Is mp3 support going ot be added to Flash Media Encoder?

Hi everyone,
I work at CNET in the Entertainment division and we recently
launched a full on Flash video player
Example:
http://www.gamespot.com/video/918428/6172011/fallout-3-official-trailer-1
On the side for the past few months we have been testing
On2's Live Flash encoder and Adobe's Flash Media Encoder with
Akamai. Because of features lacking (like de-interlace) in On2's
encode, we have no choice but to use Adobe's encoder.
While there are something I wish would be added like full on
multi-thread support (considering On2VP6 is so CPU intensive),
though that's more of an On2 thing (maybe Adobe can pressure them
since Dual-Core/Quad-Core systems are the norm these days and the
On2VP6 does little to utilize it), one thing that has really urked
us is the choice for the Nellymoser codec to be the only option for
audio in the Flash Media Encoder (and On 2's).
We want to migrate from webcasting in Windows Media to Flash,
but our audience feedback has been horrible with the Flash live
streaming because of the terrible audio codec we are forced to use.
Which leads me to my question --- is there going to be any
updates in the near future to allow us to use mp3 as the audio
codec? We have several machines on order just to handle Flash Live
streaming using Adobe's software and going by user feedback, we
simply cannot do it...so we are gonna have to be forced to have
Windows Media player within our Flash which is going to kill the
user experience.
Anyhow, just hoping to hear a good answer. Have the same
question into On2's support....
Dave

I recently read on one of the listservs (not sure which one
it was... maybe the flashcomguru.com list?) that the next version
of FME will use hardware acceleration, so that should alleviate
some of the processor load. Of course, this is third party info I'm
passing along, so take it with a grain of salt.
About MP3, I'm not so sure I'd hold my breath on that one.
Problem is, FME is a free product, so I don't know if Adobe will
see value in shelling out the cash for the licensing required to
support mp3 encoding (money that will never be directly recovered).
They already have the licensing for ASAO, and as I understand
things, that ASAO license is the reason you can only use FME if you
own FMS or have an active account with one of their partner CDN's
Incidentally, this is a user-end forum, and I don't see a
strong presence from the Adobe employees around here (some, but not
a whole lot). If you were using FMS (rather than a CDN) I'd suggest
contacting Adobe support directly, but I've heard that support
requests from non-purchasers tend to fall to the bottom of the pile
indefinitely.

Similar Messages

AE not adding files to Media Encoder

Hello,
My After Effects CC is not adding files to the Media Encoder. I can render using the add to render queue option, but when I try to Add to Media Encoder, it will open Media Encoder but it doesn't add the file the the queue list.
I've updated AE and Media encoder and that didn't fix it. Running on Mac Yosemite 10.10.2 Does anyone have any suggestion?
Thanks for your help

See the known issue here about Adobe Media Encoder taking a very long time to open the first time on Mac OSX v10.10 (Yosemite):
After Effects with Mac OSX v10.10 (Yosemite)
Based on this, my suggestion is to open Adobe Media Encoder once, give it plenty of time to start because of this Mac OS bug, and then try again. My guess is that it'll work fine after that.

FME & mp3 Support

Hello,
I am looking for a version of Flash Media Encoder that will
allow me to utilize the mp3 audio aspect instead of NellyMoser.
Where can I get my hands on a version that does this. I will
willing to drop $100 into the paypal account of whomever leads me
in the right direction to get this working. We need this ASAP as we
have begun broadcasting live using FME, but are not able to play
any music due to what nellymoser does to the audio.
Thanks

I have searched all over google and been to the end of the
internet and back again and have still not been able to find a beta
version hat supports mp3. My processor can handle it as it is a
quad core with 4gigs of ram. Can you point me in the right
direction of finding this version with mp3 support?
Thanks

Adobe Media Encoder CS4 Suddenly Adding Black Bars To L & R

I think I may be going crazy.
Every video I have ever shot has been cropped to 720x340 in After Effects then exported as an uncompressed Quicktime movie file at 720x340. For the last year I have done this process exactly the same everytime.
On my website (www.stevenbogda.com) videos are either 360x170 or 480x226 FLV files, both variations of the original 720x340 Quicktime file. I would just bring a 720x340 file into Adobe Media Encoder CS4, adjust the dimensions and bitrate and export and it would work perfectly. Now all of the sudden, when I bring anything I shot and exported recently into AME CS4 to get it ready to go on my website, it adds BLACK BARS to the left and right side of my video (refer to image 2).
I thought it was just a visual problem in AME CS4 until I exported it as the FLV file that I planned on doing, just to find that the actual FLV file is in fact the dimensions I wanted, EXCEPT it has black bars on the right and the left...
I immediately blamed it on After Effects and started re exporting uncompressed Quicktime files with different settings and managed to get AME to work properly but it was random. Some videos were exported with "settings 1" and worked in AME but other videos with the same settings didn't work.
I went to my hard drive where I store my master Quicktime files that were used to make the videos on my site and brought some into AME CS4 and they acted the same way that the new videos I made do, with black bars on the left and right. These videos worked the way I wanted them to in AME CS4 last month, but now suddenly are doing what my more recent files do and I have no idea why.
I found out that by lowering the width of the video (refer to image 3) the black bars would dissapear slowly, but then the video would be a smaller width that it should be. I really think I am just missing something, or set some setting wrong by accident because this never used to happen and now is happening with files that once worked correctly.
Any help or ideas would be greatly appreciated because I am spending way too much time re exporting uncompressed files just to find out they don't work.
Thank you,
Steven

Stan,
I was using the on2VP6 codec at data rates from 275k to 400k with good results. -- with the new CS$ endcoder i am used h.264 at 500k to 700k, video quality looks good but the graphic overlays look like alised crap. In the encoder settings the edges of the graphics get jaged when I make the field order progresive...
I am starting with DV NTSC video at 720x480.
I am going to go back to my old work flow and test it. The settings are a bit different from premiere pro 1.5 to CS4 -- in 1.5 i could export out an unconpressed .mov with square px and then bring that large file to flash media encoder to create the .flv

Playing mp3 over RTMP (Flash Media Server)

I've got some mp3 files that are served from a Flash Media Server. I want to write a Flex application to play them. Do I need to use NetConnection/NetStream or can I do it with just the Sound class? I've got a sample app that can connect to the stream with NetConnection/NetStream but I don't know how to connect the netstream data to something that will actually play the sound.
Will I be able to read the id3 data of the files with this?

I actually got it working , let me know if that helps
Create NetStream and attach it to Video Control, then play();
@return void
private function connectStream():void {
   // Assign a new Netstream Connection
if(_nsStream == null){
nsStream = new NetStream(ncConnection);
nsStream.addEventListener(NetStatusEvent.NETSTATUS, netStatusHandler);
nsStream.addEventListener( AsyncErrorEvent.ASYNCERROR,
handleCatchAllErrors );
nsStream.addEventListener( IOErrorEvent.IOERROR, handleCatchAllErrors );
_nsStream.client = {onMetaData:handleMetaData, close:handleCloseStream};
_nsStream.bufferTime = _videoData.buffer;
   // Assign a new ID3 Netstream Connection
if( id3ns == null && _videoData.mediaType=="mp3") {
id3ns = new NetStream(_ncConnection);
id3ns.addEventListener( AsyncErrorEvent.ASYNC_ERROR,
handleCatchAllErrors );
id3ns.addEventListener( IOErrorEvent.IO_ERROR, handleCatchAllErrors );
id3ns.addEventListener( NetStatusEvent.NET_STATUS, netStatusHandler );
    //HACK: we are required to pass in static duration via XML till we get
server-side actionscript working
metadata.duration=videoData.duration;
    id3ns.play(_id3_path);
id3ns.client = {onId3:handleOnId3};
    _id3Field = new TextField();
_id3Field.width = _video.width;
_id3Field.wordWrap = true;
_id3Field.multiline = true;
_id3Field.antiAliasType = flash.text.AntiAliasType.ADVANCED;
//_id3Field.defaultTextFormat = _ccTextFormat;
_id3Field.selectable = false;
this.addChild(_id3Field);
   _video.smoothing = _playerData.smoothing;
video.attachNetStream(nsStream);
    nsStream.play(videoData.file);
_isPlaying = true;
createSoundObject();
   this.addEventListener(Event.ENTER_FRAME, onEnterFrame);
trace("[MEDIA FILE] "+_videoData.file);
Get MP3 data from ID3 tag
@return void
private function handleOnId3( obj:Object ):void{
if(obj["artist"] != undefined){
_id3Field.text = "by: "obj["artist"].toString() + "\n";
if(obj["songtitle"] != undefined){
_id3Field.text = "title: "obj["songtitle"].toString();
//if we wan to inject media with other data, add it here
for( var b:String in obj ) {
//_id3Field.text += b + ": " + obj[ b ];
//trace(b + ": " + obj[ b ]);

Is Flash Media Live Encoder Support Windows Mobile Phone?

Flash Media Encoder Support Windows Mobile Phone?

I had the same problem and didn't notice that I was streaming at a higher bit rate than what the channel allows. The chanel of the service I was using allows 500Kb and I was streaming at 548Kb...
Lowered it to under 500Kb and it started working...
That could be one of the reasons...

Flash Media Live Encoder alpha channel (chroma keying) support

Hi,
When trying to encode live strem with alpha channel (32 bit) using the latest Flash Media Live Encoder (FMLE) I have got no alpha chammel coming out from the encoder heading the FMS.
Is the new FMLE supports alpha channel encoding?
Thx.

Hi,
Right now FMLE does not support Alpha channel. Its Video encoeder encodes data from YV12 format.
Even latest release of FMLE is not supporting alpha channel. If you want this to be implemented then you can add this as Enhancement bug in Adobe site for Flash media encoder product.

Flash Media Live Encoder Support

Might LCCS's future roadmap include possible support for using Flash Media Live Encoder (FMLE) for higher quality video/audio capture and encoding? Or will LCCS continue to be limited solely to encoding by Flash Player (VP6)
Thanks,
g

Hi,
Right now FMLE does not support Alpha channel. Its Video encoeder encodes data from YV12 format.
Even latest release of FMLE is not supporting alpha channel. If you want this to be implemented then you can add this as Enhancement bug in Adobe site for Flash media encoder product.

Can you customize what folder MAIL goes to when adding attachments?

Can you customize what folder MAIL goes to when adding attachments?
My friend has 2 email addresses for businesses.
He has invoices in folders for both, and wants to set up the Mac like this:
When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
Make sense?
Can this be done?
Thanks in advance....

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

CS4 license marooned on my dead / inaccessible computer. Online Support goes in circles. Can't elevate to human by phone, or by chat. Chat link grayed-out for me. Now what?

Hello:
I attempted to follow instructions given by a previous answer that addresses the same problem I have, but without success: Deactivation, cant reach computer it was activated on and Adobe "support" goes in circles and ends up in forum where Adobe cannot deactivate for me
Following Contact Customer Care did not lead me to chat option that I could spot. I'm sorry if I missed a link that is obvious to everyone but me. Maybe I just need that link pointed out to me more vigorously.
By the way, this link, What are my contact options? has a chat option, but it is grayed out (at least for me) so that's a dead end.
So, please explain to me (like I'm a bewildered child) how to get to chat support. I am unable to fill in logical gaps by myself. :-/
Thank you SO much. :-)
That's it for my question. The rest is just a boring account of how I struggled to get here. Which I include just in case an Adobe Staff Member would find my customer-experience worth noting.
I reached Shivangi Moitra (Adobe) [email protected] by sending feedback about the dead-end support loop that I encountered by following the steps here, at www.adobe.com/getsupport. Incidentally, I gave her a detailed description of my deactivation problem too. Shivangi responded by directing me to use the same link that goes in circles! To wit: "The first step for contacting us will be to start online [at www.adobe.com/getsupport]." Of course you notice that this is yet another dead-end circle in the customer support system.
If my email to Shivangi is a useful reference then here you go!
I am unable to get online or phone support from Adobe. I need to deactivate CS4 from a dead computer. Adobe online help is defective because it puts the user into an endless loop making it impossible for me to find a solution, and impossible to get support. Please remedy the defect and please call or email me to manually update Adobe's activation database. (Phone and email address redacted.)
I own a copy of CS4 that is marooned on dead computer. Consequently, I can not deactivate that copy. I know that a single license for Adobe CS4 only lets me install the application on two computers, of which I can only use the application on one computer at a time.
I need Adobe to manually deactivate my earliest CS4 installation from its servers so that I can activate CS4 again when my new computer dies so that my work flow is not interrupted by the unavoidable (meaning eventual) breakdown of my next computer.
1.) http://www.adobe.com/
2.) login to Adobe
3.) Don't search keyword "support" - worthless, instead go to . . .
4) adobe.com/getsupport which resolves to
5.) http://helpx.adobe.com/contact.html
6.) Pick 'Adobe Creative Suite'
7.) http://helpx.adobe.com/contact.html?step=STEA
8.) Pick 'Downloading-installing-setting-up'
9.) http://helpx.adobe.com/contact.html?step=STEA_downloading-installing-setting-up
10.) Pick 'Licensing-activation'
11.) http://helpx.adobe.com/contact.html?step=STEA_downloading-installing-setting-up_licensing- activation
12.) Pick 'Error: Sign in failed, activation limit, or maximum activation exceeded'
13.) http://helpx.adobe.com/x-productkb/policy-pricing/error-activation-limit-reached-starting. html
14.) Scroll to Error: 'Problems signing out or deactivating?'
15.) Click on link: Can't access your previous computer?
16.) OPENS THIS MESSAGE: Don't have access to the previous computer on which you installed the application? ***CONTACT US***. Be sure to have any purchase-related information ready.
17.) Click on the 'Contact us' link . . . infuriatingly returns you to the start of the loop
18.) http://helpx.adobe.com/contact.html SAME AS STEP 5
I have explored all the other branching available at helpsx.adobe.com . No other branching resolves the problem or gets me support. I explored branching specific to CS4, and branching not specific to CS4, and branching of any kind in search of a solution or support. There is no solution or support available online from Adobe for this problem.
I also called 1.800.642.3623 per https://forums.adobe.com/thread/1030438 which was of no use.
This page was of no use. http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
This 'Let us know how we're doing' form is my last hope.

I have same issue: CS 5 on a dead computer. I was able to chat just now with Adobe. I still need to try this to see if I can do as she says.
Chat
Your case number: #######
Here's what we know about your issue so far. It relates to:
Other product or service change
Downloading, installing, setting up change
Licensing and activation change
Thank you for contacting Adobe.
A representative will be with you shortly.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
You are now chatting with Rachana.
Rachana: Hello! Welcome to Adobe Customer Service.
Rachana: Hi Linda.
Linda : Hello Rachana
Rachana: How may I assist you today?
Linda In 2012 I purchased Adobe Creative Suite 5 to use in my retirement. I installed it only on my home computer as I had different software at work. Now my home computer has died. I cannot get it to start up. I have a new computer and want to install it on that computer. Can you please deactivate the dead software on my old computer so that I can install AND ACTIVATE it on the new one?
Rachana: I will check and help you with this.
Rachana: May I have the serial number for the product?
Linda : mastercollection # provided acrobat # provided
Rachana: Thank you.
Linda : there are also individual serial numbers for 4 other unidentified products on the back of the package discs came in. do you need those also?
Rachana: I have made the necessity changes to the software, you can go ahead and activate without any issues.
Linda: thank you Rachana

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Mp3 support in Java

I want to write a decent multi-media player in Java so I can run it on both Linux and Windows. As of yet however, I have not come across any support in Java for the mp3 format. It supports .au and .wav files, but I have yet to see mp3 support. Does anyone have any experience of working with mp3's in Java? I'd appreciate greatly any help.

Hi,
type "JMF" in the search field and search for it - its the Java Media Framework, a kind of add-on you can use for that.A Media player is provided too by JMF as example application. Have fun ...
greetings Marsian

Is the .sh install facility going to be added to Solaris 11 since the IPS i

Is the .sh install facility going to be added to Solaris 11 since the IPS is not ready?

I don't know what ".sh install facility" means.
I don't what you mean when you say "IPS is not ready".
Can you explain in more detail?
As far as I know IPS will definitely be the packaging system for Solaris 11.
------------- Edit ----------------
Ooops, I thought you were talking about Solaris 11, but you are probably talking
about the Studio installer. Adding a .sh-based installer on Solaris 11 is technically
possible. I'm not really in a position to say for sure if it will be done or not.
We are actively working on making SS12.2 available in IPS, but it's not there yet.
--chris
Edited by: Chris Quenelle on May 23, 2011 9:51 AM

MP3 Support in Solaris

Hi
I'm starting a new project that requires MP3 support. What is the support of MP3 using JMX in Windows and Solaris with the Enhancement Pack. Can I decode it? Can I encode it?

I'm starting a new project that requires MP3 support.
What is the support of MP3 using JMX in Windows and
Solaris with the Enhancement Pack. Can I decode it?
Can I encode it?I am not entirely sure, but I have been working on some
webstart examples of launching the Performance Pack
versions of JM Studio(1) & JMF Registry(2).
(1) http://www.javasaver.com/testjs/jmf/#test3
(2) http://www.javasaver.com/testjs/jmf/#test4
I expect (OK hope) the second can tell you what
it supports for Solaris - particularly for the mime-types,
e.g. for the Windows PP, it looks like this..
http://www.javasaver.com/testjs/jmf/#mime

H264 and mp3 support in VLC needed ? streaming.ffmpeg

I have found that I need to VLC (video-lan-client) with mp3 support so I used the cvs version of ffmpeg in the AUR packages but this doesn't seem to support H264 video.
How do I add H264 support to the PKGBUILD so I can have both. ?
Any help greatly appreciated I can stream H264 with current version of ffmpeg but no audio
Then with the ffmpeg-cvs no audio or video.
This is the same if I am streaming or playing locally.
Cliff

You'll need to install GPAC in order to build ffmpeg with H264 support. I don't believe it compiles properly without it. I couldn't find gpac in any of the repositories or AUR so your best best would be to write a pkgbuild yourself or make a request for someone in the AUR request forum to do it for you.

Is mp3 support going ot be added to Flash Media Encoder?

Similar Messages

Maybe you are looking for