Is my Macbook Pro the only one with lousy wireless reception/coverage

Hi,
I was expecting great things when i received my Macbook Pro last week. I was also prepared to go through a lot of testing for sound issues and heat, as i've read from so many other posts (my MBP seem to have none of these issues in any major way).
I used to work on my Powerbook G4 from 2005 which had a decent wireless reception (even compared to my wife's ibook G4).
But this macbook has the worst wireless reception i've ever seen! When running istumbler on both machines (PB, and MBP) and placing them side-by-side i'm getting a major difference in signal strength.
This is also basically what i see everywhere else with this MBP.
At the same time the MBP has problems connecting to Closed networks (airport extreme AP) and apparantly also lots of other wireless issues with authentication.
Am i the only experiencing this ?
Best Regards,
Lasse,
MBP 2.16, Powerbook G4, Ibook G4, Ibook G3   Mac OS X (10.4.6)  
Powerbook G4, Tiger   Mac OS X (10.4.2)  

I'm curious, when did you get your MBP and what is the serial number of your MBP?
Thanks
i read early on that with the new antenna placement
and whatnot that the macbook pro was going to get far
better reception than the older powerbooks. this may
be true, because i've seen some powerbooks get bad
wireless reception, but my macbook pro gets about the
same reception as my iBook G4. which is pretty good,
so i'm not complaining ... i just think the "better
wireless reception" was overhyped. as far as
connection issues and dropping connections, etc.,
i've had no problems so far, and i regularly use my
MBP in 5 different open and closed wireless networks
with different levels of security.

Similar Messages

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  Any ideas what is causing this?

    I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem.  I have used this account for years.  Any ideas what is causing this?

    No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well.  That will tell you if it is something wrong with your main User, or something wrong with MBP.
    Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
    Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library....   Hard way to get it to work, but just my idea.

  • Dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?

    dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my account keeps popping up on his phone. How can we change the ID on his phone?

    When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free.  Any help you could offer would be great (-:

    All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

  • Am I the only one with these various problems...??

    Hi all,
    I start my first post and introduction ever on this forum with a imposing problem with Aperture 3.03
    I just did the upgrade to Aperture 3 & 3.03. Coming off Aperture 2, I was able to rotate, crop and do all the things I wanted by just placing the pointer while clicking, holding, and moving all at the same time with no issues. With Aperture 3.03, no such luck. I've noticed that now if I want to rotate an image or even crop an image the first effort to move anything is ignored. It shows all the signs of being ready to move something, but nothing happens, nothing moves on first try. If I stop the click and place click the second time it is responsive as usual....What gives???
    Here is another issue. Cropping is all over the place and never right on the first try. Even if I have a set aspect ratio it does not provide me with the one I selected. I'm always getting the wrong aspect ratio even though the right one is selected. If I pick "Master Aspect Ratio", I get a variable ratio instead of a fixed ratio??? If I click again it changes again. This program is not stable!!
    One other thing has anyone noticed that you cannot use the arrow keys to move from one picture to another after editing the photo?? It is happening to me. If I complete an edit and want to move to the next photo, the program will not respond to key commands in any way. I'm forced to return to Browser mode and even then it seems hit or miss whether is responds to key commands again. navigating seems to be a big impediment when actively editing.
    So, am I the only one with these problems???
    Lets hear your story...
    Note: just installed the newest stability update for Snow Leopard/Aperture 3 just made available on August 18, 2010. No change...
    Steve,
    Bethlehem, Pa.
    Message was edited by: hdskullfire2

    I don't see any of these issues! You have listed several, disconnected issues. Perhaps you should pick one of them, and give us a blow-by-blow of your action steps.
    For rotation, click that button at the bottom of the View window, and then use one of the [ or ] bracket keys as listed for direction.
    Ernie

  • Am I the only one with a dispatch date 19th July?

    I did order on 19th June anyone else waiting this long?

    I went to the Apple Store on launch day and bought my iPhone 4. No reservation, just went in and bought it. Much easier than pre-ordering. Enjoy the iPhone when you get it. iPhone 4 is excellent.
    Oh to answer your question, it's unlikely you are the only one with a specific date. If Apple were allocating one iPhone per pre order per day, the backlog would take until iPhone 26 to get through.

  • When actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

    when actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

         Hi Michael! Thanks for the reply
         I live in Norway, and the phone has been either provided by a Norwegian carrier, or bought unlocked from the Norwegian Apple Store. You can check yourself by going to Settings-General-About-Model and type the model number (MC133KN in my case) here: http://iphonefrom.com/en/MC133KN  But it`s unlocked, I placed a Lebara SIM in it and it works perfectly.
         If it has been carrier-locked then most(if not all) Norwegian carriers are selling the phones on a 12 months subscription contract. When the 12 months are up, the phone is being unlocked by the carrier either automatically, or upon customer`s request(depends which carrier you use).
         It`s good to hear that your 3GS works well with the iOS 6, still after having read about issues after upgrade I have a feel that the upgrade to iOS 6 may be a hit or miss.
         I read on a forum that early iPhones can only support 3 major upgrades. Can that be true?

  • Am I the only one with the mysterious black box?

    If more than one AA window is open (9.4.2, Win7)  and I try to draw with a polygon or other graphic tool, a black rectangle begins tracking my cursor, obscurring the graphic line I am trying to create. It grows to the scale of the polygon, etc., but disappears as soon as I stop drawing and the shape becomes inactive.  If more than one window has been opened anytime during a session, and I want to draw, I have to close the program and reboot in order to not have the problem. 

    Hi there,
    The good news is that M-Audio have just released a new set of drivers. Check out the following support article:
    http://www.m-audio.com/index.php?do=support.faq&ID=36be2fb74b90752fe3568b07c20a2 189
    While this relates specifically to Leopard, perhaps you were falling foul of some driver issue.
    Time to try updating your existing drivers and let us know. By the way, no, you were FAR from the only person with this problem. M-Audio have been very slow in getting drivers out. Let's hope this is now a thing of the past.
    Pete

  • Volume : Am I the only one with issues hearing calls

    Ok, I am about 75% done with my activation I can place calls just not receive them. So far I love the iPhone, other than activation (Not Apples fault). However I have a big problem hearing calls (Apples fault). Am I the only one having this problem?
    Apple please get us an update out soon that will fix this problem. There is no way this phone can work for me if I cant hear calls. I will be forced to return the phone and go back to my Razr. Other than this issue (and it is a big one) I love the phone

    NO! I thought that it was because i turned 30 this year! This *****! really bad! i love the iphone but i am totally gunna be FORCED! to return it if there is not a solution to this problem ASAP! ive noticed that talking to a person on a land line is the louder between talking to anyone on another mobile but still not load enough! THE ONLY WAY I CAN USE THIS PHONE FOR ANY KIND OF CONVERSATION IS WITH THE STEREO HEADSET IN BOTH EARS! hense cutting out any backgroud noise! Apparently there is no problem on the other end! everyone has said they can hear me fine! As far as the speaker! ridiculouse! i will nnot even attemt it unless im in a closed room! forget about using it in your car! you will hear a wisper!

  • Am i the only one with a HDMI adapter no longer working ?

    Hi. I own an Iphone 4 running ios 5.1.1. I used to be able to watch a video using my HDMI adapter when i was running ios 5.0.
    But i recently wanted to use it and i saw it would not work at all !!! I was running ios 5.0.1. Then i thought i should update my iphone to make it work again, but in vain, my adapter seems to work no more... I of course tried to restore my iphone and checked my hdmi cable. Am i the only one or am i the choosen one like neo ? Thank you !

    first of all
    apple don't read or write here so they will never "say anythign" here or read your posts
    this is a user helping user forum only
    you can get their ear using the feedback
    http://www.apple.com/feedback/
    don't own the hdmi adapter but got the component and composite ones and they work fine with my iphone4 with latests os
    what I would do if I was me
    first step of troubleshooting would be to reboot the phone
    http://www.apple.com/support/iphone/assistant/phone/#section_1
    second step then I would try another ios device that is supported with the device (of cause only iphone4s and ipad2 and up support mirror so for testing I use youtube as I know that support the tv out feature)
    trying out the other ios device would rule out that the cable is damaged and you just happend to notice around the time you updated os
    third step I would try other devices that use the pin30 cable to see if the connector in the iphone was damaged

  • What is the best MIDI controller for Logic, and is Axiom Pro the only line with "Hyper Control?

    What is the best MIDI keyboard/control surface to use with LOGIC (Studio - which I assume is the latest & greatest version) and is Axiom Pro the only line that has Hyper control? I already own the Axiom Pro 61, but prefer more keys, and though I like much about it, the keys aren't very easy for playing more complex material, and there is an obvious delay regarding attack response (esp. noticeable at faster speeds). There are other issues as well I've read of regarding key sticking (though I consider myself lucky mine do not, there is nontheless a sluggish clunckiness issue which neither helps agility/acuracy nor the delay factor.) and the unit not lasting very long before it breaks and needs repairing. And lastly, I am no fan of Avid and care not to support them in the least.

    Sorry, but is this an iPad question? Axiom Pro 61 is not an iPad-compatible peripheral, so perhaps you mean to post in the Logic forum?

  • Am I the only one with no problems with the froyo 2.2 update

    I did my update on 4/20 bout 10:30pm ny time it took bout 10 min to dl and bout 10 min for the install and what not, after that I updated my flash to 10.2 and tried out my new features, was amazed how fast it was like my phone was on redbull, everything is good battery life is bout the same if not better, not having issues like I been reading, so am I the only one, who else out there had no problems updating and no issues with it

    I updated my phone to 2.2. Almost everything seems fine. I now have Flash and it made some small improvements in a lot of features such as E-mail viewing is a bit nicer and web viewing is a bit better. Some background colors have changed. The phone seems to run apps a bit faster or improved in minor ways. The GPS Google Maps stuff works well as before. It did reset my phone personalization presets like my homescreen, a minor thing. One game app stopped working but I deleted and reinstalled it and it works fine. I kept all my music, contact list and data on the phone. Nothing lost. All in all I am very satisfied with the update and pleased. Thanks Verizon and Samsung, now please get to work on Gingerbread 2.3.

  • Why isn'y home sharing working? Am I the only one with this problem...

    I've watched about 12 youtube tutorials on how to use home sharing and none of them are working. ive redownloaded itunes and its still not working.
    what's going on !?
    Help!!!!

    Hi there,
    The good news is that M-Audio have just released a new set of drivers. Check out the following support article:
    http://www.m-audio.com/index.php?do=support.faq&ID=36be2fb74b90752fe3568b07c20a2 189
    While this relates specifically to Leopard, perhaps you were falling foul of some driver issue.
    Time to try updating your existing drivers and let us know. By the way, no, you were FAR from the only person with this problem. M-Audio have been very slow in getting drivers out. Let's hope this is now a thing of the past.
    Pete

  • Am I the only one with a Perfect Macbook pro??

    ok, so i had kernal panics, opted for a repair instead of a replacement. got it back three days after i sent it out. They replaced the logic board and its been rock solid ever since. I get no whine at any time, no matter how small. It constantly runs at about 95 degree F, my screen is bright and amazing, and BOTH speakers have clear, crisp sound. My battery runs at about 3 1/2 to 4 1/2 hours on everage, and it always wakes up from sleep, never shuts down randomly. I am so happy, best 2300 i've ever spent. I still constantly read about problems with wireless connections and faulty airport cards, mine work perfect. Is there anyone else out there that is completely 100% happy with their macbook pro. because i can't say enough grea tthings about mine.

    Mine's nice too, although I've only been using it for four hours. I may have a different opinion later.
    Even Windows works pretty well on it. It warms up faster than my 12" Powerbook (almost immediately) but keeps at that level a lot better (whereas my Powerbook occasionally spikes 10 or 15 degrees up and takes a long time to cool off).
    Only problem I've had is a weird sleep thing which might be user error. I made another thread about it.

Maybe you are looking for

  • Pdf forms possibilities

    hi everyone I'm a complete newbie to pdf forms and using acrobat pro so just wanted to test the waters with a few questions if someone could help me out please. 1. With forms can you create multiple choice questions and when the reader selects an opt

  • Mail adapter question

    I have a question regarding the mail adapter scenario.  Firstly data goes to ECC and some validations are performed and if there are any errors, ECC will provide me with some indicator saying this record has errors. Now, the same structures are used

  • Maximum size of a floating-point number

    Morning all, Does anyone know what the maximum size of a floating point number can be under Solaris 8 running on a V880? Regards, Richard Breckon

  • Web Site name

    Hi there, Ok so I'm new to using iWeb so please forgive me if this question has been answered before. First off, do I need to use the web.mac.com/My.MacId/PageName for my address? I am using my .mac account to design a page for my business and this w

  • Cant add HP1215 printer

    Hi, My Hp PSC 1215 all in 1 USB printer was working fine yesterday.. Today there are no printers in my printer list so I tried to add it back on and got the following error 'An error occurred while trying to add the selected printer client-error-requ