Is Oasis UBL standard supported in PI

We would like to implement electronic invoices using the UBL standard. I wonder how this can be implemented in SAP PI. Do I need for example some adapter from Seeburger or another 3rd party?
I noticed Seeburger has a ebXML adapter but I don't know if this is the adapter to be used for UBL.
Theo

Hi Theo,
You are spot on !!! The seeburger adapter for ebxml is the right choice for UBL. No issues go ahead . For further info i suggest visiting the seeburger site.
Additionally i would like to add UBL is not actually an u201CebXMLu201D deliverable u2013 yet! UBL does not mandate a particular messaging framework but is built to support ebXML.
Regard
joel
Edited by: joel trinidade on Apr 10, 2009 1:22 PM

Similar Messages

  • Is UBL standard supported by XI.

    Hello,
    Currently , am working on a senario in which a webservice is getting called. Webservice is build using UBL xml standards. And while importing the WSDL of webservice and other referenced UBL xsd's, not able get the message deifinitons.
    Let me know if any limitaions for using UBL standards.
    Regards,
    Sreenivas.

    >
    sreenivas tirunahari wrote:
    > Hello,
    >
    > Currently , am working on a senario in which a webservice is getting called. Webservice is build using UBL xml standards. And while importing the WSDL of webservice and other referenced UBL xsd's, not able get the message deifinitons.
    >
    > Let me know if any limitaions for using UBL standards.
    >
    > Regards,
    > Sreenivas.
    I dont think UBL standard is supported in XI. Even RPC stype is also not supported for the WSDL.
    You will require a DOC type.

  • Netweaver Standards supported by XI

    Hi, Can someone explain the necessary Netweaver Standards supported by XI?
    regards
    Reema

    Hi Reema Shah  ,
    The following websites will answer u'r question:
    SAP NetWeaver Technology Overview
    http://www.gi-ev.de/regionalgruppen/aachen/vortraege/abstract/04/21-04.pdf
    SAP NetWeaver® Overview
    http://www.saparabia.com/sapworldtour06/presentationsfiles/06%2012.30-13.00%20SAP%20NetWeaver%20-%20Hichem%20Maya.ppt#1148,2,SAP NetWeaver® Overview
    SAP NetWeaver® SOLUTION OVERVIEW
    http://www.sap.com/platform/netweaver/pdf/BWP_OV_SAP_NetWeaver.pdf
    SAP NetWeaver
    https://www.sdn.sap.com/irj/sdn/pbnw?rid=/webcontent/uuid/bf74d491-0701-0010-edb8-9b77746f931f
    SAP Netweaver : The need for practical solutions on the road towards the statergic goals
    http://searchsap.techtarget.com/searchSAP/downloads/Tactical_solutions_towards_strategic_goals_overview.pdf
    Systems management in SAP® NetWeaver environments
    http://www.realtech.com/wInternational/pdf/software/themen_whitepaper/whitepaper_netweaver_e.pdf
    BUSINESS PROCESS MANAGEMENT WITH SAP NetWeaveru2122
    http://www.sap.com/platform/netweaver/pdf/BWP_NetWeaver_BPM.pdf
    SAP Provisioning with SPML 1.0
    http://www.oasis-open.org/committees/download.php/15901/SPMLProvisioningWithSAP.pdf
    SAP NetWeaver: Overview of SAP NetWeaver AS Java Administration
    http://www.sap.com/community/pub/showdetail.epx?itemID=5548
    http://www.erpgenie.com/sap/netweaver/
    SAPu2019s NetWeaver is an Enterprise Integration Platform
    http://www.businessprocesstrends.com/publicationfiles/01%2D06%20ART%20SAP%20NetWeaver%20Matthews%20Scott%2Epdf
    Teradata and SAP NetWeaver Integration Options
    http://www.teradata.com/library/pdf/eb4699.pdf

  • Does Acrobat X Standard Support "Edit Page Numbering Format"

    In Acrobate X Pro, I can edit page numbers using the "Edit Page Numbering Format" feature. This is the icon in the Customize Quick Tools dialog box:
    One of my users wants to know if Acrobat X Standard supports that feature?
    Thanks!

    Hi Joe,
    Yes, the 'Number Pages' option from 'Document Processing' is available in Acrobat X Standard too.  This tool functions the same in both Acrobat X Standard and Professional.
    This page provides a nice overview of the functionality differences between Std. and Pro.: http://www.adobe.com/products/acrobat/matrix.html
    -David

  • Vitrual Print Server to Print Standard Support

    Can a Vitrual Print Server be used for Print Standard Support or Advanced Support.
    Are there different Print Server Script that I should use other then:
    /xmlpserver/convert
    Any information would be great. Thanks

    Inplace upgrades (As Christopher said) are a bad idea, they bring along with them all the old patches and other cruft that you want to avoid since the old system has been maintained.  Upgrading the server should bring along all the old settings, so
    yes this should work as you hope. The one bad thing if you were to rebuild you would have to re-add all the print shares.
    This really isn't an AD question and would suggest in the future you post in the General Windows Server forum.
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • SQL Server 2012 Standard Support for Lync 2013

    Hi,
    Does SQL 2012 Standard version support Lycn 2013 , I am planning to have following features.
    1- SQL 2012 Mirroring
    2- Monitoring Role on FE Servers
    Regards
    Usman Ghani
    Usman Ghani - MCITP Exchange 2010

    Agree with Anthony, SQL 2012 Standard support Lync 2013.
    For Standard or Edition Edition of SQL that according to High availability node of Database that you want.
    Two-node failover clustering for the following:
    Microsoft SQL Server 2012 Standard (64-bit edition). Additionally running the latest service pack is recommended.
    Microsoft SQL Server 2008 R2 Standard (64-bit edition). Additionally running the latest service pack is recommended.
    Up to sixteen-node failover clustering for the following:
    Microsoft SQL Server 2012 Enterprise (64-bit edition). Additionally running the latest service pack is recommended.
    Microsoft SQL Server 2008 R2 Enterprise database software (64-bit edition). Additionally running the latest service pack is recommended.
    Also for more detail details, you can refer below link
    http://technet.microsoft.com/en-us/library/gg412952.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Does Office 2010 Standard supports IRM ?

    I need a clarification.
    Technet says we can't use IRM with Office 2010 Standard. But I am able to open IRM mails from Standard Edition, though i am not able to compose new mails / protect new docs.
    Does technet means Office 2010 Standard supports only reading IRM protected mails/docs, but not protecting mails/docs ? If it is so, can i go ahead and purchase Office 2010 Standard instead of Pro Plus ? Is that legally right ?
    Regards.

    Hi,
    Yes. Office 2010 Standard has a limited IRM feature which you mentioned.
    If you want to replace the product, it would be better to call Microsoft for help.
    Best regards,
    Rex Zhang
    TechNet Community Support

  • Need versions of web service standards supported by SAP WAS

    Hello Friends,
    I need to know web service standards supported by SAP WAS with their versions.
       List of Web service specification needed is:
         Basic Profile
         Attachments Profile
         Simple SOAP Binding Profile
         WS-Addressing , SOAP Binding, WSDL Binding
           Simple Object Access Protocol (SOAP)
           Web Services Description Language (WSDL)
          JAX-WS
           JAX-R (For Registry integration)
    Can anyone please provide me with these details?
    Thanks and regards,
    Mayuresh

    I think you have to add the destination in Windows-Preferences-Destination Configuration-Web Service Configuration.
    Then you can search it when selecting "web services" as provider
    Edited by: Jan Nyfeler on Jun 11, 2010 8:52 AM

  • Is Acrobat 7.0 Standard supported on Windows 8.1?

    Will I be able to install Adobe Acrobat 7.0 on my new laptop running Windows 8.1 or will I have issues with functionality?  Thanks.

    Hi deborahlong,
    Here are the system requirements for Acrobat 7: System requirements for Acrobat Professional 7.0, Standard 7.0, 3D and Elements 7.0 (Mac, Windows and Unix for 3D only)
    Windows 8.1 is not a supported operating system for Acrobat 7, so you may be able to install/use it, but Adobe Technical Support can't support any issues that may arise from using an unsupported operating system. (For what it's worth, I did find several posts on Microsoft's website from folks who have been able to use Acrobat 7 in Windows 8.1.) But, again, it is not a supported environment.
    Best,
    Sara

  • C++14 Standard Support for Solaris Studio

    Hi Steve,
    Currently, does Solaris Studio 12.4 Final Release support C++14 constructs? I saw the Standard C++ website https://isocpp.org/std/status and the C++14 Standard will soon release the final draft later this year.
    But, given that C++14 is going to be a minor change as compared to C++11, which they mentioned C++14 mostly completes C++11 (in FAQ: https://isocpp.org/wiki/faq/cpp14#cpp14-compilers), will the next release add support of C++14 before the next standard, which is slated for around 2017?
    Although at this stage nothing has been confirmed yet, I wonder if the statement in the Standard C++ FAQ would mean that the new C++14 would still be treated as C++11, which would mean that Solaris Studio compilers would handle C++14 codes as under C++11 standard (i.e. the -std=c11 and -std=c++11 flags can be used to compile C++14 codes), though I am not sure.
    Regards,
    Brian

    Compared to C++11, C++14 has two kinds of changes:
    1. "Bug fixes":  Primarily clarification of issues in C++11 that were incomplete or ambiguous, and loosening of rules that were deemed to be unnecessarily strict. There is at least one rule change, where C++11 required instantiation of unused template functions that had an exception-specification, and C++14 does not.
    2. New features:  New syntax, and new contents in the standard library.
    Like most other compilers, Studio 12.4 in C++11 mode has many of the C++14 bug fixes, including the rule change about template functions that I mentioned above. (For one customer's code, the rule change resulted in a nearly 20x speedup in compile time, from days to hours.)
    Studio 12.4 does not have any of the new C++14 features, and the compiler does not have a C++14 mode. The reason is timing; Studio 14 feature freeze predated approval of the C++14 standard. We prefer not to implement proposed new features until they are published in the standard, because features have a habit of changing between their supposedly final form and actual publication. We have been bitten by such changes in the past, and it creates problems for us, and our customers who depend on compiler stability for large projects.
    We expect to implement C++14 in a future release. Oracle policy does not permit me to be more specific.

  • [FR] Email encryption standards support

    I'm not sure if this is supported in BES or not, but most smaller structures won't use BES anyway and many of them have been using standards such as S/MIME and PGP to protect or authenticate their communications.
    BlackBerry 10 offers no support for those standards which means that some people have to use alternative mobile OS or desktop solutions in order to perform their job.
    Please support email encryption standards in BB10.
    Olivier - interfaSys ltd
    Developing for BlackBerry 10 devices using the Sencha Touch framework.

    I invite you to check my new application which implements PGP for BlackBerry10.
    http://appworld.blackberry.com/webstore/content/47148895/?lang=en
    More details here:
    http://pawelgorny.com/pgpgp/
    I hope you find it useful. In case of any questions/remarks, please send me an email or PM.
    Regards,
    Pawel Gorny
    my apps: http://pawelgorny.com/
    PGpgp, Your Reply, Anagrammatist, Texas Hold'em Odds Calculator, Contacts to CSV
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • To Add additinal feilds in the Standard Support Desk message screen

    Hello Experts,
                        The requirement is to add the attachment feild in the support desk message screen  in the Fast track tab , although in the transaction tab already the document option is available for attachments the end user's want it in intial screen
        I think this can be done EASY ENHANCEMENT WORKBENCH - EEWB but i have not worked with it,can anyone tell me about its working?....IS there any screen Exits or USer Exits available for the same?
      IS it possible to do this?
    if anyone has woked with this please give me your valuable suggestions.This is a urgent requirement give me a solution ASAP.
    Thanks & Regards,
    Mohana Priya

    Hi Suzzane,
                     Thank you for sending me the useful link that gave me the steps to go ahead in EEWB.
    Now i have created a object and extention in EEWB ,the it took me to the wizard automatically ,i followed up the notes in wizard and after it is completed, it shows a ERROR message as "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
    The inputs that i gave in  while creating Extention are :
    1)EEW Businness object : BUSINESS_TRANSACTION ( i.e) CRM BUSINESS
    TRANSACTION)
    2)Extention type : ADD_NEW_FIELDS
    The  inputs that i gave in wizard inorder to add attachment as a new feild in CRMD_ORDER  transaction are:
    1) In step 2  of wizard to select thae business transaction type i choose service process and tried even business activity .
    2) While defining the feild name, i gave Attachment as the feild name and choos check box.
    then follwed with the rest of the steps and completed the wizard.
    Now can you tell me,if the steps and the inputs that i gave are right or nt?
    and what does the Error Message mean?  i think it is some system settings ,how to resolve this ?
    Please give me your suggestions ASAP.

  • Editor: What HTML standard supported?

    In our CSS, we would rather use ems for sizing instead of pixels or points. However, RoboHelp's editor doesn't seem to completely understand, something like:
    p {
        font-family: Arial, Helvetica, sans-serif;
        font-size: 0.9em;
        line-height: 120%;
        margin-top: 0em;
        margin-bottom: 0.8em;
        background: none;
        color: #000000;
    Is there some way to get the editor to understand a normal HTML definition, or does it just not support such things?
    BTW -- As a side note, given the environment at my workplace, it probably would be impractical to use an HTML editor other than RoboHelp's.
    Thanks.

    Another possibility is TextWrangler. Here is a link: http://www.barebones.com/products/textwrangler/textwranglertext.shtml

  • UBL in PI

    Hi everybody,
    We are going to make an integration with a service which waits for a UBL standard and sents a UBL standard XML. So we will sent and receive files in UBL standard.
    Is UBL supported in PI? In some threads it says it is, and in some it says it isn't. Its confusing. Is there someone who has done this before?
    Thanks.

    Hi.
    It seems to be supported. There's a documentation that may help you.
    You can find this documentation in SAP Community Network (SDN) at
    https://www.sdn.sap.com/irj/sdn -> SOA Middleware -> SOA
    Management -> Service Configuration and Monitoring -> SAP NetWeaver
    Process Integration 7.1 - Configuring Web Service Scenarios (Guide).
    Regards,
    Caio

  • How to find the max data transfer rate(disk speed) supported by mobo?

    I plan on replacing my current HDD with a new and bigger HDD.
    For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
    Here's dmidecode:
    # dmidecode 2.11
    SMBIOS 2.5 present.
    80 structures occupying 2858 bytes.
    Table at 0x000F0450.
    Handle 0xDA00, DMI type 218, 101 bytes
    OEM-specific Type
    Header and Data:
    DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
    00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
    00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
    01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
    00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
    00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
    FF 00 00 00 00
    Handle 0xDA01, DMI type 218, 35 bytes
    OEM-specific Type
    Header and Data:
    DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
    00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
    00 00 00
    Handle 0x0000, DMI type 0, 24 bytes
    BIOS Information
    Vendor: Dell Inc.
    Version: A17
    Release Date: 04/06/2010
    Address: 0xF0000
    Runtime Size: 64 kB
    ROM Size: 4096 kB
    Characteristics:
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    EDD is supported
    Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    ACPI is supported
    USB legacy is supported
    BIOS boot specification is supported
    Function key-initiated network boot is supported
    Targeted content distribution is supported
    BIOS Revision: 17.0
    Handle 0x0100, DMI type 1, 27 bytes
    System Information
    Manufacturer: Dell Inc.
    Product Name: OptiPlex 755
    Version: Not Specified
    UUID: 44454C4C-5900-1050-8033-C4C04F434731
    Wake-up Type: Power Switch
    SKU Number: Not Specified
    Family: Not Specified
    Handle 0x0200, DMI type 2, 8 bytes
    Base Board Information
    Manufacturer: Dell Inc.
    Product Name: 0PU052
    Version:
    Handle 0x0300, DMI type 3, 13 bytes
    Chassis Information
    Manufacturer: Dell Inc.
    Type: Space-saving
    Lock: Not Present
    Version: Not Specified
    Asset Tag:
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    Handle 0x0400, DMI type 4, 40 bytes
    Processor Information
    Socket Designation: CPU
    Type: Central Processor
    Family: Xeon
    Manufacturer: Intel
    ID: 76 06 01 00 FF FB EB BF
    Signature: Type 0, Family 6, Model 23, Stepping 6
    Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    CLFSH (CLFLUSH instruction supported)
    DS (Debug store)
    ACPI (ACPI supported)
    MMX (MMX technology supported)
    FXSR (FXSAVE and FXSTOR instructions supported)
    SSE (Streaming SIMD extensions)
    SSE2 (Streaming SIMD extensions 2)
    SS (Self-snoop)
    HTT (Multi-threading)
    TM (Thermal monitor supported)
    PBE (Pending break enabled)
    Version: Not Specified
    Voltage: 0.0 V
    External Clock: 1333 MHz
    Max Speed: 5200 MHz
    Current Speed: 2666 MHz
    Status: Populated, Enabled
    Upgrade: Socket LGA775
    L1 Cache Handle: 0x0700
    L2 Cache Handle: 0x0701
    L3 Cache Handle: Not Provided
    Serial Number: Not Specified
    Asset Tag: Not Specified
    Part Number: Not Specified
    Core Count: 2
    Core Enabled: 2
    Thread Count: 2
    Characteristics:
    64-bit capable
    Handle 0x0700, DMI type 7, 19 bytes
    Cache Information
    Socket Designation: Not Specified
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 32 kB
    Maximum Size: 32 kB
    Supported SRAM Types:
    Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: None
    System Type: Data
    Associativity: 8-way Set-associative
    Handle 0x0701, DMI type 7, 19 bytes
    Cache Information
    Socket Designation: Not Specified
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Varies With Memory Address
    Location: Internal
    Installed Size: 6144 kB
    Maximum Size: 6144 kB
    Supported SRAM Types:
    Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: <OUT OF SPEC>
    Handle 0x0800, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: PARALLEL
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: DB-25 female
    Port Type: Parallel Port PS/2
    Handle 0x0801, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: SERIAL1
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: DB-9 male
    Port Type: Serial Port 16550A Compatible
    Handle 0x0802, DMI type 126, 9 bytes
    Inactive
    Handle 0x0803, DMI type 126, 9 bytes
    Inactive
    Handle 0x0804, DMI type 126, 9 bytes
    Inactive
    Handle 0x0805, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB1
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x0806, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB2
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x0807, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB3
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x0808, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB4
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x0809, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB5
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x080A, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB6
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x080B, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB7
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x080C, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: USB8
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Access Bus (USB)
    Port Type: USB
    Handle 0x080D, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: ENET
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: RJ-45
    Port Type: Network Port
    Handle 0x080E, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: MIC
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port
    Handle 0x080F, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: LINE-OUT
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port
    Handle 0x0810, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: LINE-IN
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port
    Handle 0x0811, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: HP-OUT
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port
    Handle 0x0812, DMI type 8, 9 bytes
    Port Connector Information
    Internal Reference Designator: MONITOR
    Internal Connector Type: None
    External Reference Designator: Not Specified
    External Connector Type: DB-15 female
    Port Type: Video Port
    Handle 0x090A, DMI type 9, 13 bytes
    System Slot Information
    Designation: SLOT1
    Type: x1 Proprietary
    Current Usage: In Use
    Length: Long
    Characteristics:
    PME signal is supported
    Handle 0x0901, DMI type 126, 13 bytes
    Inactive
    Handle 0x0902, DMI type 9, 13 bytes
    System Slot Information
    Designation: SLOT2
    Type: 32-bit PCI
    Current Usage: Available
    Length: Long
    ID: 2
    Characteristics:
    5.0 V is provided
    3.3 V is provided
    PME signal is supported
    Handle 0x0903, DMI type 126, 13 bytes
    Inactive
    Handle 0x0904, DMI type 126, 13 bytes
    Inactive
    Handle 0x0905, DMI type 126, 13 bytes
    Inactive
    Handle 0x0906, DMI type 126, 13 bytes
    Inactive
    Handle 0x0907, DMI type 126, 13 bytes
    Inactive
    Handle 0x0908, DMI type 126, 13 bytes
    Inactive
    Handle 0x0A00, DMI type 10, 6 bytes
    On Board Device Information
    Type: Video
    Status: Disabled
    Description: Intel Graphics Media Accelerator 950
    Handle 0x0A02, DMI type 10, 6 bytes
    On Board Device Information
    Type: Ethernet
    Status: Enabled
    Description: Intel Gigabit Ethernet Controller
    Handle 0x0A03, DMI type 10, 6 bytes
    On Board Device Information
    Type: Sound
    Status: Enabled
    Description: Intel(R) High Definition Audio Controller
    Handle 0x0B00, DMI type 11, 5 bytes
    OEM Strings
    String 1: www.dell.com
    Handle 0x0D00, DMI type 13, 22 bytes
    BIOS Language Information
    Language Description Format: Long
    Installable Languages: 1
    en|US|iso8859-1
    Currently Installed Language: en|US|iso8859-1
    Handle 0x0F00, DMI type 15, 29 bytes
    System Event Log
    Area Length: 2049 bytes
    Header Start Offset: 0x0000
    Header Length: 16 bytes
    Data Start Offset: 0x0010
    Access Method: Memory-mapped physical 32-bit address
    Access Address: 0xFFF01000
    Status: Valid, Not Full
    Change Token: 0x00000018
    Header Format: Type 1
    Supported Log Type Descriptors: 3
    Descriptor 1: POST error
    Data Format 1: POST results bitmap
    Descriptor 2: System limit exceeded
    Data Format 2: System management
    Descriptor 3: Log area reset/cleared
    Data Format 3: None
    Handle 0x1000, DMI type 16, 15 bytes
    Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: None
    Maximum Capacity: 8 GB
    Error Information Handle: Not Provided
    Number Of Devices: 4
    Handle 0x1100, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x1000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_1
    Bank Locator: Not Specified
    Type: DDR2
    Type Detail: Synchronous
    Speed: 667 MHz
    Manufacturer: AD00000000000000
    Handle 0x1101, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x1000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_3
    Bank Locator: Not Specified
    Type: DDR2
    Type Detail: Synchronous
    Speed: 667 MHz
    Handle 0x1102, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x1000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_2
    Bank Locator: Not Specified
    Type: DDR2
    Type Detail: Synchronous
    Speed: 667 MHz
    Handle 0x1103, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x1000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_4
    Bank Locator: Not Specified
    Type: DDR2
    Type Detail: Synchronous
    Speed: 667 MHz
    Handle 0x1300, DMI type 19, 15 bytes
    Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x000FDFFFFFF
    Range Size: 4064 MB
    Physical Array Handle: 0x1000
    Partition Width: 1
    Handle 0x1400, DMI type 20, 19 bytes
    Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0007FFFFFFF
    Range Size: 2 GB
    Physical Device Handle: 0x1100
    Memory Array Mapped Address Handle: 0x1300
    Partition Row Position: 1
    Interleave Position: 1
    Interleaved Data Depth: 1
    Handle 0x1401, DMI type 20, 19 bytes
    Memory Device Mapped Address
    Starting Address: 0x00080000000
    Ending Address: 0x000FDFFFFFF
    Range Size: 2016 MB
    Physical Device Handle: 0x1101
    Memory Array Mapped Address Handle: 0x1300
    Partition Row Position: 1
    Interleave Position: 1
    Interleaved Data Depth: 1
    Handle 0x1402, DMI type 20, 19 bytes
    Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0007FFFFFFF
    Range Size: 2 GB
    Physical Device Handle: 0x1102
    Memory Array Mapped Address Handle: 0x1300
    Partition Row Position: 1
    Interleave Position: 2
    Interleaved Data Depth: 1
    Handle 0x1403, DMI type 20, 19 bytes
    Memory Device Mapped Address
    Starting Address: 0x00080000000
    Ending Address: 0x000FDFFFFFF
    Range Size: 2016 MB
    Physical Device Handle: 0x1103
    Memory Array Mapped Address Handle: 0x1300
    Partition Row Position: 1
    Interleave Position: 2
    Interleaved Data Depth: 1
    Handle 0x1410, DMI type 126, 19 bytes
    Inactive
    Handle 0x1800, DMI type 24, 5 bytes
    Hardware Security
    Power-On Password Status: Enabled
    Keyboard Password Status: Not Implemented
    Administrator Password Status: Enabled
    Front Panel Reset Status: Not Implemented
    Handle 0x1900, DMI type 25, 9 bytes
    System Power Controls
    Next Scheduled Power-on: *-* 00:00:00
    Handle 0x1B10, DMI type 27, 12 bytes
    Cooling Device
    Type: Fan
    Status: OK
    OEM-specific Information: 0x0000DD00
    Handle 0x1B11, DMI type 27, 12 bytes
    Cooling Device
    Type: Fan
    Status: OK
    OEM-specific Information: 0x0000DD01
    Handle 0x1B12, DMI type 126, 12 bytes
    Inactive
    Handle 0x1B13, DMI type 126, 12 bytes
    Inactive
    Handle 0x1B14, DMI type 126, 12 bytes
    Inactive
    Handle 0x2000, DMI type 32, 11 bytes
    System Boot Information
    Status: No errors detected
    Handle 0x8100, DMI type 129, 8 bytes
    OEM-specific Type
    Header and Data:
    81 08 00 81 01 01 02 01
    Strings:
    Intel_ASF
    Intel_ASF_001
    Handle 0x8200, DMI type 130, 20 bytes
    OEM-specific Type
    Header and Data:
    82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
    00 00 00 00
    Handle 0x8300, DMI type 131, 64 bytes
    OEM-specific Type
    Header and Data:
    83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
    F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
    19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
    00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
    Handle 0x8800, DMI type 136, 6 bytes
    OEM-specific Type
    Header and Data:
    88 06 00 88 5A 5A
    Handle 0xD000, DMI type 208, 10 bytes
    OEM-specific Type
    Header and Data:
    D0 0A 00 D0 01 03 FE 00 11 02
    Handle 0xD100, DMI type 209, 12 bytes
    OEM-specific Type
    Header and Data:
    D1 0C 00 D1 78 03 07 03 04 0F 80 05
    Handle 0xD200, DMI type 210, 12 bytes
    OEM-specific Type
    Header and Data:
    D2 0C 00 D2 F8 03 04 03 06 80 04 05
    Handle 0xD201, DMI type 126, 12 bytes
    Inactive
    Handle 0xD400, DMI type 212, 242 bytes
    OEM-specific Type
    Header and Data:
    D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
    01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
    11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
    00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
    23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
    F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
    30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
    05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
    00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
    25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
    F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
    04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
    5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
    A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
    37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
    00 00
    Handle 0xD401, DMI type 212, 172 bytes
    OEM-specific Type
    Header and Data:
    D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
    02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
    28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
    00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
    59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
    FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
    80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
    EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
    00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
    53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
    BF 00 69 01 56 BF 40 FF FF 00 00 00
    Handle 0xD402, DMI type 212, 152 bytes
    OEM-specific Type
    Header and Data:
    D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
    01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
    90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
    00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
    27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
    BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
    02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
    2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
    01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
    65 FC 01 FF FF 00 00 00
    Handle 0xD403, DMI type 212, 157 bytes
    OEM-specific Type
    Header and Data:
    D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
    00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
    1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
    01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
    52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
    DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
    00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
    06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
    02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
    52 BF 40 45 02 52 BF 00 FF FF 00 00 00
    Handle 0xD800, DMI type 126, 9 bytes
    Inactive
    Handle 0xDD00, DMI type 221, 19 bytes
    OEM-specific Type
    Header and Data:
    DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
    00 00 00
    Handle 0xDD01, DMI type 221, 19 bytes
    OEM-specific Type
    Header and Data:
    DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
    00 00 00
    Handle 0xDD02, DMI type 221, 19 bytes
    OEM-specific Type
    Header and Data:
    DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
    00 00 00
    Handle 0xDE00, DMI type 222, 16 bytes
    OEM-specific Type
    Header and Data:
    DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
    Handle 0x7F00, DMI type 127, 4 bytes
    End Of Table
    Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf  says that it is 3.0Gb/s
    and here's hdparm -I /dev/sda
    /dev/sda:
    ATA device, with non-removable media
    Model Number: WDC WD800JD-75JNC0
    Firmware Revision: 06.01C06
    Standards:
    Supported: 6 5 4
    Likely used: 8
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 156250000
    Logical/Physical Sector size: 512 bytes
    device size with M = 1024*1024: 76293 MBytes
    device size with M = 1000*1000: 80000 MBytes (80 GB)
    cache/buffer size = 8192 KBytes
    Capabilities:
    LBA, IORDY(can be disabled)
    Standby timer values: spec'd by Standard, with device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 8
    Recommended acoustic management value: 128, current value: 254
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    * SMART feature set
    Security Mode feature set
    * Power Management feature set
    * Write cache
    * Look-ahead
    * Host Protected Area feature set
    * WRITE_BUFFER command
    * READ_BUFFER command
    * DOWNLOAD_MICROCODE
    SET_MAX security extension
    Automatic Acoustic Management feature set
    * Device Configuration Overlay feature set
    * Mandatory FLUSH_CACHE
    * SMART error logging
    * SMART self-test
    * Gen1 signaling speed (1.5Gb/s)
    * Host-initiated interface power management
    * SMART Command Transport (SCT) feature set
    * SCT Long Sector Access (AC1)
    * SCT LBA Segment Access (AC2)
    * SCT Error Recovery Control (AC3)
    * SCT Features Control (AC4)
    * SCT Data Tables (AC5)
    Security:
    Master password revision code = 65534
    supported
    not enabled
    not locked
    frozen
    not expired: security count
    not supported: enhanced erase
    Checksum: correct
    Last edited by Inxsible (2011-03-27 04:40:49)

    I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
    So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
    Anyhoo, while I was in the BIOS I found two things which I had questions about :
    1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
    2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
    I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Maybe you are looking for