Is N55-8P-SSK9 required for using native FC ports on N55-M8P8FP

Hello,
Could you tell me if Storage Services license (N55-8P-SSK9) required for using native FC ports on N55-M8P8FP (non-UP ports module - 8 ports 1/10G + 8 ports 8/4/2/1G FC) ?
thank you

Similar Messages

Hardware requirements for using BI-IP

Hello experts,
i would like to have something like a how to paper in which i can find something about the hardware requirements for ideal using of BI integrated planning. Can anyone give me a help?
Thanks in advance.
Best Regards,
Ali

HI Ali,
I have been unable to find specific hardware requirements for using BI -IP so I would refer you to the hardware requirements for running Bi as per notes:
1013139 - prereqs for frontend bi7
1013201 - Hardware and Software requirement for BI Standalone frontend
and please also review the IP note:
1056259 - Collective note: Performance of BI planning
I hope this helps
best regards
Orla.

Hardware requirement for Using SAP ECC 6.0 (IDES)

Hi
I am planning to buy a Laptop for Learning more about SAP modules. I am planning to install ECC 5.0 or 6.0 on the laptop.
Can any one tell me about the minimum configration required for SAP IDES installation. If possible please let me know the processor to be used, the speed of the processor, the RAM and HDD required.
Also Kindly let me know from where do we get the IDES licence version of ECC 5.0 / ECC 6.0
Piyush

Hi
<b>Please go through the following SAP OSS Notes -></b>
Note 822208 - IDES mySAP ERP ECC 5.0 SR1
Note 982228 - Installation KJEPS 601 on SAP ECC 6.0
Note 1070948 - SAP Best Practices Baseline Package PL based on ECC 6.0
Note 748977 - INST: mySAP ERP 04 ABAP on iSeries
Note 855498 - Installation Prerequisite Checker
Note 1012486 - Important Information on upgrading ERP-Systems in HA-Setups
Note 855897 - SAP Business Suite 2005 Installation:IBM eServer iSeries
Note 989368 - Upgrade to SAP ECC 600 with VIRSA 400_700
Note 1034686 - Installation: Leasing Strategic Improvements on ECC 6.0
<u>Please Contact local SAP support from this link below</u>
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002025&_EVENT=DISPLAY&SELAREA=501100035870000000694#
Do let me know.
Regards
- Atul

Requirements for using SAP Kernel 7.20_EXT, e.g. with ERP 6.0 EhP 6

Dear community,
we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
You can find more information here:
Note 1563102 - Linux Requirements for 7.20_EXT kernel
SAP Product Availability Matrix for SAP NetWeaver 7.0
Or directly access the PAM for SAP NetWeaver 7.0 EhP 3 (page 4).
In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
Best Regards,
Alexander Hass.

Dear community,
we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
You can find more information here:
Note 1563102 - Linux Requirements for 7.20_EXT kernel
SAP Product Availability Matrix for SAP NetWeaver 7.0
Or directly access the PAM for SAP NetWeaver 7.0 EhP 3 (page 4).
In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
Best Regards,
Alexander Hass.

Typewriter font required for use with Idraw

Hi
I need to lnondon if there is an app that will let me add a typewriter retro font for use in Idraw..?
The ones avail in idraw are a bit limited.
Thanks for your help!

You cannot add any fonts to any apps at all. The fonts that are in the app are all that is available to you.
If iDraw has an update that includes the font, that is the only way that you could get it. iDraw would have to include it in the app.

Pre-requisites required for using web-services

Hello all!
please tell what are the things required to use siebel on demand web-services.
i have a user-id, password and other than it what all should i have.
i am planning to use web-services to track my leads via my web-site.. can any one please specify what steps should i follow to make it happen..
regards,
Sreekanth

If it will help you, I can send you a small VB.net example program that demonstrates web services. It will be easy to translate into C#. Click on my name to find my email address if you're interested.

Is ITS 6.20 still required for using ESS in ERP2004?

Dear Team,
I am looking at the master guide for ERP 2004 and the following line disturbs me.
"SAP ITS 6.20 is necessary to run ITS-based ESS services. These services are not supported with SAP ITS 6.40."
So now you need 2 ITS's, one v6.20 for ESS and one v6.40 for all other apps. Tell me this isnt true.
Thanks
Jeremy

Hi Jeremy,
Best wishes!
Here is another interesting quote for you:
"The documentation in this section refers to the old version of the Employee Self-Service component. This version comprises mainly applications that are based on the Internet Transaction Server (ITS). This version will be replaced with mySAP ERP 2004 (SAP ECC 5.0).
If you are implementing the Employee Self-Service (ESS) component with mySAP ERP 2004 for the first time or you want to upgrade to the new version, the documentation in this section is not relevant for you. This documentation is only available until the old version of the Employee Self-Service (ESS) component has been completely replaced."
Source: http://help.sap.com/saphelp_erp2004/helpdata/en/39/df95bcd15611d2b4a3006094b9c9b4/frameset.htm
With other words, SAP is moving to a WebDynpro based environment. You can compare the current WebDynpro applications (also in the link) with the ones you are using. If you are using an ESS component that is not available with WebDynpro, you should use the ITS version.
But then you need the latest Business Package for ESS (not MyERP2004). There should be listed which ITS version is required.
As far as I can see now is that the following components are WebDynpro based:
Address Book
- Whos Who
Benefits and Payment
- Enrollment
- Participation Overview
- Salary Statement
- Country-Specific Applications
Working Time
- Leave Request
- CATS regular / Record Working Time (Web Dynpro)
- Clock-In/Out Corrections
- Time Statement
Equipment Overview
- Internal Service Request (ISR)
- Internal Service Request
- ISR Scenario: Request Equipment Repair
- ISR Scenario: Request Equipment Change
- ISR Scenario: Report Equipment Loss
Career and Job
- E-Recruiting Applications
- Skills Profile
Personal Data
- Addresses
- Bank Information
- Personal Data
- Family Members/Dependents
- Country-Specific Applications
Travel Management
Hope this helps...
Noel

Which Edition of Windows is required for using SQL 2012 Always On Availability Groups

I want to use the new feature of having 2 secondary mirror replicas. the first secondary replica will be sync the second one will be async.
Currently I have SQL Enterprise license and Windows 2008 R2 Standard license.
Will I be required to upgrade to Windows Enterprise license to use Always On? (since this feature depends on Windows clustering?)
Can you please confirm if SQL Always On feature can be used on Windows 2008 R2 standard or not?
MSDNStudent Knows not much!

Always On is available with Standard Edition but it supports only 2 nodes.
AlwaysOn is a bigger umbrella which covers two features. AlwaysOn Availability Groups (AG) and AlwaysOn Failover Cluster Instance (FCI).
FCI for 2 node is supported. You can't use AG feature in SQL Server Standard Edition
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

MS SQL Licensing Requirements for use with EIS

Does anybody know what the licensing requirements are for MS SQL to use it with Integration Services and Essbase? We have a couple of small apps that I want to start using with EIS/Essbase/Analyzer. My procurement department is telling me that I need to buy a SQL license for each server processor, because I am web-enabling data that's in SQL. Anyone have any info on this? Thanks!

That is really a MS question. But I do know pretty much how MS licensing works. If you decided to get processing based licensing, it is based on the processors on the machine where SQL is installed - NOT the number of processors of machines that will be accessing it. The repositories for EIS and Analyzer is 'minimal'. You can (should) install SQL on a single processor box and have both EIS/Analyzer use it.However, if you do install it on the Essbase box (which can be faster), you would have to secure a license equal to the number of processors on that box.If you do put it on a separate box, make sure you SA puts it 'close' to the Essbase/EIS/Analyzer box to limit network trafic.Rich [email protected]

What are the IEDriver version requirements for using Microsoft Webdriver tool with a selenium based test tool?

Hi,
We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11.
Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft webdriver tool.
I can see the driver IMPLEMENTATION set to VENDOR in the log, it also brings up the browser, but gets stuck there.Is this a known issue?ThanksTanvi

Selenium is a third party software, so it is not supported in MSDN forum. It would be better consult to selenium's office website or forum. Some placa like here:
http://www.seleniumhq.org/support/
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help required for using ajax in netweaver

Hi..
Can i Use Ajax for my netweaver applications?? If yes, then how?? Any pointers regarding that will be adequately rewarded points..
Thanks

For pure JavaScript enabled AJAX application, no problem. You just write the application as usual and send XMLHttpRequest with parameters to server, then update the web page with your JavaScript code;
I can show you some sample code here:
<script type="text/javascript">
        function createXMLHttpRequest() {
             var xmlHttp;
            if (window.ActiveXObject) {
                    xmlHttp = new ActiveXObject("Microsoft.XMLHTTP");
            else if (window.XMLHttpRequest) {
                    xmlHttp = new XMLHttpRequest();
            return xmlHttp;
        function onclick_changeModelHouse(id) {
            var xmlHttp = createXMLHttpRequest();
            xmlHttp.onreadystatechange = function(){
                 if(xmlHttp.readyState == 4) {
                      if(xmlHttp.status == 200) {
                           // here you get your page component with id or any you like,
                                // then update it with data returned from the request you sent;
                               // Here I update one image url path;
                              var img = document.getElementById("houseModel");
                               // suppose you return the image file name;
                     img.innerHTML="<img src='images/" + xmlHttp.responseText + "'>";
            xmlHttp.open("GET", "http://myserver:8080/myApp//AjaxImageService?model="+id, true);
            xmlHttp.send(null);
</Script>
For some button in your page you add javascript code like
onClick="onclick_changeModelHouse(id)"
somthing.
You need develop servlet to response your request, and usually you need pass back your data in XML format, here I just use plain text for easy understanding.

Setting and process required for using COGI

Hi Gurus,
At present we are using scenario,if child parts are not available system will not allow production confirmation.But it leads customer line stoppage.Now I want to use scenario that we can confirm production in absence of child part and we able to make invoice for finish good and we can take care of child part later.
So you are requested to pl. send total path if possible from customization to end user activities.
Regards
L.B.Yadav

Hi,
System will not do GI automatically you have to do it manually(Through procrument and Production Transction) , Negative stock Functionality is used where the user are not that much trained
some time during night shifts production takes place and suppose user dont know how to tackle or got the error the process stop
Negative stock allow to do posting without availability of stock and it will shows under negative stock
this Functionality you can use during Project stabalization stage ,when user is not aware about COGI transaction and Production cycle . once he awair all cycle you can remove setting of negative stock .
If you are using MFBF then you need to check Post processing record (MF47) for deficate quantity Negative stosk settings reduce the effort of checking Post processing record .
Regards
Girish

Requirements for using pdf in web dynpro

Hi,all
What are the basic system requirements to be able
to use PDF forms in Web Dynproapplications?
Regards
Michael

Hi Michael,
1. Adobe document services should be configured on your J2EE Engine.
2. Adobe Reader 7.0.1 should be installed on your m/c.
3. SAP NetWeaver Developer Studio (Support Package Stack 11) including Adobe LiveCycle Designer (forms design tool) should be installed on your m/c.
4. Active Component Framework (ACF) of the Interactive Forms integration should be installed on your m/c.
Hope this helps.
Plz reward points.
Regards
Nikhil

Suggestion required for using row level security

We have a scenario to provide row level security to some of the transaction tables like HR_EMPLOYEE which has a foreign key column DEPT_ID to HR_DEPARTMENTS table. This table may grow up to about 5 million records. There could be regular SELECT operations on this table and not so frequent UPDATES compared to the SELECT operation.
We were looking at the following approaches...
Table :
HR_EMPLOYEE
     EMPNO
     DEPT_ID
     LAST_NAME
     FIRST_NAME
1. Enable Oracle Label Security policy on this table and use static predicates.
In this approach we add the OLS policy column (POLICY_COLUMN) and add predicate to access data.
e.g. we will be giving access to global data by predicate like
OR POLICY_COLUMN =CHAR_TO_LABEL('POLICY_NAME','C::DEPT1')
where C::DEPT is the OLS Label
2. Using VPD policy. We donot add any column, instead use the existing column DEPT_ID to provide row label security. In this approach the DEPT_ID is to be compared against an additional table and DOMINATES function will be used to verify the permission for the user to access the data.
e.g. In this approach, the policy function is like
'DOMINATES(char_to_label(''POLICY_NAME'', SA_SESSION.LABEL(''POLICY_NAME''))
,char_to_label(''POLICY_NAME'', POLICY_PKG.GET_LABEL_FROM_DEPTID(DEPT_ID))) = 1'
The GET_LABEL_FROM_DEPTID function returns the OLS label for the corresponding department. This is compared with the user's session label and appropriate rows are given access.
Can someone suggest on which of the above approaches is more performance effective considering the number of records and the additional OLS column added to the table.

Hi there,
would you be able to describe as detailed as possible what you want to achieve? From my first glimpse at your code, it seems as if you are using both OLS and VPD in a rather extraordinary way.
Best, Peter

Which permissions required for using CAF External Service Configuration?

Hello,
I have written an application service which invokes an external RFC. To this end, I have imported the desired RFC as external service and wrapped it as an application service.
However, when invoking this application service I get an error message that the external service has not been configured. I have learned that I have to use CAF's External Service Configuration tool.
Unfortunately, this tool complaints that I don't have the required administrator permissions. This happens even when I log in with the administrator account.
What do I do wrong?
Best regards
Alexander

I just have found the required role. It is role SAP_CAF_ADMIN.

Is N55-8P-SSK9 required for using native FC ports on N55-M8P8FP

Similar Messages

Maybe you are looking for