Is my lenovo that compatible with hp printer 3070a

bought a lenovo t410 and wondered if my hp printer wiull be compatible 
hp desktop 3070a    ?

viviennegb3014 
Welcome to the HP Community Forum.
Perhaps -- if this is your printer, then there is Full Feature Software for it and that is always a good sign. 
HP Deskjet 3070A e-All-in-One Printer - B611a Drivers
A bit more detail on how to install printer software is included in this document:
Install Full Feature Software – Printer
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP. 
Kind Regards,
Dragon-Fur

Similar Messages

  • I have an Imac using the old Classic operating system.  The printer I was using died and I need a new printer that will work on the OS 9.1/9.2 operating system.  Does the install disk that comes with the printer allow the computer to communicate with the

    My printer died and I need a printer that is compatable with OS 9.1/9.2.  Some printers say they are compatible with OS 9.1/9.2 but do they need a driver or is it included with the install disk that comes with the printer?

    As long as the printer is accurately described as being compatible with OS 9.1/9.2, if it needs to have software (such as drivers) installed that software should either be included (usual) or downloadable from the net(usually from the manufacyrer's website).
    Not all non-Apple printers need drivers installed. Some, such as many Postscript ones that connect via ethernet, are quite comfortable using the LaserWriter 8 printware that's part of OS 9. Some of those, though, may need to have a model-specific PPD (Postscript Printer Description) installed, a small document that informs the printware of the capabilities of the printer.

  • I have a Canon Vixia HV30 and would like to know if I can transfer video from it to a new MacBook Pro? The camcorder has a HDV/DV output. Is that compatible with firewire?

    I have a Canon Vixia HV30 and would like to know if I can transfer video from it to a new MacBook Pro? The camcorder has a HDV/DV output. Is that compatible with firewire?

    Hi Codye24
    I don't know if you saw this thread
    Connecting a Canon HV30 camcorder vai a thunderbolt port to a new imac
    Hope that this helps
    Kevin

  • I have a mac os x version 10.6.8     is that compatible with CC?  koz i cant download it

    i have a mac os x version 10.6.8     is that compatible with CC?  koz i cant download it & it tell me:  You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

    If you look thru the requirements for the applications you are likely to find 10.6 does not meet the tech specs.
    http://helpx.adobe.com/creative-cloud/system-requirements.html#System requirements

  • I want to search a few add ons that compatible with Mozilla Firefox version 2.0.

    want to search a few add ons that compatible with Mozilla Firefox version 2.0.
    why can I no longer search it with this URL https://addons.mozilla.org/en-US/firefox/advancedsearh,
    pls give me a clue, so I can search the add ons that compatible with my earlier firefox
    Regards
    Goerchka

    Correct the spelling of search on your link to
    :https://addons.mozilla.org/en-US/firefox/advancedsearch
    :and it would appear that the search would work, use the little dropdown underneath the big green arrow to actually pull up the advanced search you asked for, and it appears to work, I didn't actually bring up any of the results.

  • Find some apps thats compatible with 4.2.1 IOs?

    Hi! Plz tell me how can i find some apps thats compatible with 4.2.1 IOs? Some kind of sort or something?

    HT4208 games and apps for ios 4.2.1: Apple Support Communities

  • Printers compatible with C4191A printer cartridge

    How can I find out which other printer are compatible with cartridge C4191A ?
    (This cartridge is for 4500, 4550 but I ended up with ~20 cartridges sitting on my shelf after 4500 series printer died (horrible printer, took forever to warm up). )

    With the following link you can find the compatible models, looks like only the 4500 series though.
    http://www.shopping.hp.com/store/product/product_d​etail/C4191A
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • What is the best outdoor AP that compatible with the WLC 5508?

    Dear All,
    hope my email finds you well
    i'm searching for the bes Wireless Outdoor AP that is compatible with WLC 5508 (has a lightweight Image)?
    I used befor the 1310 LAP but it was nightmare to me, so I do not like to use it again and i'm searching for the new generation of the outdoor,
    many thanks in advance,
    Ahmed

    Can you give us more information about what you are planning to do?  The latest outdoor WAP is the 1550 but it's MESH.
    Otherwise, you can use the 3500, 3600 or the 1260.

  • Error "printhead problem please use setup cartidge that came with the printer"

    Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...",  then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible  by printer but when i use the black then it says "properly not installed, missing cartidge".
    So please tell me  do i need to purchase a new black cartidge, will it work? or what shoud i do ?
    cartidge NO- 685
    Thanks
    Nirmal

    Hi @nirmal007,
    Welcome to the HP Support Forum!  I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer.  I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue. 
    I recommend you try the following steps before you consider purchasing a new black ink cartridge.  Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
    Secondly:
    Make sure that the ink cartridges are properly vented and seated correctly
    If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
    Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
    Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
    Figure : Remove the cartridge from the slot
    Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
    Figure : Vent area on the top of the cartridge
    If the cartridge still has the orange pull-tab attached, pull to remove it.
    Figure : Orange pull tab
    If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
    Figure : Clean the clogged vent with a pin
    Clogged vent
    With a straight pin, gently remove excess adhesive from the vent
    Unclogged vent
    With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
     note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
    Figure : Reinsert the cartridge
    Repeat these steps to inspect the vents on each of the cartridges.
    Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
    Close the cartridge access door.
    Figure : Close the cartridge access door
    Source
    Thirdly, try cleaning your cartridge contacts:
    Manually cleaning the print cartridge contacts
    Follow the steps below to manually clean the print cartridge contacts:
    Gather the following items to clean the contacts:
    Distilled water (tap water may contain contaminants that can damage the print cartridge)
    Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
    Open the print cartridge door.
    Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
     caution:
    Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
     caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
    Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
    Gently wipe the copper-colored contacts with the cotton swab.
     caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
    Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
    Insert the print cartridge in the printer, and then close the print cartridge door.
    Source
    If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one.  Let me know if this helps.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Do i need to use the phone line that came with the printer to fax paperwork or can I buy a new one?

    This question was solved.
    View Solution.

    Hi Willcarter,
    It is all up to you. You can use the phone line which came with the printer or you can get a new one. It does need to be a 2-wire phone line though.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • External keyboard that compatible with mac

    I'm using macbook pro 13 inch with mountain lion installed in it. I want to use external keyboard because i want to keep a distance between my eyes and the screen. But i want a wired keyboard, and for me I will not choosing wireless keyboard because it use some batteries. Also sometime the bluetooth connection not so good (in some cases i read in the review). I know that apple has its own keyboard but for me the price still expensive for a wired keyboard. So, what is the keyboard that suite with mac? Is it all keyboard including windows type keyboard? Any cheap keyboard compared to apple's one?

    Jill,
    Boy you hit an old thread. I don't know that zikeryn is still around, so I'll throw my thoughts in here. My first Apple USB Extended keyboard lasted about 1 1/2 years - and the I (stupidly) tried to clean it with a very moist (read WET) micro-fiber cloth and got liquid in the keyboard. My bad, so I can't blame the keyboard. I rushed right out (to Amazon) and purchased another. I love this keyboard - I was lost when I had to go back to using my built-in keyboard. It's sturdy like a brick - it just doesn't like water!
    I would urge you to go for it - unlike third-party keyboards that may have drivers, System Preference panes, etc., this on just, as I said, WORKS.
    Good luck,
    Clinton

  • How do I find the photo software that comes with J3608 printer?

    I recently bought a computer with Windows 8.1 and downloaded the compatible printer driver for my All-in-One J3608 printer. On my old computer, with Windows XP, when I installed the same printer, it came with a photo program. But the new printer driver either doesn't come with photo program, or I can't seem to find it on my computer. I just want to edit my photos. Does the new printer driver come with a photo program or do I have to download one? Can you help? Thank you.

    Hi Quinty66,
    Welcome to the HP Forums!
    I see that you are having trouble editing photos, I am glad to help you with this issue.
    I would try the following steps:
    1.) Uninstall the software. Uninstalling the Printer Software.
    2.) Use the HP Printer Install Wizard for Windows, for the re-install.
    See if that installs the photo program for you, otherwise try the software on another Windows XP machine. If it works on XP and not on Windows 8.1, then that means, that is the only software available for Windows 8.1.
    Hope to hear back, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HT1338 I just purchased an iMac and an HP LaserJet M1217nfw printer.  The iMac will not recognize the disc that came with the printer.  What can I do?  This is my first Mac and just might be my last.  Installation has not been fun.  I would appreciate any

    I just purchase an iMac and an HP LaserJet M1217nfw printer.  I could not install with the installation disk that was furnished by HP.  This is my first Mac product and I'm just not sure what I'm doing...help!  I don't know if it's a mountain lion, a tiger, or a dog!  The box says OS X. I really need help.  Thanks for your time.

    What Mac operating system are you running on your iMac?
    Are you certain they're compatible?
    Have you checked with HP to see if there's a newer driver?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4 075472
    In addition, I haven't loaded on any software with my last 3 printers.  They just work without them, IMHO.
    But a current driver would be necessary.

  • My computer is not compatible with my printer??

    Moved to the Mac printing forum for better coverage.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

    Hello Hart,
    Thank you for clarifying your printers model for me!
    I would suggest checking and trying all of these steps first: Troubleshooting Print Quality Issues
    If you notice the test prints including black, then this might be a software issue, and if that's the case, try these steps on your Mac:
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Install the printer : OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    If the troubleshooting does not help at all, I would lastly suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in.
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
    All the best
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Saving animation as a GIF thats compatible with serif webplus

    this is my first ever experiment with photoshop so apologies in advanced.
    basically i have created an animation on AE, of a welder welding with sparks playing. its also on a transparent background. I have managed to learn how to render the video to get it onto photoshop, but ive reached a dead end as i dont know what to do next.
    in photoshop, I keep going to save as a GIF but it keeps saving as a picture. how do I get it working as a GIF?
    many thanks

    First it is way easier to save as a gif in AE, the render queue can select Animation Gif as an option.
    Second you need to open the animation panel {Windows>Animation} Look for a small icon in the upper right hand corner. A menu will pop up. Two things you need to do,
    1)Assuming the animation panel is in timeline mode, in that menu select Conver to frame animation
    2)In that menu you need to choose layers to Make frame from layers.
    In the animation panel Select all of the frame and change the frame rate. The first frame would have a rating, and the remainder would be set to zero, this is not what you want, you want the all of the frames to have an equal time rate for a normal animation, exceptions are stop frames, etc. You may need to experiment to get the rate just right or do a bit of math. Normal animation for TV is approx. 30 frames per second, so count the number of frame and decide on how long the animation should be and do the math. The frames in frame animation mode are in decimal for fractional seconds.

Maybe you are looking for