IS Oil specific Sales Order Creation thru any Function Module

Hi All,
Do you know any FM which can be used to create Sales Orders for Oil specific values.
there is a FM which creates the Sales Contracts - RFC_SDCONOIL_CREATEFROMDATA. Can we use this FM to create the Sales Orders.
Thanks
Pankaj

Hi Pankaj,
You can use the TAS function module OIK_SD_CALLOFF_CREATE for creating a sales call-off with Oil specific values.
There is no documentation for the function module. You would have to browse through the FM to know the usage for your requirements.
If you need an example for using the function module you can look at the TSW FM OIJ_EL_DOCG_CREATE_SD_CALLOFF. This function module is used for creating a call-off through TSW ticketing..
Best Regards
Vishnu

Similar Messages

  • How many table are affected when sales order creation(O2C)

    Hi all,
             HOw many table are affected when sales order creation, can any one please help ,and please give me a description indepth please please. I know some of the table affected
    Thanks&Regrads,
    Surya

    Hi Kantur Shekar madhuri,
    Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
    if not please activate and re run your scenario.
    Regards
    Arun

  • Is their any standard web dynpro component for Sales Order Creation

    Hi ,
          I want to  create a web dynpro component for Sales order creation.So i want to know is their any stardard web dynrpo component to use or we need to develop custom component.
    Thanks & Regards,
      Aditya Tanguturi.

    Hi Aditya,
    There is a standard component for Sales order maintenance : LORD_MAINTAIN_COMP
    Note: It is also used to create / change /display the quotation/inquiry as well
    Regards,
    Rama
    Message was edited by: Ramakrishnappa Gangappa

  • Restricting Sales Order Creation for Customers with specific AccountGroup

    Hi
    We have 2 Accont Groups for Customers namely Actual & Prospective.
    We wish to allow Enquiry / Quotation and Order creation for customers with Account Group ACTUAL and wish to allow only Enquiry and Quotation creation for customers with Account Group as Prospective.Is there anyway i can apply Sales Order creation block on an ACCOUNT GROUP on whole and not on Individual customers...
    Regards
    Sanjeev Bagaria

    Hello
    I did this through Listing Inclusion / Exclusion.
    (1) We created a new Customer Group 99 for Prospective Customer
    (2) We then created a new Condition table xxx with Customer Group & Material Type(as footer)
    (3) We then created this new Access Sequence Customer Group / Material Type to Exclusion Procedure B00001
    (4) We then assign the Exclusion Type B00001 to Sales Documents ZDOM & ZEOR our Order Sales Documetn Types
    (5) And finally we created a record for Exclusion with 99 Customer Group and Material Type as FERT..
    This now restricts creation of Sales Orders for all my Prospective Customers provided Customer Group is maintained in Customer Master. We are now also able to make Enquiry / Quotation and Sample Sales Order for Prospective Customers sicne we have Different Sales Document Types for all these and have assigned Exclusion only to normal Sales Order Document Type.
    Thanks a lot for all the suggestions provided.
    Regards
    Sanjeev

  • BAPI for Sales Order Creation.

    Hello gurus,
    I want to create a sales order using BAPI.
    I have tried some BAPI's like BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPI_SALESDOCU_CREATEWITHDIA.
    But I am not able to update the Miscellaneous Information like Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
    Is there any other BAPI thru which i can update these fields while creation of Sales Order.
    The Fields which I can provide to BAPI as import parameter is:
    Order Type(VBAK-AUART),
    Contract(VBAK_VGBEL),
    SALES Org (VBAK-VGORT),
    Dist Channel(VBAK-VTWEG),
    Division (VBAK-SPART),
    Open Quantity (VBAK-KWMENG)
    Plant(VBAP-WERKS)
    Storage Location (VBAP-LGORT)
    Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
    Thanks In Advance,
    Points will be rewarded for Best Solution......
    Yogesh Sharma

    hi,
    I can give u a suggestion .. try it ..
    its a quite a long process....
    in BAPI_SALESORDER_CREATEFROMDAT2
    there is a table EXTENSIONIN...
    here u can add append structure and carry on ur sales order creation
    Follow the process
    Customer Enhancement for VBAK, VBAP, VBEP
    Description
    You can use this parameter to transfer user-specific enhancments to a BAPI. The customer has to complete the EXTENSION structure and the system automatically continues processing it. If you have not defined any user-specific fields, then you can transfer a blank EXTENSIONIN structure.
    Technical information about Customer Enhancements
    The following description uses an example to explain how to proceed with customer enhancements to the SD tables VBAK, VBKD, VBAP and VBEP.
    The customer has added their own fields to table VBAP using the INCLUDE structure CUTEST. This structure contains 2 fields:
    CFIELD1, CHAR 10
    CFIELD2, CHAR 3.
    The customer also requires that these two fields can be maintained with the BAPI.
    1. Maintain structure CUTEST in table VBAP
    2. Because the BAPIs work with checkboxes, you must also define a CUTESTX checkbox for the customer structure. It should be structured like this:
    Field name       Data element
    CFIELD1            CHAR1
    CFIELD2          CHAR1
    3. Define these customer structures in the structures VBAPKOZ und VBAPKOZX using INCLUDE or APPEND.
    4. Add the customer structures to the BAPE_VBAP and BAPE_VBAPX BAPI structures using the APPEND technique.
    5. Adjust the following structures for customer enhancements to table VBAK:
    a) VBAKKOZ
    b) VBAKKOZX
    c) BAPE_VBAK
    d) BAPE_VBAKX
    6. Adjust the following structures for customer enhancements to table VBEK:
    a) VBEPKOZ
    b) VBEPKOZX
    c) BAPE_VBEP
    d) BAPE_VBEPX
    7. Generally, the data should be added to the BAPI interface in the internal communication structures (VBAKKOM, and so on). There, you can process the data in the SD tables (VBAK, and so on).
    8. If the EXTENSIONIN parameter contains customer data, you must complete at least the key fields in the relevant standard parameters.
    For example:
    You want to change customer field VBAP-CFIELD2 for item 20 to "XYZ" in order 4711.
    The following entries are expected:
    Import:     BAPIVBELN-VBELN       = '0000004711'  Document number
                BAPISDHD1X-UPDATEFLAG = 'U'           UPDKZ for doc header
    Tables:     BAPISDITM-ITM_NUMBER  = '000020'      Item number
                BAPISDITMX-ITM_NUMBER = '000020'      Item number
              + BAPISDITMX-UPDATEFLAG = 'U'           UPDKZ for item
    You must complete the EXTENSION table as follows:
    STRUCTURE                          VALUEPART1       1234561234567890123
    BAPE_VBAP                       0000004711000020                 XYZ
    BAPE_VBAPX                      0000004711000020       X
    Further Information
    You can find more information in the BAPI programming guide in the chapter for enhancements to BAPIs.
    Notes
    You must complete the STRUCTURE field with the name of the relevant enhancement structure (BAPE_VBAK, BAPE_VBAP, BAPE_VBEP). You can complete the remaining fields with the append structures from the enhancement structures.
    At the moment, you can use the BAPI to store enhancements in the following structures:
    VBAK : An enhancement to header data requires an append structure to BAPE_VBAK and an enhancement to structure VBAKKOZ.
    VBAP : An enhancement to item data requires an append structure to BAPE_VBAP and an enhancment to structure VBAPKOZ.
    VBEP : An enhancement to schedule line data requires an append structure to BAPE_VBEP and an enhancement to structure VBEPKOZ.
    VBKD : If you are using an enhancement for header data, you must add an append structure to BAPE_VBAK. You also need to enhance structure VBAKKOZ. If it is for item data, you need to add an append structure to BAPE_VBAP. You must also enhance structure VBAPKOZ.
    If you also want to work with checkboxes, each X-structure must also contain an append structure.
    For example:
    A customer has created an order and wants to include the material long text (50 digits long).
    The EXTENSIONIN structure must be completed with BAPE_VBAP. Two fields have fixed definitions in this structure. These are in the VBAP host key (VBELN, POSNR). The customer sets up an append structure that contains field ZMAT50.
    Because the VBELN is normally blank when you create an order, the data can look like this:
    STRUCTURE   |BAPE_VBAP
    VALUEPART1  |          000010Customermateriallongtext50
                  VBELN     POSNR ZMAT50

  • Change Transportation Zone in Sales Order creation

    Hi Gurus,
    I am looking for an user-exit to overwrite the transportation zone for the ship-to party while creating the Sales order.
    Actually the order is getting created thru IDOC. The segment E1EDKA1 with PARVW 'WE' contains all the data including name, street, city, phone etc. But there is no option(field) to send this transporation zone (LZONE). In the sale order creation program, it is automatically picking it up from VBPA for the customer. I need to overwrite this one with a different value. Is there any User-exit available to accomplish?
    For your information its PO-SO process. A KBZI order will be created. Using the PR generated from this order, we need to create the PO that in turns automatically creating an Intercompany Sales Order ( thru IDoc). In this second Sales Order, I need to overwrite the transportation zone based on the initial order.
    Thanks in advance,
    Vijay.

    >
    Murphy wrote:
    > I modified the value at runtime KUVEW-LZONE. But this values is keep on getting modified by XVBPA-LZONE for the customers...
    How about if we modifiy the value of XVBPA-LZONE itself at runtime in Routine either USEREXIT_SAVE_DOCUMENT or USEREXIT_SAVE_DOCUMENT_PREPARE?
    See if the values of KUVEW-LZONE or XVBPA-LZONE in our hand in above exit?

  • User exit to control the sales order creation

    Hi All,
    I have a business scenario, where a specific account group customers Business doesn't want to sell the goods .SAP should not allow you to create a sales order.
    Which user exit will solve my requirement?
    could you please help me..
    Regards,
    SK

    Hi Prakash,
    Thanks for the reply. Actually these customers are created as a Agents and we are using these customers in Commission rebates. So at the time of Rebate partial credit memo, then these agents should be active otherwise system will give the error.
    So what i am thinking is, Standard sales order creation needs to be restricted so that users can not able to create standard order.
    So can you suggest is there any user exit can be used to prevent creation of standard order for these account group and order type xxx?
    Regards,
    SK

  • Sales order creation -pricing- IDOC processing

    Hi All,
    Issue is related to pricing procedure and condition types while processing the IDOC for sales order creation.
    The condition type ZSTD maintained in the pricing procedure AAAA, has reference condition type as ZZZZ, when we are processing IDOC, system is throwing error as " condition type ZZZZ, is not maintained for A V AAAA.
    This error will not populate when we create the sales order manually.
    Kindly let me know if programs needs to be checked and or any configuration mistakes involved in this.
    Regards,
    SAN

    >
    Vivek Baddula wrote:
    > Hey Teju,
    >
    > Could you pls put me the block of code how you are populating to the idoc edidd. So that we can guide you.
    >
    > And also tell me the message status 51 in IDoc what it is showing , and also see the segment( maybe E2EDP05)  specific  to pricing for the IDoc  you populated.
    >
    > Regards,
    >
    > Vvieks
    >
    > 'Grow and help others to Grow'
    Vivek,
    Thanks for the reply.
    Status 51 reads "condition ZPRL is missing in pricing procedure A V ZPRINT, WE are not passing any value as a part of tsting. The system should pick price values from condtion record.

  • Capacity check during sale order creation

    hi,
      i have the following doubts,
    1. During sale order creation i need capacity availability check for that i make settings, its working good,if i put the order in the evening time but system take the start time as morning shift starting time.can any one guide me to take the time as the order creation time. and also help me how the system check the capacity.
    2. During sale order creation , if suppose capacity is loaded means it will show a pop up with the name capacities with overload,
      Here i need the clarification how the system calculate the requirements and requirements order, capacity load, from where the system get the information for these calculation.
    Muthamil

    Hello, you are working with a make to order scenario, that means that a planned / production order must be created to address specifically your customer requirement ??
    By standard SAP you can have a capacity availabily check once the production order is in the creation phase....but this should be too late for you.....

  • Update error in  RV_SALES_DOCUMENT_ADD during Sales order creation

    I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
    This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
    Am I missing any configuration parameters?
    Thanks,
    Chitra

    Yes , I can see the error in ST22.
    While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
    - I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
        Analysis of error shows:
         Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
          Fails in the Read table in one of the form
            Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
    The main program was "RSM13000 ". In the source code you have the termination point in
    line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
    of the (Include) program "LV45UF0V".
    The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
    Thanks,
    Csuman

  • Sales order creation for a project

    Dear all,
    I would like to know how to create quotation ,sales order, delivery and Billing for a total project. Let me explain the situation.. Customer has 4 different product.. they have 4 Plants to produce those materials.. They will sell each products individually and combination of others also. Their sales process is Customer will place an order for the total project which involves supply erection and Training. The erection and training may take 3 months to 1 year. The requirement is customer wants to create quotation and sales order creation in SAP. Also they want to map the erection and Training in SAP. They would like to capture the expenses involved during the erection and Training period. In this case excise duty, Sales Tax and service Tax all are involved in the same project.
    Can any one suggest some idea
    Thanks in advance
    Sriram

    Hi,
    It is understood that your client has 4 plants for 4 different materials. Your client sells materials and service (1.Installation of equipment and 2.Training the users). Your client wants to know the cost of the sold items (Materials and services). The billings are subjected to all applicable taxes.
    As you know, these requirements can be mapped in SAP by SD and PS modules.
    SD Module: Whatever the customer places the order (either partially or as total), you can create quotations. The materials are finished goods (FERT) and service materials (DIEN). The pricing procedure should consider all applicable duties and taxes.
    The business flow: Quotation >> Sales order >> Delivery of goods >> Billing (VF01) >> Excise Invoice >> Account receivable.
    Note: To link the sales order with PS module you have to maintain respective u2018WBS Elementu2019 in the Account assignment tab of the sales order. This is used for planned revenue in PS.
    Since you are supplying goods from all plants, maintain all plants to Sales organization and distribution channel combination in Assignment of Enterprise structure.
    PS Module:
    If the customer orders for an entire project including supply of materials, installation and training the users, create a project definition for that project in the project system. Assign a main WBS element under the project definition. Assign lower level WBS element according to your need. Under the WBS element network is assigned. Under the network activities are assigned. Under the activity there are activity elements. There are different types of activities; internal, external etc.
    You can assign different WBS element for services. Under this the relevant activities are assigned.
    You can budget for the project; you can assign supplementary budget if it is required. 
    When you release the project the Purchase requisitions are generated. The MM persons will create PO and procure the materials for the project.
    All the materials required are initiated from PS. Here every activity is routed through PS including service.  So, all the expenses are captured.
    By settlement rule, the cost is arrived at different levels.
    The configuration is to be done accordingly.
    Hope this give you an idea on the subject.
    Regards,
    K Bharathi

  • Sales order creation with respect to contracts

    Hi Guys,
    I am trying to create a saleorders with referece to contract for which in the background I configured so that during my sales order creation I see the pop-up box with all existing contracts for a specified sold-to party.
    This process is so painful that order entry people have to manually select from the big list (pop up box consisting of huge list).
    Is there any way so that I can automate this process insetead of selecting contracts from that list.
    Regards
    Krishna

    Hi Ravi,
    Thanks for your solution and could you please give me some more details what is the neame of the user exit.
    and welcome for some more suggestions.
    Thanks
    Krishna
    One way is to create the order with reference to the Contract and then the system will not give the pop up for the existing contracts.
    The other way to automate the process is by using a userexit. Here the system should check all the existing valid contracts for this sold to party and should select the oldest or latest valid contract, as per the client choice.
    Thanks,
    Ravi

  • Sales Order creation/ change date for the items

    I have a unique scenario and i need to get a Report for this
    A sales order is created for 4 line items.
    Out of these , for 2 line items a delivery is created. I need the sales order creation date and time  for these 2 items in a custom report
    Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
    Also another scenario is the 2 line items go for back order and when we get stock  at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
    Can any one please suggest how to get this data  from the scenarios?
    I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

    You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes).  You can explore these two tables.
    thanks
    G. Lakshmipathi

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • User Exit during Sales Order Creation - New Line Item needed

    I have a situation during the process of sales order creation. If a Material in a line item has say 27 EA and the Base Unit is EA. But the Sales Unit is CSE. Then whenever the user enters 27 EA and presses enter he should get two line items.
    The first line item needs to convert to maximum number of CSE posible and the rest will be the second line item with the remaining EA. The order isn't important but that is what is needed. Question is how do I approach this problem and code my user exit accordingly and where do I code it.
    I was looking at SAPMV45A and saw the program MV45AIZZ which is meant as a user exit for any PAI event handling. If anybody has encountered this kind of requirement can you please share your view on this.
    I will definitely reward points for useful answers.
    Clark

    Hello Mahendra
    The requirement is as follows :
    PART 1:
    Sales Order Enter: 
    1.     When a line item is entered on a sales order (VA01 or VA02), at enter, check the sales unit of measure (VBAP-VRKME).
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check items where VRKME <> EA
    2.     If VRKME = EA, go to MARM for MATNR.
    3.     Go to record where alternate unit of measure (MEINH) = CSE, get the value from the numerator field (UMREZ).
    4.     Divide the order quantity (VBEP-WMENG) by UMREZ.
    5.     If the result is greater than 1.0, the customer has ordered more than one case and a new line item needs to be added to the sales order for the case quantity.
    6.     Add a new line to VBAP for the same material with the case quantity.  If not a whole value, the remainder of eaches (bottles) should update the qty on the first item on VBAP.
    •     Part 1 is relevant for order types ZCA, ZOR, ZSO, RE, ZSM
    PART 2:
    Batch Job to run prior to the Delivery Due List:
    1.     Read VBUK for Delivery Status (LFSTK) = A (delivery not processed).  Get all of the document numbers (VBELN).
    2.     Go to VBEP for those document numbers to get the goods issue date for the order.  There will be many records in VBEP for the same sales order.  Look at all orders with a goods issue date (WADAT) of next day.
    3.     Go to VBAK for those document numbers to see if there are multiple sales orders for the same Sold To party (KUNNR).
    4.     For customers who have more than one order in VBAK, search all line items (for all orders).  If there are no duplicate materials across sales orders, do nothing.
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check line items where reason for rejection (VBAP-ABGRU) is not blank
    5.     If there are duplicate materials, go through the same logic as in part 1.  If the quantity across the sales orders adds up to greater than one case, add the appropriate quantity to a new line item on the first sales order.   If there is a remainder qty, update the line item on the first sales order with this qty. In this case, the quantities on the second sales order needs to be closed out with a reason for rejection code of 50, ‘Line Item Consolidation’. If there is no remainder,  update the qty on this item directly.
    •     Part 2 is relevant for order types ZOR, ZCA, ZSM
    •     This batch job will have to be run manually for Day Pick orders.  The end of this program should automatically kick off the delivery due list for Day Pick orders, shipping condition 02.
    Business Justification:
    The business requires that like order line items be consolidated to one line item prior to the order going to the warehouse for picking.  This will aid in picking at the warehouse as well as result in the customer invoice not reflecting more than one line item for the same material.  In the case where the customer has truly ordered more than a case, i.e;, 1 case, 2 bottles, the documents in SAP will still reflect 2 lines.

Maybe you are looking for