Is my macbook pro a1226 (2008) compatible with osx mountain lion?
Hi all, just need to know if my a1226 2gb ram, 2.2ghz processor is able to work with / is compatible with mountain lion?
All help is appreciated! thanks!
see if your macbook falls in this category.
http://www.apple.com/ca/osx/specs/
good luck......
Similar Messages
-
Macbook pro late 2008 update to osx mountain lion already but can't open safari
macbook pro late 2008 update to osx mountain lion already but can't open safari
Where did you buy this "open box" MacBook Pro?
Here are the specifics on the upgrade program:
http://www.apple.com/osx/uptodate/ -
Can somebody please advise urgently...
I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
Can somebosy please help me urgently??!!!Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
BR Pete -
Is Microsoft Office Mac 2011 compatible with OSX Mountain Lion 10.8
Is Microsoft Office Mac 2011 compatible with OSX Mountain Lion (10.8)?
Yes, it works, but make sure you've updated your Office 2011 to the latest version.
-
Is Final Cut Studio version 3 compatible with OSX Mountain Lion?
Is Final Cut Studio version 3 compatible with OSX Mountain Lion?
Do a search on this forum, there are numerous ones, some with issues some without.
DM -
Macbook pro slow internet after upgrade osx mountain lion
Slow safari after upgrade to osx moutain lion.
Have you reset Safari? Yet? Top left corner of the screen next to the apple logo click on the word Safari, then click reset safari, make sure everything is checked then click reset. Also try:
Repair your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue. -
Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?
Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks
If your computer does not have Thunderbolt you cannot use a Thunderbolt display. There are no adapters that will help.
-
MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite
All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum -
can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market
Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
Java is vulnerable… Again?!
http://java-0day.com -
I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.
Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac). -
HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.
Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.
Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.
-
My macbook pro is very slow after installing mountain lion
my macbook pro is very slow after installing mountain lion? Is anyone else having this issue?
If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD -
My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed
Hello Harrisonhcue,
I would be concerned too if I was getting the message "no hardware installed" when trying to use Wi-Fi on my MacBook Pro. For a message like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm running 10.5.8 on my MacBook Pro. Can I upgrade to Mountain Lion.
I'm running 10.5.8 on my MacBook Pro. Can I upgrade to Mountain Lion. Thanks
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...
Next...
Upgrade to Mountain Lion
With Regard to ML... Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com -
Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.
FaceTime for Mac: Troubleshooting FaceTime
Maybe you are looking for
-
I have a Mac Pro using Lion, with SSD for system drive. Drive stopped booting, but otherwise appeared healthy. Restored from system backup. Now drive seems to work properly, BUT my logon password no longer works. Password OK for account; can acce
-
Can't make static reference to method while it is static
Hello, can somebody please help me with my problem. I created a jsp page wich includes a .java file I wrote. In this JSP I called a method in the class I created. It worked but when I made the method static and adjusted the calling of the method it s
-
Error message failed "ALIGNMENT" after changing black cart on 7360 no black print.
I have an issue with black print on my 7360, I installed a new black cartridge, ink level monitor displays full. printed test page no black print and have" failed alignment" message after running this test. Tried to run clean" print head" same resul
-
Hello Frnds, I have a solution Manager installed on a physical server with CI and DB on the same host. [ Windows] Now we are planning to separate the DB to a new host [Linux]. The DB instance has been created on that host. So in order for it to start
-
What type of data we can send using http POST method apart from text(string) ? Is it possible to send some video or file or image through http POST method ?