Is Oracle Cluster DVD 11gR1 AIX5L works for AIX6L

Hi Guys,
I order CDs from Oracle support for AIX 6.1 (64-bit) which I received Oracle CDs for Cluster and database for 5L . Also download page show only two files without mention 5L or 6L.
Is 5L works for 6L ? I ask Oracle support but it will take some time . Your feedback please.
Thanks ..

It seems will work but only Oracle can provide definite answers.
Also download page show only two files without mention 5L or 6L.As you said, you do not see any changes then you must try the software.

Similar Messages

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

Stuck trying to remove Cluster/RAC 11Gr1 in prep for 11Gr2 install...

Hello all,
I'm thinking I'm missing something simple here...but I can't figure it out yet.
Ok, I have a 3 node RAC cluster, Oracle 11Gr1...I want to remove all instance, and clustering (ASM is ok to keep)...before I try to put on 11Gr2.
This is on RHEL5.
I had previously used srvctl to remove the databases, nodeapps, asm...etc., in anticipation of removal of everything.
I found the de-install directions for 11Gr1 at Oracle's site...and found they said for this release, to use DBCA to remove the RAC instances, and then the clusterware.
This is where i"m stuck. I opened up DBCA, and for the RAC stuff...the option to delete databases was greyed out unselectable.
I thought this odd. I went to look at the instructions...and while in the Preamble of what was going to happen with the de-install, it mentioned shutting down database instances, etc....it did NOT in fact, say to do this prior to firing up DBCA.
So, I went back with srvctl, I added nodeapps (clustering was still running). I added back the ASM..I could do lsnrctl status, and I saw it up, and saw ASM there.
I next tried adding my databases back...which seemed to go without error. However, I did a database start..and no error, but when doing a ps-ef | grep pmon, I see nothing running on any node??
I tried to do a config on the database instances...no error messages returned...but again, doing the srvctl start did nothing.
I thought, well, lets see if DBCA can work from here.
This time, it DID see the RAC instances...but said they were "inactive". It would not let me past this screen (even after adding sys user and password)...to delete the databases.
I've never used srvctl to start from scratch to add asm, listeners, nodeapps and database instance...only to delete them, so I'm guessing I'm missing a step here.
I saw there was an add service option, but I'm not sure what the service is or how to use this command. I tried to add a service with best guess something like
./srvctl add service -d INSTANCE -s INSTANCE-u -a "INSTANCE1 INSTANCE2 INSTANCE3"
But it threw an error saying :
PRKP-1085 : Service name cannot be same as the database default service name "INSTANCE"
So, am I missing the service part of getting these database instances up and running? If so, can someone give me some suggestions on what I'm missing doing here.
As a second part to this...can I remove all the instance stuff without DBCA? If I go back, and remove everything with srvctl......
Then go to DBCA to remove the clustering software (I should still be able to do that)
Can I then go, and just hit each node, remove each $ORACLE_HOME...to get rid of all binaries, etc?
I wanna make sure I clean off everything 11Gr1 (except the ASM libs)...before I try to put 11Gr2 on these nodes..as that I know they are pretty different, and I don't want any old stuff there messing with the new install.
Thank you in advance,
cayenne

Hi,
did you also add back the instances? srvctl add instance?
Sebastian

Oracle Cluster - How does it work?

Can anyone tell me how exactly it works. It says "A cluster table uses the space allocation of the cluster."
But what does it mean for me? Example: I create a cluster "clu1" with a varchar column. Then I create two different tables "table1" and "table2" with a column based on that cluster column.
Do the tables share the same values? What exactly do they share? Space? Does it have direct influence on my data?

Maybe this thread sheds some light on your questions:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:4536286321836
C.

Oracle Workflow Delegate is not Working for the Adhoc Role

Hi All,
I have a requirement where I want to send the workflow notification to the Adhoc role and then if the people who are part of the adhoc role are on vacation then the notification should get delegate to the person set by the first approver. Somehow delegate is not working here.
Please let us know if anyone of you have worked on such requirement or have come across this situation.
Thanks in Advance,
Viswas
Edited by: 873477 on Feb 6, 2012 12:30 AM

Thanks for the replying on the issue.
This issue has been resolved now.
In WF_NOTIFICATION.route procedure, Following query was selecting the Adhoc role name instead of the fnd_user, We have changed our custom in such way that there should always be fnd_user for the follwoing query.
         SELECT   WN.RECIPIENT_ROLE, WN.MESSAGE_TYPE, WN.MESSAGE_NAME
           INTO   recip, msgtype, msgname
           FROM   WF_NOTIFICATIONS WN
          WHERE   WN.NOTIFICATION_ID = nid;Thanks,
Arun
Edited by: 873477 on Feb 6, 2012 11:26 PM
Edited by: 873477 on Feb 6, 2012 11:27 PM

Trying to erase hard drive on MacBook before resale, but dvd player not working for install disk. Is there a work-around?

I have a new iMac running 10.6 if that helps.

If your MacBook and your iMac have firewire ports you can install by Target Disk Mode. You'll need a retail version of a Mac OS to do this if you don't have your MacBook's gray install disks.
Start up your iMac with your install disk. After you get to the install screen on your iMac connect your MacBook to your iMac in "Target Mode" with a firewire cable http://support.apple.com/kb/HT1661
Then open "Disk Utility" from the "Utilities Menu" on the Menu Bar from the install disk on your iMac. You should see both your MacBook and your iMac hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen.

Installed Windows 8.1 on my HP Pavillion g7 & DVD player wont work

Hi All , I Installed Windows 8.1 on my HP Pavillion g7 and now my DVD player wont work for some reason, Any thoughts? I tried troubleshooting and it detects that there is a problem with the driverfor USB-IF xHCI USB Host Controller.
Thx,
Gslice
This question was solved.
View Solution.

Hi:
I would try each of resolution steps 2, 3, 4, and 5 at the link below.
One of them may work.
http://support.microsoft.com/kb/314060

IMovie less than an hour. share to iDVD failed. read to share to media browser. worked for one movie. tried on different one and iDVD hung up and had to use force quit to get out of it. tried several times -- same result. suggestions?

iMovie less than an hour in length. share to iDVD failed. read in support to share to media browser. then made DVD through iDVD. worked for one movie. tried on different one and iDVD hung up and had to use force quit to get out of it. tried several times -- same result. suggestions?

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Oracle cluster cleanup

Hi,
I am in the process of deleting the RAC setup on Linux, to do a re-installation. Is there any script to cleanup the installed oracle cluster software
thx.
Message was edited by:
user551201

Assuming this is linux and using raw file systems with ASM ....
Cleaning up a Cluster - each node
1.     Disable CRS.
•     Stopping the Oracle Cluster Software on each Node
For 10g 10.1.0.04 or later:
# /etc/init.d/init.crs stop
For 10g 10.2.0.01 or later:
# <CRS HOME>/bin/crsctl stop crs
Wait until Oracle Cluster Software completely stops. (Check CRS logs or check for Oracle processes, ps -ef | grep ocssd.bin)
•     Change Oracle Cluster Software from Starting at Boot Time on each Node
For 10g 10.1.0.04 or later:
# /sbin/init.d/init.crs disable
For 10g 10.2.0.01 or later:
# <CRS HOME>/bin/crsctl disable crs
2. Delete the last 3 lines in /etc/inittab
3.     Delete all files in /etc that begin with ora*
a.     rm –r –f /etc/ora*
4.     delete all files that begin with init.* in the /etc/init.d directory(MAKE SURE IN THE DIR)
a.     rm –r –f /etc/init.d/init.*
5.     delete all files that are outside of the /opt/oracle/product/10.2.0 directory structure
a.     rm –r –f /opt/oracle/product/10.2.0/*
b.     rm –r –f /opt/ORCLfmap
c.     rm –r –f /opt/oracle/product/admin
d.     rm –r –f /opt/oracle/product/oraInventory
6.     erase all files in the /tmp directory that are oracle installation related
7.     Clear out the shared storage by using the dd command
a.     dd if=/dev/zero of=/dev/emcpowera1 bs=8196 count=1000

Show the company I work for that we should have one cluster

The company I work for have several projects where we are going to use RAC. The issue I'm having is they want each database to be in its own cluster hardware. I'm trying to show then that we should cluster all the hardware together and make small RAC database in the one cluster.
Does any know of anyone that has written a go doc how why you should have one cluster versus multiple clusters.
Example of what they are thinking of doing note this is all separate hardware cluster1 will not be cluster with cluster2 I'm try to show them if we cluster it all together we get more power and may not need so much hardware:
Project 1
cluster1_dev
2 nodes
cluster2_qa
4 nodes
cluster3_prd
4 nodes
Project 2
cluster2_dev
2 nodes
cluster2_qa
4 nodes
cluster2_prd
4 nodes
What I’m proposing is the following setup:
Cluster_dev
3 nodes
Project1 instance cluster on all 3 nodes
Project2 instance cluster on all 3 nodes
Cluster_qa
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes
Cluster_prd
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes

I am always impressed by choosing rac without having expressed what types of failures to be covered.
maybe you really don't need rac ...
moreover, rac is imho really not 2 nodes oriented but well grid oriented.
a lot of small server in the same cluster is for me the way to go or the the way to think.
Services features were introduced to allow one rac db to be shared by multiple applications.

Can't get audio to work for HD DVD

Anyone have any insight into what audio enoding works for HD DVD? I've tried both aiff and ac-3 to go along with MPEG2 video and my Toshiba HD A2 won't play back sound from either type. Help!

I have used both on the Toshiba A2. I assume the build file had sound when you tested it in the Apple DVD Player?
I have not played with the audio settings much on the Toshiba, do not know if there is a setting there that can change things.
I can take a look and run some tests to see if I can get it happening. Also if you like I can put together a small project to see if you can also get it to run.

Declarative transaction not working for oracle 10g as.

Hi Friends,
While migrating from sun app server to oracle 10g as, i have problem in declarative transactions.
I created stateless and stateful beans with declarative transactions. Transactions were working fine till they were in sun app server environment, but they fail in oracle 10g as environment.
I build the ear through sun IDE and deployed the ear on oracle 10g as. Things worked fine till transactions come onto picture.Declarative transaction get failed in case of oracle 10g as.
Please if you have faced such problem or have any way to solve this problem, Pls revert back.
rgds,
m_khanduri

sb92075 thank you for reply. Please see the command outputs.
$ hostname
LONDAN
$ id
uid=503(oaprod) gid=5002(dba) groups=5002(dba)
$ uname -a
Linux LONDAN 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
$ ps -ef | grep -i pmon | grep -v grep
oaprod    3810     1 0 May11 ?        00:02:24 ora_pmon_OID
jgarry thank u also. please see the response.
$ ls -rl $ORACLE_HOME/dbs
total 2848
-rw-rw---- 1 oaprod dba    3584 May 8 14:33 spfileOID.ora
-rw-r----- 1 oaprod dba 2867200 Sep 10 10:17 snapcf_OID.f
-rwSr----- 1 oaprod dba    1536 May 5 06:17 orapwOID
-rw-rw---- 1 oaprod dba      24 May 11 17:24 lkOID
-rw------- 1 oaprod dba    8385 May 5 05:18 init.ora
-rw------- 1 oaprod dba   12920 May 5 05:18 initdw.ora
-rw-rw---- 1 oaprod dba    1544 May 11 17:24 hc_OID.dat
ok. previously I set TNS_ADMIN. Now I set TWO_TASK, while connecting now am getting different error "insufficient privilege". Please check following.
$ export TWO_TASK=OID
$sqlplus / as sysdba
SQL*Plus: Release 10.1.0.5.0 - Production on Wed Sep 11 05:22:28 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
But, now while connecting with "sys", I don't need to supply "@OID" it's connecting directly with "sqlplus sys as sysdba" command.

DVD "Play All" Button Only Works for Two Clips

I have Castle Season 1 on my computer and thought it would be nice to create a DVD of all of them. I have a "Play All" button and an "Episodes" Button. Both seem to be registered as a button (Havn't linked the "Episodes" button yet)... I'm hoping to get the "Play All" button to do just that, play all of the episodes in a row, and to do that I have them linked by end action in a row with the last one going to the 'Last Menu'. It works for the first two episodes and then when I click the next chapter button (In the built in DVD 'emulator') after the second episode it goes back to the menu. To see if there was a difference in settings I switch between the first and second episodes to detect any setting changes, and there were none (Except the end action was set to different episodes). I am at a loss on what is wrong.
If screenshots or settings need to be posted just let me know, and I would be happy to post them.
Thanks Ahead
Windows 7 Home Premium 64 Bit
Adobe Master Suite CS5
AMD Phenom II B45 (Unlocked Athlon II x3 445)-Not the best CPU, but i'm on a tight budget
4GB G. Skill 1600 DDR3 RAM
GTX 460 OC'd
60GB SSD Boot Drive
1TB HDD (1x250GB, 1x750GB)

Glad that Playlist worked for you.
1.) The buttons don't animate when selected. On a DVD player, there would be no way to tell the difference on what I had selected, is there any way to remedy that?
In the Menu Editing Panel>Properties>Motion area, you can check Animate Buttons. This will show the Thumbnails as animations.
For telling the user which Button has been navigated to, one uses Sub-picture Highlights, which are only 2-bit color. Are you using a Library Menu? If so, which one? If it's a Library Menu, the Buttons should have the Sub-picture Highlights Layer in each Buttons Layer Set. If you created the Menu from scratch, did you add a Sub-picture Highlight?
2.) I want to add a video clip that will blend into the main menu, how would I go about doing that?
I do this often. First, I will go into Photoshop, and make a Flattened copy of my Menu, with the Sub-picture Highlight that the user will see (see above), visible. This will then be used in PrPro, as a Freeze Frame. In PrPro, I create the Video file that I want, and at the end, just add that Flattened PSD "Freeze Frame" from the actual Menu. This next part takes just a touch of math, but hang in there with me. We want a seamless transition from that Video to the Menu, so will use a Cross-Dissolve Transition between the Video on the Timeline and the Freeze Frame. We need to set the Duration of that Freeze Frame to just slightly longer than one-half of the Duration of that Cross-Dissolve. All we want is for the full Freeze Frame to be on-screen for a couple of Frames, as the Buttons will be dissolving in, and we do not want the user to begin pressing them yet, as they are NOT real Buttons, but just a graphic of the Buttons. I leave ~ 3 Frames, past the Transition. Remember, when you create that Freeze Frame in Photoshop, you want to make sure that the default Button's Sub-picture Highlight is exactly as the user will see it, when the real Menu comes up.
Export this Video (w/ that Freeze Frame at the end) from PrPro, as say a DV-AVI, and Import it into En as a Timeline. Set that Timeline to First Play, and its End Action to go to your real Menu.
3.) My C:// Drive is very small (60GB) as its just a boot drive SSD.
-3a.) Can I delete the cache without harming my saved encore file? (I only have 1GB left, and my system keeps acting up because of it)
-3b.) Is there a way to set the media cache to a different drive (I have three, and since using After Effects/Encore/Premiere the free space is shrinking at an alarming rate )?
This is a bit tricky. Do you ONLY have the one physical SSD? If so, you will seriously want to look into adding more. You can clear the Media Cache files (do not Delete the folders though), however, En will recreate them, when you begin working on the Project. HDD's are cheap, and for Video editing and authoring HDD real estate is very important. If you have more than the one SSD drive, please give us the full details of your HDD's, and how you are using them.
Good luck, and hope that this helps,
Hunt

Sql_trace does not work for Java app using Oracle JDBC thin driver

Hi,
I'm using Oracle 8.1.7. I enabled sql trace at instance level by setting sql_trace and timed_statistics to true in init.ora. I restarted the db instance. I wrote a stand-alone java application which used Oracle JDBC thin driver(classes12.zip) to make a connection to my db instance, do some select statements, and close the connection. There were no trace files generated in the folder specified by udump_dest variable. However, if I used sqlplus or dba studio, I saw trace files generated. Has anyone got Oracle sql trace work for JDBC calls from java apps.
Thanks in advance!

Hi,
I'm using Oracle 8.1.7. I enabled sql trace at instance level by setting sql_trace and timed_statistics to true in init.ora. I restarted the db instance. I wrote a stand-alone java application which used Oracle JDBC thin driver(classes12.zip) to make a connection to my db instance, do some select statements, and close the connection. There were no trace files generated in the folder specified by udump_dest variable. However, if I used sqlplus or dba studio, I saw trace files generated. Has anyone got Oracle sql trace work for JDBC calls from java apps.
Thanks in advance!

Database link works for OS user "oracle" but not for other clients

My DBA connects as user1 to db1 and successfully queries over database link db2.
[oracle@linux19 ODA]$ sqlplus user1/****@db1
SQL*Plus: Release 11.2.0.3.0 Production on Fri Apr 12 07:39:49 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT * FROM DUAL@db2;
D
XI log in from a Windows XP client and test the same database link with a ORA-12154 result.
C:\>sqlplus user1/****@db1
SQL*Plus: Release 11.2.0.1.0 Production on Fri Apr 12 11:18:18 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT * FROM DUAL@db2;
SELECT * FROM [email protected]
ERROR at line 1:
ORA-12154: TNS:could not resolve the connect identifier specifiedI can create and successfully use database links by including the full TNS entry in the USING string.
What are some possible causes for the different results?
What additional information might I supply to help troubleshoot?
Thanks very much.
- Doug
Edited by: enquad on Apr 12, 2013 2:56 PM
changed "database link db1" to "database link db2" per comments by SB
Edited by: enquad on Apr 12, 2013 3:00 PM
Changed "user" to "OS user" in subject for clarity

enquad wrote:
Sorry gentlemen and SB, but my question is still not answered. It is a new question, which I have not found answered elsewhere.
To summarize:
SB97025 informs me that db1 is not a database link, but I never said that it was. It is the second database (anonymized as "db2") that is connected to through the database link "db2.mycompany.net".
SB97025 also wonders intriguingly if my DBA and I are we really connecting to the same database when we each connect to user1 on db1. Perhaps the Oracle server and my PC have TNSNAMES.ORA files that lead us to different databases for the same TNS alias? I do not believe this is the case, because my DBA created that user1 and that database link in the db1 database specifically for the purpose of doing this test and I see that same link when I connect to user1 on db1. Unless my DBA is spoofing me by creating user1 in two different databases - only one of which contains a working dblink named db2.mycompany.net - just for the purpose of throwing me off, I would have to conclude that he and I are actually connecting to the same database.There is no reason to "believe" (or not) that "this is the case". The entire point of SB's comment on that was to get you to verify. President Reagan famously said "trust but verify". He never worked as a DBA. I say "don't trust, just verify".
Obviously something is different. And at this point the most likely and easiest to confirm is that you and your DBA really are connecting to the same database, on the same host server, using the same link. And at this point all we really have is to trust your DBAs statement.
>
Ed Stevens reminds me that db1 is acting as a client to db2 and so the solutions to the ORA-12154 are the same as for any client connection as listed on his blog (which I had already read), none of which solve my problem. Rembember, the DBA can use the database link, so by whatever means the TNS lookup is happening when he uses it, the correct connection description is being found. The question is not "why does this stinkin' database link not work"? It does work for the DBA.
Pierre wants to make sure I know that it is the Oracle server's TNSNAMES file that is the important thing, not my client's TNSNAMES file, which is true but not relevant to my problem and I was never so naive. He also says that I could try creating a database link by including the full TNS entry in the USING string, which does work as I had already mentioned in my original post.
Amar asks if my DBA can: sqlplus username/password@db2.
The answer is yes. The dba can use SQL*Plus to connect to db2 from the server hosting db1 and can connect to db1 from the server hosting db2. There is almost nothing my DBA cannot do.
None of the posters addressed the key information in my post, which was the different result my DBA and I get when using the same database link in the same schema on the same database. That AND the fact that my DBA is logged on to Linux Oracle serve as user "oracle" and I am logged in to my PC. Why should it matter to a database link which computer is running SQL*Plus or who the OS user is?
Also the GLOBAL_NAMES parameter is set to FALSE.
- Doug

Is Oracle Cluster DVD 11gR1 AIX5L works for AIX6L

Similar Messages

Maybe you are looking for