv be able to just plug into mac and then be good to go, or if poss for itunes to be able to recognise the music on my portable drive...and for me then to play through itunes without adding it (as there wouldnt be enough space)...and to also have the capability to plug the drive into my windows comp and be able to also still play from there.
I dont know if any of this is poss...it all seems really complicated to me...and i am new to mac.
If anyone thinks they could help please get in touch!
my main goal is to be able to play my music through apple tv to the surround system in the house, and to be able to play music through my mac if poss, doesnt have to be itunes so long as i can air play or even better select through apple tv.
thanks so much in advance to anyone who can help me out
p.s. i tried this...didnt work, unless i am doing it wrong
http://support.apple.com/kb/ht1449iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168
Windows users see tip at: https://discussions.apple.com/message/18879381
If you put it in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
Do not confuse (as you did) moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449 -
802.1X Authentication issues when moving between switch ports
Hi Guys,
We are having some issues at our office where when users move from one switch to another, the 802.1X authentication does not want to take place. The PC just gets an APIPA address. Now I have read about features that MAC Move and MAC replace but they seem to be used when moving from one port a switch to another port on that same switch. Will MAC move help for issues between switches? And should I focus my attention on the switch's configuration or have a look at the NPS server that might be blocking that authentication as the user is already authenticated?
My configuration we have on the switch ports look as follows:
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
dot1x pae authenticator
Your help is greatly appreciated.
GrantHi Neno,
Thanks for the reply. We are using NPS on a Server 2008 R2 virtual machine. The switches are stacked 2960S-48FPS-L running 15.0(2)SE. I will quickly do the debugs and get back to you.
Here is the config:
aaa group server radius customer-nps
server name radius1
server name radius2
aaa authentication dot1x default group radius
dot1x system-auth-control
radius server radius1
address ipv4 172.28.130.52 auth-port 1645 acct-port 1646
key 7 05392415365959251C283630083D2F0B3B2E22253A
radius server radius2
address ipv4 172.28.131.52 auth-port 1645 acct-port 1646
key 7 107C2B031202052709290B092719181432190D000C
interface GigabitEthernet1/0/1
switchport access vlan 300
switchport mode access
switchport voice vlan 2
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication periodic
authentication timer reauthenticate 28800
authentication timer inactivity 1800
mab
no snmp trap link-status
mls qos trust cos
dot1x pae authenticator
auto qos trust cos
storm-control broadcast level 1.00
storm-control multicast level 1.00
spanning-tree portfast
spanning-tree bpdufilter enable -
I would like to add a bunch of ports to a VSAN using the CLI. The ports are all online and when they are online I must a respond to the command with a y to indicate I really want to do it. How can I add a bunch of ports to a VSAN when they are online without having to do the commands one at a time and with no reply prompts?
I would like to just paste this and have the ports assigned
vsan database ; vsan 100 interface fc4/5
vsan database ; vsan 100 interface fc3/12
vsan database ; vsan 100 interface fc5/17
vsan database ; vsan 100 interface fc6/17vsan database
vsan 100 interface fc4/5,fc3/12,fc5/17,fc6/17 force
Use the force option to bypass theconfirmation
Maybe you are looking for
-
Need a little help with this code
Hi, right now I'm going through the xmlmenu tutorial, which I've found at kirupa.com. It's pretty much clear to me. Then I decided to try to import a blur filter. And as soon as I wright the import flash.filter line, I get a syntax error. Where is th
-
I have created a small application to upload any file and save it in a temporary directory. Then display all the file names which are in that directory.here's my code .... MultipartRequest mr = null; try { mr = new
-
Hi all, is it possible for a Supplier to upload file during the self registration phase and / or during the questionnaires compilation? Thanks! Nuz
-
Background Job Terminating with Signal 4 received by operating system
Hi , There is a zee ABAP program which is working fine in foreground but the same was not working at BACKGROUND when I shedule the job with the same zee ABAP program. the job is terminating with "Job also cancelled due to process termination. See th
-
How to make scrollbar larger?
Hi! Is there a way to enlarge the scrollbar? Thanks!