Is my connection good or bad?

Ping 39ms Download 6.11mbps and Upload 0.94mbps

I couldn't print screen because I'm on my phone
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 0 days, 20:07:52
Downstream: 7.563 Mbps
Upstream: 1.125 Mbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Fast
Noise margin (Down/Up): 6.2 dB / 5.7 dB
Line attenuation (Down/Up): 35.6 dB / 22.4 dB
Output power (Down/Up): 19.9 dBm / 12.4 dBm
FEC Events (Down/Up): 0 / 0
CRC Events (Down/Up): 2206 / 183

Similar Messages

Fios Internet connection is very bad! Please help!

Hello,
I play an online game called Final Fantasy XIV. I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS. I contacted WTFast with a tracert that they analyzed, and here is their response:
"Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
015-02-25 00:09:36
Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
—— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
February 25, 2015, 11:56
I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss. I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.
Can anyone help me out with this please! Thank you for reading!

bap4201 wrote:
I'm trying to, but can't seem to format it properly
Open a command prompt and enter the tracert command
then select the cmd prompt icon - top left of the cmd prompt window
select edit, mark
highlight the data you want to copy - the tracert data
select the cmd prompt icon again
select edit copy
put the cursor in the post window in the forum
and hit ctrl-v - as below
C:\Users\Peter>tracert wtfast.com
Tracing route to wtfast.com [190.93.243.228]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
.1]
3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
.212.48]
4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
51.220]
5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
6 * * * Request timed out.
7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
78]
10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
52.174]
13 11 ms 12 ms 11 ms 190.93.243.228
Trace complete.

It's working, but is it a good or bad design?

hiya
I hope I�m not breaking any forum rules, but any help would be greatly appreciated.
I haven�t really done any programming so far, so finally writing an app with more than few lines of code was something different. Anyways, I managed to write it, but truth be told, I have no idea whether my design choices ( I�m not sure if that�s the right term ) were somewhat good or completely off. Thus, if I don�t know what parts of program are designed badly ( and why they are considered bad), then I won�t know where to improve. So I�m hoping someone could point out ( at least the most obvious )design mistakes I made.
It�s a simple �chat� server where several clients ( up to twenty ) can connect to the server and talk to each other. In essence:
1.server creates new client thread for each newly accepted connection
2.if one of these client threads receives some data from the client, then:
3. this client thread creates new ControlThread object (and passes received data to it )
4. ControlThread object in turn spawns a new thread
5. Finally, this spawned thread will send data to all client apps.
I must point out that I could handle some things better using collection classes. But ignoring that, I�m most interested in other design flaws I made. For example:
a) how scalable is this server app?
b) what would you�ve done differently ( in terms of basic program structure )? Perhaps creating ControlThread object each time data needs to be sent to other client apps is a bad idea
c) etc
package serverchat;
import java.net.*;
import java.io.*;
public class Main {
    public static void main(String[] args) {
        Server.runAll();
class Server{
    static int servPort = 1600;
    static ServerSocket servSock;
    static Thread controlThread;
    static ClientHandling[] clientClass=new ClientHandling[20];
    static int numClients = 0;
    static Socket clientSockets[] = new Socket[20];
    static void runAll(){
        initServer();
        handleClient();
    static void initServer(){
        try{
         servSock = new ServerSocket( servPort );
         catch(Exception e){}
    static void handleClient(){
        try{
            while(true){
              clientSockets[numClients] = servSock.accept();
              clientClass[numClients] = new ClientHandling(clientSockets[numClients]);
              numClients ++;
        catch(Exception e){
/*Each time some clientHandling thread receives data from client,
it creates new ControlThread thread. This thread then sends this data
to all clients connected to this server*/
class ControlThread implements Runnable{
    ClientHandling[] clientClass=new ClientHandling[20];
    int numClients;
    String message;
    Thread t;
    ControlThread(String message){
        this.message = message;
        this.numClients = Server.numClients;
        this.clientClass = Server.clientClass;
        t = new Thread(this);
        t.start();
    public void run(){
        System.out.println("ControlThread has started");
               for(int i= 0; i < numClients; i++){
                   if( clientClass[i] !=null ){
                       tellClients(i);
    /* sends data to all the clients. It does this by calling contrToClient()
     on an object that received this data from the client*/
    void tellClients(int i){
           clientClass.contrToClient(message);
class ClientHandling implements Runnable{
Socket clientSocket;
Thread t;
String message;
OutputStreamWriter clientWrite;
InputStreamReader clientRead ;
BufferedReader readBuf;
BufferedWriter writeBuf;
ClientHandling(Socket s){
clientSocket = s;
startThread();
void startThread(){
t = new Thread(this);
t.start();
public void run(){
try{
clientRead = new InputStreamReader (
clientSocket.getInputStream(), "utf-8");
readBuf = new BufferedReader (clientRead);
catch(Exception e){
do{
try{
clientSocket.setSoTimeout(1000);
message = "";
message = readBuf.readLine();
if ( !message.equals("") ){
informContrThread();
System.out.println(message);
catch(Exception e){
}while ( !message.equals("Stop") );
try{
clientSocket.close();
catch(Exception e){
/*this is the actual method that gets called by ControlThread object and
sends received data to all the client apps*/
void contrToClient( String message){
try{
OutputStreamWriter clientWrite = new OutputStreamWriter (
clientSocket.getOutputStream(), "utf-8");
writeBuf = new BufferedWriter (clientWrite);
catch(Exception e){
try{
writeBuf.write(message + System.getProperty("line.separator"));
writeBuf.flush();
catch(Exception e){
try{
clientSocket.close(); /* I assume I should close the connection
with client if write() throws an exception? */
catch(Exception e1){}
/*creates new ControlThread object, which in turn will
make sure all client apps receive this data*/
void informContrThread(){
System.out.println("informing contrThread");
new ControlThread(message);
thank you

1.server creates new client thread for each newly accepted connection Good. Make sure the server doesn't do any I/O in the accepting thread, including even construction of input and output streams.
2.if one of these client threads receives some data from the client, then:
3. this client thread creates new ControlThread object (and passes received data to it )Why? What does the Control thread do that the client thread can't do? Does the client thread really create a new Control thread per piece of received data? What's the purpose of the Control thread here?
4. ControlThread object in turn spawns a new thread Again why?
From your description you appear to be creating:
(a) a thread per connection
(b) a thread per piece of received data
(c) another thread per (b)
What you probably need for a chat server is an input thread and an output thread per connection. The output thread should read a queue and the input thread should write to the appropriate queue(s), making sure you don't create a loop by sending the client's own data back to him.
5. Finally, this spawned thread will send data to all client apps.No. Use one output thread per connection, as described above. As writing to a socket can block, you shouldn't use a single thread for writes to more than one client, otherwise the whole system can stall due to one non-co-operating client.
a) how scalable is this server app?It's about as non-scalable as it could possibly be. You will have an explosion of threads per item of data received if you've described it correctly, and you already have too many threads per connection.
b) what would you�ve done differently ( in terms of basic program structure )?Almost everything: see above.
Perhaps creating ControlThread object each time data needs to be sent to other client apps is a bad ideaMost definitely.

Migrating assistant good or bad

Hi guys...
This is my first post so be gentle... I just have a small question for you guys and girls... what is your view on the migrating assistant, is it good or bad... i have heard someone saying that it migrates some files over that mess up your system... and if it does how do i know which to delete.. and second of all can you choose exactely what to bring over or does it just take everything... is targetdisk mode a better option... maybe a bit more timeconsuming but safer...?? Please give me your opinions... Thanks... ohh forgot to say, reason why im asking is that im planning on buying the infamous MBP..
Mac OS X (10.4.6)
ibook g4 1.33 Mac OS X (10.4.6) Really want MBP

I would say that this is a WARNING [capital letters - if you can't tell already ;- ) ]
My friend - who is a computer tech [Mac & PC] since the Apple II days. For all of you that don't know - that is 30 years ago. He bought his first BRAND NEW computer ever - yesterday - A MacBook Pro 2.16 w/ 7200RPM HD [off the shelf at a local Apple store]. He has made a LOT of money from repairing computers - he didn't have to buy this MacBook, because he has EVERYTHING else - he bought it because the MBP represented the ability to have the Mac OS + WIN XP on the same machine. And also - his clients were asking questions about the MBP, and he had to know - first hand, what they were about.
He used the migration assistant to transfer his files from his PowerBook G4 - 17" [1.67MHz] - and there was disasterous consequences! After the transfer - the new MBP wouldn't boot to the desktop - until several restarts later. Finally when he could - there was some very weird stuff going on.
1. No Airport recoginition
2. Screen stayed on full bright [couldn't be dimmed]
3. His BlueTooth cellphone would shut off [I know - this is crazy - but it is true, the MBP somehow killed the cellphone connection!]
4. Kernel panics - [many]
He [with 30 years experience] promptly returned the MBP to the Apple store - and showed it to the "Genius" - who immediately gave him a brand new one.
He [or the "genius"] never had any reason to doubt the "integrity" of the "Migration Assistant". My friend thought that his MBP was defective - and the Apple "Genius" thought the same thing.
So - he took it [the new one] home - and used the "Migration Assistant" again - and the exact same thing happened!
Finally - he just decided to re-install the whole operating system [clean install] - and now everything is fine.
If I were you - I wouldn't trust the "Migration Assistant".
PM G5 1.8 SP REV A Mac OS X (10.4.2)

IPod touch - IS IT GOOD OR BAD?????

i have just bought an ipod touch and my personal view is excellent!
98% works perfectly - just the safari web brouser can be slow (eventhough im on highspeed wireless broadband)
i love the coverflow and scrolling is amazing with a flick of a finger
buying on the move is a big bonus - i've just been to scotland and was in a wifi area and bought a couple of songs! it only takes seconds aswell!
pictures are clear and easy to see and zooming in by 'pinching' is clever and works well.
obviously videos are good and so is music!!!!
thats what i think about the Ipod touch what about you - please leave your comments on it - good or bad..............

What I have found disappointing so far is web access on the ipod touch: I have not been able to log on to any commercial network (= requiring some sort of authentication) for example in hotels. It seems that Safari on the ipod touch does not support certain functions required. The connections worked flawlessly from Safari on my Macbook so it seem to be a ipod touch issue (I assume the same goes for the iphone).

Internal Domain Names (good or bad?)

I'm just trying to establish what's good or bad about internal domain naming. I've currently got server.office (when viewed internally) but server.externaldomain.co.uk when viewed externally. But now the time has come to upgrade the servers and it seems a good time to reevaluate the naming and ip status of stuff. My question is that should a network's server and computers have internal dns (ala .office) or external naming linked to internal ip's (computer01.external.co.uk - 10.0.0.2)? What's the advantages of both.
Thanks.

Personally I'd stick with the same name from a user's perspective, independent of whether you're using separate DNS zones internally.
Using mail as an example, you might configure 'mail.domain.co.uk' as the hostname for your mail server.
By publishing that name in both the internal and external DNS you only need to tell users to configure their mail client to talk to mail.domain.co.uk and they'll always get connected. The magic of DNS means they'll resolve the public IP address if they're outside the network, and the private IP address if they're in the office (or on VPN, etc.). Now users don't need to maintain separate mail profiles for internal and external accounts.
Now, whether or not mail.domain.co.uk is the actual hostname of the machine on the internal network is a different matter altogether. This could easily be CNAME'd to mailserver.office on the internal zone, allowing you to maintain the .office zone on the inside network which has advantages in that you know you should never serve .office to external clients.
Personally, in my network, there are no externally-visible hostnames that match the actual machine names.

Wanting to buy a refurbished Ipod Nano 3rd generation....Good or Bad

I had purchased the 2nd generation Ipod Nano (display unit) though never played, but when I got it home and synced music onto it the music showed up in the Ipod when connected to the computer thru the USB cable, but once I would unplug the unit from the computer, the Ipod wouldn't even power up. So, I took it back - now I need to replace that one for my daughter. I can't seem to find the 2nd generation Nano's anywhere, but on the Apple website, they have the 3rd generation Ipod Nano silver on clearance but like title states it is REFURBISHED, is this good or bad? I need to know asap, so that other arrangements can be made, just in case I need to look further on Ebay or other forums that list items for sale. Thanks, And I hope to hear from someone real soon. Melissa

Apple's refurbished stuff is supposed to be very good.
Although I have not purchased any of it myself, I know people who have who have all been very happy with it.
Question. Is your iPod still under the 1 year warranty? If so, you can send it in for service.
Check this out:
iPod Service Request
I hope this helps!

Placing a PDF file in an InDesign Doc and PDF again for a vendor- Good or Bad?

Current debate in the graphics department is
Is it good or bad to place a PDF (general Press Quality) into an InDesign document and then creating a new PDF file with print vendor settings from that document?
My thought is that you in some cases are double compressing, lower dpi images getting compressed, RGB color mode images okay on layout but now are converted to CMYK and shift in the PDF.
Are there other issues and if so what are they.
Also is there an easy way to check ppi, color mode and compression of an acrobat PDF? I mean other than doing a preflight and searching into each image folder twenty levels deep. FlightCheck and Enfocus are not options,
too many vendors and not enough time.
Thank you all in advance for your words of wisdom.

Dov, I just got off the phone with a trusted professional in the Prepress field at a quite reputable print house, and he said "Dov is the guru of PDFs, ask him this...Will the InDesign CS3 preflight see the characteristics of a PDF (color mode, dpi(ppi), compression) if the original placed PDF is created as a pdf .X4 (1.7)? Ask him also if you were to use one form of compression (say lossless) in the original PDF, and then another form(say lossy) in the vendor PDF would it hold both or convert the first PDF compression to the second form?"
Any other responses are also welcomed.

HT2105 When you get a apple receipt for itunes songs and you paid with a itunes gift card do they charge you or give you store credit what's store credit is it good or bad or does it charge you if you have a free account with no credit cards at all is it

When you get a apple receipt for itunes songs and you paid with a itunes gift card do they charge you or give you store credit what's store credit is it good or bad or does it charge you if you have a free account with no credit cards at all is it bad?

iTunes credits are, for example, if you download a song from the store and it's found to be corrupt - if the track can't be fixed then iTunes support will tend to give you a song credit for a free download.
When you purchase music from the store then any credits that you have will be used first, then any balance that you have (e.g. from iTunes gift cards or allowances), and any remaining amount will be taken from your credit card.

Goods and Bads with the 6110 Navigator

Hi
New user of this forum and a proud owner of a Nokia 6110 Navigator. I had the 6280 but after 2 SW upgrades and still problem with it, I gave up.
First impression of the 6110 is good, but I found a couple of small things that ”irritates” me.
1 – The timer function when you write “0200” and press options instead of green (call) button.
2 – The original headset is too cheap to be an expensive phone like this, should be more like Koss “plug-in-your-ear” kind of headphones, instead of the small “put-close-to-your-ear” thing that is included.
Also, the straight up cable from the top of the phone is no good. Makes the phone lie bad in the pocket. I also guessing that this cable is going to snap after a while. Why not a 90 degree “adapter” or something?
3 – When you sending an SMS, on my 6280 you could choose “last used number” or something like that, now you have to choose name, and then number, and then OK to go back to the SMS.
Well.. that’s it so far. Anyone else have goods and bads about this phone ?
mvh / regards
Timmy

hi im havin same issues!!
i went from 6280 to 6110 after i smashed it
1.first off i didnt kno of the timer option...good bcoz it was annoyin not havin a stopwatch
2. that "recent use list"...lack of it...is annoying. i just made groups of ppl i msg most
3. menu organisation is confusing
4. in call history, it only shows most recent time for that entry, ven if they rang 5 times that day, also they dont show call long eg duration of 3mins 40secs
5. on my 6280, i had a shortcut menu as mi left select button, cant do this now
6. power button is end call button, lotsa accidental turn offs
7. cant turn off start up tone
oh well i still like it

Is this good or bad in terms of battery life?

So I have a question, my usage is 1 hour, 11 minutes; standby is 13 hours, 29 minutes. This is since the last full charge on my iphone4s and now the battery is at 68%. Is this good or bad, and the thing is when I used certain apps like words with friends even for 2-3mins I actually noticed the battery life going down 2%, and I know that because I have the option for showing the battery percentage switched to on. It's frustating that I'm doing the simplest task like going through settings and the battery is draining so quickly. Does anyone have and suggestions about increasing the battery life?

The short battery life is an issue of iOS5 that should be fixed with the next updates. ( also hope that Apple would fix it fast)

What is a good download broadband speed. Mine is 4.17mb/s. Is that good or bad?

What is a good download speed. Mine is 4.17mb/s is this good or bad?

It's average. Do you have cable or DSL? I'm moving into an apartment that has cable speeds of up to 20 megabits per second. Cable speeds do vary and, at the low end, run around 5 megabits per second.
So - cable or DSL. If cable, call your local ISP and see if they have a package with higher Internet speeds.
Clinton

Clean my mac, is it good or bad

Hi, I have seen the software clean my mac some say it's good, some say it's bad, can you tell me if it's good or bad, thanks.

In regards to keeping your Mac happy... have a look at these Links...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html

Updating iphone3 is it good or bad?

updating iphone3 is it good or bad?

updates are always good. you should always update as soon as you have an update available.

Panasonic AG-DVX100b good or bad?

Hey guys ok so i have tons of problems with my canon gl2... anyone out there DONT GET IT!! if your going with fcp for all i know 1. dropped frame rates alllll the time look at other peoples comments its true! 2. myn has a rewind issue.... its really annoying. Anyway thats not what im here for i am thinking of sellign my canon gl2 and getting a Panasonic AG-DVX100b since everyone says it works great with fcp 6 can you give a good or bad? tell me whats good about it whats bad... any info i should know... and if it works good with Final Cut Pro 6... i hope you help me out if you need this im on a macbook pro with final cut pro 6.0 and its a panasonic ag-dvx100b i hop that covers it!

Of course you find only ISSUES when you search the forums for the GL2...who posts that they are having success? No one walks into a doctor's office and says, "My arms feel really good, and my lungs are clear." No, they go to the doctor's office saying "I am having trouble breathing, and I broke my arm."
If you search the forums, you see plenty of posts with people having issues with DVX cameras too. Especially the forum dedicated to that camera. True, Canon cameras are a bit more finicky, but they work fine. Some have issues, others do not.
Shane

Is my connection good or bad?

Similar Messages

Maybe you are looking for