Is my 801AP Configured for N or only G?

All,
Would you mind taking a look at my attached config and comment on whether or not I'm configured to support N or only G?
If I'm only running G, can you recommend the configuration commands that will enable G & N support?
This 801AP is integrated to my 881W router. The 801AP is running IOS 12.4(21a)JY
Thank you!
James E

1.) Before I make your suggested configuration change, can you tell me if my current configuration is offering G only?
Your configuration is set for a/b/g. 802.11n "requires AES cryptography be performed on all encrypted links. This means that you can get away with an open WLAN, but if you flip on Layer 2 crypto functions, you need to have Wi-Fi Protected Access 2 AES-enabled (with either Pre-Shared Key or back-end authentication, authorization, and accounting) or that WLAN won't work at all for 11n rates. You can go for a mix of crypto types (WPA with Temporal Key Integrity Protocol or AES and WPA2 with TKIP), just as long as you have WPA2 with AES-enabled".
2.) Assume that all of my WiFi clients support N. When I make your suggested changes, do I need to change anything on my WiFi client configurations?
Configure the Client for 802.11n

Similar Messages

Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

In our java web application trying establish the connection for sharePoint 2013
using Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
claims only.
In the Sharepoint 2013 server in the IIS manager settings for authentication it is enabled for both Windows claims and Forms authentication,
but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
you" in the browser Kindly help me on this.

Hi,
This issue is always caused that you had missed FBA configuration in web config of your web application.
You can configure the FBA authentication then check whether it works.
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
more reference:
http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Define Tabs and Process Configuration for Template

Hi All
I would like to give the local HR the ability to define Tabs and Process Configuration for Template
The only way I can find to create these definitions is using SPRO and I don't want to give HR users SPRO
Is there a transaction which will allow the HR users to define Tabs and Process Configuration for Template?
Thanks
Maya

You can try this URL:
http://server.domain:port/sap/bc/webdynpro/sap/hap_configuration?WDCONFIGURATIONID=HAP_AC_TAB_CONF
Just change server, domain and port to match your SAP instance.

LDAP Configuration for ECC 6.0 ( ABAP Stack only)

Hi,
Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only).
Some of my observations are....
I can see the LDAP Support in the Installation master at the following path.
1. Additional Software Life cycle Tasks --> Application Server --> LDAP Support.
But the prerequisites for this task is given as "You must have extended the LDAP schema for the sap data types before.".
When i am goint thru service market place i came across the following note.
Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
Thanks,
Tanuj

Dear All,
We are trying to configure the LDAP using with active directory . In the
step of "Synchronization of SAP User Administration with LDAP
Directory"when executing the report"RSLDAPSYNC_USER" we are facing one
error.
Please find the trace file and error screenshot in the attachment.Please help us on
priority.
Please find the Trace log in the below:
RFC destination : LDAP_LDAPSE-01
Tracelevel      :      8,704
F5: Shutdown F6: Clear list F7: Dump status F8: Refresh list
[Wed Jun 26 11:15:38 2013]
Slot 0 (WIPROTECH): >>> ldap_initU(host="abg-mumabc-dc1.abgplanet.abg.com", port=389)
[Wed Jun 26 11:15:39 2013]
Slot 0 (WIPROTECH): <<< ldap_initU() == <NOT NULL> := connected
Slot 0 (WIPROTECH): >>> ldap_set_option(version=3)
Slot 0 (WIPROTECH): <<< ldap_set_option() == 0
Slot 0 (WIPROTECH): >>> ldap_simple_bind_sU(dn="poornataad", password: not initial)
[Wed Jun 26 11:15:40 2013]
Slot 0 (WIPROTECH): <<< ldap_simple_bind_sU() == 0 := success
[Wed Jun 26 11:15:43 2013]
>>>>Required attributes table
Line    0: "CREATETIMESTAMP" (length 15)
Line    1: "MODIFYTIMESTAMP" (length 15)
Line    2: "SAPUSERNAME" (length 11)
<<<<Required attributes table
Slot 0 (WIPROTECH): >>> ldap_search_sU(base="CN=poornataad,CN=Users,DN=abgplanet,DC=abg,DC=com", filter="(&(OBJECTCLASS=user)(SAPUSERNAME=*))", scope=2)
Slot 0 (WIPROTECH): <<< ldap_search_sU() == 91
>>> ldap_msgfree()
<<< ldap_msgfree()
Slot 0 (WIPROTECH): >>> ldap_unbind_s()
Slot 0 (WIPROTECH): <<< ldap_unbind_s() == 0
Please find the error screenshot in the below.
Regards,
Dilip Sampath.CH
+91-9619735957.

Best 5GHZ n-only configuration for AEBS?

Hi all,
I'm trying to find the best configuration for my AEBS. I have a number of MBPs and MBs in my house but they all get terrible range. The speed is good when it's within about 30-40 feet, but it just drops off right after that. I've got a good amount of cemented walls so I'm sure that's affecting it some, but I'm fairly disappointed that I can't even get 100 feet of range. These are the settings from the Airport Utility:
Radio Mode: 802.11n only (5GHZ)
Channel: Automate
Wireless Security: RADIUS
Country: US
Multicast Rate: 6 Mbps (should I up this to 24 Mbps?)
Transmit Power: 100%
Use wide channels: Yes
Is there anything else I should be trying, or am I just expecting too much? I've got a few other routers that I've souped up with antennas and weatherproof enclosures, but I prefer Apple gear whenever possible. Thanks!

Really? I wasn't aware of that. Every review I've seen said that the 5GHZ n mode gave far better range and speed than a 2.4/g router. I've got three other routers running on the 2.4 band for the machines that don't have n-compatible cards, so I'm out of channels.
But I'll run some tests with it in 2.4-only mode. That definitely follows the behavior I've noticed of my 2.4 routers getting better range than this one.
Thanks!

Configure SUP location for IBCM (Internet Only) Clients

I'm using ConfigMgr 2012 R2 with a single primary site. I have a second site server deployed in the DMZ configured
for Internet clients. I have a Internet MP and DP configured with SSL and they are working well.
I have a question about how to configure the SUP for internet only clients. I configured my internet facing SUP to require SSL and configured it for Internet and Intranet clients.
I installed the ConfigMgr 2012 client on my test machines with the CCMALWAYSINF=1 option to be connected internet only.
The clients are not getting a local policy to connect to the SUP and if I add the internet SUP in the local group policy myself it doesn't do anything. If I run the "windows updates" cycle from the Windows Update client (NOT
ConfigMgr) it seems to connect and sync with the SUP (WindowsUpdate.log) but ConfigMgr does not appear to recognize the SUP and doesn't point the clients to connect to it and upload the results.
Any Ideas how to force my clients to connect to the internet facing (IBCM) SUP to scan for required updates? Anybody deploy a internet SUP lately that can provide some guidance? Thank you very much

Check the log file(s) on the Internet facing site system. The easiest method to check the sync status is by going to the monitoring workspace in the console and then look at the
Software Update Point Synchronization Status node.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

UNX configurations for MS Analysis Services is only through XMLA!!??

In BOBJ4.0, I just Wanted to confirm if the UNX configurations for MS Analysis Services is only through XMLA.
Is there any way BOBJ4.0 can be configured to use MSAS OLEDB for OLAP?
One of our client does not want to go thru XMLA connectivity to their MSAS CUBES, this is possible thru Universe Design Tool but not with IDT.
Can anyone please help on this?

UNX - XMLA
UNV - OLEDB
those are the choices.

Can an iPad purchased only for Wi-Fi be configured for 4G?

Can an iPad purchased only for Wi-Fi be configured for 4G?

If you want cellular on a Wi-Fi only model you'd have to buy a mobile hotspot like a MiFi.

How to do Apache configuration for two different domains

Hi ,
I was just trying out some clustering workshop on weblogic. I faced a issue..here is the scenario :
I have two clusters :
Cluster1 : 3 managed servers (server1,server2,server3)
Cluster2 : 2managed servers (server4,server5)
I have two sample applications which i have deployed on these two clusters i.e app1 on cluster1 and app2 on cluster2.
These two aplications are deployed successsfully as i am able to open these applicatons from browser by calling the individual port of the managed server like : http://localhost:7003/app1.
Now i have installed a apache server on my laptop and configured the http.conf file.
Issue : I am not able to call both the application from apache. If there is only one cluster then it is working fine and for two application only one cluster (application) is working that too whose port is defined in the last.
Here are the contents of my httpd.conf file :
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl.so
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin <adminurl>
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName <servername>
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://<url>/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402<url>/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
So here for the above configuration only app2 i am able to call and for app1 its saying "404 page not found".
Can soomebody help me in cofiguring apache so that i can call both the applications.
Thanks,
Ankit

>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

Getting SPWeb.CurrentUser as null with Windows Authentication (AD), when configured for Claims Authentication

Hi All,
We recently migrated to SP 2013 from SP 2010. We are using most of the OOB features, with a few custom code. We have implemented a custom ASP.NET Membership Provider that authenticates against a web service. This was working fine on SP 2010.
The entire code base was migrated to SP 2013 (with .net fw 4.5, etc) and any issues Compile / Runtime were fixed. However, we are stuck at one bug, which seems to be occuring only while trying to login with Windows Authentication. When a user tries to login
with Forms Authentication, the error is never noticed.
Scenrio: Login as Windows Authentiction.
Result: The user is signed into the system and is authenticated against the AD. For random page loads - it throws access denied (even though he is a site collection admin). While attaching a debugger, we found that, at times the SPWeb.CurrentUser is null (weird).
At the same time, the HttpContext.Current.Request.IsAuthenticated returns true. Which means the User is Authenticated, but not available in the SPWeb.CurrentUser object.
Attached are couple of ULS Logs that we found. The line which says IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 is a little disturbing. Can you please let me know what is happening here? I am not able to access the root site (http://win2012d2:1234/)
however, i am able to access (http://win2012d2:1234/SitePages/Home.aspx) just fine, without any issues.
Please note, this error is only when the user is logged into sharepoint as a windows user. The forms user faces no such issues.
ULS Logs:
Name=Request (GET:http://win2012d2:1234/)
Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0
Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Getting Error Message for Exception System.ArgumentException: Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
Unknown SPRequest error occurred. More information: 0x80070005
SPRequest.GetPageListId: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPContext.get_ListId()
at Microsoft.SharePoint.SPContext.get_List()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
SPRequest.OpenWeb: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPWeb.InitWeb()
at Microsoft.SharePoint.SPWeb.get_WebTemplateConfiguration()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Mohamed,
According to your description, my understanding is that the error occurred when users login with Windows Authentication.
From the error message, I recommend to check if the anonymous access is enabled for the web application.
And please also make sure that the users all are available and have permission to access the site.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/28623bdc-a2f0-4876-9be4-9a764f106366/getting-spwebcurrentuser-as-null-with-windows-authentication-ad-when-configured-for-claims?forum=sharepointdevelopment
Best regards.
Thanks
Victoria Xia
TechNet Community Support

MM configurations for SAP AFS System

Hi,
        I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
       Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
      GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.

Hi Nasir;
Some possible causes are;
1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2.     Not releasing the PO before the GRN
3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

How to configure for remote JMS client?

I have my own Java JMS test program for performance measurements.
          I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
          SINGLE MACHINE TEST
          ===================
          In a single machine environment I was able to
          - configure a JMSServer
          - configure a JMSSystemModule
          - configure resources for ConnectionFactories and Queue and Topics
          I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
          The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
          Everything works.
          TWO MACHINE TEST
          ================
          I now have a second machine.
          I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
          But I really don't know quite how to proceed from here...
          Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
          What is necessary configuration for JNDI access on the sender machine?
          Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
          I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
          Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
          Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
          Thankyou.

Hi,
          My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
          I am using weblogic 9.2 as my app server.
          When my applet is executed on JRE 1.5x it works fine.
          But when I use JRE1.4x it gives the following exception
          java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
          at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
          at java.lang.Class.forName0(Native Method)
          at java.lang.Class.forName(Class.java:141)
          at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
          at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
          at java.lang.Class.forName0(Native Method)
          I have analyzed the reason for this.
          the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
          In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
          I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
          java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
               at java.lang.ClassLoader.defineClass0(Native Method)
               at java.lang.ClassLoader.defineClass(Unknown Source)
               at java.security.SecureClassLoader.defineClass(Unknown Source)
               at sun.applet.AppletClassLoader.findClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at sun.applet.AppletClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClassInternal(Unknown Source)
               at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
               at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
               at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
               at weblogic.jndi.Environment.getContext(Environment.java:307)
               at weblogic.jndi.Environment.getContext(Environment.java:277)
               at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
               at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
               at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
               at javax.naming.InitialContext.init(Unknown Source)
               at javax.naming.InitialContext.<init>(Unknown Source)
          I really need to support clients using Jre 1.4 and Jre 1.5
          I will really appreciate any help on this one.
          Please advise.
          Thank you all.

Is my 801AP Configured for N or only G?

Similar Messages

Maybe you are looking for