Is my router failing? - WRT54G wireless-G firmware v.8

It's gotten to the point where on average I have to power cycle the router at least once a day to regain the connection for both wired and wireless computers in our home network.
My questions are these:
1. Is there a way to diagnose the problem properly?
2. If the router is indeed failing, can anyone recomend a new one as this is the second router of the same type in two years to begin failing on us and to be frank im getting tired throwing 80 USD away every two years.

Your router needs to be Upgraded...Download the firmware from here
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...
Then, unplug the power cable while holding down the reset button for another 30 Seconds...
Plug the power cable back in, and keep holding down the reset button for another 30 Seconds...
Release the reset button...Now re-configure your router...

Similar Messages

Wrt54GS router and Wrt54GS wireless adapter on Xbox 360

Totally new in the wireless router business, I bought the Wrt54GS router and the Wrt54GS adapter to connect my Xbox 360.
I installed the router with the cd and connected my pc on the router with a fixed ethernet cable.
So far everything working fine.
Then connected the wireless adapter on the Xbox 360, but it seems like the Xbox 360 doesn't recognise the Wrt54GS adapter.
What did i do wrong?
Sebastian

Do you have wireless PC's ? are they able to go online ?
enable network security and also change the beacon to 50 and the RTS and fragmentation threshold by 40 each under the advanced wireless settings.

WRT54G wireless not working after upgrading to windows vista, please help

Hello everyone....
I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
I just bought a new wireless web camera and that does not work either because the wireless is not working.
Any suggestions on what I should do to solve this issue?
I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
Hope to hear from someone.

I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

WRT54G Wireless - Xbox 360

Converting/upgrading router to WRT54G wireless. All PCs working fine with upgrade, but Xbox 360 connects, then fails IP test.
If I remove security from the WRT54G, the Xbox connects completely and just fine, but when I reactivate security--either WEP or WPA security--Xbox no longer receives a valid IP address from DHCP, so I can't connect.
I've entered and reentered the appropriate security password at the Xbox, so it's not simply a typo on the password. I've also reset-to-factory-default and powercycled until I'm practically blue in the face. I've also tried disabling DHCP and setting a fixed IP at the Xbox and disabling UPnP. I've also used the Windows Connect function to download wireless settings from a working PC, as Xbox explicitly recommends in its instructions.
Help?

Many thanks for the reply. Does it seem as odd to you as it does to me that one should have to go through all that for what Xbox calls a "compatible router"?
In any event, Xbox tech support has done nothing to distinguish themselves in my eyes. Amongst their bad advice: "the Xbox wireless network adapter is bad"; "you're too far away from the router"--both blown away when I successfully connected to Xbox Live via my neighbor's unsecured router located much further away than my router.
Anyway, I devised the following work-around: knowing that my Xbox 360 connected fine to Xbox Live with my router unsecured, I kept the security off and opted for MAC address wireless filtering, which lets only specified MAC addresses connect to the router. As soon as I entered the Xbox 360's MAC address and saved the settings, we could connect to Xbox Live without any hesitation. I of course had to track down all the MAC addresses for our other devices, but once that was done, everything seems to be fine.
Now, the trick is never to do anything that will change any device's MAC address...
Again, this is a work-around, not a solution to the problem of why the secured WRT54G was failing to recognize the Xbox 360 under either WEP or WPA-Personal.

Tried to update WRT54G wireless router, upgrade failed, router broken.

I tried to upgrade my new WRT54G wireless router with the new firmware. I got an error message that said "Upgrade are failed". I used the correct version of the firmware for my router (I have a Ver 8). I tried to factory reset, but the router is still broken. Any suggestions on what I could do? The entire page I access via IP is broken. All the text is messed up the the links don't work. I can use the router to access my network, but it will not connect to the Internet at all.
Message Edited by Trax416 on 02-05-2008 01:05 PM

I have no firewalls, and it's for sure not a computer related problem. I have tried on three seperate computers. The upgrade failed, it won't let me access the setup page. I have tried to go onto the Internet since, and it lets me, but 80 percent of all Internet sites don't work. This is what shows up in the router firmware page when I go thru the IP. ýýý†††···ÇÇÇ¶¶¶¼¼¼öööiiiSSS¿¿¿ÂÂÂßßßààà´´´¯¯¯***^^^uuuAAAllØhhÐééé²²²äää–––ÃÃÃBBBâââmmm¾¾¾DDDWWW˜˜˜“““ìììÎÎÎ LLLaaajjÓyyy ¸¸¸ÝÝÝøøøÉÉÉãããÞÞÞ:::×××ÓÓÓkkk’’’nnn™™™³³³©©©ççç œœœxxx~~~ÁÁÁffÍ```ggÍ CCCiiÐ‘‘‘ ŠŠŠ@@@žžž YYYµµµÐÐÐªªª¥¥¥??9èèè___ÆÆÆ‰‰‰ÜÜÜšššÒÒÒ¨¨¨¡¡¡vvváááØØØÙÙÙƒƒƒTTT$$$ÍÍÍŒŒŒÚÚÚÔÔÔ••• ËËËÅÅÅëëëººº‚‚‚°°°|||}}}jjÕVVV„„„\\\]]]rrrbbÅ??;ŸŸŸ[[¶»»»[[[%%IGGG???eeË£££ííí‡‡‡fffooÝOO __¾kkÕGGŽ``Á88oddÇKK•CC†hhÏîîî±±±>>|SS¦77mÛÛÛæææpppÖÖÖ®®®ÈÈÈHH êêê??)ÌÌÌÊÊÊÄÄÄ????:llÙZZ²ŽŽŽWW®99q;;vAA‚ÿÿÿffÌ Message The rest of the pages in the setup menu ether show up blank, or give the same message as above.
Message Edited by Trax416 on 02-05-2008 01:35 PM

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

WRT54GS v2.1 Firmware upgraded and wireless will not work

Hi Everyone,
I have a WRT54GS v2.1 wireless g broadband router. I updated the firmware WRT54GSv3_4.71.4.001_fw.bin since that was what the linksys website said i needed. After updating the firmware on the router, my two laptops can see the router but are not able to connect to it. If I connect through the ethernet cord, then I can get online and access the admin page of the router. I have no clue if a setting got messed up or the firmware caused it to go nuts. Please let me know if someone knows anything.
Thanks
Delta

After you upgrade the firmware you are to reset the router by pressing the reset switch in back for 30 seconds. When done, power cycle the router. Now you must reconfigure the routers wireless settings as they are all gone. Make sure the security settings on the router match your wireless settings.
Go here for help.

I installed the WRT54G Wireless router on my desktop and...

I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months. Last week I uninstalled Norton Internet Security and installed ESET Smart Security. Now my desktop cannot get to the internet and the advisor says it does not detect a router. But my laptop says it's connected to my network and I am able to use the intenet on it. The router itself has all of the correct connecions and the appropiate lights are lit. Could the ESET Smart Security Software have messed up my router firmware. Please advise.

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time

I have been using WRT54G wireless broadband router and WU...

I have been using WRT54G wireless broadband router and WUSB54G on my home PC for the last 2 years. It was working fine until recently I encountered serious connection problem.
The WUSB54G cannot connect with WRT54G.
Error message " Cannot assocaite with the access point.
I have checked the followings to try and solve the problem.
1) Refresh site survey the WUSB54G does not show my SSID, but it can show my neighbour'sSSID.
3) When I use my notebook with built-in wireless network adaptor to access wirelss broadband there is no problem at all. I can access my SSID.
4) I have try reseting the WRT54G and changing password but still can not solve the problem.
5) Uninstall and re-install
5) I have installed a new USB adapter (WUSB54GG) thinking that it could be the old WUSB54G is faulty. But still encounter same problem.
I am using Window XP Professional. What could be the problem?
Please provide your professional advice. Thank you.

Hi, Try to update firmware of router. You can get latest version from www.linksys.com/download, Hope it will help you

Linksys WRT54G Wireless-G Router Not working

I have a Linksys WRT54G Wireless-G Router and it has worked good for a couple months and yesterday it stopped. When I plug it in all the lights are lit even though there arent any ethernet cables connected and the power light blinks constantly. I tried holding the reset button on the back and it didnt help. Anyone know whats wrong or anything I can try to fix it?

You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

WRT54G wireless router irregularly drops connection

I've had a WRT54G wireless for about 3.5 years now, with a Motorolla SB4200 cable modem connected to it to provide internet service. The router itself is connected to a desktop PC and there are two laptops that are connected to it wirelessly, one of the laptops is old and has a Linksys PCMCIA wireless card and the other laptop has wireless built in to it.
I updated to the latest firmware for the router.
For more than a year now, the wireless connection has been irregularly dropping. Sometimes it will reconnect instantly, sometimes it will take a few minutes to reconnect, sometimes it will take up to 10 minutes. More importantly, the connection drops very irregularly. Sometimes it will work for weeks flawlessly and sometimes it will constantly drop several days in a row.
Today I haven't had any problems so far, but yesterday and the day before, it was dropping a lot. What I've noticed is it mostly happens in the evening, so I'm assuming maybe there is some kind of interference.
I have been told that wireless routers do have a limited lifespan and that mine probably is just wearing out and needs to be replaced, so I picked up a new WRT54G router for $50 yesterday, however, I haven't opened it yet.
Is it likely that my router is just wearing out and needs to be replaced, or is there some kind of interference going on? I am able to pick up a number of different wireless signals from the neighbors, but they are always there. Even right now as I am connected to the network typing up this message.
Any feedback would be greatly appreciated.

Thanks for all your help wehowardjr.
I haven't actually pressed the reset button in a while, but I did unplug it for about 20 seconds then replug it just two days ago.
What is the nvram and exactly how do I clear it? I don't think I've ever doe that.
I use a laptop that has the wireless built in and I'm the one who uses the computer the most in the house, so I am the one who is noticing the connection dropping the most, so I'm not really sure if it is the problem with the laptop witht he PCMCIA card.
I'm surprised version 6 has problems. I would have assumed that it would be a great improvement over previous models, especially 1.0. I guess I should return it to the store then? Isn't there version 7 out now?

WRT54G Wireless router works on desktop, but not laptop

I have a WRT54G wireless router with version 1.00.4
It works on my desktop, I can log into the net no prob
My laptop however (dell w/ windows xp) does not even recognize it.
Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
My desktop is windows xp, and so is my router.
Any helpwould be greatly appreciated.

i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
1.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
2.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
hope this will help you...
~ lyf_R_foeittee ;o) ~~

HI I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7. NOW I W...

HI
I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7.
NOW I WANTED TO UPGRADE THE FIRMWARE.
I CHCAKED OUT THE SITE I COULD'NT FIND THE DRIVERS FOR THE VER 7
EVERYTHING ELSE OTHER THAN VER 7 IS PRESENT ON SITE I WANTED TO CHEAK OUT WHEATHER THE VER 7 FIRMWARE ARE AVALIABLE OR NOT PLEASE HELP ME TO DO SO
THANKS
PRAVIN

hi helm
Thanks a lot for your suggestion i got the required farmware
thanks
prav

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

Slow speed with WRT54GS Wireless-G router

I have install a WRT54GS wireless router.
Since then my download speed on my pc (the one directly connect with the router) has come down from 4mb to 1mb.
If I connect the modem directly to the pc I get 4mb but when i connect the wireless router between them it goes down to 1mb.
I have call tech support, upgrade to version 1.52.0 but nothing change.
I have try it without a firewall and get the same result
One thing I have notice, when I do a tweak test at http://www.dslreports.com my RWIN without the router is 56000
If I connect the router is show 9800 even if my PC who as XP is set to 56000
Thanks

Check for latest firmware and upgrade if necessary. Then do a factory reset.
Help fight lag! Wire up that gaming machine!!!!!

Is my router failing? - WRT54G wireless-G firmware v.8

Similar Messages

Maybe you are looking for