Is not running all of Microsoft software bad?

I just got a call saying that my computer keeps sending error messages to the server. The lady said that it is because not all of the software under Microsoft Corporation are running and thus might be bad news for my computer. I'm personally not encountering problems so I do not what to make of this. Do I have a problem?
My computer is a Toshiba Satellite Ultrabook U845W-S430 if that helps.
Solved!
Go to Solution.

For Windows 7, see How do I run a command prompt with elevated privileges? here.
Command Prompt: frequently asked questions
-Jerry

Similar Messages

Anyone else had trouble getting RID of Mt Lion? I was shocked to learn that I could NOT run some of my software on it and attempted (with online help) to reinstall SNow Leopard. My computer is now in the hospital! I should have been told beforehand.

I 'upgraded' to Mt Lion over the weekend. It seemed very slow, and sluggish. Within a day I realized also that my Reunion program would not work,
my Quicken would not work, and who knows what else. I kept getting alerts saying that I could not use any PC programs. So, I decided to go back to Snow Leopard - I spent two and a half hours on the phone with two very capable people, then was told that I'd have to take it to an Apple Store. I DO have
extended warranty but a lot of good THAT does! Besides, our nearest store is 160 miles away! So, I took it to our local authorized dealer. It is currently
being worked on, and the minimum will be $189! Fortunately, Time Machine was being backed up by my external hard drive. But, I just received a
call and they can't make my password work to get in! Somehow that has changed back to an old one I don't remember!
MY COMPLAINT: When speaking with a rep about the feasibility of downloading Mt Lion, not ONCE did anyone tell me that I 'might' have these
problems. I NEVER would have upgraded! Now I just want my computer restored to USABLE -

What an unfortunate story.   I hope you will quickly get things back to normal.
To be fair though, there has been quite a lot written about the effects of mountain Lion and the loss of Rosetta, as one example.   I am wondering just how much research you did before buying.
But on the brighter side, you can wipe Mountain Lion and reinstall Snow Leopard with not too much trouble.   It would have been much worse had you bought a new machine with M.L. pre-installed and then found your programs wouldn't work.
Message was edited by: seventy one

Batch File not running all commands, MaxL seems to stop them

I have a batch file that looks like this (removed the part in the middle that does the data extract, this is just for testing)
E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin\startMaxl.cmd "E:\DataExtract\Scripts\MaxL-StartArchive.txt"
E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin\startMaxl.cmd "E:\DataExtract\Scripts\MaxL-StopArchive.txt"
It executes the first MaxL file find, and then in the command prompt says "MaxL Shell Completed" and goes back to the prompt. It is not picking up the second MaxL script.
We just upgraded to 11.1.2.1 and this worked fine in 11.1.1.3 when using essmsh. Any idea why it doesn't go through the whole script?
The contents of the two files are:
MaxL-StartArchive
login 'admin' identified by 'removedpassword' on 'servername';
alter database CSHBud.PandL begin archive to file 'E:\DataExtract\CurrentExtracts\Archive-CSHBud-PandL.txt';
alter database CSHBud.Wrkforce begin archive to file 'E:\DataExtract\CurrentExtracts\Archive-CSHBud-Wrkforce.txt';
alter database PropBud.NOIStmt begin archive to file 'E:\DataExtract\CurrentExtracts\Archive-PropBud-NOIStmt.txt';
alter database PropBud.Staffing begin archive to file 'E:\DataExtract\CurrentExtracts\Archive-PropBud-Staffing.txt';
logout;
MaxL-StopArchive
login 'admin' identified by 'removedpassword' on 'servername';
alter database CSHBud.PandL end archive;
alter database CSHBud.Wrkforce end archive;
alter database PropBud.NOIStmt end archive;
alter database PropBud.Staffing end archive;
logout;
exit;

>
E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin\startMaxl.cmd "E:\DataExtract\Scripts\MaxL-StartArchive.txt"
Had this happen at a client that just upgraded
Try Cmd /C E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin\startMaxl.cmd "E:\DataExtract\Scripts\MaxL-StartArchive.txt"

ICalendar shuts down when going from year or month view to day view for dates starting May 2014. I'm running all the latest software versions

I realized the above mentioned problem already months ago, but assumed Apple is onto it and will fix it once the time comes closes. I have researched on the net to see if I can find posts with similar problems, but there don't seem to be any.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

IWork '09 programs will not run on Lion

I have iWork 09 installed on my MacBook Pro. After installing Lion, none of the three software programs will open. I get an error telling me to contact the developer and make sure I am running the most current version of the software. I have run all the standard Software Updates and everything seems to be up to date. I have tried downloading the iWork updater v9.1 but when I run it, it tells me that my version of Keynote is newer than the update and then quits.
Anyone have any ideas?

Office 2004 was written for PowerPC. To run Office 2004 on an Intel based Mac, you need Rosetta to translate PowerPC instructions to Intel instructions. OS X Lion no longer includes or supports Rosetta. As such, any application written for PowerPC no longer work on Lion, including Office 2004.
Office 2008 and Office 2011 were written for Intel. They'll work just fine on OS X Lion.
To address your problem, you can do one of the following:
1) Reinstall OS X Snow Leopard from a backup, if you made one.
2) Upgrade to Office 2011.
3) You could use a suite of productivity apps that can import Office documents, such as OpenOffice, or Apple's iWorks. There will be some incompatibilities between these applications and Office though.

Can not run two domains on same machine (JVM).

Hi every body in news group,
I have a problem with weblogic 6.x, I am trying to run multiple domains e.g examples,
mydomain, mydomain1 on the same machine (JVM) at the same time, but I can not
run all three at same time, I changed ports already on all domains, and every
one has different ports, e.g 7001, 7002, 7003, but still when one domain is running,
and I try to run other startup file by command prompt, it says, can not initialize
JVM, can some one help me to understand, why I can not run different domains at
one time, according to my knowledge, we can run multiple domains on one JVM, by
giving them differnt ports. I will appreciate your help, looking forward to your
response, thanks in advance.
Cheers!
Ghayyur

This should work. Could you post the exact error message?
Ghayyur Hassan wrote:
Hi every body in news group,
I have a problem with weblogic 6.x, I am trying to run multiple domains e.g examples,
mydomain, mydomain1 on the same machine (JVM) at the same time, but I can not
run all three at same time, I changed ports already on all domains, and every
one has different ports, e.g 7001, 7002, 7003, but still when one domain is running,
and I try to run other startup file by command prompt, it says, can not initialize
JVM, can some one help me to understand, why I can not run different domains at
one time, according to my knowledge, we can run multiple domains on one JVM, by
giving them differnt ports. I will appreciate your help, looking forward to your
response, thanks in advance.
Cheers!
Ghayyur

Itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software

itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software.

Thanks Alex,
I performed all of the steps you suggested and iTunes v-12.1.1 installed correctly.
The problem is, that version of iTunes now does not recognize my HL-DTST DV-DRAM GMA-4082N, CD/DVD DRIVE.
When I insert a CD to rip into my iTunes library nothing happens.
If I click on the properties for that D-drive nothing shows using the Explore function.
If I open Microsoft Media Player v-11.0.5721.5262 I can see all of the tracks on the disk, and the player rips the songs to the Microsoft Media Player library which I can then play.
I then reinstalled VLC media player v-2.1.5, and was able to play cd's and watch DVD's. When I performed that install I again received the iTunes banner:
Earlier versions of iTunes worked just fine:
iTunes v-11.4 (32-bit) 10 September, 2014, (6 months ago), size: [106.11 MB], for Windows XP SP3 worked on this same Toshiba laptop.
The latest version: iTunes v-12.1.1 seems to want to be the only piece of software allowed on the 32 Bit XP system.
To me, it looks like Apple does not want any other applications running on this system. Not very thoughtful for customers that cannot afford to purchase more expensive computers when they are on a fixed income. I have been a long time user of Apple equipment when employed by Motorola, development engineering.in my younger years.
Is there any way to get the earlier versions of iTunes back on this laptop?
Thanks,
Jay

Itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

Select you device from the left sidebar of iTunes and navigate to the Photos tab at the top. Do you have the Sync Photos With checkbox checked and set to iPhoto?

After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

Could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes, could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes

I treiws upgrading my itunes to the b=newest version and I got the following error:
"could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run. Verrify that you have sufficent access to that key or contact you support personnel"
I then went to that key and changed the permissions on it so that for Everyone - it was Full Controll instead of limited and I also changed the permissions for my administrative account which also didn't have full control. I tried to go back to the Itunes installer but it still wouldn't let me continue the process.
Any help would be much appreciated.
Musicalrabbi2k3

Reinstall the system.

ERROR: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

ERROR: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

Error 1402 | Error 1406 | Acrobat, Reader
Error 1603: A fatal error occurred during installation

I have just moved from using Windows all my life to Mac OS Lion. My accounting software "Tally" does not run on it. Please help !

I have just moved from using Windows all my life to buying a Mac Book Pro running on OS Lion. But my accounting softwares Tally 7.2 and Tally 9 do not run on it.
I just learnt that the software platform of Tally Accounting softwares are specific to Windows only.
I need to run the accounting software, Mail and several spread sheets and documents at the same time.
Is there some way I can do this on the Mac Lion OS?
Help solicited !

Yes, you can share files across a network as long as the network server is setup so your Mac can connect to it. See Mac OS X 10.7 Help: Connect to shared computers and file servers on a network, Mac OS X 10.7 Help: Connect your Mac directly to a Windows computer, Mac OS X 10.7 Help: Connect to a Mac from a Windows computer, and Mac OS X 10.7 Help: Connect to shared computers and servers using a network address.

Long motor test error did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan? speed in time speed

ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?

ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?

IPad 2 deleted all of my contacts, when I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!

When I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!

Recover software as you have described is pretty much your only option - keep in mind that if wait, some of the currently recoverable data may well be over-written and lost.

Is not running all of Microsoft software bad?

Similar Messages

Maybe you are looking for