Is my MBP fry? please Help!

I think I fry my early 2008 MBP I have ask at the mac forum but my question is on page 5 after only 16 hours and 0 answer.
I have rely on the technical advise of many of you before I know you are capable and helpful.
Here it goes:
Yesterday was a bad day for me and my MBP with two USB only, haven multiple external I have to buy a USB hub with power it work fine.
I went to work with my 2 R60 and the MBP so I disconnect every connection including the USB Hub.
As my return star putting all cables back, here I made the mistake of using the power adapter from a external hitachi drive in the hub the keyboard was connect and from there to the MBP, when I connected the light of the USB Hub blink that's all, at that moment I realize that I never seen it blink try to power up the MBP but that was it no more booting, later I found out that the keyboard was gone too.
The ironic part of this history is that I was previously leasing to a audio book "Electric Universe The Shocking True Story of Electricity by David Bodanis which I recommend, so I could picture those electrodes running at 100 miles p/s inside the MBP.
Now please if you could comment or help me I will be very appreciated because it has never happen to me before so I have no idea what have gone wrong, of course the mother board or logic board is my useable suspect but I am not sure. The only thing I am sure that it does no boot.

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
If that does not work, you probably need a new logic board.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Similar Messages

  • When i press shut down my mid2010 mbp restarts, please help!

    when i press shut down, my mid 2010 mbp restarts, please help!

    OK, that eliminates a sticking power button, which would have been a possibility if you were using that button to bring up the Shut Down option.
    Does this problem occur when you're running on battery power, on AC power, or both?
    In System Preferences > Energy Saver > Power Adapter tab, do you have "Start up automatically after a power failure" checked? If you do, uncheck it, quit System Prefs, and see whether the problem persists. Post back with results.
    Oh, and since you say this also happens when you select "Sleep" — does it happen when you close the display to put the machine to sleep, or only when you select the "Sleep" command from the Apple menu?

  • Movies not clear in MBP 13, Please Help

    Hi,
    I just got a new MacBook Pro 13. Everything looks good but movies are not clear. Picture is not sharp. Color and brightness are fine.
    Resolution is 1280 x 800. Tried all players, VLC, Divx, Quicktime, Elmedia.
    OS - Mac OS X 10.7.3. Please help me.
    Thankyou very much

    I probably should've mentioned I'm not very good at this technical stuff... I've made videos on final cut before..... But I'm not good with the specifics
    A friendly suggestion: learn how to find the specifics. If you're not a tech-type, then it helps to at least know how to find the info required. Video editing has evolved into a very techie endeavor - it takes more than just story telling ability to be a good editor these days. There are dozens and dozens of video formats and codecs; each with their own data rate and storage requirements. And if you don't want to keep up with all the details, at least learn how to find the details so when you do run into problems, you'll at least be able to define your situation better to others that are offering help.
    Best of luck,
    -DH

  • Question about Windows 7 on MBP! Please help! :(

    Hey everyone, thanks for taking the time to check out my problem. Basically, I'm getting a MBP soonish (yes, I'll be waiting for the coming update). I'm a student (17 years old), and have used Windows my entire life - so on my MBP I definitely won't be using the Mac OS, I just can't be bothered adapting myself to an entire new OS. Anyway, here are my questions:
    1) If I solely use Windows 7, is it still possible to alter some of the physical options of the MBP? (e.g. the trackpad, touch sensetive or pressing to click, two finger click = right click or not, and so on).
    2) Will the trackpad gestures still work, even though I will be using Windows 7?
    3) I am aware that Apple products sometimes get Firmware updates. Will a popup still appear if I am using Windows 7? If not, where can I see/obtain the Firmware update?
    4) I'm not very tech savvy about Mac OS, but, when I get my MBP and the IT guy installs Windows 7, will the Mac OS still be 'on' the laptop? Or will it ONLY be Windows 7? Should I bother about having the Mac OS on it, even though I will never use it?
    Thanks so much for your help everyone! I really really appreciate it.
    Regards,
    Brad.
    Message was edited by: Brad1549

    What you're essentially looking to do is replace the engine of a Ferrari with a diesel lawn tractor engine (nothing against diesels, the new ones are excellent). Windows is slow and clunky and always gets in your way with constant interruptions and maintenance that always has to be done. I'm a student too (20 yrs old) and there is absolutely only one reason to run Windows and that is for games. Everything else can be accomplished much more easily under Mac OS X.
    So the obvious question that I have is... why would you want to run Windows when you pay a small premium for the Mac hardware? You've already said you don't want to be bothered to adapt yourself to anything new and you think that you're not "tech savvy" enough to switch. In reality, you are the perfect person to switch from Windows to OS X. My girlfriend was just like you. Didn't initially have any interest in changing platforms, and wasn't that tech savvy (but wasn't a luddite either, for sure). I convinced her to get a Mac largely with the premise that Windows could be installed if she didn't like OS X. And she loved the hardware. So she got the Macbook, first night, and played around with it a bit. I came over the next day to install Windows and she told me she had no need for it and didn't want it at all. She has never used Windows at all since then. It took her one night to "adapt" herself to OS X and she said herself that she's more productive and happier using a computer since switching. And I know dozens more people exactly like this. Not only will you be the cool kid running OS X instead of clunky old Windows, you'll be more productive and happier too. How can you lose?
    Anyway, if you have a specific app to run in Windows you can use Boot Camp. Boot Camp installs Windoze directly onto a separate partition on the hard drive. You can then use the Alt (Option) key to toggle between 'Doze and OS X at startup. Windows will run at full native speed, and will use the dedicated graphics chip in the MBP (if you get a 15/17" model that has one). Windows will use more power and generate more heat than OS X. As a result, battery life on Windows is considerably less than OS X (talking 3-4 hours compared to 5-6, probably).
    If you do decide to go ahead with Windoze only (for some insane reason) then you will need to keep OS X around if you ever want firmware updates. Windows will never remind you of them, so you'll want to keep an eye on Software Update in OS X every month or so. The trackpad gestures will not work in Windows because Windows doesn't have trackpad gestures like OS X does. OS X is somewhere in the range of 6-8GB in size now, I think.
    I say you should +at least+ give OS X a chance. Use it for a couple days. Ask questions if you have any. If you hate it after that, then go ahead and use Windows. But at least you'll know you tried something different. Learning new things (that are better than existing ways) is one of the best things we can do for ourselves. There is absolutely no reason not to be constantly learning and growing. To willingly shut yourself off from that is a shame, IMHO.
    --Travis

  • Can't get sound to tv from MBP. PLEASE HELP.

    I am having trouble getting sound to the tv from my MBP. I tried it on two televisions, a sharp and an LG. The only way I could get sound was through a stereo receiver on the sharp, and that took some doing.... So, I tried on the tv I mainly watch - and no sound. Is there possibly a setting within the tv, or should sound be automatic once i connect the rca into the headphone port on MBP.
    The tv has the hdmi for video, and ports for audio, I plugged the white and yellow. I know it is probably something really simple - but I have tried all that I know to do. Thanks in advance....

    You need an adapter. Mini DisplayPort can not output audio.
    Mini Displayport Male and Toslink Audio/USB Male to HDMI Female Adapter
    http://www.cablematters.com/pc-56-26-mini-displayport-male-and-toslink-audiousb- male-to-hdmi-female-adapter.aspx
    Then you need another HDMI to HDMI cable to connect this adapter to TV

  • Please Help - sync MBP to MacPro ?

    Hello,
    I have a MacBook Pro and a Mac Pro (see profile for full details). I'm new to having a laptop AND a desktop... whenever I go on trips I need to use the laptop but then come back and use desktop. Ideally, a good idea, but...
    What I'm missing is how to sync the files??
    I have files on MacPro not on MBP and files on MBP not on MacPro. It's becoming a mess. Right now I'm doing transfers manually and it's horrible! Esp. cuz I have to transfer all from one comp to an external drive and then onto the other computer. Time wasting!
    There must be an easier way?
    Plus, the real issue is _I don't want to sync all files_. Just essential ones. Main big file system stays on Mac Pro, smaller travel needed files need to be on MBP.
    Please help?
    Also, I have a major initial problem yet to be resolved, I posted here: http://discussions.apple.com/message.jspa?messageID=10625174#10625174
    No one has answered it still! (Did I post in wrong section?) Hence reason why I cannot leave out the 'external drive' part because all files when I transferred came up with MINUS signs and I can't access them (unless I copy them THREE times to THREE different locations - makes NO sense to me!!)
    Thank you so much in advance for anyone who helps! I'm really frustrated and want all to work ASAP!

    Thanks AW - I might try to redo as per your advice, but when you say clean install, you mean to literally wipe the whole drive and reinstall the operating system? At this point, I'm not sure it's the best thing since there's only a limited number of files I need within the 'minus' folders. My main working folders transferred ok since I pulled them from the external fw drive.
    The problem still would stand though, as to how I sync files after I use migration utility, if I try it again. Is migration utility supposed to be used every time I sync? I thought it was just for my initial set up.
    Fortuny - I have heard of ChronoSync and had been planning on looking into it for backups. I didn't know it could be used to sync laptop to desktop though...
    Can I use ChronoSync to sync user files? I am wondering if I could just avoid the migration utility all together and use this ChronoSync instead and not get all these weird permission issues... Maybe?

  • Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

    The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
    So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
    ANY HELP OR ADVICE WOULD BE HELPFULL,
    THANKS GUYS

    THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
    BUT YEAH THANKS AGAIN...
    WASTE OF TIME THIS IS...

  • After EFI Firmware update 2.3, MBP Early 2011 will not boot. During restart it all went wrong please help!

    Hello,
    I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
    I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting.  I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
    Thank you and please ask any questions!

    Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.

  • Please help my MBP is so slow after installing yosemite

    After installing Yosemite my computer lags, crashes, and is so slow. Please help!!
    Problem description:
    My late 2011 17 inch MBP has slowed down so much since installing Yosemite. My mail and other apps just crash or i get the rainbow ball of death.
    EtreCheck version: 2.1.8 (121)
    Report generated March 5, 2015 at 1:39:55 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (17-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,3
        1 2.5 GHz Intel Core i7 CPU: 4-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 140
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1920 x 1200
        AMD Radeon HD 6770M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 10:23:42
    Disk Information: ℹ️
        APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.93 GB (584.36 GB free)
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Logitech USB Receiver
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.4.28 - SDK 10.6) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.4.28 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.4.28 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.4.28 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.4.28 - SDK 10.6) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.spindump_agent.plist
        5 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.wdhelper.plist
        5 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.coupons.coupond.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.rosettastone.rosettastonedaemon.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        SpeechSynthesisServer    Application  (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        AT&T Locker Uploader    Application Hidden (/Applications/AT&T Locker Uploader.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        KiesAgent    Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
        fuspredownloader    Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
        CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        Evernote Web Clipper
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 748.93 GB Disk used: 164.57 GB
        Destinations:
            My Passport [Local]
            Total size: 999.83 GB
            Total number of backups: 30
            Oldest backup: 2014-02-25 21:26:49 +0000
            Last backup: 2015-02-12 12:32:16 +0000
            Size of backup disk: Adequate
                Backup size 999.83 GB > (Disk used 164.57 GB X 3)
    Top Processes by CPU: ℹ️
             6%    WindowServer
             2%    Google Chrome
             0%    AppleSpell
             0%    fontd
             0%    Google Drive
    Top Processes by Memory: ℹ️
        365 MB    Google Chrome Helper
        189 MB    Google Chrome
        69 MB    mds_stores
        69 MB    Finder
        56 MB    WindowServer
    Virtual Memory Information: ℹ️
        33 MB    Free RAM
        1.36 GB    Active RAM
        1.34 GB    Inactive RAM
        1.19 GB    Wired RAM
        13.90 GB    Page-ins
        266 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 5, 2015, 01:08:29 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Mail_2015-03-05-010829_[redact ed].crash
        Mar 3, 2015, 03:14:22 PM    Self test - passed
        Mar 2, 2015, 03:55:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/coupond_2015-03-02-155545_[red acted].crash

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • MBP running at a snail's pace, and a myriad of other interrelated issues, please help :'-(

    Hello, my MBP is running very slowly, MS Office for Mac constantly freezing, Safari constantly freezing, various little issues are arising with many different functions/programs when I try to use them; i.e., the enter key will just stop working in Excel or my Adobe Acrobat will shut itself down out of nowhere, Finder freezes and/or won't relaunch; these are just a few examples, but the overall theme is that I am experiencing problems in usability and functionality with my MBP across the board. There is no rhyme or reason to any of it, and all programs and apps seem to be affected. I first began noticing the problems upon installation of the Yosemite upgrade so initially thought that was the issue, but I have since found that malware items have added themselves to my Safari extensions. I found instructions to remove them entirely, but could not find them anywhere on my computer other than the Safari extensions when I followed the steps provided. I tried clicking "uninstall", but had no luck, which is not surprising since I am pretty sure the "uninstall" option listed with the extension is just part of the malware. I have "disabled" the extensions, but that didn't do anything. I'm sure that they have implanted themselves elsewhere and are lurking in the shadows of my operating system and wreaking havoc throughout my computer.
    The whole situation is making it extremely difficult to get anything done, and if I don't fix it soon it is going to be the major contributing factor to my complete mental collapse.
    PLEASE HELP!!!
    I tried to find suggestions in other areas of the Apple Support Community, and found the EtreCheck tool in one of the discussion threads. I ran the report on my system, and it looks like my MPB is riddled with problems. I don't even know where to begin in order to correct them. I am not sure if the malware has just taken over and is behind all of these, or if I am dealing with several different sources of trouble.
    Any help with this would be much appreciated, the EtreCheck report is as follows:
    Problem description:
    MBP usability decreased significantly after installing Yosemite. Computer constantly freezing and completing any task in any program/using any function of MBP takes 5-10x as long as it used to.
    EtreCheck version: 2.1.8 (121)
    Report generated February 8, 2015 at 7:53:07 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 364
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 4 days 17:53:1
    Disk Information: ℹ️
        ST9500325ASG disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (332.61 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Kies.app
        [not loaded]    com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) [Click for support]
            /Library/Extensions
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.rcd.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        9 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.GSSCred.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.installd.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        15 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [running]    com.canon.MFManager.plist [Click for support]
        [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [loaded]    com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
        [loaded]    com.kodak.KODAK AiO Software Updater.plist [Click for support]
        [running]    com.kodak.StatisticCollection.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    UNKNOWN  (missing value)
        bomgar-scc-20140103-113305    UNKNOWN  (missing value)
        KiesAgent    Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
        fuspredownloader    Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
        AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        Saveonmac
        iMedia Converter Deluxe 
        MacVeXe
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        DivX  [Click for support]
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            16%    WindowServer
            11%    SophosAutoUpdate
             8%    com.apple.WebKit.Plugin.64
             8%    Safari
             2%    SophosUIServer
    Top Processes by Memory: ℹ️
        120 MB    Safari
        116 MB    SophosWebIntelligence
        43 MB    SophosScanD
        43 MB    InterCheck
        39 MB    WindowServer
    Virtual Memory Information: ℹ️
        44 MB    Free RAM
        751 MB    Active RAM
        724 MB    Inactive RAM
        1.21 GB    Wired RAM
        60.34 GB    Page-ins
        819 MB    Page-outs

    The minimum requirement is 2GB, but most people think 4GB is the bare minimum.
    I primarily buy from Crucial, Other World Computing, or MemoryTen. As long as they have a "configurator" where you pick you exact Mac from a list and it lists all the compatible memory for that Mac, AND it has a lifetime warranty on the RAM, it should be ok.  Macs are very picky about the RAM because they use it to its full capacity. If there are any faults in the modules, it will crash.
    There are suggestions for sites in other parts of the world on the EveryMac website. Look down in the Section for RAM where you'll find links to their sponsors (OWC is the US-based one).
    In Apple's world, there is a difference between and "Upgrade" and an "Update." Updates should generally be installed as they patch vulnerabilities and fix bugs.
    Upgrades on the other hand are an entirely new Operating System (OS). A change in the OS can cause many problems with your installed software as it may not be compatible with the changes. It may rely on programming interfaces that have been removed. They should know that they will be removed as Apple publishes those facts many years prior to removing the features.
    An Upgrade takes you to a major, new version of software whereas and Update just makes changes to the same major version of the software.
    Yosemite was an Upgrade, not an Update.

  • Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!

    Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
    My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
    I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
    I have run "disk repair" and "permissions" on both machines.
    BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
    I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
    Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
    The new MB "sees" the e-drive connected with the same cable.
    I can't transfer my files to the new MB nor can I back up.
    Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
    Can someone please help me?
    Thanks in advance.
    Tek

    Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
    I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
    Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

  • Please Help! MBP shutting off when plugged in, now not recognizing MagSafe Adapter

    I started seeing this problem a few weeks ago, my MacBook Pro just shut off spontaneously while watching a video full-screen. I turned it back on and the problem went away for a while. But now, the shut-downs happen more frequently. It doesn't matter if the MBP is running off of the battery or if its running off of the AC cord, it will just shut off. No warning. No standard shut-down process, everything just stops and a balck screen shows up. After it shuts off, it takes a few seconds to get it to restart, and when it does, the computer's date and time will be reset to some date in 2000. Very strange, I've had this computer for a year and I know people with the same model that have had no such problems. The battery is at 168 cylces (I use this for school, so it was being used everyday throughout the last two semesters), and the Condition is listed as Normal in the System profiler, so I doubt the problem is with the battery, but I could be wrong. I've seen posts about the RAM/PRAM causing the date/time resets. Nevertheless, the MBP has been running normally on the battery, battery life is still the same length of time as it was when I first got the computer, and runs smoothly. Up until last night, the AC MagSafe Adapter was still working, so I only used that as the power source. Everything was fine, but the MBP shut off once or twice while it was plugged in within the last month or so, but the AC would still have a green light, indicating the computer was still recognizing the power source. Now, I can't get the MagSafe to be rocognized at all. The computer is running on battery only, and I've tried resetting the SMC, but I'm unsure if it worked since the MagSafe is still unrecognized. When its plugged in, the System Profiler says it is not connected and not charging.
    I'm running on Mac OS X 10.6.8, a 2.4 GHz Intel Core 2 Duo, with a 4GB memory (of which less that half is used). Computer usage is low, so its not like I'm running several programs at once, at most, its two or three at a time, for short periods. My MBP is a 13" aluminum body, doesn't seem to be overheating, has worked fine after long periods of being on and getting hot, I always let it cool down after I feel it getting too warm.
    Please help if you can! Thank you!

    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          0002
      Cell Revision:          0164
      Charge Information:
      Charge remaining (mAh):          2037
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          5078
      Health Information:
      Cycle count:          168
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -917
      Voltage (mV):          11235
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          5
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          1
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    thanks for the quick reply~

  • Please help. When I click on the download folder then MBP crashes

    Please help. When I click on the download folder then MBP crashes

    I see. Not good.  Does this happen when you click on it in the Dock?  What about in your home folder? What about in the Finder sidebar?
    Standard troubleshooting things to try:
    * Hold command-r while starting up to get into Recovery Mode.  Run DIsk Utility and "Repair Disk".  (This is probably a good idea in any case because of the possible disk errors which could accumulate due to all the freezing.)
    * Hold shift down while starting up to get into Safe Mode. Does the bad behavior persist while in Safe mode?
    charlie

  • Please help with ejecting disk from MBP that won't book

    I was in the middle of installing a Leopard update when my MBP froze.
    Since I had to tunr it off, it now won't start up.
    I tried a friends OSX install disk to get it working and it won't install.
    Please help me eject the disk.
    No matter what I do I cannot get it out.
    IS there a Terminal prompt to eject it.
    The install disks won't allow the command under disk utilities because it is starting up with that disk.
    PLease help.

    hold down the trackpad button while rebooting the computer

  • Please help: Mouse cursor on MBP repeatedly freezing for a few seconds

    Hi all
    I bought a MBP last week, and today I started experiencing problems with the mouse cursor. No matter whether I'm using the trackpad or an external mouse (I've tried using both a wired Mighty Mouse and a wireless Logitech), when I'm moving the cursor it keeps freezing for a few seconds (perhaps less than a second), and then I "regain" control of it, only for it to freeze again after a short while.
    The only thing that I can think of that might have something to do with this is that I replaced the 2GB of Apple RAM with 4GB of OWC RAM a couple of days ago. Can this be the reason?
    Please help me, as this problem renders the computer impossible to use:(
    Thanks in advance
    Daniel
    PS: I'm running Mac OS 10.5.1 and I've got the Keyboard Freeze Update Installed.

    Hi.
    I have a similar problem, however I realized it is somehow related to weather the airport is on. If I turn it off, there are no freezes. It is weird, and I'm going to go with it to Apple.

  • MBP crashing every 5 mins Please help!!

    Hello,
    I finally decided to make the 'Switch' just to find myself with alot of trouble. Right after getting my brand new MBP 2Ghz out of the box two days ago, it started crashing.
    Problem seems to be happening when I download updates, or try to see heavy webpages.
    I used my old computer to download the latest firmware and OS X update and installed it into my MBP using a USB memory thing, but that does not solve the problem.
    I also ran the disc utility to make sure that my new computer didnt have problems and nothin, still crashing.
    Please help!
    Thanks

    Sorry you are having problems. Here are some suggestions:
    [1] To make certain you are not having hardware problems, insert Installation Disc 1 and restart while holding down the D key. Choose the extended test option. If you get an error message, call AppleCare.
    If no errors reported,
    [2] I would recommend you do a disk wipe and a clean install of the operating system. To do that, restart from Install Disc 1 while holding down the C key. After bootup, choose Disk Utility from the menu. Select your MBP startup disk and choose Erase (some recommend Secure Erase, which may catch any bad blocks on your drive). Secure Erase takes more time.
    Then do a new install of the operating system and the included applications and demos.
    Play with the computer a while. It should not be crashing. I've had mine since March 30 with nary a panic, crash or freeze.
    Don't add any files from your old computer yet, or download any apps from the Net. Now hook up to the Net and select Software update. Install everything. Note: Some people have had crashes related to the setup or hardware of their wireless routers. If that happens, try an Ethernet connection to your modem and do the updates. Read this forum and search re router problems.
    Play with the computer some more, web browsing, etc.
    If you had used Migration Assistant to bring over files from a previous Mac, that may have been the source of problems. Think about fresh installations of just those applications that you need and that you know to be compatible with your Intel Mac. Then bring over just the data for those files.
    Good luck. It's possible, though not likely, that there had been a problem with the original installation of your operating system. If so, that problem should have been corrected.

Maybe you are looking for

  • My printer will print if I email it to printer but I can't directly print as my ipad cannot find the air printer???

    My ipad is not able to find my printer the message- no airprint printer can be found is displayed, but I am able to email to my printer from my ipad and successfully print??? I want to be ale to print a picture directly. How do I get my ipad to find

  • New address to be printed in the delivery output type

    Dear all,                 For the delivery i issued one output message to take the printout of the shipping label . Now i changed the address in the ship to party and again issued the message , still it is taking the old adress only is there any poss

  • Custom logon module not called by the portal

    Hi, all. I need some help urgently on this new portal requirement. There are some sensitive ESS/MSS iviews that we need to give the users an additional logon challenge. The normal ESS/MSS iviews will be using SSO. This one will still use SSO, but hav

  • Unwanted Contact Requests

    Unwanted Contact Request IS THE REASON I AN QUITTTING SKYPE AND WILL NO LONGER PAY FOR THE SERVICE

  • Software update for Lumia 820

    Been a few days that i received the update for Lumia 820 via email but due to some problems could not download the update but now when i search the update its gone,so any way to get it back? Suggestions please..