Is my mac compatible for Final Cut Pro?

Hi,
I was wondering if my Mac OS X is compatible for any of the final cut pro studios? It's about 5 or 6 years old. Or, does the software only work on imac computers? Is there any way I can bring my computer in and get better RAM or something to hopefully make the software work?
If not, if you could list any other really good film editing software I could use, please list it below. Thank you!!
Here are the details on my Mac computer.

There's nothing wrong with your RAM except you need more:
Maximum Memory
3.0 GB (4.0 GB can be installed, only 3.0 GB will be addressed)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
You can install up to 4 GBs - two 2 GB modules. You will find suitable modules at OWC, DataMem, or Crucial.com.
Your computer can run some version of Final Cut. Your computer is capable of running upgrades to Snow Leopard and Lion.
You can run Final Cut Pro X with Snow Leopard 10.6.8 or Lion.

Similar Messages

Anyone use a 2012 mac mini for final cut pro x?

I am considering buying a 2012 quad core mini to use for Final Cut pro X. I've looked everywhere on the web, and can't really find an answer as to whether or not this is a good idea. The main reason I'd do this over a 2011 refurbished iMac is for the USB 3.0 ports. I'm currently using a 2010 mid-level iMac, and find that I need to use proxies if I do anything multi-cam. I do know that buying the mini, thunderbolt display, and mouse/keyboard costs about as much as buying a new 27" iMac. Would the ivy bridge mini be faster than the 2011 refurbished quad core iMac for rendering and exporting, or slower because of the intel 4000 graphic chip?
Thanks

OK...here's an interesting tidbit...320M is supported by OpenCL according to The Oracle, aka Wikipedia
http://en.wikipedia.org/wiki/OpenCL
However, a look at the official Apple Snow Leopard docs suggests that they withdrew support for 320M.
http://support.apple.com/kb/SP575
Sometimes The Oracle is wrong.
Message was edited by: S. Michelle Klein-Hass to note differences between what is up on Wikipedia and the most recent version of the Apple Knowledge Base article.

Mac mini for Final Cut Pro X?

I have a MacBook and it's served me in good stead since November of 2006. It runs Final Cut Express 4.0.1 happily, and helped me get through college. However, it is a bit too weak to run Final Cut Pro X. (Quite an understatement!) I know I've got to upgrade. It's a very compelling piece of software. There is a link to the iMac on the FCPX page, so I guess it's safe to say iMac will run it. But I am also in the running to upgrade my failing CRT TV. So basically the most compelling upgrade path is a Mac mini, if I can get away with it. It will be able to use an HDTV as a monitor through the HDMI port, and I'll be able to use an existing LCD monitor as a second display for my timeline.
Help a broke wannabe recent graduate out!!! PLEASE!!! We jam econo on this ship, sailor, so I need to go with the least expensive option to move up to FCPX.

OK...here's an interesting tidbit...320M is supported by OpenCL according to The Oracle, aka Wikipedia
http://en.wikipedia.org/wiki/OpenCL
However, a look at the official Apple Snow Leopard docs suggests that they withdrew support for 320M.
http://support.apple.com/kb/SP575
Sometimes The Oracle is wrong.
Message was edited by: S. Michelle Klein-Hass to note differences between what is up on Wikipedia and the most recent version of the Apple Knowledge Base article.

Is the Canon Legria HF M56 compatible with Final Cut Pro X

I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
Thanks for your help
ConvertedAppleFan

It's not on the tested list but it may well work.
http://help.apple.com/finalcutpro/cameras/en/index.html
Why don't you download the trial and try it?

Are microsoft movie maker files compatible with final cut pro files?

I would like to know if microsoft movie maker files are compatible with Final Cut Pro?
Thanks,
elemir

depends on how you're outputting. .wmv I don't think so.That's pretty much a dead end format. mp4 might be, but i'm not sure if movie maker outputs them. .avi might be, depends on the codec used.
Avoid .wmv, apple products don't play well with that format (never have) and aim for some other output type. Then on your mac, if you don't already have it, if you don't already have it, get the free converter mpegstreamclip and see if it can convert your movie maker output into something final cut will input. DV files are good, as are .mov files.

ATY radeon x1900 not compatible with Final Cut Pro X ???

It looks like my ATY radeon x1900 Graphics card is not compatible with Final Cut Pro X and the new motion and compressor?
I have a Macpro 2 x 3Ghz quad core Intel Xeon with 16gb RAM
Any suggestion to which card I should Purchase?

There are several threads here and abroad that mention the installer will notice and approve the ATI 5770 in older mac pros.
I just now bought a 5770 from Apple's online store for my 2007 Mac Pro 2,1 so I'd have the compatibility if I ever decided to upgrade -- assuming at some point they'll run out of stock and not make any more.
Keep in mind the 5770 has 1 dual link DVI and 2 mini display ports so you might need to pick up necessary adapters depending on your monitors.
Hopefully FCPX will be usable in the near future and an upgrade will be pragmatic.
(I sure hope they don't pull this stunt with the next Logic upgrade.)
I may have a 1900XT for sale soon.

Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
Enjoy!
Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
Note: (from Quickstart Guide)
This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
2. Open up cameras.plist
3. After the 7D info add the following lines of code (keeping to the coding structure):
<key>T2i</key>
<array>
<string>Canon EOS REBEL T2i</string>
</array>
4. Save the text file. Close it. Everything should work now.
Cheerz.

Which firewire interface for Final Cut Pro on MacPro?

I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

I saw the Traveller ads in Videography mentioning
time code, so I presumed it had an advantage over
other interfaces.
I found this in some ad copy:
"""The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
For Final Cut Pro use, I'd probably shoot in HDV.
When shooting a green screen near my computer (or
maybe even on-site), I wondered if there would be an
advantage to recording the audio thru an interface
like the traveller.
The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
Do I actually need an interface that provides time
code, or is that only needed for movie work?
I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
Maybe it is simpler just to connect to the mic
directly to the camera's input?
Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion Mac OS X (10.4.8) 2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?) then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
Thanks!!

Is my 2007 MacBook compatible with Final Cut Pro X?

Is my 2007 MacBook compatible with Final Cut Pro X?

Probably not the specs call for at least 256mb of VRAM. Depending on the model your MacBook is either 144mb or 64mb of VRAM
http://www.apple.com/finalcutpro/specs/

How to put on the files of the camera Sony Avchd hdr-td10 for Final Cut Pro 6.0.6?

Sorry for my English, I am French. I would like to know if the camera Sony Avchd hdr-td10 is compatible with Final Cut Pro 6.0.6 to List and Transferer and if it is necessary to install a particular codec? This camera makes of the 3D but I specify that my rushes are in 2D. Thank you in advance.

Read this. (Also available in French from the "Aide" menu bar item)
If the files are not recognized because Sony made some changes to the AVCHD format, MPEG Streamclip (free) might be able to help. Clipwrap ($50) will definitely work.

Student Help advice! what is best iMac model for Final Cut Pro and logic pro

Hi
I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
The specs that I have on mine are..
21inch
Upgrades include
Sdd drive 512gb
Intel core i7
16gb of ram
Or
27 inch
Upgrades
Fusion drive or sdd 250gb
Intel core i7
(Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
(Ram is way to expensive so will buy from second party)
Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
My budget is £1900
My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow. Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
You are correct about the issue with the smaller fusion drives. It's one of the reasons I am not high on recommending them. Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance. The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them. I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell. For the most part I assemble my own with OWC Mercury Elite enclosures. In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives. I also have some Seagate Barracuda 7200.xx drives. They all perform excellently and reliably.
Pls. refer to my earlier post for what i recommended to you.

Plugins for Final Cut Pro X

It looks like Final Cut Pro X does not support import or export of FCXML. My company wrote a plugin that appears under the import,export menu using a Final Cut Pro provate API we had to sign an NDA for.
We now need to rewrite for Final Cut Pro X. Who can we contact to answer our questions?
ps: I'm part of both the Mac and iOS developer programs yet I don't see any forums or developer information for this...
best,
Tuviah

no it was another plugin API that I got from Apple to develop plugins such as the one by YouSendIt, or EVS, or Automated Duck which allows adding a menu item to the FCP import and export menus.
Unfortunately the Apple contacts we had 3 years ago, such as Adam Green, who gave us these APIs no longer work there or are not responding.
I've actually tried using my technical incidents to get answers but keep getting told that I need to ask the final cut pro team without so much as an email or other link.
so I'm REALLY REALLY hoping someone at Apple is monitoring this list and can help out. Or perhaps another plugin developer.
I would think Apple would want to make it easy for 3rd parties to integrate..

Change for final cut pro HD from Pinnacle Studio 10

Hello,
After lots of problems with Pinnacle Studio 10 (windoooooows.....) I finally chose to change for final cut pro HD on Mac OS 10.3.9
So far so good, I did lots of tutorials to learn but there is one very remarkable thing I really miss. Maybe there is just a thing in my configuration to fix...
Is it possible to view a part of a movie without randering it after every simple change? It must be technically possible because studio does it for years now, even with overlays.
Because I just upgraded my ibook with lots of RAM just to try out final cut for the moment, everything runs fine but rendering does take a few minutes/hours.... Well it is ok just to try out maybe I would get a macbook pro if final cut would assure me.
I feel like cutting blind!
Studio renders right before exporting, this may take a few hours but I would do this during night...
As I said, maybe its all my fault and I just have to change some configurations....
thanks for help
Fabi

Make sure your RT settings (upper left menu in the timeline) is set to UNLIMITED RT. This means that the render settings will be adjusted to play back at the best resolution they can without rendering. You might get a green render bar or orange render bar. If you get a red render bar, that means that you have a filter or two that isn't RT and requires a render, or you have too many layers to allow for RT playback.
If you simply drop a raw clip into the timeline and have to render, that means something is wrong. Your clip settings and sequence settings don't match. You need to choose an Easy Setup that matches your footage, then create a new sequence.
Shane

Keyborads for Final Cut Pro

I am looking to purchase a keyboard for final cut pro, to make it easier for me to do my editing. I have been looking at LogicKeyboards:
http://www.logickeyboard.com/shop/mac-keyboards-801c1.html
does anyone use these?
Which ones are people using?
Thanks.
side note:
Spoke with the computer store on campus [carnegie mellon university], and they are expecting FCS 3.0 this week and he told me the student price will be $299
Message was edited by: cnolan0111 - spelling corrected

One of the coolest things I have seen on those is the shuttle control (in place of the arrow keys), but you can just buy one of those separately (USB) for a fraction of the cost. And then you still have the arrow keys. I agree that if you just print out the commands and learn them that is pretty much the same as paying a bunch of money for a keyboard that does the same thing. Pretty unnecessary.

Is my mac compatible for Final Cut Pro?

Similar Messages

Maybe you are looking for