Is MySQL component part of standard RHEL installation?

I have a query if MySQL component is part of a standard RHEL installation or it is installed additionally as an RPM? There was a security analysis run on one server which has RHEL 5.8 installed and it is showing security vulnerabilities with respect to MySQL such as CVE-2012-2750, CVE-2012-3163 etc. The vulnerability solution in the security report is showing solutions like:
1) Download and apply the upgrade from: http://downloads.mysql.com/archives.php
2) Download and apply the upgrade from: http://dev.mysql.com/downloads/mysql
I had put the request in the Oracle forum but there was a mistake with my question. Request you to please revert.
Regards

Thanks for your reply. Is it possible to remove the package installed by default if it is found that it is of no use?
There are few observations with the 2 links I posted, in the link,
http://downloads.mysql.com/archives.php
it is difficult to figure out which update to apply as it is giving a whole lot of product versions and in the other link, it is giving reference mainly to one particular version of the product, MySQL Community Server 5.6.14 which may not be the version to apply.
I was wondering how to upgrade from these links if these links are not showing something specific.
Request you to please revert.
Regards

Similar Messages

  • Fetch Open PO's based on component part numbers (BOM)

    Hi All,
    I need to fetch Open PO's based on component part numbers (BOM).
    Is there any standard FM or any T-Code or program to achieve this?

    Hi All,
    I need to fetch Open PO's based on component part numbers (BOM).
    Is there any standard FM or any T-Code or program to achieve this?

  • Is Perl part of default Solaris Installation ?

    I am devloping an application which invokes a few perl scripts during installation. I just want to know:
    Is Perl part of default/standard Solaris Installation ?
    How safe is it to assume existence of Perl on client-side Solaris System?
    Thanks & Regards,
    Satish

    Perl has been in Solaris in /usr/bin since Solaris 8. I am not completely certain, but I believe it is included in all metaclusters including the minimal Core cluster.
    Richard

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • Entity not saved inside custom component embedded in standard view

    Hi ,
    I have embedded a custom component inside a standard component. The custom component has two views. The first view is assigned to the item overview page and the second view is assigned to the main window of the standard component.
    I have enhanced the BOL model (using EEWB) and created a new entity with z structure.
    There is a button in the first view which is used to navigate to the second view. The custom fields are filled up in the second view.
    Even though I am able to fill up the custom fields in the second view, these fields are not getting saved when I save the main transaction.
    However, If I fill up the fields from the first view ( ie the overview page ) , these are getting saved.
    Please let me know if you have any solution. This would be very helpful.
    Regards,
    Jaydip

    Hi Anubhav,
       I have created the Custom Component(zso_disclaimer)  with the BOL Object BTAdminH. I have used few fields which is available in the BTAdminH(ZZDISC_WAR_ID,ZZACC_EX_CONT,ZZACCEPT_WAR and ZZFLD00004G). I have used this custom component(zso_disclaimer) in the standard conponent BT115H_SLSO as Assignment block. when i enter the values in the fields and press enter the values get disappears. So i am not able to proceed further. Can anyone help me to solve this problem.
    Thanks & Regards,
    Ashok.

  • Standard queries installation

    Hi,
                My requirement is only standard queries installation.
               can i install particular infoarea ,infocubes and all????in my se09 having only query requests and infoarea shows "NODEISNOTCONNECTED"
    Can you suggest me. what is the procedure
    Regards,
    devi

    Hi Devi
    Before answering the question the following are the tweaks that are in mind
    Is it the requirement that business wants only the standard content queries related to particular info area..???
    If yes  and the system is greenfield one(assuming new system)
    please follow the below steps...
    Choose grouping as only necessary and then collection mode automatically and then flag the objects and install it in back ground.
    Just ensure that you have placed the match or copy option it it is not a green field system..
    Here is the link for BI content installation  procedure [Installing Business Content|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm]
    Hope its clear a little..!
    Thanks
    K M R
    ***"Make everything as simple as possible, but not simpler." Albert Einstein. ****
    devi wrote:
    hi Suman,
    >
    >                     ok..Install before ,the transfer and update rules are also installed right?but i won't have much idea intosap bw 3.5....
    > in this situation what can i do???
    >
    >
    > Regards
    > devi

  • Is Microsoft Office 2007 Standard 64bit installer is available?????

    Is Microsoft Office 2007 Standard 64bit installer is available????? if available, can you provide me download link to download 64 bit office 2007 standard edition...

    Hello, we do not provide download links to proprietary software. That would be considered piracy. 
    You can however, purchase it HERE.

  • Is it possible to deconstruct an existing video to get its component parts?

    I made a video http://gallery.mac.com/lorna6#100193 years ago from footage taken in about 2000 and 2001. In a prior thread I mentioned having somehow losing the AUDIO component. Well, disturbingly, I went and watched the video from my old iMovie '06 and discovered that it was the video clips that were missing, not the audio. In the picture below, those black frames represent no video to be seen. I think that the exclamation mark in the yellow circle means the same thing or that something went awry.
    Here is a picture of the clips in the work space part -- the upper left quadrant, of my iMovie '06 project.
    To clarify: I forgot how I made that video because it was so long ago. I know from reading about iMovie '09 that I will probably do more videos on it because it sounds less complex but equally good for the most part.
    Someone in this forum, John, encouraged me to go over the highlights of that old video using the iMovie '09 program and I liked that idea........ so you can imagine my dismay when I returned to the program, opened it up, and now see that I lack not the audio, but the most precious video.
    Sadly, the original footage is lost due to external hard drive crashes. I might have kept a memory chip that had it but after all these years and me being disorganized, I do not know where it is.
    Is there a way that I can use the iMovie 06 video that you see at my Mobile Me Gallery to extract the clips and the audio? Or if not the audio, then at least all of the video clips? *Is it possible to deconstruct an existing video to get its component parts?*
    ~L

    I have had a series of iMovie applications but I used them all too infrequently, partly out of Fear of Trying. Now with the iMovie '09 out, I think I can do it. Yes, I know that I made the Cheyenne video with a previous app, but I found it confusing at times, and look now and see how I bollixed it up, losing some clips in ways I do not know.
    You (John C.) wrote:
    That's a miniDV camera, which uses tape. It's very similar to my earlier camera, as listed in my details below - the Sony DCR-TRV20. I now mainly use a high definition AVCHD Sony HDR-SR7 - that's why I've switched from iMovie HD 6 to iMovie '09.
    .......... Lorna says ...........................
    John, I call that a Pandoa's Box paragraph up there! First of all, I am left thinking that the type of videocam that I use will determine which kind of iMovie application I use. Yes? Can I assume that since you with your Sony DC-TRV20 have high definition AVCHD, then my DC-TRV11 might also have it.
    I have my user manual in front of me and looked in the Index for both HD and AVC (what is the C in AVC?), and neither is listed. I cannot find anywhere in the manual that tells whether my mini digital TRV11 also has high def AVDHC.
    How important is that in using the new iMovie '09? If my Sony does not have it, then does that simply mean that I cannot make use of the HD capability of iMovie '09?
    All of this would have been a moot question because earlier I had decided to just use the video component in my Canon digital camera, but then getting my Sony mini digital out and seeing and touching it, and remembering it worked, I began thinking that maybe I should use the camera video for when I am away from home and the Sony for when I am here at home.
    There is one thing I would say about HD: It is a memory gobbler, and if you make videos for YouTube, you might feel the constraints within that platform. It might be better for showing things to family and friends on your home tv with no megabyte or time restrictions.
    You/John C. continued writing:
    Your thoughts on archiving and backup sound sensible Lorna. I must admit, I don't backup as often as I should. I've been using the old Apple Backup program, but am considering moving to Time Machine, with an appropriate hard drive to match - maybe Time Capsule like you are using.
    .......... Lorna says ...........................
    John,if you decide to get Time Capsule to work wirelessly and continuously with Time Machine, then I suggest you consider a 2 terabyte capacity. I began using the Apple Back up but found it confusing and ultimately insufficient.
    You/John C continued writing:
    Currently (as listed below), I have 4 external hard drives - 3 are FireWire 400 and the largest one is FW 800. None of these has ever given me a problem (touch wood) - they are LaCie 120GB (not your favourite!), and 3 Maxtor's - 250GB, 300GB and 1TB. The 1TB drive is RAID enabled, having two 500GB drives in the enclosure, which I'm effectively using as one drive, that is, one is not a mirror of the other - so if one fails I've lost all the data! A good reason for using Time Machine.
    .......... Lorna says ...........................
    John I still am not clear on what RAID is and I guess I will Google it to find out. What is the purpose of having two separate drives housed in a shell? Is it about saving space? Or is it about ports? Or what?
    Of course, if you get the one that was mentioned by someone earlier, than it would warn you when something is about to go wrong and you could act pre-emptively. But that was suggested for a business or a pro, neither of which I am.
    You/John C wrote:
    As my HD camera is a hard drive model (60GB), I archive the footage to the Maxtor 1TB drive, using iMovie's "Archive All" feature. From there, it's easy to import clips into an Event, which is also stored on the Maxtor - so double jeopardy! I had better get cracking on updating my backup strategy
    .......... Lorna says ...........................
    I am lost. What do you mean, your HC camera is a hard drive model? And what you wrote sounds like something important that I should understand more precisely. I am thinking that the salesguy at Best Buy was right: I should get yet another hard drive in which to store specifically and only my homemade video stuff, my iTunes, and my photographs. I don't know how I would do that, though, if I want them to be stored ALSO IN MY 2TERABYTE SEAGATE as a double archive.
    -L
    John

  • New SAP NW AS ABAP 7.01 SP03 Unicode with standard sapinst installer (beta)

    Hello community,
    a new SAP NW AS ABAP 7.01 SP03 version with the Standard SAPINST installer (note: the "trial version" is beta!) and optimzed single user memory consumption (~2GB pagefile) is available for testing purposes.
    NOTE: The installation step "LOAD DATABASE" may take up to 8h depending on your harddisk (1h on a fast disk). Next release will install faster.
    Recommended: Use Download Manager
    Please report problems here.
    Best Regards, Oliver

    I have installed the Microsoft loopback adaptor, and I still got asked for a DNS entry.  However I've unchecked it and continued...
    After now several attempts at installing and uninstalling and trying again, I got this on the last attempt - this was after starting a new installation and choosing the 'copy to a new folder' option rather than continuing with the former installation...  (It said 'Please inform the installation development' at the end)
    Caught a known exception during service selection. Errortext: ESAPinstException: error text undefined  Message stack: Opened sylib701_1.dll exe dir is C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919 MessageLib initialized successfully. Opened C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/jre'. exe dir is C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/James/AppData/Local/Temp/sapinst_exe.1420.1236786919/iakdblib701_1.dll  This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 03:27:10  showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 10.10.0.10 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\x. Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI Creating directory C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\log_11_Mar_2009_16_56_41. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'rename' with parameter (C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst, C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst), line (377) in file (syxxcnode.cpp). Copying file C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst to C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst'. Account James-PC/James has ADS path 'WinNT://James-PC/James' James has SID S-1-5-21-3327962229-488744679-1681228067-1000 existence check for user James returned true. inserted account (James, S-1-5-21-3327962229-488744679-1681228067-1000, USER) into the accountcache. Security descriptor of C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst set to O:BAG:S-1-5-21-3327962229-488744679-1681228067-513D:AI(A;ID;FA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;0x1200a9;;;BU)(A;ID;FA;;;S-1-5-21-3327962229-488744679-1681228067-1006) + PROTECTED_DACL_SECURITY_INFORMATION Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'DeleteFile' with parameter (C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst), line (202) in file (synxcfile.cpp). Moving file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst to: C:\sap540A.tmp. System call failed. Error 32 (The process cannot access the file because it is being used by another process. ) in execution of system call 'MoveFileEx' with parameter (C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\dev_sapinst, C:\sap540A.tmp, MOVEFILE_WRITE_THROUGH), line (223) in file (synxcfile.cpp). Unable to delete node C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst with type file: The process cannot access the file because it is being used by another process. Removing file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\log_11_Mar_2009_16_56_41\dev_sapinst. Unable to move or rename node C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/dev_sapinst with type file/directory to C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/log_11_Mar_2009_16_56_41/dev_sapinst: The system cannot find the file specified.  Please inform the installation development, execution will be terminated now.

  • Indesign standard version installation error for Mac OS: "installer failed to initialize.

    Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.

    go to HD>library>application support>adobe>caps and rename the caps folder.
    go to USER library>application support>adobe>OOBE and rename OOBE folder
    install Adobe application manager from below link.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

  • TS2951 I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again

    I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again. How can I resolve this?

    Is your data backed up?
    Are you running any non-Apple system optimization tools?

  • Error when trying to run the rcu.bat file as part of OBIEE 11g installation

    when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
    "windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
    Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
    Thanks
    Manoj

    after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
    please help me finding a solution to this error....
    and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
    can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
    thanks
    Manoj
    Edited by: mkumar on Jun 2, 2011 3:47 AM

  • Looking for cs4 design standard english installer

    looking for cs4 design standard english installer, but i can't find it

    Same as what I see.
    All 10 languages listed on the left (from English - International through to Spanish - North America inclusive) are included in the installers shown in the Mac OS X and Windows columns.
    I think you're interpreting "French and German only" since the download links are vertically centred in their respective boxes and happen to align with the words French and German on the left.

  • Navigating from Custom Component to Standard Compoent(IUICCON). Getting Exception "Define Component Usage 'Random Component Usage of Standard component'"

    Hi Everyone,
    We have a requirement to
    Navigate from Custom Component to the Standard Component(IUICCON – Contract
    management) on the basis of some conditions.
    We tried navigating with Manual
    as well Dynamic Navigation. The Navigation is happening properly and the Navigation is completed and we are on the Contract
    Management Screen(Standard component View).
    On the Contract Management
    screen (standard Component view), when we click on New Contract Button; it throws dump stating “Define
    Component Usage IUICOBJ”. After debugging we identified that the issue was with the Parent class/ component is getting changed, because of which the usage was not found.
    Appreciate your help.
    Thanks in Advance.
    Regards,
    Bhavikjp.

    Hi Bhavik,
    Check which is the active enhancement set at the runtime in the component_loading BADI.
    If it is anything other than your enhancement set,Set it to your enhancement set .
    Check if the parameter WCF_IGNORE_ENHANCEMT in Tcode SU01 is set to 'A' for the User.
    Regards JP.

  • ARB Issue: Styling Component Parts

    Posted Today:
    http://opensource.adobe.com/wiki/display/flexsdk/Styling+Component+Parts
    Please comment by EOD April 6th. Thanks!

    Hey there again,
    Just bringing a few updates to this subject. I have tried to enforce some specific behavior on af|menu::child-container, calling it according to its container, like this:
    af|panelGroupLayout.MyClass1 af|menu::child-container {
         position:fixed !important;
         top:100px !important;
    af|panelGroupLayout.MyClass2 af|menu::child-container {
         position:fixed !important;
         top:200px !important;
    and, even though the browsers see this exact code (tried with both IE Dev Tool and Firebug), the behavior is still the default one (position:static I guess and, by default, the top property is ignored). I also tried the same for af|menu::scroll-box, af|menu::scroll-content and tried the syntax af|menu::bar-item > table.nth-child(2) {position: fixed; top:100px} (tried this because the 2nd child of the af|menu::bar-item is an html table and indeed, as I said above, the browser sees my specifications for this component but still does not apply them.)
    Just to make it clear, when I say that the browser sees my specifications I mean that it's not just some css that's overwritten by the default component behavior. Firebug / IE Dev Tool say that my specifications are applied, yet the desired behavior does not happen. It's the first time that I encounter a component that does not respect the specifications stated in Firebug / IE Dev Tool.
    I honestly believe this is a framework bug. If anybody has any clue about this kind of behavior, please let me know.
    Thanks,
    Toma

Maybe you are looking for