Is my macbook compatible with 64bit windows 7?

I have an authentic win7 professional 64 bit install disc and a snow leopard installation disc.
Now i want to use boot camp to install windows 7 but im not sure if my macbook is compatible with 64 bit
Yes ORIGINAL macbook, all white.
here are my specs
- 2GB Ram 667 MHz DDR2 SDRAM
- Snow Leopard 10.6.8
- 2.4 GHz intel core 2 duo processor
Thanks.

Check this article: http://support.apple.com/kb/HT5634

Similar Messages

  • Adobe is not Compatible with Vista? or not compatible with 64bit Vista?

    From reading through some of the threads here, I am still a
    bit confused. Is Captivate 4 not compatible with Windows Vista at
    all? Or just not supposedly compatible with 64bit Vista?
    Has anyone tried to do a software simulation recording of the
    start button, or start menu, or any control panel windows? It
    doesn't register a click at all! It will not record a frame!
    This is rediculous Adobe. You had, what... 2 years almost? to
    develop Captivate 4? And you can't even make it Vista compaitble?
    I suppose you'll drop Captivate 5 in 6 months and make
    everyone pay $400 for an upgrade just so they can record anything
    in Vista? This had better be a high priority update. As it stands
    right now, I have to do full motion recording. If I want to do
    that, I will use Camtasia!!!
    Please give me an answer or a workaround.... Someone..
    Anyone.
    I am using 64bit and it works fine if recording within an IE
    window. All editing, recording, etc functions work fine. I have
    tried to do this on a 32 bit version as well with no luck
    (recording start menu / button/ control panel windows/etc)
    Thank you.

    > The problem somehow lies in the system windows. I always
    run captivate "as
    > administrator". As soon as a system window is up (IE -
    "control panel"
    > "display
    > properties" "computer properties" etc) it will fail to
    record a capture
    > upon
    > mouse click. Same with the start menu and taskbar.
    >
    > Test for yourself. This used to work in WIndows XP..
    What changed??
    >
    Captivate 3 and 4 work fine on 32-bit Vista. Neither is fully
    compatible
    with 64-bit Vista, so far as I know, but you should be able
    to get results
    by running in 32-bit compatibility mode.
    Steve
    http://twitter.com/Stevehoward999
    Adobe Community Expert: eLearning, Mobile and Devices
    European eLearning Summit - EeLS
    Adobe-sponsored eLearning conference.
    http://www.elearningsummit.eu

  • Is DSC Citadel compatible with the Windows 7 disk defragmentation utility?

    Is DSC Citadel compatible with the Windows 7 disk defragmentation utility? I'm seeing gaps in trace data, and noticed Win7's defrag utility was scheduled to run weekly (default setting for Win7). I didn't see such gaps when running DSC 8.6 on XP.
    - Andrew

    Hello andrew johnson,
    Based on your description the Windows 7 disk defragmentation utility may be limiting write operations to the Citadel database. Does your current setup defragment part of your hard drive on a weekly basis? In order to get more information regarding this issue, you could turn of this utility in order to isolate where the gaps in trace data are occurring.
    Paul-B
    Applications Engineer
    National Instruments

  • Is my 2007 MacBook compatible with Final Cut Pro X?

    Is my 2007 MacBook compatible with Final Cut Pro X?

    Probably not the specs call for at least 256mb of VRAM. Depending on the model your MacBook is either 144mb or 64mb of VRAM
    http://www.apple.com/finalcutpro/specs/

  • Dv6 1361sb with 64bit Windows 7 wont boot even with recovery CD

    Our HP dv61361sb with 64bit Windows 7 laptop died.  I can't get it to boot past the Windows 4 color flag...goes to a graduated blue screen and stops, or if I use the boot recovery discs I just ordered for it, it stops at a graduated grey screen and won't go any further if I force it to boot from the CD by hitting escape on boot..  I ran boot tests on the hard drive and memory, and all check out 100% OK.  Looked on HPs help site and it just says to insert the recovery disc and follow the on-screen instructions...can't get that far.  Any ideas?

    Do you have another hard drive that you can try?

  • Is MacBook compatible with Thunderbolt?

    Is MacBook compatible with thunderbolt?

    All MacBook Pros made after February 2011 have Thunderbolt but the question was about MacBooks not MacBook Pros. MacBooks were discontinued before the Thunderbolt interface was developed. http://en.wikipedia.org/wiki/Thunderbolt_%28interface%29

  • Is the macbook compatible with PC's programs and documents and etc?

    I am switching from a PC to a macbook very soon, and my mom is worried that I will have this macbook and if I'm in a project or something with someone who has a PC, and i need something to be switched from my computer to theirs, or vice versa, that it won't work.

    yeah MS Office for mac is compatible with all word, powerpoint and excel files. As for programs no they're not, but Im sure you could find the same program or a look a like for the mac. If you could be more specific with your "programs" and "documents" that would be awesome.

  • HP Photosmart Premium c309g wireless network printing problem with 64bit Windows 7

    A problem exists where the c309g is installed on a wireless network where one of the PCs on the network is running 64bit Windows 7.  Amongst other things, the printer may print very slowly, appear disconnected or unavailable through the HP Solutions Centre and may not be pingable from any of the PCs on the network.  The problem will affect ALL the PCs on the network !
     Network monitoring software will also show an enormous level of network traffic between the printer and the Windows 7 PC.  As soon as the Windows 7 PC is switched off, everything returns to normal. 
    The problem is solved by disabling the HP Network Devices Support Service on the Windows 7 PC as follows;
    Run services.msc from the Run command on the Windows 7 PC.  This will display the list of all the local services running on the PC together with Description, Status and Startup Type information for  each.
    Scroll down the list until you see the HP Network Devices Support Service.
    Right click on it and select Properties to bring up the Properties window.
    Use the dropdown list to Change the Startup Type to Disabled.
    Once disabled, the printer will start to work normally.  HP are aware of this problem which may be unique to the 64bit version of Windows 7.

    Thanks but no luck... I tried it..... Got back from son's baseball game.. checked on printer - as in tried to have printer print something... nothing...   prior to going out I went ahead and deleted the 6  c309 print devices and reinstalled a new one and got the printer to work...  after the game it was back to ignoring print commands...  When I go to printers there again are 6 print devices for this printer - one titled HP Photsmart Premium C309 g-m... then 4 copies of that and then one version titled HP0AC58C (HP Photosmart Premium C309g-m).
    As I just finished writting that... the printer came alive and started printing some previous jobs... so maybe it helped - not sure but what about the 6 versions of print devices?   I just checked the statuses of all the versions and the default is offline... the various copies have different amounts in que but have a pending status of pending deletion...  When I tried to make one of the other copies the default printer - it errors out with  0x00000709

  • How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

    Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

    Acius wrote:
    Crjohnson, I think you can really help me!
    Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
    I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
    What is crossover? Is it another wine app?
    Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
    What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
    As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
    You probably cannot afford to buy Crossover either.  It is designed for user friendliness though, but of course Wine cannot run everything.
    Yes you have to learn some things to use Wineskin.  Normally on Gecko and Mono prompt, just cancel them.  Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it).  Mono is a replacement for .NET if your program requires that.  You do not want to install them if you don't need them as they will just waste space.  You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
    You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
    An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
    If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
    Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go.  Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
    There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
    If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

  • Will Photoshop/Premier Elements 13 be compatible with a windows 10 upgrade?

    I just purchased Photoshop/Premier Elements 13 with Windows 8.1 64 bit installed on a Dell XPS 8700 and intend to take advantage of the free Microsoft upgrade to Windows 10 when it is available.  Will this bundle be compatible or did I just waste the cost for only a few months worth of usage?

    markc
    What computer operating system is your Premiere Elements 13/13.1 running on?
    Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
    for the Contact Sheet.
    Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
    If you used Edit Menu/Add Caption beforehand, I can see how you can get
    Date
    Caption
    Filename
    under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
    where you are going to get a title for each of the contact sheets.
    Any questions or need clarification, please do not hesitate to ask.
    You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
    at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
    Please let us know if we have targeted your quesiton..
    Thank you.
    ATR

  • Using Disk Utility to burn cd's but not compatible with PC Windows

    I'm using disk utility to back up files/photos. I use disk utility because I need to append the cd with multiple burning sessions. My problem is that the burned disc will not read in Windows PC environment.
    Any ideas?
    Thanks

    You are correct. Discs burned with Disk Utility (single or multi-session) are not Windows compatible.
    The only way to burn Windows compatible discs with OS X is via the Finder.
    Other utilities, like Toast, will easily make Windows compatible discs.

  • Burning CD's compatible with old Windows 98

    I have discovered an issue when burning html files to CD. When inserted in a Windows 98 machine, the html files are readable, but formatted incorrectly. Have tried burning from both my iMac and Macbook both running 10.5.5 with same results. If the same files are attached to an email and then read on the Windows computer, the html format is correct, so it must have something to do with the CD burning process. I need the compatibility with old computers as many recipients are using old hardware. Any suggestions?

    okay, folks with the 2380s on 64-bit versions of Windows (it can hit both XP and Vista) generally get relief from the 2380s by reinstalling the 64-bit versions of the GEAR drivers that iTunes uses for importing and burning.
    here's a link through to the GEAR drivers:
    GEAR drivers
    note that there are two different versions of the 64-bit GEAR drivers. be sure to get the one that matches your hardware.

  • Pages 08 on macbook compatible with 09 on iPad?

    I have pages 08 on my macbook and 09 on my iPad. I modified an 08 created file on my ipad now it won't open on the macbook (pages08). why not?

    The Mac App Store & the iTunes App Store are two different things. The two different Pages applications are sold separately, one in each store.
    If you don't have Pages '09 installed from the Mac App Store it should not appear as installed. From these screenshots you can see that I have three versions of Pages installed & the Mac App Store still shows a price for Pages (meaning I can purchase it). There is something definitely amiss with your Mac & it may need a trip to the Apple Store to have a genius look at it.

  • My dreamweaver  2 websote is not compatible with my windows 7 computer.

    I am ulnable to make changes to mhy website becauseit was designed usilng dreamweaver  2. and my new computer has windows 7 .My old computer had windows xp but that computer no longer works.. I had no problem accessing dreamweaver 2 with windows xp
    Every solution that I have heard about  is very expensive or very  hard to do.
    So far, the solutions that have heard about  are:
    1. hire someone to redesign my entire website using  a  much later edition of dreamweaver
    2. take windows xp off my old computer  and install it on my new computer
    3. Buy a widows xp  cd and install it on my new computer
    3. Buy a windows xp computer and use it instead of my windows 7 computer
    4 buy a windows xp computer and hook it and my windows 7 computer to the same monitor. The suggested techniques for doing this involve any of the following:
           A. get a vga signal splitter and reverse it using gender changer. or
          B.Best Buy suggested using a  KVM switch
    I am non-technical and will have to hire all of this to be done. Cost is very important.

    There are 2 things you could try.
    The first (which is unlikely to work, but simple) is to try running Dreamweaver in "compatIbility mode". To do this, right click the shortcut to Dreamweaver, select 'Properties' and then on one of the tabs (I forget which) there should be the option "Run this program in compatibility mode for". Select Windows XP (doesn't matter which SP you choose) and then try starting it again.
    The second thing you can do is use the new Windows 7 XP Mode. Basically this runs a virtual XP machine and gives you a (free) copy of Windows XP within Windows 7. You can get this from Microsoft here:
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    Once that is installed, install Dreamweaver on the XP it loads on your computer.
    If either of these solutions aren't to your liking then either get a new Dreamweaver (which should have no problem reading your old site) or, as this is considerably expensive, consider an open source alternative (open source being free).
    There are many alternatives available, Google "Dreamweaver open source alternative" for a selection, but one I've liked in the past is Bluefish:
    http://bluefish.openoffice.nl/index.html
    Although these options don't match the features of current versions of Dreamweaver, they are probably quite comparable to Dreamweaver 2 and most likely greatly surpass it (unless of course you're meaning Dreamweaver CS2).

  • I recently tried to upgrade my itunes on my dell laptop with 64bit Windows 7 and it stopped working completely. So I tried deleting and installing all over again and haven't been able to reinstall it since. I've tried numerous things i've read in forums

    I recently tried to upgrade my itunes on my dell laptop with 64 bit windows 7. It stopped working so I deleted all files and tried to reinstall and haven't been able to since. I've tried numerous things i've read in forums and nothing seems to work. The installation will not move past the "publishing product information" point. After being stuck there for a while this error message appears:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="x86"', Please refer to Help and Support for more information. HRESULT: 0x800736FD
    I hope someone is able to help me with this.

    Did you already try what bnoir suggested in this post about error 0x800736FD:
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?
    This thread might help as well, suggestion provided by bnoir:
    In general, these ones tend to be caused by underlying problems on the PC that can prevent Windows Updates from installing. So my main strategy with them is to try to fix the Windows Update issues. If we can get Windows Updates flowing again, that generally clears up the iTunes install errors +en passant.+
    Head into your Windows Update, and check for any new updates. Do any fail? If so, open your Update History and doubleclick on the failure entries to bring up a small box with alphanumeric error message codes. Are you getting 8000FFFFs? (They often seem to be associated with an iTunes-install 0x800736FD.)
    If you're getting 8000FFFFs, try the following Microsoft document:
    [Windows Update Error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
    Head back to Windows Update, and stock up on any updates you're behind on. Once you're completely up to date in that regard, try another iTunes install. Does it go through properly this time?
    Message was edited by: Ingo2711

Maybe you are looking for