Is my SB Live! Value soundcard ASIO compatib

Is my Creative SB Li've! Value soundcard ASIO compatible?

Propably?
Anyway, you could try
kX Project drivers - http://kb.kxproject.lugosoft.com/list.html
or
Asio4All drivers - http://www.asio4all.com (not a nati've ASIO driver ...)
jutapa

Similar Messages

Which shoul i use? realtek alc 650 or sb live value?

yah i haven't found any decent comparisons or reviews that pit these two sound controllers together and i'm hoping that someone could possibly answer this for me . . .
i have the soundblaster live! value card and there's the realtek alc 650 sound controller on my mobo . . . which one of these two do u guys think is better to use?
can someone compare the two? like which one uses more cpu load, sound quality, etc . . .

Yes ... I am having problems having sound in my video capture ... I downloaded the new SB Live drivers for XP and I found the extraction in my one of the local settings folder. I've tried different ways to acquire sound in my video captures.
I switched back to the SB Live Value card a few hours ago.
I've got sound now but kind of hit and miss.
I use a Maxtor ATA 133 card and have four ATA 133 60 GB drives sitting on the bottom of my tower. Plus a 40GB and 60GB mounted normallly. I do use the KT4V-L mobo and the XP 2500-Barton.
HP 9100 cd writer and Sony DRU-500a DVD Burner.
I'm using the LAN on board for DSL.
FANS: One is mounted in back ... I cut the holes out to increase air flow.
Another fan is mounted on side panel ... shooting outside air towards my CPU.
RAM is one stick of Kingston KVR333X64C25/512 DDR Ram
BIOS setting is FSB 166 setting.
System - Mouse hasn't froze up yet ... when it does happen I usually here a small faint sound ... "ping"-"poing" and then the mouse is moves again. Audio and video playback is also affected when this happens.
I've changed my swap file to one of my 60 GB ATA 133 drives only. Setting is 1000 MB and C-Drive is not included.
I'm really frustated with this freezing up problem. I've got too many new parts to figure out what is wrong.
WIN XP - KT4V-L MOBO - and new DDR ram are all installed in same time period.
Any suggestions?? ... Mouse hasn't froze up yet after changing Swap file settings.
Have you been to the Black Viper website ???
What do you mean by "Surround Mixer 2" are you refering to the baby blue mixer I saw a few days ago. I liked the old mixer more.
Quote
Originally posted by Meseriashu
Realtek alc 650 looks impressive - has all the enviroment efects that SB Live! has, six channels output, support for EAX and all. But there is a diference: while your Value SB Live! does have a big support in hardware for them, the realtek onboard sound is very software depending. And the quality of the effects is incomparable. And there are the SoundFonts that you can use. Did you try your SB Live! with the XP drivers (with Surround Mixer 2)?
Someone said about not beeing able to run 3dmark03 sound test with the realtek - right! the SB Live! has 32 hardware voices, can take a much more number of audio inputs (if you have some 5Ghz CPU u can run about 32 winamps at the same time ).
Hmm but you have a VIA... that has problems with SB Live!
I have also, but only in 9x, in XP is working smooth.
About the latency - you can get very close to real time if you install the ASIO drivers but the KK Mixer sucks.
Go Creative ) Still awaiting my Audigy 2 Bulk...

HPE-400Y Soundcard ASIO compliant?

Is the HP Pavilion Elite HPE-440y factory installed soundcard ASIO compatable?

I'm giving this a bump.
I know my crackling problem is old news.
But does anybody have any ideas about the card offering 4090 buffer sizes to a thrid party program and thus practically freezing it's
Message Edited by gracemusic on 0-0-2009 :5 PMMessage Edited by gracemusic on 0-0-2009 :5 [email protected]

Drivers needed for Sound Blaster LIVE VALUE - Model 4780

I had to move my SB Live Value card model 4780 S/N 4780210008722, to another computer and require new drivers for the SB card which has a gaming port.
I have a 3.0 gig IBM Think Center box using Windows XP SP2.
I tried the DOWNLOAD area Creative provided but found the information very confusing as to what drivers and patches to download. First it said to download except if I did not have the original installation drivers (which I don't have), but then it says to download the drivers as an upgrade.
Again, they don't address clearly what I should download for a basic installation which includes use of the game port for use with flying type software. I have 2-3 joysticks consoles i'd like to use on my newer computer using the CT 4780 SB card.

Look at your Private Messages on the top of the site.

SB Live Value on K7N2 Delta L

I've just installed my new system which consists of the following components:
- K7N2 Delta L
- XP 1800+ @ 1833 MHz / 333MHz FSB
- MSI GF FX5600 / 256MB RAM
- Kingston PC 3500 HyperX (2x 256MB @ dual channel mode)
- OS: Win2000 / Service Pack 3
- Soundblaster Live! Value (latest Win2k - drivers)
Everything is running fine but I can hear a strange background noise watching DVDs or Playing Nascar2003.
I imagine that the noise is especially strong when the CPU activity is very high.
The Win2k hardware profile shows that the soundcard and the Display are using the same IRQ (11) but I don't know how to give them seperate IRQs
Thanks for your help!
Daniel V.

Raven likely is right - you can narrow this down to 3 possibilities:
1) The PSU is not strong enough to run a high end proc / mobo / DDR / GF4 FX vid and drives - that sound you here could be all that is left for you sound card to suck and use - that likely is doing damage to your Mobo and Proc - AMD and MSI recommends at least 350W for this reason - the generic PSU don’t have enough amps to push all these devices and the system itself - your choice if you want to damage your system
2) The IRQ issue worries me too - this means that you likely have assigned IRQ's in your BIOS - therefore this may just be the beginning of your issues - you will likely have Vid Card issues with certain applications and games - I would resolve this issue
3) What drivers are you running on the Video / Sound cards - try a different driver, if 3rd party - try default - if default - try third party - sometimes a different driver can make all the difference
Note for a XP1800+ runs at 1533mhz not 1833mhz - make sure your BIOS is setup correctly for this - that could also cause you issues unless you have some high end cooling to combat the heat - also check your FSB/ram settings this may also causing some issues
But overall - I think Raven is right - your PSU will be doing more harm than good

Sounblaster live value 5.1 digital freezes sys

Hey, I am having trouble with my sounblaster li've value 5. digital (model # ct4780), everytime that I try to install it, my system will boot ok, windows will recognize the hardware and then everything will freeze completely. I am sure that it is not a conflict (at least on one of the machines) because it used to work on the one machine (and I have not done any hardware changes). But, I tried switching it to another system and it would just freeze. I tried switching it back and the same thing happens.... Any suggestions other than chucking the thing?

I guess you got what you paid for... reffering to the motherboard
I cannot give you direct links but you can Google for AuzenTech X-Mystique, X-Plosion or for Turtle Beach Montego DDL... You will need a PCI slot thou, and those are not hardware accelerated soundcards (like the most of Creative ones) so they will eat some of CPU usage. How much - depends of your CPU power, of course. Your present card anyway, has no hardware acceleration so is ok I guess...
Another solution would be to add the Creative DTS li've encoder (I don't think is worth the investement for your crappy Li've24bit): http://us.creative.com/products/prod...y=6&product=49
I don't know of any USB solutions for this.
Message Edited by SoNic2367 on 06-07-2006 2:02 AM

Does the Weblogic JMS implementation use the Time-To-Live values?

          I am trying to send a message to a Queue with a time-to-live. The only way that
          I can get this to work is by going into the console, and setting a default value
          on either the Queue or the connection factory. But this is not the behavior I
          want. I would like to do this programmatically instead so it can be property
          driven and a Sys Admin can change it easily.
          I downloaded the JMS spec and saw that you are supposed to set the time to live
          when calling the MessageProducer's send message. I did this, but it doesn't work.
          Is anybody else having this problem? Does Weblogic's JMS implementation just
          ignore this value? Or do I have my Queues and other JMS components set up incorrectly?
          P.S. All of my time-to-live overrides are set to -1 in the console, so my time
          to live set in the program should be respected.


          Tom,
          I was able to track it down to a programming error. Thanks for your help.
          Dan
          Tom Barnes <[email protected]> wrote:
          >Hi Daniel,
          >
          >Yes, client-specified message expiration works. I suspect
          >a programming error. First take a look and make sure that you are
          >not making the common mistake of trying to set the value
          >directly on the message, rather than on the producer - as per
          >the JMS spec and JMS javadoc, setting this value directly
          >on message will have no effect as the producer's value
          >will always override it. If this isn't the case,
          >please post your code and I'll take a look.
          >
          >FYI Note that all management fields can be programmatically
          >set as well. Since you want programmatic administrative
          >control, this means that you have the option of
          >programmatically configuring the destination's time-to-live
          >override field if you so wish.
          >
          >Tom
          >
          >Daniel Livesay wrote:
          >
          >> I am trying to send a message to a Queue with a time-to-live. The
          >only way that
          >> I can get this to work is by going into the console, and setting a
          >default value
          >> on either the Queue or the connection factory. But this is not the
          >behavior I
          >> want. I would like to do this programmatically instead so it can be
          >property
          >> driven and a Sys Admin can change it easily.
          >>
          >> I downloaded the JMS spec and saw that you are supposed to set the
          >time to live
          >> when calling the MessageProducer's send message. I did this, but it
          >doesn't work.
          >> Is anybody else having this problem? Does Weblogic's JMS implementation
          >just
          >> ignore this value? Or do I have my Queues and other JMS components
          >set up incorrectly?
          >>
          >> P.S. All of my time-to-live overrides are set to -1 in the console,
          >so my time
          >> to live set in the program should be respected.
          >

Soundblaster live value cannot install at

Hi
I have recently bought a new PC that has onboard sound, however i want a full duplex soundcard for chatting over the net.
I had a soundblaster li've value in my old pc which i thought would do the trick so installed it but i cannot get any sound at all from it...the old soundcard is from 2000 but worked ok in my old pc
This is what i have done
. Changed the BIOS from EDB to PCI bus for audio
2. Disabled AC 97 sound in Bios(which i presume is to disable the audio onboard)
3. Set IRQ 5 to legacy as per the common problems on this site
4. Installed the soundblaster unidrv pack downloaded from this site.
5. Installed the creative play center then upgrade to 3
With the drivers installed the hardware is recognised and even diagnostics says all components are available but i get zero sound, not even the crackle when you plug/unplus the speaker jacks at any point. If i try to run the speaker test it causes the pc to freeze, which i have tried several times, both before and after a cleansweep installation sequentially . The my system.hardware says i have the soundblaster components correctly installed and they are working fine, just no sound.As soon as i take it out and switch back to my onboard sound i have no problems.
i have also noticed i get a error when i try to view the properties on the lmedia control devices option...the program shuts down rather than freezes which has only happened since i tried using the soundblaster as far as i remember, and then the whole device manager crashes
My system is a Athlong 64 bit 3400+ on a Winfast K8S motherboard
If this card is not compatible then what sound card would work with no problems (ie a more modern one)
I have read all the help on this site on these messages but nothing seems to work...is their something obvious i am missing?

Thank you for your suggestion. Unfortunately, Dell doesn't have any updates for me. I have a Dimension XPS B series computer and they don't offer any updates for SoundBlaster Li've! cards on their site. I just wish I could run the driver update file from the SoundBlaster website (DrvUniPac). It begins extracting but then says there is no SoundBlaster Product on my system, and then closes. As I mentioned before I tried the Auto Update from the SoundBlaster website and it detects the SoundBlaster Li've! Value card on my system and says that it is up to date. Why doesn't the driver update recognize my sound card?

Soundblaster Live Value D

Hello, I have a soundcard from my old Dell system that has the orange digital out, black rear, green front, and the two inputs. I have?a Logitech 5 speaker system (two rears, two fronts, center and sub) so I have the 3 connectprs from that speaker system plugged into the corresponding jacks on the soundcard. I CAN NOT for the life of me get the orange connector to switch over to analog so I can use it for my center channel.. ANY ideas on how to get this to work... I have tried SOOO many different versions of drivers and software with NO luck. PLEASE HELP!!? Thanks

The Li've! Value is a 4 channel soundcard, meaning it support up to 4/4. speaker system. As you mention in your post too, that orange jack from the soundcard is a digital out jack. It isn't meant for connecting center/subwoofer.
Jason

Sb live value and dos games

i can't find any dos utility that is supposed to be in the creative sblaster li've value installation cd. i've just downgraded my os recently from win2000 to win98SE just to re-li've the glory of dos games again that started the whole evolution anyway...but there's no sound and the games can't detect my sb li've? anybody got any clues ?

Hey, sunburst_ivan,
You may not like to hear this. You can search around and get the old dosdrv folder and st it up with dos cdrom drivers, dos mouse drivers, and run it either from a boot disc or by specifying a new Ms-Dos configuration in the game's property's Program tab. These are better solutions than the way the Li'veWare setup does it because the dos drivers won't be loading all the time with Windows and possibly conflicting. The Ali've! site used to have an article with a link to them, and I think driverguide.com has them as well. You can also find a driver set there that is the last vxd set provided in Li'veWare 3.0 that included good dos within Windows drivers. (Just go into device manager and check the box to allow LPT Interupt Sharing to avoid conflicts.)
But, by all means consider that all the hastle is not worth it or necessary in order to play your old games. You can now use any soundcard and Windows XP and play nearly all old dosgames perfectly. Nothing wrong with the Li've! cards. You can use the Li've Uni-Pack driver or the kXProject drivers depending on what you want the card's emphasis to be. (kXProject if you don't mind no EAX, the official drivers for ease of use and still pretty good sounding music.) And, as I said you are not limited to just the Li've! this way. Any newer (better) card will work too.
Lots of information can be found on the vogons.zetafleet.com website. (VOGONS-Very Old Games!) Dosbox with the D-Fend frontend (GUI), and vdmsound are all you need. Use vdmsound if the game works to your satisfction with it. If not, then as far as the games are concerned when running within the Dosbox program they are on MS-DOS 5.0 with nearly any soundcard, video, mouse, joystick, memory configuration they require. It is emulating the whole computer and hardware and drivers, etc. for you with no fuss on your part. Games think they have 640K conventional memory! (There's a box to check in D-Fend to limit this if the game thinks this much memory is impossible and refuses to run.)
So, do what you will. I think you'd spend less time tinkering and more time playing by doing it my way.

When peeking for messages, the time to live value seems not to be set. Is this a bug?

I asked this question first on stackoverflow here:
http://stackoverflow.com/questions/20608061/how-can-i-automatically-expire-messages-on-an-azure-service-bus-subscription
I think this might be a bug.
Steps to reproduce with Service Bus Explorer 2.2.1.0
Connect to a Service Bus Namespace on azure
Create a new topic "MyTopic"
Create a subscription "Log" under the topic and set the Default Message Time to Live to 5 days.
Right click on the MyTopic topic node and choose "Send messages"
On the "Send messages to MyTopic" screen: click "Start"
Click the "Log" subscription node
Click the "Messages" button and choose Peek 10
Click the message in the list
Look at the TimeToLive field in the "Message Properties" area
The value is is 10675199.02:48:05.4775807. I would have expected a value 5.00:00:00 there.

Hello,
I got an update from Service Bus Product Group:
This behavior is currently by design and should be seen independent of SDK version: the effective TTL is the minimum TTL of message and entity and is checked at runtime, rather than imprinted on the message at enqueue time (because the entity-level TTL
could be changed at any time after messages were enqueued). The documentation is misleading and should be fixed.
If you have any questions or concerns, please let me know.
Best Regards,
Bruno.

How can I use a webcam to feed live values (or even better, an average of said values over time) into a subVI?

The values will be read from a digital measurement device, so there shouldn't be much of a problem in recognizing the fonts, I hope.
Ideally, it'd function like this: Webcam is trained on device, and without interaction from the user, labview processes the current data every 30 seconds, converts it to a string, and averages 30-second values over a period of 5 minutes. The average is then given to a VI that would normally poll the user for a value every 5 minutes. I'm trying to close the loop on a control system, and think this is the best way to do it.

If I understand this correctly, you would like to take a picture of a screen every 30 seconds and read some text on that screen. You can do that using the NI Vision Development Module's Optical Character Recognition function palette. This will allow you to create a set of images of each character that you expect to read. You can then train the software to assositate an image of that character with the actual digital character. In this way, the software will be able to read the text. You can read more about this concept in the NI Vision Concepts Help 2013 manual.
Is there any other way to transfer the information from the first computer to the second computer other than using a camera to read the text off a screen? That seems like a strange way to transfer data, but it's possible that you don't have access to the code on the first computer and you can only access it from the front panel. Is that the situation that you are in?
Take care,
Jeremy P.
Applications Engineer
National Instruments

Problem setup with DB Live Value and win 9

Hi
I try to clean an old PC with win 98 SE and a SB Li've Value (CT4830) but I have lost the original CD but I found
the last upgrade on creative site (sblw9xup.exe).
But when I launch sblw9xup.exe , it says that it recognizes no sound blaster card and exit
I have tried to change the the PCI slot in the PC but it is the same thing.
Now the detail when I start windows:
- First I have a windows that says (I translate): New device detected, I am looking for new driver for PCI Early
non-VGA Device
- Then news windows to install a driver for this devi've. It doesn't work but probably it is normal.
- Then I have a windows that says (I translate): New device detected, I am looking for new driver for PCI Input
controller
- Then news windows to install a driver for this devi've. It doesn't work but probably it is normal.
Then I launch sblw9xup.exe and it says that it recognizes no sound blaster card and exit
Have you an idea ?
Thanks

Part
http://www.megaupload.com/?d=24B0A8F
Part2
http://www.megaupload.com/?d=24YEBDV
Download both part and 2 to the same folder and then unrar and burn the ISO.

S/B Live Value Dell OEM CT4

Calling all expertsI have a Sound Blaster Value Dell OEM? CT4780 card that I kept from my old Dell Dimension XPS T500. I?built a budget PC using an MSI? MS-6533XG mobo with P4. 2.8GHz Northwood 533 FSB.Using?XP Pro SP2? and Altec Lansing ADA880 speakers.
The original Dell drivers?need replacing. The old Dell had an SPDIF feeding the Sub-Woofer. I no longer have the SPDIF source.Does any one know which drivers will get my sound up and running.

Did you check dell's web site?

Live Value card muting my

[size="3" face="Comic Sans MS">I have been using a Soundblaster Li've Value card for quite a while now, with an annoying glitch in it.I do a lot of golfing on-line, with voice conversations via Messenger or Skype. Once in a while, I will lose my mic (maybe once every couple of days), but will still be able to hear the other person. When I go to my volume control panel, my mic will be muted. I can take the check mark out, and the mic will be li've again for internal things. However, I still won't be able to talk outside the computer. Closing and reopening the App doesn't fix the problem. I have to reboot the computer. I've tried Windows Messenger, MSN Messenger and Skype with the same result. I've tried 2 different Li've Value cards, with the original drivers from the CD, the latest Li've Dri've Unipack, and the Windows drivers. Always the same thing. My System:
ECS PT800CE-A Mobo BIOS .E (latest)
P4 3.0G CPU 800FSB (hyperthreading acti've)
Windows XP Pro SP2
RAM Gig (2X52) DDR400
Chipset VIA VT8237 4 in driver v 4..00.332
HDD Maxtor 6Y20P0 20G 7200 RPM Pri IDE Master
Optical Dri've AOpen DUW 608/ARR Sec IDE Master
Video Card NVidia FX5200 53.03 driver (best for Links 2003)
Sound Card Soundblaster Li've Value (presently using latest Li'veDrvUniPack)
[size="3" face="Comic Sans MS">Has anyone run into this problem, and is there a fix for it's? I'm about ready to go buy a Turtle Beach Riviera card to try that, but I thought I would check here first. You never know. I would appreciate any help you can give me.
[size="3" face="Comic Sans MS">Thanks. Bill.

Tried lowering the audio hardware acceleration. Seemed to help the problem, but just for a little while. The game still "distorts itself to death" apparently. I have no clue what could be causing this. Any ideas? Anyone?

Is my SB Live! Value soundcard ASIO compatib

Similar Messages

Maybe you are looking for