Is Oracle Partitioning req'd in the Source R/3 system for SBIW Setup Table?

We have ECC6.0 as our Source System. My BI team is trying to load 3 years of SALES history into the BI7.0 system, and then the APO system will pull 1 of those 3 years into it. To begin this process, they are using SBIW to Manage the Extract Structures and create the Setup Tables.
I got an alert that these Setup Tables were created with Partitions. We are not licensed for partitioning in our ECC(R/3) system, only in BI and APO.
1.) Is Partitioning really necessary for these Setup Tables?
2.) It appears that the Setup jobs create these tables by default as partitioned? How do I disable or change that?
Thanks,
Richard (Basis)

Hi Neeraj,
thank you for the reply.
Yes, i have checked tRFCs and logs , everything looks ok, we are getting expected records in BW but job is not ending in the backend system and BW load is always showing YELLOW.
looks like our developer using custom FM to extract data and i feel that something code issue which is going endless loop. they need to write code to terminate process after last record in the extract process. i will update you once i get root cause of the issue.
thanks again..
thanks
Venkata

Similar Messages

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

What is the best course management system for Mac OS X 10.6 Server ?

What is the best course management system for Mac OS X 10.6 Server ? I am reading that many folks have problems with Moodle and 10.6 Server. Is there another course mnagement system?

Minimum v5.3, but no reason to not go with v5.5.

ITAB_NON_NUMERIC_COMPONENT" in the "generation of scrambling programs for non-cluster tables

Dear Experts,
We have are experiencing issues in standalone scrambling,
we are getting error" ITAB_NON_NUMERIC_COMPONENT" in the "generation of
scrambling programs for non-cluster tables"
Please help with the needful
urgently.
Thanks

Hello,
Implement the following SAP note in the execution system and re-execute the
activity 'Generation of scrambling programs for non-cluster tables' to solve this issue.
SAP NOTE : '1915906 - SAP LT V2 SP06: Dump during program generation'
Regards,
Jerrin Francis

Is Mountain Lion the most current operating system for MacBook Pro?

I am wondering if Mountain Lion is the most current operating system for the MacBook Pro. I am under the impression that 'Mavericks' is for the desktop Mac, am I correct? Thank You.

Actually, Mavericks is the current version of OS X replacing Mountain Lion. Mavericks will be replaced later this year by Yosemite. The upgrade to Mavericks is free. You can download the installer from the App Store.

Where do I find the "Number of Qualifying Systems for Right To Copy? I qualified for a free upgrade of montain lion.

I was filling the form to get a free upgrade for the mountain lion. I qualified for that because I bought it in the time stipulated. When they asked me about the number of qualifying systems for right to copy I don't know what to write.

That's for organizations with group licenses. If you are applying as an individual, you can ignore that field.

Post processing activities in BW when only the source R.3 system upgrades

We are currently upgrading from 4.6C to ECC 6.0 or ERP 5.0. We have a BW 3.5.2 connected to the existing 4.6C system.
1) Apart from clearing the delta queue and deleting the set-up job is there any other activity I need to do before the R3 upgrade begins.
2) Once the R3 system is upgraded and unicode enabled apart from connecting the two system and restoring with replication, do I need to do any other post processing in BW or R3
3) The plugin levels are different in BW and R3.
   BW -- PI_BASIS     2004_1_640     0006     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
   ERP -- PI_BASIS     2005_1_700     0009     SAPKIPYJ79     PI_BASIS 2005_1_700
   do we need to upgrade the plugin on BW side or this should work fine.
I am trying to find out any pre or post processing I need to do on R3 or BW side for source system upgrade or any points on testing existing BW system with new source system.
Any help/pointers appreciated.
Thanks
-Pratap Gulabrao

Hi,
I think you had pretty much covered most of the preparation work.... Normally we clear up the delta queue, halt all the scheduled jobs prior to the upgrade and after the upgrade, restore the connection, activate all the transfer structures and update rules again and resume all scheduled jobs.
As for plug-ins, this website should provide what you need :
https://websmp201.sap-ag.de/r3-plug-in
Hope this helps.
Cheers,
Gimmo

Is there possible to specify the source ip address used for Radius

I have a cat6509 configured to talk to Radius server (ACS), as I understood that the IP address used by Cat6k to talk to ACS is by using the nearest interface ip, can i explicitly specify the source address used by Cat6k in this case ?
thanks in advance.

I am not clear whether you are asking about talking to Radius from the switch or from the MSFC? If it is from the MSFC you are correct that by default it will use as source address the address of the outbound interface. On the MSFC you can use the command: ip radius source-interface to specify what address to use.
On the switch I think that it will source its packets to Radius using the management/console IP address rather than the outbound interface. So no command is needed to specify the source interface.
HTH
Rick

Attempting to upload files using the zend _file_transfer system from cs5 training from the source. [was: Question for David Powers]

I am attempting to upload files using the zend _file_transfer system from cs5 training from the source.
On trying to upload to a remote server I am having trouble with the destination setting (C:/upload_test) in the example, please could you point me in the right direction for the an example of this setting for a remote file transfer
Also do I have to construct a connection file to activate a Ftp file transfer?
David Woolston

>I am on windows platform
Who is your host? When you checked your host path in your host control panel, what did it say?
>i have assumed (may be incorrectly) that the purpose of the exercise was to upload to a remote site (ie my website)
That is correct.
>Of course that upload might take place on a computer that does not have DW installed (an internet cafe for example)
That's irrelevant. DW is just the tool you are using to build your site. The site runs on your hosting accounts servers. This includes the php scripts you are working with.
>I have uploaded all files necessary for the operation, when i click upload it returns no such directory exits.
Do you have a url we can check? What destination are you specifying in zend code?
>This made me suspect that I would need to construct a ftp file transfer connection file to satisfied username, password , connection address etc
The exercise you are dealing with is using http file transfer. This has nothing to do with FTP. You do not need FTP for this, other than using it to move your source code from your local client to your server.

Which is the best windows operating system for After Effects CC 2014?

Which is the best compatible windows operating system for After Effects CC 2014?

Thanks Todd_Kopriva for your response. The same thing i saw from adobe website also, but i just want to know in these 3 os which is the best choice.?

Is AirPort Extreme Base Station the right device and reliable for my setup?

hey guys,
i got a 2012 13" macbook air, iphone5 and an 2012 appletv
ive also got two external usb3 2tb powered hdd's that i would to setup towards and use on my network.
i have videos/movies/files/music that i would like to access from the network,
so ive been looking at the extreme device and i can share via sb in the back x1 external hdd.
from what ive googled i can share more devices such as my x2 external hdd's via a powered hub, is that correct?
so my main question is..how fast is the read/copy/write going to be via through a hub?
will it lag/skip if i watch videos on my macbook or straight to my appletv, which supposedly i can do access aswell, is that correct?
just say video file will be 1gb only.. and im going to be only not even 5meters from the extreme device(network).
what transfer rate will it copy/write from and to from one device(usb3 external hdd via powered hub via airport extreme) to my mac?
what is the usb port on the back? 2 or 3?
does anyone have a similar setup or use an airport extreme device for this setup?
and my last question is...
how reliable are these extreme device?
from what i read, these devices only last like two yrs and people have had alot of problems issue with faults etc....

Speed of read/write: if you're going by wireless, you're going to be limited by the wireless speeds. Based on my usage, it seems like wireless N at 5 GHz tops out around 5-6 MB/s (40-48 mbps) with this router. That's fine for video streaming, but will feel slow for heavy file transfer activity.
The USB port on the back of the device is USB 2.0. As a reminder, USB 2.0 is rated for theoretical speeds of 480 mbps, although in practice they're much lower; regardless, it's much faster than the wireless protocols are capable of. Your bottleneck will be the wireless.
I only use a printer with my USB port, so I can't give you any real-world experience with sharing hard drives. You can use a USB hub to expand the ports, but it will need to be a self-powered hub: the Airport Extreme won't power devices through the port. It's also worth noting that trying to use a network-shared disk as a Time Machine drive is a bit flakey; I've read a number of reports where people got it working, but then had their backups become corrupt with time. I haven't read any reports of people having issues with using drives for purposes besides Time Machine, though.
As for reliability, it's hard to say. Nothing lasts forever; you'll find people whose devices failed very quickly, and some who are using generation 1 or 2 devices that are still working just fine. I haven't heard any reports of an usually high failure rate with Airport Extremes. Operation-wise, my Airport Extreme (5th gen) is the most stable router that I've used, and I went through four or five other routers before this one. It's the only router that I have not needed to reboot, even after months of uptime and heavy traffic that usually choked up my other routers. I'm very impressed with it.

Is it possible to use the snow leopard install disk for bootcamp setup?

I'm going to be installing a windows 7 partition through bootcamp on my macbook, but I can no longer find the two original install disks that it came with. So my question was whether or not its possible to go through the bootcamp process with the snow leopard install disk?

Do you mean a "Retail OSX Snow Leopard Install DVD for USD 29" ?
If so, then yes. use it.
Sounds to me like the Original Install Discs you refer to are OSX 10.5 Leopard ones, right ?
These won't work with Windows 7 since Windows 7 requires OSX Snow Leopard DVD at minimum for the Driver Installation and BootCamp Assistant version 3.x as well, which is also only avaiable in OSX Snow Leopard.
http://support.apple.com/kb/HT1899
Stefan

Is it possible to set the database with nulls first for all its tables ?

Hello,
I have a schema of 117 tables and I would like Oracle to behave nulls first when doing any order by on any tables.
Is there a way to tell that respectable old database server to do such a thing ?
As it is today, I have to write some custom DAO specific to Oracle just so as to have a nulls first in the sql statements.
Kind Regards,

user573224 wrote:
I have a schema of 117 tables and I would like Oracle to behave nulls first when doing any order by on any tables.Basically this is an application (sql) issue. If you do not code explicitly, ascending ordering is default and also means that nulls last is the default.
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_10002.htm#i2171079
As 'nulls first' belongs to order by clause of select statment, this seems like a question for the SQL forum. {forum:id=75} That you happen to run sql on XE does not matter.
As it is today, I have to write some custom DAO specific to Oracle just so as to have a nulls first in the sql statements.Changing how a database engine behaves seems like the opposite of dbms agnostic application, if that's the purpose. Also in general, database agnostic/ignorant applications are often considered a sure way to unscalable and unmanageable systems.
One could also consider that customers having Oracle as part of their infrastructure, would like to see that applications make good use of Oracle's strong and highly capable features and options -- not treat it as some sort data dumping bin.
(Ok, granted, with XE this might not be true. Instead there are issues of limitations and lack of support (patches), that you might not want or can take on as an applications vendor.)
Btw, good to see that you've found a fix in sql for your problem, and thank you for reverting back with that to the forum!
Edited by: orafad on Dec 7, 2012 10:29 PM
Edited by: orafad on Dec 7, 2012 10:31 PM

Changing the ABAP Back-End System for the UME

Hi,
I went through many forums; sap notes (943498, 764417, 943602, 940893, 810434) and at help.sap.com
(http://help.sap.com/saphelp_nw70/helpdata/en/9e/fdcf3d4f902d10e10000000a114084/frameset.htm)
I am not able to resolve the issue.
Problem: We already have SSO configured between Portal (EP7) and backend R/3 system (ECC 6) which is working fine. Scenario is that we have dual maintenance system going on. Now we want to move our SSO configuration for Portal to point to new R/3 system, which is exactly same except different server name (same SID, system #, using same ports on different servers). Here is the catch service file for both R/3 system have same service name and port number defined.
R/3 current: sapmsXXX    3601/tcp
R/3 new sys: sapmsXXX     3601/tcp
Will this be causing hte problem or could be something else.
Thank in advance for your inputs!!
Error from the dev_server0 file:
[Thr 172] Fri Mar 28 14:10:19 2008
[Thr 172] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 172] Fri Mar 28 14:10:20 2008
[Thr 172] ***LOG Q0I=> NiPConnect2: connect (146: Connection refused) [nixxi.cpp 2770]
[Thr 172] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 46
(SI_ECONN_REFUSE/146; I4; ST; 156.44.162.55:3601) [nixxi.cpp    2770]
[Thr 172] *** ERROR => MsIAttachEx: NiBufConnect to server.name/sapmsXXX failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
[Thr 172] *** ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
[Thr 172] *** ERROR => LgIGroupX: LgIAttach(rc=-101) [lgxx_mt.c    4284]
[Thr 172] *** ERROR => JRFC> Error jrfc_lg LgGroup failed(-101) [jrfclg_mt.c 344]
[Thr 172] *** ERROR =>       mshost: server.name, msserv: sapmsXXX, r_group: BASIS [jrfclg_mt.c 345]
[Thr 14] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 14]
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes
for additional information and trouble shooting.
[Thr 14] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 14] JLaunchCloseProgram: good bye (exitcode = -11113)

Hi Patel,
It seems that the portal cannot attach backend system via load balancing.
1- Can you access to port# 3601 on 156.44.162.55 via telnet, from your portal system?
2- Did you checked your firewall settings on both systems?
Best regards,

How can I reduce the amount of user prompts for Email setup in Apple Configurator?

I am working on deploying profiles via Apple's new Apple Configurator which allows me to install apps and settings exactly how I want them. My question pertains to the email setup where anything left blank in the payload gets prompted on the device for user input. Is there anyway to have the user only enter in their user name and password once and use that for the SMTP outgoing settings as well? I'd like to reduce the user interaction to a minimal.Currently they enter in their full name, email address, user name for incoming, password for incoming, and then user name AGAIN for outgoing (I checked the box for 'Outgoing password same as incoming'). Is there anyway to retain the username and avoid having the user enter it in twice?
If not, I can make do with how it is, but was rather curious if this is possible. Any help would be greatly appreciated.

I'll try this again starting it as new, but when I restored it before (after deleting all the apps and music off it) it didn't help. Thanks for the suggestion!

Is Oracle Partitioning req'd in the Source R/3 system for SBIW Setup Table?

Similar Messages

Maybe you are looking for