IS-Oil and IS Gas on same server

Dear Experts ,
Please throw some light on the requirement that company has 2 distinct identity gas and oil. servers are being installed in parent company which is oil sector . Now they want to make a separate client in the existing servers for gas. Does this have any impact
on the future operations, and whether it is a part of best practice or not .
Regards
Rajat

The connector server for AD has to run on a Windows platform system as it uses .NET but it does not have to be on your domain controller. We run the connector server and the AD domain on separate hosts.

Similar Messages

How to install both solution manager and ECC Development on same server

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

How to Install R/3 and CRM on the same Server?

Hi All,
I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
I would like to have some instructions how to have them installed on the same server.
Thanks in advance.
Regards,
Vijay

As Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations with R3 system .
But I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
as application servers will have 3 individual mount point which points to different system
<Central Instance>:/sapmnt/<SID>/global
<Central Instance>:/sapmnt/<SID>/prfoile
<Central Instance>:/sapmnt/<SID>/exe
each SID NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
Trans directory is problem - but it does not require either for installation (or) for runningAS instance .

Installation of EBS 12.1 and Database on the same server

Hi,
Due to resource crunch, I would like to do new installation of EBS 12.1 and Database on the same server where already EBS 12.1 and Database installed.
I have one server where EBS 12.1 and Database installed (Single node installation).
Now I want to create another environment for other purpose (another test env.). But I don't have another server .
So Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.
Are the installtion conflict with each other ? any implications happen on the first environment ?
I want my first environment run fine without any prob., after installing EBS and DB on the same server.
Please guide me.
Regards,
Sanjay Patel

So Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.Yes you can as long as you have sufficient resources.
Are the installtion conflict with each other ? any implications happen on the first environment ? If you install in different ORACLE_HOMEs you should be OK.
Thanks,
Hussein

Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)

I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathew

error in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down

Best Practice for SUP and WSUS Installation on Same Server

Hi Folks,
I have a question, I am in process of deploying SCCM 2012 R2... I was in process of deploying Software Update Point on SCCM with one of the existing WSUS server installed on a separate server from SCCM.
A debate has started with of the colleague who says that the using remote WSUS server is recommended by Microsoft because of the scalability security that WSUS will be downloading the updates from Microsoft and SCCM should be working as downstream
server to fetch updates from WSUS server.
but according to my consideration it is recommended to install WSUS server on the same server where SCCM is installed... actually it is recommended to install WSUS on a site system and you can used the same SCCM server to deploy WSUS.
please advice me the best practices for deploying SCCM and WSUS ... what Microsoft says about WSUS to be installed on same SCCM server OR WSUS should be on a separate server then the SCCM server ???
awaiting your advices ASAP :)
Regards, Owais

Hi Don,
thanks for the information, another quick one...
the above mentioned configuration I did is correct in terms of planning and best practices?
I agree with Jorgen, it's ok to have WSUS/SUP on the same server as your site server, or you can have WSUS/SUP on a dedicated server if you wish.
The "best practice" is whatever suits your environment, and is a supported-by-MS way of doing it.
One thing to note, is that if WSUS ever becomes "corrupt" it can be difficult to repair and sometimes it's simplest to rebuild the WSUS Windows OS. If this is on your site server, that's a big deal.
Sometimes, WSUS goes wrong (not because of ConfigMgr)..
Note that if you have a very large estate, or multiple primary site servers, you might have a CAS, and you would need a SUP on the CAS. (this is not a recommendation for a CAS, just to be aware)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Sender and receiver on the same server

Good morning!
We plan a TDTIM for 2 different SIDs but with their Oracle DBs on the same server (NOT MCOD).
If we use them as the sender and receiver respectively, any concern about the performance?
Any other concerns?
We know that TDMS within the same SID but different clients is NOT recommended.
Our TDMS server is on a seperated box.
Thanks for sharing your experience.

As the hardware resources will be shared, you need to make sure -
> the box has optimum resources to handle large data transfer volume.
> the system and DB parameters are set correctly. There is a note to suggest these setting for high volume data transfer.
> avoid two data intensive steps to run in parallel, for example do not run receiver deletion and data selection in parallel.

Installing BOE XI 3.1 and Data Services on same server, recommended or not?

I am fairly new to the BusinessObjects world.
I have been told that it is not recommended that both BOE and Data Services exist on the same server. I was just wondering if
there is any documentation (best practice) or technical reason why these two could not coexist on the same server so that I can provide that to our server administrators.
Thanks in advance for the assistance.
-Abel Duran

Hello,
you can do that for Test and Integration Environmenr but i would not recommend it on Production.
I noticed that not the RAM utilization is the "problem" with DS its more the Disk I/O. If you have the Filestore from BOE on the same physikal Disk as the JobServer from DS your Reportviewieng could be a bit slower.
Regards
-Seb.

How to create production and development enironment in same server

Hi All,
We are using OWB10.2.0.1 version and we have only one database which has two schema.we are using default control center to run the mappings.
We don't have separate servers for development and production.So we use same control center for running the mapping for production and development, cause of this we are getting some problem while changing the existing mapping.
So we are planing to separate these environment like production and development with in one server and both environment should have the same database and we need to lock the some mapping to development environment which is in live.
Please suggest me how can i follow because i don't have EXP in these area.Hope you understand the situation.
Thanks,
Kumar.

Hi,
I am not sure if we can lock the mapping according tot he env. you log into. I can provide an alternate solution by using different project names and store the mapping into them or using different mapping names to indicate them as prod or dev maps.
From a developer perspective i would suggest u have different environments for dev and prod and as a manager i would like to inform that u have have many audit issues if this goes on.
Regards,
Bharath

SUP and WSUS on the same server.

Hi,
My SCCM environment as follows:
Windows Server 2012 R2 Standard, Configuration Manager 2012 R2, SQL 2012 SP1 CU7
WSUS 6.3.9600.163.84 . All these running on the same server.
SCCM SUP role is enabled, WSUS using SQL Express database. This is Central and Primary site server as well.
Issue is:
1. SUP does not get updates. SUP is configured to get updates from Internet and WSUS console Sync options pointing to its own server name. I tried to change WSUS console sync option to internet couple of times but it looks WSUS changes this back.
2. I want to use WSUS/SUP for SCCM Endpoint definitions update and also for patch installation for clients (Clients Windows update pointing to this server)

What do you mean that this is a Central and Primary site server? Those two roles can not be installed on the same site server.
When it comes to SUP in ConfigMgr, the installation process on WS 2012 is basically this:
1. Install the Windows Server Update Services role, run the initial configuration wizard.
2. Install a SUP site system role on the server and let ConfigMgr configure everything.
Additionally I'd not run a SQL Express for the WSUS since you already have SQL installed. Instead I'd create the SUSDB on the same SQL server that you're running the ConfigMgr DB on.
In my preprequisites installation tool, all you need to do is to open a PowerShell console, run the tool and click on the Install WSUS button, specify the SQL Server and the tool will automatically configure everything. When the tool has completed, you can
go ahead and add the SUP from ConfigMgr and configure it from the ConfigMgr console.
You'll find the tool here:
http://gallery.technet.microsoft.com/ConfigMgr-2012-R2-e52919cd
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

Install Oracle 11i Suite and Oracle 10g on same Server

Hi
We are an Educational firm planning to launching Oracle 11i and 10g.
Can I install both the Oracle 11i E-Business Suite and Oracle 10g on the same Server? If it can What is best configuration for the Server that can I bought?
provide Configuration too.
thanks

"However, I do not suggest any windows platform for 11i as that is not so good os for 11i. You may either go far unix or linux" - 140042
That's absolutely right. It is better to have at least two linux/unix machines:
# 1 machine for application server - admin, web, form, concurrent services
# 2 machine for DB server
If you want, you may integrate Oracle apps 11.5.10 (on #1 and # machines) with OracleAS 10g (# machine).

Solution Manager and SAP ECC on same server

Hi Experts,
I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
But can I use same mount folders?
Kindly highlight your experience and knowledge on this point?
Thank you so much
Regards,
LuongDK

>
LuongDK wrote:
> Hi Experts,
>
> I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
> But can I use same mount folders?
>
> Kindly highlight your experience and knowledge on this point?
>
> Thank you so much
> Regards,
> LuongDK
Hello LuongDK,
Please refer to the FAQ section on http://service.sap.com/solutionmanager, Check the installations section:
Which system should I use to install SAP Solution Manager?
The system has to be dedicated to the SAP Solution Manager. No other components can be installed on top of SAP Solution Manager.
SAP Solution Manager does not necessarily require separate hardware. It can be installed as a separate instance on an existing hardware.
This means that the hardware can be shared if it is sufficient to support 2 systems. However a MCOD option is not recommended at all.
Regards
Amit

APO and BW in the same server, is possible?

Hi Experts,
We have an BW 7.0 installation, and we are thinking about to install APO in the same server.
- Is this possible?
- Is there any application that integratte BI (Netweaver 2004s) and SCM-APO?
- I will have only one login or are the separate applications with individual user and loggin?
>> Could you give me any link with sap recomendations about this?
Thank you in advance!

Hello,
BW is integral part of APO system & this is mainly used for APO Applications (DP). However yau may not be able to load APO on server where BW is already in place.
In case you are using BW extensively for other application, recommendation is to have independant BW sytem.
with regards
Mangesh A. Kulkarni

Exchange 2013 Windows Server 2012 NLB and DAG on the same server

Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Oracle10g and 8i on the same server

Hello,
I have seen a similar message but prefer ask my question because
I have to installer Oracle8i and Oracle10g Rel. 2 on a HP-UX 11.11 server.
Is it possible on the same server ?
by creating two different oracle_home ?
Aren't any compatibility problem ? Concerning the system, due to prequires ?
Regards,
Olivier
Message was edited by:
user556666

Ok, thanks.
It is by creating two different oracle_home ?
there aren't any compatibility problem ? Concerning the system, due to prequires ?

IS-Oil and IS Gas on same server

Similar Messages

Maybe you are looking for