Is NWDI going away with the Intro of Central CTS?
With the introduction of the attached:
Software Logistics
...does this mean NWDI is going away?
After going through the article, here are a few thoughts:
Central CTS would only change the Transport Mechanism of your landscape.
I believe NWDI will still be required for your central source code management and central build mechanisms. I do not see any other way of doing this either using eCTS or cCTS.
In an implementation I have worked on recently, we had eCTS and NWDI being used. eCTS was able to help us do the non-ABAP transports from an ABAP system. We still used NWDI for Source code management and central build and assembly.
Please correct me if I am wrong.
Thanks,
Shanti
Similar Messages
-
For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free
If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars. -
I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1. For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation ABORT YES". If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down. But the next time I use the computer and then shut down the message is back. I have looked to see if there are any downloads pending or if there are any updates trying to download. I am very puzzled.
Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test. -
Revision: 9180
Author: [email protected]
Date: 2009-08-07 15:11:43 -0700 (Fri, 07 Aug 2009)
Log Message:
When another popup is going away as the alert is going up, the Alert can get validated inside of addPopUp and its centering logic never got the event it expected.
add the event listener earlier so it is ready if we get validated inside addPopUp
QE Notes: versioning/baselines/mp_alert_mask_compatible.png needs updating. I think the current baseline is incorrect.
Doc Notes: None
Bugs: SDK-22819
Reviewer: darrell
tests: checkintests mustella/components/alert
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22819
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Alert.asHi or2tx2002,
We're really sorry to learn of all the equipment issues you've experienced in the last year. In order to discuss your replacement options, I ask that you please PM me with your wireless number, a contact number and a good time to reach you. I will be happy to reach out to you and bring resolution to this matter.
Thank you and I look forward to hearing from you soon. Make it a great day! -
After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?
Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working. -
Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.
Contact facebook to address the facebook issues.
-
IPHONE 4 + "io6". I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold photo, window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll. Please advice...
Steve750717 did yu notice that the post is 6 months old?
-
Can I do away with the passcode page?
Can I do away with the Passcode page, it is becoming a nusiance?
Settings>General>Passcode-Lock>Off (you need to enter passcode to turn off)
-
What is going on with the scroll function. It doesn't seem to work ever since I downloaded Mountain Lion.
I've noticed this too...when I'm in Safari, scrolling is a bit jerky and sometimes it stops even though I'm still scrolling...my fingers go right off the trackpad. I just downloaded the new updates onto my brand new macbook air- had to do it manually as "power nap" doesn't work, even after the SMC reset. Lamesauce.
-
What is going on with the Iphone4 home button locking up? I see lots of people having issues with the button becoming unresponsive, but no resolution.
Suggestions include:
Upgrade
Restrore
ReSync
Push harder,
etc.
I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting a large portion of the user community.lfossier1 wrote:
Apple has to do something about this, as it is affecting a large portion of the user community.
No they do not and no it is not affecting a large portion of the user community.
If it is an actual hardware issue, the only fix is to repair or replace the hardware.
If it is a software issue, restoring as new will fix it. -
I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.
No.
You must restore. -
How can I get sleep mode back to my RAZR M since it went away with the latest upgrade?
How can I get sleep mode back to my RAZR M since it went away with the latest upgrade?
ThanksHi aztigger!
Good news! You can still put the screen into sleep mode under Settings > Display > Sleep. Let me know if that helps!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport -
I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR changing the WB it is giving me a second copy with a new WB. Your advise is very much needed and appreciated. Thank you.
Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
Are these second copy photos by any chance photos that had been previously imported? -
What is going on with the SPAM filtering?
Spoiler (Highlight to read)
What is going on with the SPAM filtering? Works fine for a couple of weeks then suddenly I got slammed with tons of SPAM for a few hours then suddenly the filtering kicks in again. Usually happens late at night and clears up in the morning. Never had this problem until just a couple months ago. It's gotten so bad that I'm about to move everything over to gmail and just stop using Verizon, would rather not do that as I've had the same e-mail address since the Bell Atlantic days.Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist..
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
What is going on with the quick keys in CC? Illustrator, InDesign and Photoshop?
What is going on with the quick keys in CC? Illustrator, InDesign and Photoshop? The delete key only works when it wants to as well? We (Co-Workers) all use our shortcut keys A LOT and these will sometimes work and sometimes don't work. It only started when we downloaded the new CC. What's going on??
The Arial Font works on the MacBook Pro, but it is not listed on the iMac.
By not listed, do you mean it doesn't show up in the font lists of apps you're using, or it literally isn't on the hard drive?
Look in the /Library/Fonts/ folder. That's the Library from the root of the drive, not in the System folder or your user account. Is Arial.ttf actually missing?
Maybe you are looking for
-
Custom fields in Report painter in CCSS table
Hello Experts, I am in a processes of developing a report painter with custom fields in the selection screen. The custom fields are available in PRPS table. With hard difficulties I brought the custom fields in selection screen of the report painter.
-
Want to display a .bmp file in reports
Hello there I am trying to display a .bmp file on reports which I think is simple.the main problem is that After making changes to report we transfer the report file to Unix and then generate the report in unix and print it and in that process the re
-
Suddenly can't drag songs to a different order in playlists. Help?
I used to click and drag songs in my Itunes playlists to burn CD's in a specific order. All of a sudden I cannot move the songs. Click and drag isn't working. I have had Itunes for about 7-8 years and this is the first problem I've had. Any help?
-
Java.sql.SQLExcepton: Blob not found
I'm working with IDS7.3 Informix Database on Unix, jdk1.3, jdbc2.10, Jakarta-Tomcat Webserver 3.x. When I want to select content from BYTE type (content is Word document) in database with code line: rset.getBytes(1); I got next exception: java.sql.SQ
-
Trying to install Forms 11.1.2.00.
Hello, As a home user, I am not in Oracle Support, I have Windows 7 Home Edition, and I am trying to install Forms 11.1.2.00. I have installed JDK 1.6 update 35- first install Weblogic ( wls1035_generic.jar ) ok Then Forms.ok Then configure Forms (f