Is multimapping is possible using abap map

Hi,
My scenario is to deal with 1:n message splitting.Is it possible using abap mapping instead Graphical mapping?
Appreciate for your response.
Regards,
Daniel.LA

Prateek,
Could you please tell why it's not possible thru ABAP Mapping? I think it's possible thru ABAP mapping, plz correct me if i'm wrong. I agree that Multimapping is possible only for adapter that lies in J2EE Engine! Plz clarify.
raj.

Similar Messages

Using ABAP Mapping

Hi,
today I read that it should be possible to use ABAP Mapping instad of Messagemapping.
in depth SAP Docu told me following: Add additional mapping types in your Exchange Profile:
com.sap.aii.repository.mapping.additionaltypes
R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
But were to find my Exchange Profile?
Regards Matt

go to http://<host>:5<sys_num>00/rep
Click on Administration and login with XISUPER.
Make sure you are in Repository tab in the left side of the window.
Click on All properties under Administration of Properties and check whether your property is there, otherwise use refresh. If nothing happens, refresh your cache and check the properties again.
There was an how to guide on this, I could not find the link, but have it in my collection. If you want I can mail it.
regards
SKM

Variable Substitution not working when using ABAP mapping

Hi all,
I am doing an IDoc to File scenario.
Due to some complex mapping requirements, i had to use ABAP mapping for IDoc to File ( IDoc : SHPMNT05)
There is also one more requirement where in i need to generate the receiver filename dynamically
i.e the filename is of the form :
GW-XYZ-DD/MM/YYYY.csv
Where
XYZ is the Shipment number (E1EDT20- TKNUM)
DD/MM/YYYY is the IDOC creation date in ECC (EDIDC-CREDAT)
so i used the variable substitution option in receiver file adapter.
But its not working.
Is there any limitation for using the variable Substitution, doesnt variable substitution work in case of ABAP mapping?
Regards,
Loveena.

Hi,
u written ABAP mapping program to get the file name in the required format ,
is it rt?
when u test it at message mapping(including ABAP map program)
u get the the required format of file name in the one of target filed.
if that was fine, please check the variable substituiton parameters at receiver file adapter.
i mean, are u maintain variable name and refernece.
u have to specify the payload information.
warm regards
mahesh.

How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

Hi,
I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
Can anybody please point me the location, to look for, or post the document.
Thanks,
Namadev

Hi Namadev Chillal ,
These r the links containing PDF docs which u r looking for:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

Can somebody post link to How to Use ABAP-Mapping in XI 3.0?

Hello,
can somebody post a real link to the document How to Use ABAP-Mapping in XI 3.0. All the links to this documnet in the existing posts are not valid.
Thanks for your information
Jayson

Hi
Following weblog might help you.
Testing ABAP Mapping - Testing ABAP Mapping
XML DOM Processing in ABAP part I - Convert an ABAP table into XML file using SAP DOM Approach.
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
SDN TV demo to create and test ABAP mapiing - https://media.sdn.sap.com/SDNTV/main.asp?mediaId=128
How to guide for ABAP mapping.
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
Also check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
Testing ABAP Mapping
Using ABAP XSLT Extensions for XI Mapping
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 9, 2008 6:27 AM

How to write a log using abap mapping

Hi all.
in PI 7.1 environment I need to use abap mapping and I wish to write some XML data into a table that I created for logging the data.
I know that using the abap mapping I can parse an XML file. My question is how to write this table defining a specific method, if it is necessary.
Any help or suggestion is well appreciated.
Many thanks in advance for your kind cooperation.
Regards,
Giovanni

hi,
>> My question is how to write this table defining a specific method, if it is necessary.
just like to normal table (insert statement)
parse XML and get the data you need and just insert into the DB table
there are many tutorials showing how to parse xml file inside abap mapping
so just do a little search on sdn
Regards,
Michal Krawczyk

IDOC--XI--IDOC Using ABAP MAPPING

Hi all,
My requirement is to map source IDOC fields to target IDOC fields using ABAP Mapping.
few fields in source idoc structure has to be merged into a single field in target idoc structure.
need help on how to start with as i am not exposed to ABAP Mapping.
regards,
Subba

Hi Subba,
I suggest you also go through these links:
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Re: Performance of mappings (JAVA, XSLT, ABAP)
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Regards,
Abhy
Message was edited by: Abhy Thomas

Error when using ABAP mapping

I followied the how to guids "How To convert an IDoc-XML structure to a flat file and vice versa in XI 3.0" and "How to Use ABAP-Mapping in XI 3.0".
After I built created the ABAP-OO class Z_ABAP_MAPPING_IDOC_TO_FLAT and implemented every thing, during the testing, I got the error "Exception CX_SY_NO_HANDLER triggered, An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handl".
Please help.
Thanks!

Please debug as follows...
put a break point inside your class/method....
goto tcode SXI_MAPPING_TEST....give in the configuation details of your scenario...and when you execute, give the IDOC-XML, copy it from SXMB_MONI where you are getting the error....
when you execute, it shoudl stop at the break point that you had set in your class....continue debugging using 'F6' function key, and check where you are hitting this error...
The chances are that the FM that converts IDOC-XML to flat file format might not have been executed correctly...
Thanks.

Idoc - JMS queue using ABAP Mapping

Hi all,
I am doing a idoc to JMS queue scenario using ABAP Mapping. I am new to ABAP
Basically i want to know how to read the OUTBOUND idoc segments and their field values. I have gone through link : IDOC--XI--IDOC Using ABAP MAPPING(Idoc to Idoc using ABAP Mapping).
If any body could suggest me how to read idoc->segment->fields or give some sample code, it would be very helpful.
Thanks in advance&
Regards,
Mani

Hi Mani,
Maybe it would be easier to use graphical mapping. In ABP mapping you have to parse XML and than create target document. If you want to do it I'd strongly advice you to read it:
http://help.sap.com/saphelp_nw04/helpdata/en/47/b5413acdb62f70e10000000a114084/frameset.htm
Regards,
Wojtek

Receiver determintation using Abap Mapping

Hi,
I configured a scenario in which I'm using extended receiver determination to determine the receiver of an incoming message. (The reason for this is that there is only one XI system and two ECC systems - DEV and QAS. By means of the setting in a customizing table it can be determined whether the message is sent to DEV or QAS. The message can't be sent to both systems because it is a synchronous interface). The receiver determination calls an Interface Mapping which has target interface Receiver Determination. I made an Abap Mapping program in which the customize table is read and the output message is formed as follows (according to the structure of the Receivers message):
      lrf_output_document = lrf_ixml_factory->create_document( ).
      lrf_receivers = lrf_output_document->create_simple_element( name = 'Receivers'
                                                                  parent = lrf_output_document ).
      lrf_receiver = lrf_output_document->create_simple_element( name = 'Receiver'
                                                                  parent = lrf_receivers ).
      lrf_element   = lrf_output_document->create_simple_element( name = 'Party'
                                                                  value = ' '
                                                                  parent = lrf_receiver ).
      lrf_element->set_attribute( name = 'agency'
                                             value = ' ' ).
      lrf_element->set_attribute( name = 'scheme'
                                            value = ' ' ).
      lrf_element   = lrf_output_document->create_simple_element( name = 'Service'
                                                    value = 'DEV'
                                                    parent = lrf_receiver ).
To fill the RESULT field a stream factory is instantiated and a XSTRING is created. When I send a message to the system, the receiver determination dumps: Error when parsing receiver listLength of XML document 129 Error when parsing receiver listLength of XML Document 129 System expected the element 'Receivers'
Looks like the XSTRING has not got the right structure and can not be parsed into the Receivers message. However, when I create a CSTRING, the message looks OK. I also changed the encoding (Codepage 4103).
When I replace the Abap mapping with a message mapping, the receiver determination works OK. However, in that case it is not possible to read the customizing table. I really need the Abap mapping.
Has anyone ever filled the Receivers massage by means of Abap mapping. Any feedback will be appreciated!

Hi,
there is a easier way - totally based on my blogs
create an abap mapping that will feed the dynamicconfiguration in ABAP (with z "Z" namespace) - similar thing shown in my blog
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
and you don't need to create the XML in ABAP mapping just parse it, fill DC and send the same source to the target
(so you don't change the XML)
then add a message mapping to your interface mapping in which you will only use dynamicconfig value
to populate the receiver segment
nice and clean way
Regards,
Michal Krawczyk

Dynamic configuration in integration process using abap mapping

Hi everybody,
i have the following scenario:
file adapter -> integration process -> file adapter
The integration process uses an ABAP mapping and sets the filename in dynamic configuration as follows:
*-- Set Parameter
 clear ls_dyn_record.
 ls_dyn_record-name = gc_dyn_config_name.
 ls_dyn_record-namespace = gc_dyn_config_ns.
 ls_dyn_record-value = <new_file_name>
*-- Write configuration
 ir_dyn_config->add_record( ls_dyn_record ).
But now the new filename is not reflected in the file adapter (receiver). In the integration monitor (SXMB_MONI) i still find the old filename.
Whats wrong?
Elko

The ABAP mapping is more complex, setting filename in Dyn. Conf. is just one step in mapping.
If I check the Workflow protocol of the Integration Process, I find the following in the Trace of the ABAP-Mapping:
The filename has been set to 3233340.SWNF00HW.P10I. The Suffix P10I has been added in the ABAP mapping.
When I check the subsequent message in SXMB_MONI I find:
The added suffix is missing in the filename !!
Elko

N:1 Mapping Possible using Java Mapping?

All,
Is it possible to do a N:1 mapping using Java Mapping?
If yes , how?
Reason for this question is that the execute() of the Java Mapping is going to take the source / request message as the InputStream . In the case of N:1 mapping , as we have multiple messages , how will they be send to the InputStream? Will both the messages be sent combined into the InputStream? Will the MESSAGES tag be embedded into the input stream?
Regards,
Bhavesh

Hi @ll;
i try the same.
to conduct a java mapping with 2 input structures that fills one target structure.
This mapping is part of a Integrationprocess.
I tested the mapping at the Integration Repository (Interface mapping) with the structure given by henrique and it works fine without any error.
At runtime this structure looks like this (different prefix)
<?xml version="1.0" encoding="UTF-8"?>
<sxi:Messages xmlns:sxi="http://sap.com/xi/XI/SplitAndMerge">
 <sxi:Message1>
 <YOURXML1>...</YOURXML1>
 </sxi:Message1>
 <sxi:Message2>
 <YOURXML2>...</YOURXML2>
 </sxi:Message2>
</sxi:Messages>
As I put it in the Integrationprocess unfortunately a strange error arises.
The trace Workflow-Protocoll shows following error.
<Trace level="2" type="T">Call method execute of the application Java mapping com.endress.infoserve.xi.mapping.MergeConfigStore_IdocOrder </Trace>
<Trace level="2" type="T">Java mapping com/endress/infoserve/xi/mapping/MergeConfigStore_IdocOrder completed. (executeStep() of com.endress.infoserve.xi.mapping.MergeConfigStore_IdocOrder </Trace>
<Trace level="1" type="T">Parsing error after multi mapping.Expected Message instead of IDOC </Trace>
I can't make head nor tail of it.
what´s the mistake?
can anybody please help me?
Thanks in advance
Kind regards

Is EOIO messaging possible using ABAP Proxy in WAS 620?

Hello,
I am trying to implement an outbound EOIO interface using ABAP Proxy on a SAP R/3 470 running on WAS 620. We have XI 3.0 running on WAS 640. I followed the SAP documentation available at http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm
I find that the interface IF_WSPROTOCOL_ASYNC_MESSAGING required in this exaple does not exist in our R/3 system. I also notice that proxy classes generated on WAS 640 have the superclass of CL_PROXY_BASIS. But the proxy object generated in WAS 620 have no superclass at all.
Does anybody know how I can get EOIO interfaces to work on the WAS 620? Did you use these objects? Can I import / install them somehow? Or, is EOIO just not possible in WAS 620?
Please let me know.
Regards
Cerish Chemparathy

HI,
have a look at this link to the ABAP Proxy Runtime based on WAS 6.20 (Xi 2.0) http://help.sap.com/saphelp_xi20sr1/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
There is a help entry called Guatanteeing the Order of Asynchronous Messages. Seems that you somehow can set a queue id for this messages and as long as theses messages are all in the same queue, the order will be maintained.
Your observations are right, there are differences between the Proxy Runtime in WAS 6.20 and in WAS 6.40 and as far as i know, there is no way to downport the 6.40 runtime to 6.20. You will need to stick with wath 6.20 offers.
Regards
Christine

Webservice to Idoc/File using ABAP mapping

Hi Experts,
I need your expert advise on below scenario.The flow of the scenario is..
1)I will get a control record from a webservice(SOAP sender adpater), this initiates the process flow.
2)based on control record ,The ABAP mapping program will call a program(within the PI sys) to fetch the data from DB table.then the ABAP mapping program will have to create 2 messages for the target. One is IDoc and another one is File.
Pls suggest the best approach.
Regards,
Srini

Hi Prateek,
Thanks for quick reply.
there is a main program which has different classes and methoda to fetch the data from DB tables.I dont want to touch this main program.
what i am going to do is, I will this main program from abap mapping by passing the control record information.based on this control record,the main program will fetch data for ABAP mapping.From ABAP mapping, i have to generate 2 messages,one for IDOc and another one is for File.
Hope you got my requirement.
Regards,
Srini

Message split ABAP mapping

Hello everybody,
for a special mappging I use ABAP mapping -everything fine.
But I need to split the message with ABAP mapping.
Does anybody know if this is possible ?
In the ABAP-class I use the interface IF_MAPPING. This has as a result parameter the parameter RESULT Type XSTRING (no table).
It only works to add to XMLs in 1 XML string, but my result have to be 2 XML files.
Alternatively would it be an idea to use multi message mapping (graphical first) AND then ABAP-mapping for special mappings?
Thanks a lot,
Florian

Florian,
for multimappings in coded mappings (xslt, java and abap mappings) you'll also create a single stream, but in this case, the stream may have the following format:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <enter your first message here>
</ns0:Message1>
<ns0:Message2>
 <enter your second message here>
</ns0:Message2>
</ns0:Messages>
where <ns0:MessageX> tags refer to each different target message type.
In the case you have a 1:n split, you'll have only 1 message type, but may have several messages within it.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <My_message id=1>
 </My_message>
 <My_message id=2>
 </My_message>
</ns0:Message1>
</ns0:Messages>
Also, remember that, when you define an interface mapping as multimapping (meaning, you set either source, target or both interfaces to multiple messages, your input stream will also contain the <ns0:Messages> and <ns0:MessageX> tags, so you need to treat them in your mapping program.
Regards,
Henrique.

Is multimapping is possible using abap map

Similar Messages

Maybe you are looking for