Is normal that appear a spot when i use the camera? and when you apply the zoom, the spot increases its size?

Morning alex navarro,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Hope this helps,
Mario

Similar Messages

If a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When we use calculation script and when we use business rule

when we use calculation script and when we use business rule can anyone please tell me

Re the OP's question, here is an excellent introduction to Calculation Manager and business rules. It was the first hit when I googled "calculation manager hyperion".
http://ranzal.wordpress.com/2010/06/11/oracle-hyperion-calc-manager-%E2%80%93-part-1/
You can also go to odtug.com -- the Tech Resources section has a series of presentations on Calculation Manager, from beginner to intermediate.
The added benefit with business rules are that you can use variables and runtime prompts. You can also link planning with business rules and pass information from a web form into a business rules.^^^Only with Planning. There are no runtime prompts with Essbase in 11.1.2.2 but I hear it is coming back in 11.1.2.3
We can use Business Rule for all applications and it is GUI.^^^Doesn't have to be GUI-based. You can (depending on version) flip back and forth between GUI and script. I have not tried writing (nor can I actually think why you would want to do this) a Calc Mgr rule for multiple apps. Maybe you are thinking of a script object that can be called multiple times?
To check whether a calc script is executed or not you have to use the Essbase application database log file (Plan1.LOG)^^^As business rules are, sooner or later, translated to BSO (and hey, ASO too and HFM and Fusion and HPCM and they can differ, a lot, so this is not always true) calc script language, you can always check in the application log to see what is run if Planning or BSO Essbase.
Regards,
Cameron Lackpour

All websites I visit everyday are blocked by a virus that appears to be from Mozilla (but isn't) and wants personal info to unblock the parent control. My viru

I tried to go to websites I visit everyday and they are all blocked by a virus that appears to be from Mozilla (but isn't) and shows mozilla logo and said my website was blocked by Mozilla parent control and you have to sign up for it. It asks for all the personal info that you NEVER give online so I knew it was a virus. I am writing this in safe mode. My Vipre will not pick up this virus and Malware bites won't either. I deleated Mozilla and reinstalled it but it didn't work.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

When to use Flexible Update and when Direct update??

Hi ,
I know some situations when to load flexible update( transaction , flat file) and when to use direct update (only for master data).
Can some one correct me and tell what are all the possible situations for these 2 types of Update when loading Infosource?
Thanks alot in advance.

hi,
The direct update methods used previously used DataSources for attributes and
texts connected directly with master data tables and text tables for the InfoObject.
In the flexible update, the master data and text tables now appear as data targets. T
he flexible update is used to fill these data targets from master data and text
InfoSources that were created for the InfoObjects listed above. This enables you to
use update rules for the data targets (master data/text tables) in addition to the
transfer rules already used.
check these links for detail.
http://help.sap.com/saphelp_nw04/helpdata/en/98/3a14836fe5e1499a4e17d2d45f4612/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/cade377806e664e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/41/56ba275e032f1ee10000000a114b54/frameset.htm
http://help.sap.com/search/highlightContent.jsp
Regards,
Manoseelan

When to use IN Queue and When to use OUT Queue

The architecture that we have is Client publishes the EDI 272 data to FTPS Server. We have ESB configured to pick the EDI data from FTP location, construct the B2B Header message and send to B2B. The B2B translates the EDI raw data to EDI XML. BPEL reads the EDI XML data from B2B. I have doubt here in using the IP_IN_QUEUE and IP_OUT_QUEUE. As per my understanding, IP_IN_QUEUE is used for messages inbound to B2B and IP_OUT_QUEUE is used for messages going out of B2B. If this is correct, ESB module would publish to IP_IN_QUEUE and BPEL would pick from IP_OUT_QUEUE.
I'm confused here because I read few examples in which the queues were used other way around.
Kindly clarify whether the usage of IN and OUT queus are correct.
Thanks,
Mani

HI Mani,
When B2B receives an inbound message from trading partner, it will send to IP_IN_QUEUE.
When Back application wants to send a message to B2B, Backend application has to send the message to IP_OUT_QUEUE. B2B picks up the message from IP_OUT_QUEUE and send it to trading partner.
The above mentioned queues are shipped with the product. However, users can can create there own queues.
Thanks and Reagrds,
Prasanna

I've seen all the posts for fixing the wifi on the 4s, none of them work! So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

I've seen all the posts for fixing the wifi on the 4s, none of them work! So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect? You think apple would have a clue how to fix it! Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

I have firefox 10.0.2 installed but everytime I open up firefox I get a message that says I am not currently using this version and I need to update to the latest version and why won't firefox support printing mac coupons

my firefox info shows that I am using 10.0.2 but I keep getting a repeated message when I open it saying I'm not using the most recent version.
Even tho the mac coupon printer says firefox supports this install it doesn't allow me to print it.

Hi cleopt,
You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
You should try changing your home page to:
about:home
If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps

When I click the camera and when it opens it just black.

I was going to take a picture with my iPod & I saw a button option next to the main icon that is used when taking a picture I clicked it and the screen went all black. What can I do?I

Have you tried a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430

I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected through a wi fi spot, i can play all of the tracks. Help!

I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected in a wi fi spot, I can play all of the tracks. Help please.

Hi,
You need a wifi connection to stream. Previously played tracks appear in a temporary cache which allows them to be played again when yOu have no wifi..
You can either predownload selected tracks or use cellular data.
Jim

The camera on my ipad cannot be launched,the shutter appears closed and the button for taking a picture is not there. When tryying to use intsgram the message camera cannot be launched appears .tried to restart but problem still there

My camera is not working .shutter appears closed.tried to restart ipad but problem still there.no problem with photo booth problem with istangram

Try closing the Camera app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
And by restart do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot). If not, and if closing the app doesn't fix it, then you could try that.

I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Help me!!

I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Is there someone out there that can help me out? I would appreciate it!

Hi NYYJMM,
Thanks for visiting Apple Support Communities.
You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
How to reset iPod
http://support.apple.com/kb/ht1320
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Best Regards,
Jeremy

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

It's normal behavior. You don't have to worry about. Most of what's listed is just a report of what the utility finds., not necessarily that there is omething wrong.
If you want to find out more, read the link below, or see the More Like This links on this page.
http://support.apple.com/kb/TS1448?viewlocale=en_US

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I thank you for the response. Apple does some assinine things sometimes and this is one of them. Ask the planet the difference between a movie and a home video and with the exception of Apple, you'd get 100% consenus on the what difference is. A home video is something that I shoot, like my kids birthday party. A movie is something I urchased either via download or a DVD that I ripped. Unbelievable! The fact that Apple has chosen not to distinguish based upon which folder I tell it is Movies and which folder is Home Videos is really hard to fathom - sounds like something Windows would do. I find it funny that in my iTunes movies sub-section of the movies section, the movie icons have a cloud icon in upper right corner to distinguish it as bought from Apple iTunes versus no cloud icon for movies that I have ripped - so the distintion was already made and clearly visible. Now - everything just defaults to "home videos" if I try to import a new ripped DVD - why even bother to have this distinction on the iTunes bar? WOW!
As for your direction, I do not understand what you are telling me - what Media Kind and what Options tab are you referring to? I see no Options tab in iTunes. Right licking on the movie icon does not yield media kind or options as well. Gping to the source file does not yield these options either.
Thanks again for your help.
Clay

Is normal that appear a spot when i use the camera? and when you apply the zoom, the spot increases its size?

Similar Messages

Maybe you are looking for