Is Oracle 8 EE available for REdhat Linux 6.0

Would anyone know whether Oracle 8 EE available
for REdhat Linux 6.0 ? Also, what is the fundamental
difference between the standard edition, Oracle 8 and Oracle 8i
for Linux (briefly).
Thanks
Eashwer
null

Eashwer Iyer (guest) wrote:
: Would anyone know whether Oracle 8 EE available
: for REdhat Linux 6.0 ? Also, what is the fundamental
: difference between the standard edition, Oracle 8 and Oracle 8i
: for Linux (briefly).
: Thanks
: Eashwer
Oracle 8i for Linux 2.2 kernels (using glibc 2.1) is supposed to
be out the first part of June. I don't know what they will do
about 8SE and 8EE. Maybe supply patches? Anyway, Oracle is
aware of the problems associated with glibc 2.1 and is working on
it.
I installed Caldera Openlinux 2.2 and used a previously installed
Oracle 8EE installation. So far, it is working. I believe they
have said that it should work, but you may encounter a few
errors.
I believe that Oracle 8EE adds Partitioning and Objects. 8i is
made for use with the internet and allows you to create stored
procedures in Java. I have never used the product, but that is
my understanding of it.
I hope this helps.
null

Similar Messages

Oracle firewire modules for Redhat Linux 2.6.9-34.EL

Hi,
I need oracle firewire modules for Redhat Linux 2.6.9-34.EL. Can you please help where can I find firewire modules for this kernel.
Thanks
Haranath

According to http://www.linux1394.org/download.php you should not need any additional kernel module support. You may need to install the libraw1394 RPM packages, but you can get those from your distribution media or from ULN, if your are subscribed.

Oracle not available on redhat linux 7.0

Hello frineds ,
I successfully install oracle 9iAPS on RedHat Linux 7.0 , My purpose to run oracle 8.1.7
and it was done successfully , But getting a problem while creating database
1. :- dbassist and copy database from cdrom but at the end approximately 80 % to 82%
it give me error oracle not available or end-of-file on communication channel
2:- SVRMGRL while connection as internal/oracle and tried to create database it give me error like
ORACLE NOT AVAILABLE

Hi
At windows You must create a service to hadle oracle threads. On linux this is not working in same way, You do not need a "service" to bind thread or process to it.
simple set environment variables
and start sqlpus session with create database command, and so on.
Maybe You should read oracle admin guide for linux.

Where to download Oracle 9i client for Redhat Linux?

We have our Oracle 9i database running on another UNIX machine and need to install Oracle 9i client with sqlplus to be installed on Redhat Linux. So, can someone tell me where I can download it?

Hi,
Please refer to:
http://www.oracle.com/technology/software/products/oracle9i/index.html
Best regards,
Sipingal

Is there any Oracle client for RedHat Linux

Hi,
I m searching for the Oracle9i client for RedHat linux. Is it available free. If yes please tell the site name.
thanx
-biyat

Which oracle version u have for Solaris intel
[email protected]
Hi,
We have an oracle server (8i) running on Windows NT. I need a oracle client on Solaris Intel 8 to connect to the Oracle server running on NT.
Thanks
--John

Problem installing Oracle 8.05 on Redhat Linux 7.1

I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]---------------------------------------------
Action: Installing install.
Command: (make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install), Out=/opt/oracle/home/orainst/make.log, Err=/opt/oracle/home/orainst/make.log
chmod 755 /opt/oracle/home/bin
rm -f oracle exp imp sqlldr tkprof mig dbv tstshm maxmem orapwd dbfsize cursize rman genoci svrmgrl extproc ihsalloci ihsots ihsdepxa ogms ogmsctl osh sbttest /opt/oracle/home/rdbms/lib/ksms.s /opt/oracle/home/rdbms/lib/ksms.o
echo " - Linking Oracle " ;\
/opt/oracle/home/bin/echodo cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o \
-lserver -lclient -lvsn -lcommon -lgeneric \
/opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt \
-lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt \
-lslax -lplsf -lplsb -lextp -ldbicx \
/opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o `cat /opt/oracle/home/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql `cat /opt/oracle/home/rdbms/lib/nmliblist` `if ar tv /opt/oracle/home/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lmdknl -lmdhh"; fi` \
-lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql ;
- Linking Oracle
cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o -lserver -lclient -lvsn -lcommon -lgeneric /opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt -lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt -lslax -lplsf -lplsb -lextp -ldbicx /opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql /opt/oracle/home/rdbms/lib/skgxns.o -lmdknl -lmdhh -lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql
/opt/ora cle/home/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/opt/oracle/home/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [opt/oracle/home/rdbms/lib/oracle] Error 1
Status: 2
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install ))
--------------[ rdbms.ins 2631 ]---------------------------------------------
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nicholas Waltham ([email protected]):
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]<HR></BLOCKQUOTE>
Well ,I tried to install Oracle 8.0.5 in Debian Potato. At end I desist.
Oracle 8.0.5 works with glibc 5 and Debian Potato with glibc6 .
I guess this is your problem.
There are patches for this but i don't get
to make work.
Sorry for my english.
Cisar

Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0

Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir Buturovic

Providing a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.

Help! to set up Oracle 9i RAC on Redhat Linux 8.0

hello,
we are setting up Oracle 9i RAC on Redhat Linux 8.0.
The problem we are having is at the point of sharing the raw partition and mounting the raw partition via nfs.
so we have two dell systems called linuxa and linuxb.
the partitions are made on linuxa (/dev/hda6...) and the raw command is used to bind the raw partition to the device (raw /dev/raw/raw1 /dev/hda6)
now when i run the command to mount
(mount -tnfs linuxa:/dev/raw/raw1 /mnt) i am getting an error
i know this problem isn't directly related with oracle but the whole point in doing this is to install oracle 9i on a shared device between the two system.
i have looked online everywhere for documentation and haven't come up with anything.
Any help will be greatly appreciated!
sara

I don't know that you can use nfs to share a raw partition. This also defeats the idea of the cluster - If a host dies, the disk storage must still be viewable from the other node.
The raw device must be viewable to both hosts. Oracle controls which host is writing to the disk at any instant.
Use the firewire method or use two scsi cards (terminated, with different scsi id's) to a SHARED scsi disk (unterminated).
This works, I have it running here on 2 PC's with Redhat 7.3. The SCSI disk sits in its own external box between the two PC's. NFS is not used at any stage.

Configure BPMJ2EE 10.3.1 for Redhat Linux

install BPM J2EE 10.3.1 for Redhat Linux and weblogic server 10.3 for linux in Redhat Enterprise Linux 5.
The oracle DB is installed in Windows 2003 server sp1 of another machine.
When I configure the BPM, it is failed at about 70%.
Mush I install weblogic server and BPM and config the BPM as root?

Hi YE,
If you are deploying BPM on a Weblogic Server you'll find your workspace on the following url
http://localhost:7001/workspace
This is because the all the jar services are deployed to the WLS. You can monitor if it is installed by going into the Process administrator -> Engines -> J2EE jar deployment (or something)
There you'll find all the jars that are/can be deployed. If you make any changes using the BPM admin center configuration don't forget to recreate and redeploy the jar file.
Hope this helps.
Kind regards
Nils

Oracle MIBs available for compiling?

Are the Oracle MIBs available somewhere so I can download
and compile them into my management system? I'm able to
see a chart of many of them in the SNMP Support Reference
Guide, but that doesn't help my NMS when it performs a walk
and we want to easy understand the output.
Thanks!
Scott

orashiju wrote:
What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
ShijuIs there any specific reason to open a new thread for the same discussion that you have started here,
Please suggest a suitable method
Aman....

Unified Test Development Framework (Oracle Testware) available for 11gR1?

Hi,
found this article: http://blogs.oracle.com/testware/2009/07/introduction.html
Is Oracle Testware available for 11gR1?
I posted the question at the blog too but didn't get an answere.
regards
Peter

Hello,
ODSM has the following dependencies apart from ADF (both components depend also on ADF):
- UIShell (oracle.idm.uishell.war)
- Webcenter Composer (oracle.webcenter.composer.war).
Apparently the composer is missing.
Important points to check when using ODSM with WAS:
- To install and configure Oracle Fusion Middleware with IBM WebSphere, you must first install (but not configure) IBM WebSphere
- You must install the Oracle Application Development Framework as the same user who installed Oracle Unified Directory.
- appdev must be installed under the same ORACLE_HOME as OUD
Sylvain
Please mark this response as correct or helpful when appropriate to make it easier for others to find it

Is Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

s Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

As per the support matrix Oracle 12 will be supported with 11.1.2.3.500. Check the support matrix at : Supported Platforms Matrices - Oracle Enterprise Performance Management System
Thanks,
KK

Oracle features available for this scenario

What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
Shiju

orashiju wrote:
What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
ShijuIs there any specific reason to open a new thread for the same discussion that you have started here,
Please suggest a suitable method
Aman....

Oracle 9i for Redhat Linux 9

Hi
I have a P-III, 1Ghz 128MB RAM, 40GB HDD pc. There are two OS installed in it,i.e., Win200(prof)and Redhat Linux 9.
As I am undergoing a course in Oracle 9i DBA, I have installed a copy of Oracle 9i Enterprise Edition in my Windows partition and am practising on it. I want to install Oracle 9i in the Linux partition also, but I do not know which one to install. There are so many variants of Linux available for downloading.
As I am pretty new to the field of Linux and Oracle, I am very much confused.
If anybody could help me in figuring out the correct download for my file, it would be very great.
Thanks
Shoeb.

No. You have to follow the minimum requirements, which I think is 512MB of RAM.

Oracle 8i Installation on Redhat Linux AS 3.0

Hi guys,
I am just doing some home work before installation of Oracle 8i Enterprise server on Redhat Linux AS 3.0. Before I started my work on this, I planned to install 8i on AIX 5L, which was a bad idea. Because 8i being a 32bit db and 5L being 64bit kernel, and also this combination is not supported. But with little tweeking and installing few patches, things should work.
Anyway, I would like to know, if any of you have installed 8i on RH Linux AS 3.0, and do any of you think I need to worry about 32 & 64 bit? I am installing this combination on Compaq PL 6500 server, will there be any problem, because PL 6500 is 32 bit processor? Please pass on any information which can help me in a proper installtion, Thanks in Advance

Joel,
I am new to this company. This is my first year here, from last one and half year my company was trying to migrate from Informix to Oracle. After I joined I came to know that my predecessor started the project on 8i and left the project half way thru. Then I took over the project and completed the migration from Informix to Oracle. My company spent awful lot of money on this project due to lack technical know how and mislead by the technology staff who has no knowledge of oracle or UNIX (they are bunch of old NCR and Cobol guys here). So bottom line is if I submit a proposal to my boss of upgrading from 8i to 9i or 10g, which I will, probably won't be happy to see. But on the other hand we will loose support and left with no choice, I can only say that I am sorry for them.
Anyway, this is just a part of disorganized IT shop we have here, it needs a major facelift, and I am just pushing one at a time. Thanks for your reply, I really appreciate.

Is Oracle 8 EE available for REdhat Linux 6.0

Similar Messages

Maybe you are looking for