Is my macbook pro made for leopard or tiger?

i have the intel core duo....and i tried leopard and it was pretty unstable.....i'd rather have a more stable OS that one that has a little more features. by technical specs, which os is my computer made for? thanks

Since G4s of 867 Mhz or greater, and G5s are also compatible with Leopard, this suggests something about how you installed Leopard was the problem and not that your machine is not built-in for Leopard. My FAQ* explains how to prevent upgrade failure:
http://www.macmaps.com/upgradefaq.html
If it should still prove unusable to you, it is possible you just have some set of applications that aren't properly designed for Leopard. But your machine should work just fine with Leopard.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Similar Messages

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
Not sure where these hard disk folders are located that you are referring to? Finder, Finder tool bar, Finder side bar, Desktop, Dock?
More then likely they are an alias that not longer point to the orginals, thus the question mark.
I would reboot. Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

Which final cut is best for macbook pro with snow leopard?

which final cut is best for macbook pro with snow leopard?

Probably FCP 7 which is part of Final Cut Studio 3.

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

I have a new l7 macbook pro running snow leopard. When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen. Then I have to physically shut down and try again. At that point it will load correctly. Any help?

I have a new l7 Macbook Pro running snow leopard. When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times). I finally downloaded the bootcamp windows support to a flash. I inserted that and finally got it installed. Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up. If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up. That will generally let me boot into windows for the remaining of the day. The next day, the same thing happens again. I have tried reinstalling several times, and the same thing keeps happening. It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro. Anyone know how to fix this?

I own HDM 2011. But they have products that aren't listed or hard to find too.
Recommending Pro version for one user's needs:
http://www.wilderssecurity.com/showthread.php?t=297756
Pro vs HDM 2011 feature comparison
http://www.paragon-software.com/home/hdm-personal/comparison.html
Forum topics:
http://www.wilderssecurity.com/showthread.php?t=297756
http://www.wilderssecurity.com/showthread.php?t=303155

Recently updated m old 2004 macbook pro to snow leopard 10.6.8, I opened a word doc. and it automatically opened in iwork '08? Now I can not print old or new docs? Help - do I have to update to iwork? Is this an update or do I have to buy iwork?Thanks

I have a couple of questions? 1. I recently updated my old '04 macbook pro to snow leopard 10.6.8, when I went to open an old word doc., it opened with iwork and will not allow me to print until I update to iwork'08. Do I have to update? If I do, is this an update or do I have to purchase iwork? 2. Can I update my old '04 macbook pro to Lion or Mountain Lion or is this too much? I just purchased and iphone 5 but do not know if Snow Leopard can give me the future updates I might need?? Also does icloud work with Snow Leopard? Thanks for help, I am lost...

Try resetting your SMC and NVRAM before attempting to install again.
Resetting the NVRAM/PRAM
Note: This will not delete any data.
The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Turn on the computer by pressing the Power Button.
On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
Release the keys on the built-in keyboard.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard!

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Is it possible to go back in time with Time Machine and reinstall Snow Leopard. Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

MacBook and MacBook Pro competing for airwaves

Howdy,
I have an Airport Extreme set up as wireless router, i.e., the cable modem is plugged into the Extreme. Elsewhere in the house, an Airport Express is set up to extend the network. We have both a MacBook and a MacBook Pro, both running Leopard. When both laptops are accessing the web, it seems as though they were competing for the connection because the MacBook systematically gets slower connections, lags, and sometimes gets disconnected entirely.
Following some advice I found elsewhere in these forums, I downgraded the firmware of the Airport Extreme to 7.3.1. Here are its main settings:
- participate in a WDS network
- radio mode: 802.11n (b/g compatible)
- channel 11
- security: WPA/WPA2 Personal
- DHCP server distributes addresses between 10.0.1.2 and 10.0.1.200
Both the Extreme and the Express use the same channel. I tried changing it with no success.
Upgrading the firmware does not resolve the issue. The MacBook Pro is never disconnected; it always comes ahead of the MacBook. The two laptops are not dealt the same IP address, but somehow, there is a competition. When the MacBook Pro is turned off, say, and not accessing the web or anything else, the MacBook does not get disconnected.
Has anyone seen such a situation before? I might have misconfigured something.
Thank you in advance for any suggestions.
Dom

In a WDS setup, everyone uses the same channel (in your case 11).
If you can run an ethernet cable from the Airport Extreme to the Airport Express you can eliminate the WDS mode and instead configure your 2 base stations for WiFi Roaming, and you can put the Airport Express on a different channel (eg. Ch1).
The Airport Express gets its connection to the router via ethernet. The Express is configured into "Bridge Mode". The Express is given the exact same SSID as the Extreme. The Express is given the exact same password as the Extreme. The Express is set to a different channel (Channel 1 would be a good choice, unless your neighbors are using that, in which case you want to be at least 5 channels away from your Extreme and any neighboring base stations with strong signals).
This will give you a Roaming setup where as your move around the house, your MacBook and MacBook Pro will automatically switch between the strongest base station, but because everyone is using the same SSID and Password, you do not loose your connections.
And each base station is using its own channel.
If you do have neighbors with strong signals, you can use something like "AP Grapher", iStumbler, KisMac, MacStumbler, etc... to see your neighbors, the chanels they are using, and the relative WiFi signal strength so you can choose the channels with the least interference.
If you can not run an ethernet cable between the Extreme and the Express, but you really like the idea of a Roaming network, then you could look into PowerLine ethernet adaptors for getting an ethernet equivalent between the 2 base stations.

What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard?

What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard? Does it slow down my Mac? Seems like someting has slowed down my Downloads, Updates, Backups, etc. & I don't know how to locate the source or how to fix. Any Wizards avail to share some Wisdom? I am using Ethernet Cable/Port for Internet Connection, I Use a Seagate FreeAgent Go Flex Ultra-Portable Drive w/ Seagate's Firewire Adapter Cable.

If this is really Memeo Backup and you want to get rid of it for a better backup program like Carbon Copy Cloner the the following shows all the stuff that Memeo Backup installer installs (based on Memeo Backup 2.5.141 which I found with a google search and downloaded):
The primary file to disable Memeo Backup would be that file in LaunchDaemons. Remove it and reboot and the rest is just taking up disk space.

Best Macbook Pro 15" for photo editing?

Hi,
I have to get a MacBook Pro 15" for my work. I'm a photographer, so I will be editing a lot of images with Photoshop, Aperture, plug-ins, etc. + I will connect a large external monitor to it.
I will also have to edit some videos in FCP but not much, and recording some audio using Logic.
My two choices are: MacBook Pro 2.4 GHz (i5) or 2.66 GHz (i7). From what I understood the 2.53 GHz (i5) is not really worthed, since there is almost no difference with the 2.4 GHz.
I was wondering if in your opinion the better graphics of the 2.66 GHz could make a big difference to me.
I don't play any games on my mac.
Thank you so much for your advises
Have a good day
Luca

I think you will find the only difference with the Nvidia graphic card between the i5 and i7 is the i5 have 256mb less dedicate vedio RAM than the i7 model. This mades no difference for the tasks you listed.
Both i5 and i7 can display resolution upto 2560 X 1600, so you can connect it to a 30 inch monitor without any problem.
I agree with you the 2.4Ghz model is a good choice, you can use the rest of the money for 6 to 8Gb of RAM upgrade.
The i7 in my MBP only get pushed to the limit when I test software in multiple vitural windows. Most time incl working in Photoshop CS4 in virtual Windows 7, the cpu only operate around 30%. So I don’t think you will notice any performance difference with the 2.4Ghz model.

Windows 7 computer, and my macbook pro on snow leopard don't see each other?

My windows 7 computer, and my macbook pro on snow leopard don't see each other. I have configured the windows section under the network prefrences with the required information, and still no luck. Does anyone have any sugestions for me?

Shouldn't they see each other and let me use each of their files?
Please pardon the obvious here, but have you checked to make sure that you have enabled the File Sharing option on both computers? You may have already done this, but your post did not mention this, so we can only go with the info that we have.
If you have not enabled File Sharing, I can't help on Windows, but on your Mac...
Open System Preferences (gear icon on the dock)
Open Sharing
Enter a check mark next to File Sharing
I imagine that there is a similar setting for the Windows machine
It would be a good idea to power cycle your entire network as well to make sure that the network is sequenced correctly. Power everything down, order is not important.
Start your modem first and let it run a moment by itself
Then start your main router the same way
Continue starting each device the same way until everything is powered back up

Macbook pro and snow leopard

I want to update my 2.2 15" macbook pro to Snow leopard, and then to lion, but I am a little aprehensive because of some postings I have seen about the upgrade causing macbook pro's to overheat. Is there any truth to this?
Thanks

Below are the specs for Snow Leopard:
*General requirements*
Mac computer with an Intel processor
1GB of memory
5GB of free disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.

Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8. I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it. Thanks for your help.

Thanks so much for your help, Michael. Glad to hear it works for you. This gives me enough confidence to go ahead and order the App. Thanks again.

Macbook Pro with Snow Leopard, Win 7 & Ubuntu, can't upgrade to Lion

I have new 13" macbook pro with Snow Leopard on it. With a combination of boot camp and some disc partitioning trickery, I got windows 7 and ubuntu on it as well. Furthermore I also have a shared data (fat32) partition on the machine (so 4 main partitions - win,mac,linux,shared - plus swap partition, efi, etc).
I just download Lion and I'm trying to start the installer, but when it asks me which partition I want to install it on, all options are greyed out and the Macintosh HD partition says somethign to the effect of "this disc cannot be used to start the computer". Is there any way for me to get lion installed without having to erase all my extra partitions and start this whole agonizing process over again?

You may be out of luck without formatting your HDD. See this article from Macworld:
(At least Recovery HD should be created. In our testing, it appears this special partition is created only when you install Lion onto an internal drive formatted with a GUID partition scheme. In addition, that internal drive must initially have only a single partition; or be a multi-partition drive that was partitioned by Boot Camp Assistant and not further modified afterwards. So not everyone will get this useful feature. Apple has confirmed some of these restrictions.)
Also, see these Apple KB articles:
http://support.apple.com/kb/HT4649
http://support.apple.com/kb/ts1600

Is my macbook pro made for leopard or tiger?

Similar Messages

Maybe you are looking for