Is one able to get Abode Color CC with CMYK colours? as opposed to just the hex code

This could save a little time. Is there also a similar pantone color harmonies as well. Cheers!

Hello,
I've got the same question about CMYK colors…

Similar Messages

Imac not booting, Able to get to disk ulility with snow leopard disk. Tap on had disk, not given choice to do anything. Information list that smart is certified and partition map is us formatted. How do I get mac to start up again?

Imac not starting up, keep getting white screen. Using snow leopard. Able to get to disk utilities with snow leopard installation disk. Tap on had disk, not given choice to certified disk or anything else. Information on disk states that smart status is certified. Partition map I formatted. Also tried to restore from back up, but get error: not enough disk space. Tried to erase disk, but unable. What do I do next to get mac to start up?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

HT4436 I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 8

I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?

This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

I am not able to sync my outlook contacts with my iphone (both ways) noting that the calendar and notes are suncing perfectly (both ways)?

I am not able to sync my outlook contacts with my iphone (both ways) noting that the calendar and notes are suncing perfectly (both ways)?

You cannot sync Outlook 2011 directly with an iPhone, but if you go to the Tools menu and choose Sync Services, you can have Outlook sync with iCal and Address Book, which will then sync with the iPhone. And if your business is using Microsoft Exchange, you can set the iPhone up to communicate and sync directly with the Exchange server.
Regards.

TS3694 Keep getting error 3004, every peice of information on this webstie about the error code is absolutly useless.

Keep getting error 3004, every peice of information on this webstie about the error code is absolutly useless.

Have you tried on another computer connected to a different network?

HT4623 I updated my iPad 2 to the new OS 7 and now I cannot get connected to the wi fi at my school site. I am getting a blue i with a circle around it next to the site in the choose a network. HELP :(

I updated my iPad2 to the new OS7 .....I am getting a blue i with a circle around it next to the networks in my district that I want to connect to. Does anyone know what that means?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Has anyone been able to get Forte on Linux with j2sdk1.4.0

I am noticing a trend in the posts from people asking questions about setting up Forte on Linux. (1) Setting the JDK_HOME doesn't seem to work too well; (2) replies tend to reference old URL's or the vague URL's provided by SUN; (3) if not (2) then no reply at all.
I was able to get Forte working with the JDK1.3.1, but setting JAVA_HOME with the sdk doesn't work with the same approach.
Any ideas?
Solution may be:
If replies = 0 then JBuilder;

I have my own solution. Jedit.

Proper color workflow with CMYK inkjet printer

Hi, I work in an academic science group that has a networked HP DesignJet 800ps printer (postscript RIP). Unlike many inkjets, it appears to be a true CMYK printer - that is, our i1 Match software recognizes it as a CMYK device. We do all our printing in house - we don't have to worry about commercial printing or publishing, and our color management needs are basically confined to trying to have the printer's output match what we see on our monitors when we print photos in Photoshop or posters in Illustrator.
Having previously worked only with RGB printers and in Photoshop, I am pretty much lost now as to how to set up our color management workflow. (And don't even ask about my colleagues. :-)) I've never had to worry about either CMYK workspaces or printers before. I want to keep things as simple as possible for the staff here, given that none, including myself, are graphics specialists.
I've looked at the "Color Workflows for Adobe Creative Suite 3" document published by Adobe, and although it is very meticulous, none of the examples seem to match our situation. Specifically, all the info regarding CMYK printing involves working with commercial presses, which is not relevant to us.
I would like to avoid making my colleagues work in different color spaces depending on whether they are working in Illustrator or Photoshop - ideally, I would like it if we could stay in RGB at all times. First question: Is this unrealistic given that we have a CMYK printer?
No doubt I will have more questions, but I want to start simple for now. Thanks for helping me out - this is not my area of expertise.

> profile them as RGB devices" (to quote the book). The printers that I've profiled in the past with i1 worked this way.
As Peter points out in his post, it is most likely that your RIP is a CMYK RIP (most RIP's are.) If that is the case, you'll be profiling a CMYK device, not an RGB device (as you have in the past.) It is a totally different exercise to profile a CMYK device - ink limits and Kgen are variables that must be dealt with.
> Yes, details would be very helpful. Thanks.
Color management is all about moving from one device/color space to another device/color space while maintaining color appearance as closely as possible.
1) Based on the description of your workflow, step one is to create your original art in a well-behaved RGB color space (like Adobe98) while viewing it on a well-calibrated monitor.
2) If your final output is to be on the HP 800ps, step two would be to preview that art on your monitor as it would look on the HP. This is called soft-proofing - a process by which the art is viewed through the HP profile on-screeen so you can see what happens to all those beautiful, rich RGB colors when they're squeezed into the smaller gamut of the HP profile.
To do this, you go to View > Proof Set-Up > Custom, and choose the HP 800ps profile from the pop-up of all the profiles on your system. You can also choose from among 4 rendering intents - Relative Colorimetric, Perceptual, Absolute Colorimetric, and Saturation. Choosing the correct rendering intent is key - this willl determine how Photoshop deals with the out-of-gamut colors. Without getting into an explanation of what each RI does, the important thing is to choose the one that LOOKS the best on screen. There's no magic to it. In general, for photographic images, you'll be choosing from Relative or Perceptual. For vector graphics (which it sounds like you're doing), throw Saturation into the mix as well. Just try them and see which looks best.
Additionally, be sure to check "Black Point Compensation."
This will give you a good idea of what the final printed version will look like. While you're in soft-proof mode, you can edit the RGB file to alter the way out-of-gamut colors appear. In fact, there's no reason why you couldn't create your art from the beginning while in soft-proof mode. Using a well-built profile and a good calibrated monitor, you should be able to get an extremely close match between monitor and print.
3) When you print, be sure to choose the same profile/rendering intent that you used in Proof Setup.
Again, it all starts with a good profile. Good luck.

When I try to add an RSS or Atom feed, I get a dialog box with Open or Save instead of adding the feed to NewsFox like it used to do.

With Firefox 4.x, when I added a feed, it would open NewsFox in a new tab, and bring up a dialog box with info about that feed. I would click on "test this feed" and it would put all available items into NewsFox. Now, I get this dialog box with Open or Save. If I click on Open (declaring Firefox as the preferred app), then it opens the feed itself, it doesn't add it to NewsFox. I've tried going into Options and about:config but don't see anything to change that would fix this problem. I tried Search in Firefox Help but no relevant threads came up.

Thanks Cor-El. I already have it set to "Use NewsFox." I'm stumped.

If i get 2 smart phones with a contract and decide to end the contract in a year how much would it cost to get out of the contract?

.

@sosalamron,
A new phone is definitely an exciting time! I'm sure that once you get you new smartphone with VZW you will not want to leave.
However, if you were to cancel after a year you would be billed a cancellation. The cancellation fee is $350.00 for each smartphone, but is lower $10.00 every month you complete of your agreement. So if you have the service for 12 months, that will lower the cancellation fee by $120.00 bring it down to $230.00.
JohnB_VZW
Follow us on Twitter @VZWSupport

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I was not able to get to a website with Firefox but I could access it with Explorer so I deleted past history and cleard my cash, now websites I am creating are changed and my passwords are gone so I cannot get into the admin area

I have a website, whitening-skincare.com and am creating a website, lew-deals.com. Suddenly, yesterday, Firefox would not let me into lew-deals.com but directed me to "Default Website Page" but I could open it on another browser. I ran ipconfig/flushdns on my computer, re-booted my computer and the problem still was there, so I went to 'Show all bookmarks' and deleted History for a couple of weeks to that site, then I cleared my cache.
I then went to the whitening-skincare site and it had reverted to where it was when I first started working on it. I tried to get into the wp-admin to see what was going on but was not recognized. I now think that I need to have all the history and cache restored but have no idea how to do it unless a system restore will do it; which I will try in a while if I get no response from you.

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

My Ipad was activated by my cousin so then when i have restarted it, i had to use their apple email to activate my ipad and she lives very far so is their any other way for me to be able to get into my ipad with my apple ID

My ipad was activated by my cousin so then i cant activate it by my apple ID so can i get into my ipad without using my cousins icloud? i know my apple ID and Apple password/

You need to erase the device and reconfigure it for yourself. Have your cousin turn off Find My Phone, then erase your iPad. After iOS is reinstalled do your own setup using your Apple ID and password.

Is one able to get Abode Color CC with CMYK colours? as opposed to just the hex code

Similar Messages

Maybe you are looking for