Is my pavillion p2-1049 a touch screen model

i have a new hp p2-1049 pc with windows 7 , is this pc equipped with touch smart , or touch screen capabilities, if so how do i use it ?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

How to check Touch screen model

Recently i bought lumia 620, and on screen i noticed some stains, they didnt harm screen, it was perfectly worked but was annoying, i gave back mobile to service and they changed me touch screen and returned me mobile, now look like everything ok, but i think touch is not working like old one with stains, its like lower sensitivity or something, how can i check model of this new touch to know is same quality like old one, or is some bad copy of touch screen.

ivica001 wrote:
Recently i bought lumia 620, and on screen i noticed some stains, they didnt harm screen, it was perfectly worked but was annoying, i gave back mobile to service and they changed me touch screen and returned me mobile, now look like everything ok, but i think touch is not working like old one with stains, its like lower sensitivity or something, how can i check model of this new touch to know is same quality like old one, or is some bad copy of touch screen.
You can adjust screen sensitivity at settings, touch - normal or high.

Dual Monitors With HP Pavillion ALL in one Touch screen

I hope somone can help me with this I have a hp pavillion all in one touchscreen with wireless capabilities.I want to utilize my older computer monitor a compaq to work with my All in one. so utilizing dual screens. I brought a vga to usb adapter and the all in one does not detect the older monitor. Could someone please advise I went into the screen resolutions and click detect and nothing when i click to identify it shows 1

Ywillia, welcome to the forum. Here is a guide that may help you solve your problem. If it doesn't help, you should provide the model of the old monitor so we can check to assure that it is compatible with Win 8.1. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.

N8 - touch-screen still active during phone calls,...

I've made a few calls with my N8, and I'm finding that the touch-screen is still active when I hold the phone to my ear. I've accidentally hung up on people, or have inadvertently activated other apps. Is this something I can fix in tools?
The sound during calls is also very low (even at maximum volume), which compounds the above problem even more, as I push the phone closer to my ear.
If nothing else, the N8 should be able to function perfectly as a phone, and this is really frustrating - I never had this problem with other phones.
Also, on the 2nd use of the photo edit program, it took a long time to save the photo, and then the phone froze. Is anyone else having problems with this?

I too fact these problems i.e touch-screen still active during phone calls leading to unintended "hold" on the calls or screens navigating else where. Yes, the side lock bar helps, but then it is not very handy way for a costly model to be designed. Even the older cheaper nokia touch screen model did not have this problem. Let NOKIA people respond to it.
Yes, the sound is too low even at the maximum. Nokia support centre plead helpless.
I think we all made a big mistake in investing in this costly handset.

The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works.

The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works. Cant use calibration tools as there's no response to touch. No option in control panal to turn on or off touch capability. I have no computer background so cant really get to technical. Is something simple turned on or off located in some mysterious place? F key or something? Bad machine? Thanks for any input. Sarah

http://www8.hp.com/au/en/drivers.html
I found the driver at the above link. I installed the driver, disabled my graphics card and rebooted. The touchscreen worked. Then I enabled the graphics card. So far so good. Hope I dont have to do this routine too often.
Good luck with it.

HP Pavillion 23tm touch screen does not work with Windows 8

I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.

wilandmari wrote:
I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.
Hi,
ASUS does not make "Pavillion 23tm ", only HP. Anyway, hope no damage after a repair. Please try:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03488148
Otherwise, ask the repairer to fix it for you.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Replacement non touch screen for Pavillion TS 15-B103AU

He, we have a HP Pavillion TS 15-B103AU with a cracked screen. IS there a DIY replacement screen I can get to replace it? I"m an IT professional myself so am confident doing the work, also I'd prefer a non touchscreen as we never really used the functionality anyway and I know a non touch screen would be a lot cheaper

Hi,
Please check part # on the second manual of the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=5358508
The manual also shows you how to replace screen (page #60).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i find serial number and UPC of my laptop pavillion dv6 touch screen

How can i find serial number and UPC of my laptop pavillion dv6 touch screen if i do not have the sticker at the back or below the battery .. thanks

Hello,
The hot key combination you can use at the desktop screen is "FN + ESC". That should bring a system information window on the screen with the computer information including the serial number.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How can I disable touch screen for HP Pavillion DV3-2310ea

Howdy
The touchscreen on this laptop can be annoying - even though I've reduced the sensitivity, living in a cat rescue home is challenging to say the least when a strand of cat fur gets on the screen or when a tail brushes the screen, not to mention a cat sneeze -_-
I've been looking around for solutions and I found one stating unchecking the box in "Pen and Touch" in the control panel - however on this laptop there's no box to uncheck
I can't find any settings to disable touch screen, so would anyone know if there's a driver I can temporaraily disable (I'd like to KEEP the option to enable the touch screen - just to show off to friends )
Thanks for your time - Gypsy
P.S I'm sorry if this topic has already been discussed I've just joined to ask this question

Hello,
Would like to leave my contibution on this post:
In order to disable the touchscreen, you have to go to control panel, select Tablet PC settings, then select Pen and touch and do what the print screens below show you:
Let me know if this sorted out your question.
Thanks,
I work for HP! Please remember to provide and if this helped click ON
Attachments:
12513771_image7.png ‏35 KB
windows-8-tablet-pen-and-touch-settings.png ‏154 KB

Touch screen doesnt work on hp pavillion touchsmart 14

The problem: The touchscreen on my touchsmart 14 sleekbook doesnt work.
A couple weeks ago I had this weird problem where the clicker/mouse/arrow thing kept going up to the righthand corner of the screen and I couldnt get the mouse back down even though the scroll pad was working.
I kept having to restart my computer to make it work
Now the touchscreen doesnt work at all and I dont know how to fix it, and yes my computer has been turned off an turned on since then many times
Thank you
Also I did all of this
Press the Windows logo key + X.
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list and update the driver.
Click the touch screen driver
Right-click, and select Enable from the list.
Click Yes on the dialog box that asks if you are sure you want to enable the touch screen driver.
I had to disable and re-enable and it doesnt work

Good Morning @HSolomon ,
Welcome to the HP Forums!
It is a wonderful place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are experiencing a difficulty with your touchscreen. Here is a link to Troubleshooting touch screen issues in Windows 8 that will assist you through some steps.
Have you tried Using automated troubleshooting (Windows 8) to overcome this difficulty.
Have you ran the HP Support Assistant to aid with HP updates and help resolve issues?
You may also consider contacting HP support for assistance. They can remotely access your system to help overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Glass touch screen Digitizers on 13.3 displays

So the glass touchscreen on the Pavillion X2 is smashed but the display is ok. I cannot find the glass Digitizer for the PavillionX2 13.3 but can find one for the Envoy 13.3 . both screens are the same size - look the same and searches for a digitizer for the Pavillion leads to the Envoy 13.3 digitizer so the question is are they compatible ,the same 13.3 digitizers connections and can I purchase the Envopy 13.3 digitizer touch screen glass and have it work in a Pavillion X2 ? Or does the " display" part listed for the X2 include the glass digitizer for touch screen ?

Hello @SirJW,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the glass touch screen on your notebook computer has shattered, and I would be happy to help you!
To better assist you, I will need to know the Product and Model Number of your notebook computer. This will help me to find the necessary replacement part for your computer.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Touch Screen unresponsive after iOS 8 update

My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

I have the same issue. iPhone 5, 1 year-old, not even a scratch.
Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
Is it really not recommended to downgrade it and have my phone funcionalities back?

Is my pavillion p2-1049 a touch screen model

Similar Messages

Maybe you are looking for