Is my Power Mac G5 with 2 x GHz that cost nearly £2000 now finished.

My Power Mac G5 has 8Gb of ram with 2 x GHz processors and runs like a dream. I mainly use it to record music for Television. The man in the Mac shop told me I can't upgrade my system to Snow Leopard. That's not very good is it.
However I'm sure the kind people at Macintosh will respect the fact that there are many customers who bought PPC Macs not so long ago and don't plan on buying brand new replacements quite yet since they are still happy with their current machines.
Does anyone know whether Steven Jobs plans to allow us PPC users to upgrade to Mac's "Lion" OS next year?

I recall how a lot of service bureau systems stayed with OS 9 because "it works" and all their workflow and graphic design really didn't need all new software, hardware, etc.
Your G5 2.0DP came out in Oct 2003.
My SE/30 was a great buy in 1989 for $4100 too, but replaced that with Quadra 650 and then PM7100 and eventually some G3s and G4.
People with Snow Loepard complain about how it is a memory hog, sluggish, Safari 5 doesnt' run well, issues with Java, Flash and more.
You could pick up an iMac from Apple Store Specials next year after Lion has been out and had time to iron it out.
http://store.apple.com/us/browse/home/specialdeals/mac/imac
Lion sounds like a lot of... consumer mobile support for pads, phones, and all these new fangled gadgets and new interface. Give it a year or two to mature. I still don't see that the path from Tiger to Leopard and on to Snow Leopard were more than some service packs and optimizing the kernel to be able to boot 64-bit kernel (like Vista 4 yrs ago).

Similar Messages

Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router. Any help, Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router.PLs help

Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
Mishcadola

I spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there!

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program can I used to transfer one hard-drive to another hard- drive on this mac pc.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.

The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989)

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

I have a Power Mac G5 with Cs4 Quark and I need to upgrade to CS5 - is this possible?

I have a Power Mac G5 with CS4 Quark and I need to upgrade to CS5. Is this Possible?? If so what do I need to do??

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way. And since CS is an Adobe product, you should probalby contact them.

Can't install Leopard 10.5.6 onto Power Mac G5 with Mac OS 10.2.7

I have a Power Mac G5 with Mac OS 10.2.7 and can't seem to install Leopard 10.5.6. Every time i try to install it it either says that it can not validate the contents of the Base System package or could not validate the contents of the Xll User package. If i could get suggestions on what i can try to install Leopard on to my mac G5.

Make sure it is a retail disc, as indicated here: https://discussions.apple.com/docs/DOC-2275 Make sure you understand the difference between Archive and Install and Upgrade and install here, and erase and install: https://discussions.apple.com/docs/DOC-2209 Make sure your data is backed up before you proceed: https://discussions.apple.com/docs/DOC-1992 Decide if you need access to Classic before you proceed, as it is gone with 10.5.

Latest operating system that I can use on a Power Mac G5 with CPU type Power PC 970 (2.2)

What is the latest operating system that I can use on a Power Mac G5 with CPU type Power PC 970 (2.2). This is not an intel chip. Thank you.

10.5.8 without Classic, or 10.4.11 with Classic.

I have a power mac G5 with a 23'' cinema hd monitor i can power up the system but no picture, i pluged it into a laptop and monitor comes on i need help

i have a power mac g5 with a 23'' cinema hd monitor, i can power up the system from monitor power button but the monitor doesnt come on, i pluged into a laptop and it works whats wrong i need help

Hi,
Safe Boot from the HD, (holding Shift key down at bootup), does anything show?
Try re-seating the Graphic Card in the G5.

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

Power Mac G5, Dual 2.5 GHz wont' boot

My Power Mac Tower, with Dual 2.5 GHz processors was off. When I push the start button, the white light flashes, the fan turns on then immediately shuts off. I suspect it is the power supply, is there any way to verify that it is the Power Supply before Igo buy another one.

I would try things in the following first......
Have you ever changed the PRAM battery? Your Mac is at the age where it may be depleted.
I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
For G4's and earlier models, check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. Most of his tips pertain to a G5 also.
G5 Tower users check Apple KB article HT2580 on DIY (Do It Yourself) Instructions. Click on the PDF for Battery.
Here is the late G5 SMU reset.
Early G5's use a PMU reset and the battery shown in the tutorial. The battery for late G5 (2005) + G5 iMacs and earlier iMacs, Mac Minis and Intel Tower Macs is this one.
DALE

Best video card for a Power Mac G5 Dual 1.8 GHz

What is the best video card I can upgrade to with my Power Mac G5 Dual 1.8 GHz?
Thanks,
Jeff

Hi-
The best is probably the one that you can find..... getting hard to find Mac 8x AGP cards.....
Best OEM cards are (were) Radeon 850XT, Radeon X800XT, Geforce 6800 Ultra and Geforce 6800 GT, in order from fastest.
X800 vs. others
Now, most options are the above, used, or, flashed PC cards. PC cards include the above, but have one faster than even the X850XT- the Geforce 7800 GS.
7800 GS in a G5

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Seagate HARD DISK Barracuda 2 TB 7200 64MB SATA3: can I fit in a Power Mac G5 Dual 2,7 Ghz (early 2005)?

Can I fit this Sata 3 in a Power Mac G5 Dual 2,7 Ghz (early 2005)?
Is there anyone who has bought it?
Thanks.

Hello,
G5s require SATA 1.5 Gb/s, some SATA2 or SATA3 drives are SATA1 compliant & step down, others do not, still others will if there's a true SATA1 Drive in slot 0.

Is my Power Mac G5 with 2 x GHz that cost nearly £2000 now finished.

Similar Messages

Maybe you are looking for