Is Operation Undo/Reversal possible in SAP ME?

Hello Experts!
I have reported/completed an operation for an SFC in a POD and its status changed to In-Queue for next operation. I was wondering if there is any way to undo the reporting on the previous operation so that we can redo it at a later time?
And, would this undo also send a reversal of confirmation to ERP?
Thanks,
Venkat

Venkat,
Just to point out that unless the operation that was accidentally completed was the last operation then nothing would move to inventory as the product would still be WIP.
If it was the last operation ME would mark the SFC as DONE and the appropriate goods movements would be carried out in ECC to move the part into inventory / stock. For this scenario I would push the part back into ME using a rework order as this would move the part back out of stock and back to WIP.
Assuming the SFC wasn't at the last operation then have a look at "SFC Step Status" which allows you to move a product to any operation on the current router but be careful as you can cause lots of trouble with this command.
From a business process perspective I would suggest the best solution would be raise a non conformance with a disposition that allows you to go back to a previous operation as you should be tracking how often users transact operations incorrectly and tackle the root cause.
Hope this helps
Kevin

Similar Messages

Invoice reversal: u201CNo reversal possible. Reverse value must be resetu201D

Hi everyone. I am a junior consultant and would like to know if you can help me.
I need to reverse an invoice SAP retrieves the message u201CNo reversal possible. Reverse value must be resetu201D.
DIAGNOSIS: u201Cu2026the quantity is the same as the total quantity invoiced, but the value is not the same..u201D
In the Amount column of PO I noticed the following difference:
Goods receipt document has the value 6.112,2835;
Invoice receipt has the value 6.112,2843.
Both have the same quantity.
As I need to reverse the invoice how can I deal with it?
Regards

Alex, quantities are the same (goods receipt an invoice receipt) the only difference in amounts in foreign currency (goods receip=>6.112,2835 and invoice recept=> 6.112,2843)
In local currency there are no differences.
Edited by: Naej on Nov 10, 2010 5:52 PM

Is conditional prompt possible with SAP BO AO Excel?

Hi folks,
Is conditional prompt possible i.e the "prompt" should appear only when the measure is used in the report?
Is this kind of feature possible with SAP BO AO on HANA?
Regards,
Krishna Tangudu

Could you clarify?
Do you mean conditional formatting?
If against HANA, I am not sure as the SAP help doesn't specifically mention it:
http://help.sap.com/businessobject/product_guides/AMS14/en/14SP7_aaoffice_user_en.pdf
See page 141 - Source: SAP help
SAP HANA data sources
With SAP HANA data sources, you can use the following Analysis functions to analyze your data:
● Inserting a crosstab with SAP HANA data
You can also insert more than one data source in a workbook.
● Saving/Opening a workbook to/from the business intelligence platform server
● Undo/Redo
● Defining style sets for crosstabs
● Swapping axes
● Analyzing data with the design panel
● Filtering members
● Sorting data by members and by measures
● Inserting charts
● Inserting filter components
● Converting crosstab cells to formula
● Creating Presentations
● Pause Refresh

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

Is 2D Barcode possible in SAP SCRIPTS

Hi folks ,
Is 2D barcode possible in Sap scripts?
Thnaks
pabi

What Barcode are you thinking of?
SAP supports a list of 2D Barcodes see in OSS
Pls. also think about how to bring this Barcode to paper?
This is an interessting theme!
Start considering an external Output Program like LaserSoft from DETEC, Streamserve, DCS2000 from invaris or DocumentDesigner from OCE.

Is service sale possible in SAP SD

Dear all,
I want to know if service sale is possible in SAP SD
Regards,
Gaurav

Hi Gaurav,
Yes service sale is possible in SAP SD.
I have worked in one project that is Gas related work project which is a service project.
For this we have to create a material of type DIEN(Service material) while creating the material using MM01.
As it is service project there will be no delivery.
And the billing will only order related billing only.
Except this change every thing will be similar to our standard procedure.
Pls let me know if there are any other issues.
Reagdrs,
Krishna.

Is multiple inheritence is possible in sap?

can any one help me?
is multiple inheritence possible in sap ?
and is one class can extend multiplre interfaces??

Hi,
Multiple inheritance as a concept is not allowed in ABAP Objects. But the effect and behaviour that you get by multiple inheritance is acheviable in ABAP objects with the help of interfaces. As follows.
An interface can inlcude more than one interface, that is an interface can extend more than one interface. Now if you have say interface1, interface2 and interface3.
interface4 can be declared to include all three other interfaces. And you class can include this interface4 in its interfaces tab.
Due to this your class gets the behviour(methods) that is defined in all ther interfaces. You can assign an object of this class to a reference of any one of these four interfaces. So one object can react to method calls on four different interfaces which is what you want to achevie in multiple inheritance.
Regards,
Sesh

IFRIC 1 in IFRS ---- Is it possible in SAP to discount a liability figure

Hi All,
As per IFRIC 1 in IFRS: To measure decommissioning provision, the periodic unwinding of discounting shall be recognised in income statement as finance cost as it occurs.
Is it possible in SAP to discount a liability figure and charge to interest the annual addition for unwinding of discount?

No, sorry, I mean I copied the data vector (model.getDataVector()) to an other vector, not the model. And the problem is that the serialized data did not reflect the changes if I just change vecor values, so this is why I reinstantiated the full model. I think this is rather a java io issue, not a swing issue, it seems any object I serialize will not be refreshed if I just change some attributes in it and not the full variable. Can this be true?
On the othe hand
table.setAutoCreateColumnsFromModel( false );
quite simplified my framework, which is great!
The old framework looked like this:
public BaseTblModel resetModel() {
removeListeners(tm);
removeListeners(tb);
tm = new TrackTblModel();
tb.setModel(tm)
reinstallEditors(tb)
addListeners(tm);
addListeners(tb);
return tm;
Now with table.setAutoCreateColumnsFromModel( false ); it looks like as simple as:
public BaseTblModel resetModel() {
tm = new TrackTblModel();
tb.setModel(tm)
return tm;
So it would be better If I could leave out this step as well, because I do it just because of the mentioned serialization problems.

Is it possible in SAP?

SAP GURUS, is it possible to SAP to pay and print checks without using any vendor accounts. Exmaple of this is to transfer a check from checking account in bank to petty cash .. PLease help,

I enter the following entries: via account assignment model FKMT . the following entries are:
DEbit Salaries Expense   100,000
         Medicare Contribution Expense 20000
Credit Withholding tax payable   10000
          Medicare Payable           20000
          Salaries Payable            70000
Next i want it to pay and create a payment document. I tried F-53 but when i enter the GL account, no pen itmes list in that GL... Please help
Edited by: Roy Jensen Carasco on Jan 13, 2009 7:25 AM
Edited by: Roy Jensen Carasco on Jan 13, 2009 7:27 AM

Is it possible in SAP B1 only.

Hi,
I want to find out the ITEM WISE - its Last Purchase Price . Is it possible in SAP B1 only.
Item Details according to item wise -its Last Purchase Price
Plz reply..............................!

Hi Jyotsana......
You can get this report through query generator........
You may try this.......
SELECT Top 5 T0.[DocNum], T1.[ItemCode], T1.[Dscription], T1.[Price], T3.[ItmsGrpCod],
T3.[ItmsGrpNam] FROM OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON
T2.ItmsGrpCod = T3.ItmsGrpCod WHERE T3.[ItmsGrpNam] ='[%0]' ORDER BY T0.[DocDate] desc
Regards,
Rahul

Is it possible in SAP that I can restrict a specific delivery with shipment

Hi All,
Is it possible in SAP that I can restrict a specific delivery can be attached with specific shipment?
Example,
I have a delivery type "A", which can only be attached with Shipment type "Z".
Thanks in advance.

I don't think it is possible, However you can restrict that through selection criteria of VT04.

Is it possible in SAP that I can restrict a specific delivery can be attach

Hi All,
Is it possible in SAP that I can restrict a specific delivery can only be attached with specific shipment?
Example,
I have a delivery type "A", which can only be attached with Shipment type "Z".
Thanks in advance.

NO.
You can only specify a selection variant to select certain type of deliveries.

How to cancel automatically messages stated 17 (Application error - manual restart possible) in SAP ECC

Hi people. I need to create a job to cancel automatically the messages with the status 17 (Application error - manual restart possible) in SAP ECC.
In SXI_MONITOR I can retrieve these messages filtering just for "Application Error". I can cancel them here, however I need for a Job to do it.
I appreciate your help.
Regards
Arturo Santos

Hi,
>Is there any way we can make this automatic
In RWB-Component Montoring-Adapter Engine-Communication Channel Montoring- Select the Adapter- Go to Settings and change as per your Business Requirement.
Regards
Agasthuri Doss

Only VAT correction. How possible in SAP?

Hi,
We would like to correct only the VAT amount.
Is this possible in SAP? Please give an example with transaction code.
Best Regards,
Eric van Zundert.

Hi
Use TCode F-02 and post the document with same amount of Debit and Credit (Posting Key 40 and 50). Before that check the relavant GL Accounts are allowed for post manually at TCode FS00
Cheers
Srinivas

Up to what level abap devlopment is possible in SAP

hi
up to what level abap devlopment is possible in SAP.
thanks.

Laxman,
May I know the context of your query.Why do you think beyond a particular point it will not be possible.
K.Kiran.

Is Operation Undo/Reversal possible in SAP ME?

Similar Messages

Maybe you are looking for