Is my roommate's computer blocking my WiFi?

My Mac Mini connects to our wireless network but won't load webpages; it appears that my new roommate's computer may be to blame. It appears that when he has his PC connected to our network I can't load webpages. As an experiement last night, he disabled WiFi on his computer and then about 30 minutes later the Internet started working just fine on my Mac Mini. We currently have other computers/phones picking up our WiFi just fine; nothing like this has ever happened. I ran a diagnostic on my Mac and everything checks out. I've been offline for about a week, beginning the day he returned from a trip.
This could all just be cooincidence and the Mac may be broken. I don't know at this point, but I plan to repeat the above experiment again to get conclusive results. In the meantime, any advice would be appreciated. Thanks!

Hi,
Could the PC be using a Static IP that kicks your Mac Off?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Similar Messages

  • Am blocked on wifi can i access my backup on pc

    iphone 4 blocked on wifi cant acess my backup

    Did you use TM since you upgraded to Mavericks??
    That could cause damage to the TM backups.
    I am really unsure how to advise you on this one.. but if you need the backups you have to take heroic measures..
    I would not use Mavericks.. if the backups were done under Mountain Lion.. get an external drive for the computer and load ML on it.. then get another disk and do a full restore of the backups to a different location.
    See the restore info in Pondini for help.
    Q14-17 here.
    Or boot with the original DVD and use TM to restore .. as per instructions here.
    http://pondini.org/TM/Home.html
    Use Setup Assistant .. or if all else fails use migration assistant.
    It may even be worth archiving the TC before you begin so you know all the data is preserved and Mavericks is not just going to wipe it out as soon as TM starts.

  • How can I have another Itunes account on the same computer for my wife?

    How can I have another Itunes account on the same computer for my wife?

    In case you didn't fully understand what dallon meant, it means another user account on your computer. You set that up in Windows and then instal iTunes onto that account.
    That way, you each have your own desktop and your own itunes. You can link to the songs in the other person's library as well, but you cannot run both iTunes at the same time. (That simply means you need to close it on the first account before opening it on the second account.)

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • My ipod nano 6th gen is not recognized by any computers, I've tried restarting it, resetting it, restarting the computer, any number of stuff it says on here, but it is still unrecognized by either my computer or my roommate's computer.

    Hi all!
    I have a 6th gen ipod nano. I wanted to sync it to get some new music onto it, but my computer won't recognize it. I've tried restarting it and resetting it numerous times, both plugged into the computer and not. I've confirmed that both the Apple Mobile Device service and iPod services are running. I've updated my itunes, I've updated my virus software (I highly doubt that is the problem, it's the same software I've always used and my iPod worked fine before) and I've tried any multitude of ******** "fixes" you can find in this forum or anywhere else on the web.
    The ipod does charge when I plug it in, and I've tried 2 of my roommate's cords, so that isn't it either. My USB drivers are also up to date and work just find with anything else, including my printer, my cellphone, etc.
    so... anyone have any suggestions?
    Oh, I'm also running a Dell Studio 15 laptop with Windows 7.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • What is "owner-pc-vaio". its in my shared column in Finder. would another computer using my wifi show up in the shared column?

    what is "owner-pc-vaio". its in my shared column in Finder. would another computer using my wifi show up in the shared column?

    If you're in a hotel, school, or someplace with public WiFi access, you'll see a list of all other computers on the network. 
    As opposed to the answers above, with or without sharing on, you will see others on the network and they can see you.  As long as you have sharing off, and even then, they'd not have unrestricted acces unless you disabled all password access, they can see you but they can't do anything.
    If you're on your own private network, someone is stealing your bandwidth.  Since it's a piece of junk Windows computer, you can find out how to send them a nasty virus over a LAN. 

  • I am trying to set up the MiFi4620L jetpack to my brother-in-laws computer, which has WIFI.  It does not recognize the jetpack.  What do I need to do?

    I recently put in a new SIMS card to our MiFi4620L Jetpack.  When I was at the Verizon Store the person who was helping me was able to sign onto the internet via the jetpack.  Now that I have my brother-in-laws computer, which has WIFI, I am unable to set up the Jetpack.  It does not recognize it.  What do I need to do to get it set up?

    If the PC cannot "See" the Jetpack then that means one of the following has happened:
    1. The wireless adapter in the PC is defective
    2. The Jetpack is defective
    3. The wireless adapter on the PC cannot see the signal coming from the Jetpack (2.4 Ghz vs. 5.0 Ghz)
    4. There are too many competing wireless signals and the PC cannot see the signal from the Jetpack
    Solving 1 and 2 is a simple matter of trial and error.  Confirm that the PC can see and connect to other networks.  Confirm that the Jetpack can connect to other PCs.  After that you need to check the specs on the Jetpack and the PC wireless card to make sure they are compatible.  If they are but the Jetpack is still not visible then that usually means the air is too crowded with competing SSIDs/Network names.  This is common in urban/apartment/dorm scenarios where multiple signals are exposed to a single machine.  The solution is either to move to an area with less competition, convert to an Ethernet cable via a wireless bridging device, or migrate to 5.0 Ghz (this jetpack only works on 2.4 Ghz).

  • HT4906 for the life of me a can't get it. I need to transfer contacts from my mac computer to my wife's IPhone. Help please

    For the life of me I just can't seem to get it.  I need to transfer my contacts from my mac computer to my wife's IPhone.

    Ok I figured it out myself But for anyone else with the same problem I tried re-setting my network settings and that did the trick. I should have thought of that!

  • When trying to access itunes store all I get is a white page with word itunes store and never access the store. Is my computer blocking access?

    When trying to access itunes store all I get is white with word itunes.   This is recent issue.  Is my computer blocking access?

    With those symptoms, I'd check the following document:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

  • HT1386 How can I synch my iPhone 3G on the same computer that my wife synches her iPhone 4S?

    How can I synch my iPhone 3G on the same computer that my wife uses to synch her iPhone 4S?  How can we keep our apps, contacts, calendars, etc. separate?

    You'll have to create separate user accounts to keep your iTunes libraries separate.
    How to use multiple iPods, iPads, or iPhones with one computer: http://support.apple.com/kb/HT1495

  • 2 iphones 1 computer. updated my wifes phone to ios 5 her phone got wiped of all apps and all my contacts are on her phone. we had been using the same apple id but different user accounts on our laptop. How do i get her phone back to normal?

    2 iphone 4, 1 computer. i upgraded to ios 5 and just updated my wifes phone as well. her phone got wiped of all apps and all my contacts were put on her phone. we had been using the same apple id but different user acct on our laptop. How do i get her phone back to normal??

    Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

  • HT4913 i am trying to get my computer and my wifes computer on my itunes match.  i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

    i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain.  is this going to screw my wifes account up? 

    If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
    iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

  • Create a TS Variable in MDT 2013 to set Computer Name to Wifi Mac Address

    Hello,
    I'm currently using the following rule to pick up the MAC address of the computer:
    OSDComputername=#Right(Replace("X%macaddress001%",":",""),15)#
    I have created an image for the Linx Tablets, which don't have an ethernet MAC Address, so I'd like to use the Wifi address instead (which would also help with network registration in our environment).  Does anybody have a solution?
    Thank you,
    Garin

    Hi,
    I highly recommend asking this question in the MDT forum, since this question is very MDT-specific:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=mdt&filter=alltypes&sort=lastpostdesc
    Perhaps someone who is familiar with MDT will see this, but I still think you stand a much better chance at getting a good answer over in the MDT forum.
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 12,700+ strong and growing)

  • Computer recognizes a wifi connection but does not connect to it?

    I Was in Moscow, and only using secure connections but now (away from Russia), still can't get to the internet.
    I See the wifi access points but the computer doesn't connect to them.
    Ideas?

    Hello Peter Kertesz,
    It sounds like you are able to see the Wi-Fi connection you want to use, but cannot connect to it. I would use the following article to help troubleshoot the issue. There is a lot of information in there, but stick with it and it should lead you to a resolution:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I use my computer with my wife, when i downloaded itunes it was on my part of the computer, but one day had my ipod connected to my wifes part of the computer and from then on have always signed into her part, but now cant retrieve my films from my part

    i cant retrieve films from i tunes that i downloaded on my part of the computer i share with my wife, as i somehow selected to sync on her part, now i keep getting a message that says, the ipod paddys ipod cannot be synced .you dont have enough access privalages for this operation.

    I'd wager a six-pack of cold adult beverage that you are still "logged in" to her iTunes account....
    Make sure you are logged in to YOUR computer account, then lauch iTunes.  Go to the Apps Store.  Verify that you can log in to YOUR iTunes account.
    From that point you should be able to get your stuff.  If not you may have to reset to factory and then restore from a backup....

Maybe you are looking for

  • CAD upgrade 8.0 to 8.5

    We're planning an upgrade from UCCX 8.0 to 8.5.  I've got the server upgrade pretty well documented, but I had a question about CAD.  Once the server is upgraded, and I re-run Desktop Admin, will the CAD/CSD clients auto-upgrade at next log-in? I kno

  • Replication of Marketing plan from CRM to R/3 in Web UI

    Hi, I have created a marketing plan in CRM WEB UI.I want to replicate it to R/3.But I am not getting any way as to how do I replicate it.Please guide me through this. Puneet

  • Fast rotation of image only for visualization

    Good day, i need some help in a problem i have encountered. We are developing an application for automated inspection of electronic boards. The user must insert the board inside a close box containing the camera and the illumination hardware, to help

  • Ebay app for Blackberry

    What has happened to the Ebay app for Blackberry.  I have a Q5 and have used the Ebay app successfully for the last year.  I was able to monitor my Selling Account etc.  Today I installed the update (after purchasing a media card for my photos and vi

  • Smart album: macro?

    I would like to set a smart album to locate all of my images that have been taken in macro mode, but I cannot find the macro field in EXIF and so am not sure how to set the filter. I thought macro was flagged up when a camera was taking a close-up sh