Is oracle user created by default during installation of OEL 5
i want to know that is oracle user and its groups already created by default during installation of OEL 5.5 ??
user13376823 wrote:
i want to know that is oracle user and its groups already created by default during installation of OEL 5.5 ??Why would it? It's just an operating system. It doesn't know or care what applications you may or may not choose to install at any time in the future after it (the OS) is installed, nor does it know or care about the requirements of any application you may choose to install at any time in the future.
Similar Messages
-
What is the password for 'oracle' user created during XE installation?
Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
NHi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N -
Oracle BI 11.5 Error during installation
During installation Oracle BI 11.5 at Win2003 server 32-bit there are some error at stage 'Creating Domain' and 'Deploying Base Setup'
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
DEBUG : Loading the 32 bit dll here
DEBUG : Loading DLL : D:/oracle_middl/Oracle_BI1/install/config/StartUtil.dll
DEBUG : Loaded DLL : D:/oracle_middl/Oracle_BI1/install/config/StartUtil.dll
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3179)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Executing Task: Setting Up Weblogic
progress in calculate progress2
Executing Task: Deploying Base Setup
AdminServer port is 7001
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.ConfigTemplateTask.doExecute(ConfigTemplateTask.java:34)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.weblogic.ASDomain.connectToAdminServer(ASDomain.java:369)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:411)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Caused by: oracle.as.provisioning.util.ConfigException:
Unable to connect to the AdminServer.
Cause:
An internal operation has failed:Bad host: "asus-win_1"
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain._connectToAdminServer(ASDomain.java:438)
at oracle.as.provisioning.weblogic.ASDomain.connectToAdminServer(ASDomain.java:359)
... 16 more
Caused by: java.net.MalformedURLException: Bad host: "asus-win_1"
at javax.management.remote.JMXServiceURL.validateHost(JMXServiceURL.java:459)
at javax.management.remote.JMXServiceURL.validateHost(JMXServiceURL.java:361)
at javax.management.remote.JMXServiceURL.validate(JMXServiceURL.java:337)
at javax.management.remote.JMXServiceURL.<init>(JMXServiceURL.java:321)
at oracle.as.provisioning.weblogic.AdminServer.connect(AdminServer.java:89)
at oracle.as.provisioning.weblogic.ASDomain._connectToAdminServer(ASDomain.java:405)
... 17 more
I can ping host "asus-win_1", also insert string with "asus-win_1" into file hosts but has the same error.I'm using simple installation and it's fresh installation.
I guess I found the trouble. The Win2003 server worked at virtual machine and actually it was VirtualBox. But I've reinstalled Win2003 server at VMWAre and Oracle BI installation finished without any problem.
Edited by: Eugene on 30.06.2011 7:19 -
B1DE Advanced setup and creating UDO object during installation
Hi,
I am developping addons on B1 2007B and use the B1DE advanced setup package.
Is there a way in the CustomInstallerClass to connect to the B1 Application to create UDO tables ?
Regards,
GrégoryHi Gregory,
Tables and UDOs creation in DI API should not be done during installation. You should do that in your addon after connecting to the DI API.
You need some code in your addon checking whether the UDT, UDF, UDOs,... already exist, if they don't exist then you create them. You can manage that with a user table were you can keep the current version of your installed addon, this way you can know whether you need to create/update something in your Db every time you start your addon or not.
Regards,
Trinidad. -
Restricting administrator tab to user created with default role OIM 11g R2
Hi,
I have a query, if we create a user in OIM 11g R2 without any admin role and then login to Self Service screen (Identity) with the newly created user, we can see the Administration Tab is visible to the user.
Is this mean that by default user is having admin role assigned to him to do some of the admin activities.
Please let me know how to control this behavior and not to show the Administration tab to the user until and unless he is having some admin roles assigned to him.
Please help.You can hide Administration tab for normal users using EL's. By default users will get this tab when they login to identity console even though admin role is not assigned to them. But if you do any operation on any users, request will be raised accordingly.
Check this link to configure EL's http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#autoId18 -
Oracle Net configuration assitant Failed during installation
Hi, all
I was running oracle database 11.2.0 on windows xp service pack 3
I deinstalled it and reinstalled again.
everything wet well until it reached to configure Net configuration assistant which was failed to start.
Now i can not start Net configuration assistant as well as can not create listener with lsnrctl commandline utillity. all the time i tried to create a listener it does not create.
I tried to start net configuration assistant from programe list in windows it is not starting. while installation it generated a log file the enteries related to net configuration are as follows . Please note that i have installed java 1.7.0 on my machine
and also i can not start dbcontrol and there is no mention of dbcontrol in program list too.
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO:
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = D:\app\oracle\product\11.2.0\dbhome_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp,nmp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = D:\app\oracle\product\11.2.0\dbhome_1\network\install\netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0b2d98ca, pid=144, tid=4064
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b03 mixed mode)
INFO: # Problematic frame:
INFO: # C [oranl11.dll+0x498ca]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid144.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
any solutionIt seems you have a problematic java frame (perhaps bug) and need to check out the reason in the hs_err_pid144.log file.
-
Disable read mode by default during installation
I am currently trying to disable read mode by default as a part of the software installation.
I have searched the msi file using the customization wizard but have not found any part of it that refers to this setting.
Is there a reg key or a setting in the MSI I can change to disable this setting?
Edit:
This is for Reader XI have been able to figure out the answer, so I'll put it into here in case anyone else wants to do this.
The following registry key has to be added to the msi or mst
HKCU > Software > Adobe > Acrobat Reader > 10.0 > AVGeneral
Dword - bBrowserDisplayInReadMode = 0 -
Outlook window getting the keyboard focus instead of user created Form Window during Outlook Startup
This MAPILogonComplete method involves creating a Form Window to show "What's New" of a certain Addin version (DisplayWhatsNewDialog() in the code):
private void _outlook_MAPILogonComplete() {
_logger.Info("_outlook_MAPILogonComplete");
try
if (_timerForm != null)
_timerForm.Timer.Stop();
_timerForm.Timer.Dispose();
catch (Exception ex2)
_logger.Error(ex2.Message, ex2);
try
if (Globals.BJNSettings.showWhatsNew)
Globals.BJNSettings.showWhatsNew = false;
UIHelper.DisplayWhatsNewDialog(false);
Ol.Inspector insp = null;
if (_inspectors.Count > 0)
for (int i = _inspectors.Count; i >= 1; i--)
insp = _inspectors[i];
WrapInspector(insp);
insp = null;
Ol.Explorer expl = null;
if (_explorers.Count > 0)
for (int i = _explorers.Count; i >= 1; i--)
expl = _explorers[i];
WrapExplorer(expl);
expl = null;
GetAddinsList();
Thread logSystemInfoThread = new Thread(new ThreadStart(LogSystemInformation));
logSystemInfoThread.TrySetApartmentState(ApartmentState.STA);
logSystemInfoThread.IsBackground = true;
logSystemInfoThread.Start();
try
Ol.NameSpace ns = _outlook.GetNamespace("MAPI");
_calFolder = ns.GetDefaultFolder(Ol.OlDefaultFolders.olFolderCalendar) as Ol.Folder;
_calFolder.BeforeItemMove += new Ol.MAPIFolderEvents_12_BeforeItemMoveEventHandler(_calFolder_BeforeItemMove);
_delFolder = ns.GetDefaultFolder(Ol.OlDefaultFolders.olFolderDeletedItems) as Ol.Folder;
Marshal.ReleaseComObject(ns);
ns = null;
catch (Exception ex)
_logger.Error(ex.Message, ex);
UIHelper.WriteDoNotDisableKeyToRegistry();
Globals.AppointmentsToProcess = new List<string>();
_timerForm.ProcessTimer.Interval = 3000;
_timerForm.ProcessTimer.Start();
catch (Exception ex)
_logger.Error(ex.Message, ex);
DisplayWhatsNewDialog() has this signature:
public static void DisplayWhatsNewDialog(bool modal)
try
string defaultWhatsNewFile = Globals.BJN_APP_BASE_DIRECTORY + "WhatsNew.txt";
string localISOLanguageName = Languages.GetTwoLetterISOLanguageName();
string localizedWhatsNewFile = Languages.GetInstalledLocalizedFilePath(localISOLanguageName, "WhatsNew.txt");
if (String.IsNullOrEmpty(localizedWhatsNewFile))
localizedWhatsNewFile = defaultWhatsNewFile;
if (File.Exists(localizedWhatsNewFile))
BJNWhatsNew whatsNew = new BJNWhatsNew(localizedWhatsNewFile);
if (modal)
whatsNew.ShowDialog();
whatsNew.Dispose();
else
whatsNew.TopMost = true;
whatsNew.Show();
whatsNew = null;
catch (Exception ex)
_logger.Error(ex.Message, ex);
The problem is if the Window is made modal, it blocks the Outlook to launch and also goes back of the Outlook loading window (Whats New window will not be having keyboard focus). And if the Window is made non-modal (passing false to DisplayWhatsNewDialog()),
Outlook launches properly and What's New window comes at the top but will not be having keyboard focus; instead the launched Outlook window will be having the keyboard focus. May anyone please suggest a way to make the What's New window to be always having
the keyboard focus? Structure of form window class BJNWhatsNew is given below:
public partial class BJNWhatsNew : Form
private static ILog _logger = LogManager.GetLogger(typeof(BJNWhatsNew));
public BJNWhatsNew(string whatsNewTextFileName)
InitializeComponent();
InitLabels();
InitEventHandlers();
InitWhatsNew(whatsNewTextFileName);
private void InitLabels()
try
this.Text = Properties.Resources.bjn_version_info_caption;
this.buttonClose.Text = Properties.Resources.ok_hotkey;
this.labelBJNAddin.Text = Properties.Resources.bjn_version_ol_addin;
this.labelVersion.Text = String.Format(Properties.Resources.version_format, Assembly.GetExecutingAssembly().GetName().Version.ToString(3));
Assembly assembly = Assembly.GetExecutingAssembly();
FileInfo fileInfo = new FileInfo(assembly.Location);
DateTime buildDate = fileInfo.LastWriteTime;
string formatString = "d MMM, yyyy";
this.labelReleaseDate.Text = String.Format(Properties.Resources.bjn_version_release_date, buildDate.ToString(formatString));
catch (Exception ex)
_logger.Error(ex.Message, ex);
private void InitEventHandlers()
this.buttonClose.Click += new EventHandler(buttonClose_Click);
private void InitWhatsNew(string whatsNewTextFileName)
try
if (File.Exists(whatsNewTextFileName))
StreamReader sr = new StreamReader(whatsNewTextFileName);
string whatsNew = sr.ReadToEnd();
sr.Close();
this.richTextBox1.Text = whatsNew;
this.richTextBox1.SelectionLength = 0;
this.buttonClose.Select();
this.buttonClose.Focus();
catch (Exception ex)
_logger.Error(ex.Message, ex);
void buttonClose_Click(object sender, EventArgs e)
this.Close();Hello Prasad,
The ShowDialog method will block the current thread. If you want to continue working with Outlook objects you need to use the Show method instead. The key fact is that both methods (Show and ShowDialog) accepts an instance of the IWin32Window interface
which allows to specify the parent window handle. Specifying the parent window handle (Outlook Explorer window) to the Show method you can make your window shown on top of Outlook all the time.
To get the HWND of an Outlook explorer object (e.g. Application.ActiveExplorer), cast it to IOleWindow and call IOleWindow.GetWindow(). Also you may find the
How to get the IWin32Window for Outlook
article helpful. -
Oracle RAC 11.2.0.3 installation on OEL 6.3 HAIP error
Hi friends
i have these big problem, i tried to install RAC on these two virtual machines before i do the production enviroment and here are the problems i am facing
=========================
Operating system OEL 6.3
GRID 11.2.0.3
DB 11.2.0.3
===========================
1. during pre requset test /etc/resolv.vonf failed saying PRVF-5636 : The DNS response time for an unreachable node can not be found . . .. but i cheked everything
[root@ubsrac1 /]# nslookup ubsrac1
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac1.kifiya.com
Address: 192.168.0.117
[root@ubsrac1 /]# nslookup ubsrac1-vip
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac1-vip.kifiya.com
Address: 192.168.0.119
[root@ubsrac1 /]# nslookup ubsrac2
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac2.kifiya.com
Address: 192.168.0.118
[root@ubsrac1 /]# nslookup ubsrac2-vip
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac2-vip.kifiya.com
Address: 192.168.0.120
[root@ubsrac1 /]# nslookup ubsrac-scan
Server: 192.168.0.100
Address: 192.168.0.100#53
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.139
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.136
Name: ubsrac-scan.kifiya.com
Address: 192.168.0.138
====================================
And for unknow host here is the output
[root@ubsrac1 /]# time nslookup unknown-not-reachable-node
Server: 192.168.0.100
Address: 192.168.0.100#53
** server can't find unknown-not-reachable-node: SERVFAIL
real 0m0.019s
user 0m0.003s
sys 0m0.008s
[root@ubsrac1 /]#
=====================================
Everything is ok on both the nodes........... but still i get the PRVF-5636 : The DNS response time
==========================
output of /etc/hosts
[root@ubsrac1 /]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
#Network configuration for ubsrac1
192.168.0.117 ubsrac1 ubsrac1.kifiya.com
192.168.0.119 ubsrac1-vip ubsrac1-vip.kifiya.com
172.16.1.17 ubsrac1-priv ubsrac1-priv.kifiya.com
#Network configuration for ubsrac2
192.168.0.118 ubsrac2 ubsrac2.kifiya.com
192.168.0.120 ubsrac2-vip ubsrac2-vip.kifiya.com
172.16.1.18 ubsrac2-priv ubsrac2-priv.kifiya.com
=============================================
and i ignored and went with installation and excuted root.sh on the first node and here is the last output where i get the HAIP error
Adding Clusterware entries to upstart
CRS-2672: Attempting to start 'ora.mdnsd' on 'ubsrac1'
CRS-2676: Start of 'ora.mdnsd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'ubsrac1'
CRS-2676: Start of 'ora.gpnpd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'ubsrac1'
CRS-2672: Attempting to start 'ora.gipcd' on 'ubsrac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'ubsrac1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'ubsrac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'ubsrac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'ubsrac1'
CRS-2676: Start of 'ora.diskmon' on 'ubsrac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'ubsrac1' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk a745c85386eb4f4fbfa0f3b25c48a1e9.
Successful addition of voting disk 146d859894f64f0cbf8172ecabd0e40a.
Successful addition of voting disk 7c41353b913b4f6dbf1b5c56f9661e28.
Successful addition of voting disk 5364b3e4d2f14fe9bf69207f38af44c5.
Successful addition of voting disk 6376684a593a4fd1bf50e89459820d8c.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE a745c85386eb4f4fbfa0f3b25c48a1e9 (ORCL:CRSVOL1) [DATA]
2. ONLINE 146d859894f64f0cbf8172ecabd0e40a (ORCL:CRSVOL2) [DATA]
3. ONLINE 7c41353b913b4f6dbf1b5c56f9661e28 (ORCL:CRSVOL3) [DATA]
4. ONLINE 5364b3e4d2f14fe9bf69207f38af44c5 (ORCL:CRSVOL4) [DATA]
5. ONLINE 6376684a593a4fd1bf50e89459820d8c (ORCL:CRSVOL5) [DATA]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'ubsrac1'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted. For details refer to "(:CLSN00107:)" in "/oragi/11.2.0.3/grid/log/ubsrac1/agent/ohasd/orarootagent_root/orarootagent_root.log".
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'ubsrac1' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'ubsrac1'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'ubsrac1' succeeded
CRS-4000: Command Start failed, or completed with errors.
HAIP startup failure considered fatal, terminating at /oragi/11.2.0.3/grid/crs/install/crsconfig_lib.pm line 1263.
/oragi/11.2.0.3/grid/perl/bin/perl -I/oragi/11.2.0.3/grid/perl/lib -I/oragi/11.2.0.3/grid/crs/install /oragi/11.2.0.3/grid/crs/install/rootcrs.pl execution failed
======================================================
final out out is as follows
[grid@ubsrac1 bin]$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 OFFLINE OFFLINE Instance Shutdown
ora.cluster_interconnect.haip
1 ONLINE OFFLINE
ora.crf
1 ONLINE ONLINE ubsrac1
ora.crsd
1 OFFLINE OFFLINE EXCLUSIVE
ora.cssd
1 ONLINE ONLINE ubsrac1
ora.cssdmonitor
1 ONLINE ONLINE ubsrac1
ora.ctssd
1 ONLINE ONLINE ubsrac1 ACTIVE:0
ora.diskmon
1 OFFLINE OFFLINE
ora.evmd
1 OFFLINE OFFLINE
ora.gipcd
1 ONLINE ONLINE ubsrac1
ora.gpnpd
1 ONLINE ONLINE ubsrac1
ora.mdnsd
1 ONLINE ONLINE ubsrac1
[grid@ubsrac1 bin]$
please i need help . . .. i am stuck here i searched the web and tried things for days and i seem to run out of ideas and solutions
any help will be greaatley aperciated ............
Thanks in advance
Regards
Rediethi damorgan
here is the out put sir, . ................
================================================
tail -200 /oragi/11.2.0.3/grid/log/ubsrac1/agent/ohasd/orarootagent_root/orarootagent_root.log
2012-10-22 08:22:33.539: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:22:33.539: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:23:00.074: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23943
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:23:02.528: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:23:02.528: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:23:03.542: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:23:03.542: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:23:32.526: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:23:32.526: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:23:33.550: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:23:33.550: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:24:00.077: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23947
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:24:02.530: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:24:02.530: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:24:02.531: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:24:03.554: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:24:03.554: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:24:30.088: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23951
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:24:32.542: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:24:32.542: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:24:33.553: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:24:33.553: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:24:33.553: [CLSFRAME][3074782976] {0:11:5628} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:24:33.557: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:24:33.557: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:25:02.551: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:25:02.551: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:25:03.565: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:25:03.565: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:25:30.091: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23955
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:25:32.554: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:25:32.554: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:25:33.567: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:25:33.567: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:26:00.103: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23959
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:26:02.556: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:26:02.556: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:26:03.569: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:26:03.569: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:26:32.562: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:26:32.562: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:26:32.563: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:26:33.576: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:26:33.576: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:00.106: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23963
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:27:02.569: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:27:02.570: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:27:03.581: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:27:03.581: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:27:03.581: [CLSFRAME][3076884224] {0:11:5630} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:27:03.583: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:27:03.583: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:30.117: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23967
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:27:32.570: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:27:32.570: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:27:33.584: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:27:33.585: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:27:33.585: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5440
2012-10-22 08:28:02.580: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5440], buflen=8
2012-10-22 08:28:02.580: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5440]: mode[0xcc] offset[0 ms].
2012-10-22 08:28:03.593: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:28:03.595: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:28:30.120: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23971
2012-10-22 08:28:32.581: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:28:32.581: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:28:32.581: [CLSFRAME][3074782976] {0:11:5632} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:28:32.584: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:28:32.584: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:28:33.598: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:28:33.598: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:28:33.600: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:29:00.132: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23975
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:29:02.585: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:29:02.585: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:29:03.600: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:29:03.600: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:29:30.145: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23977
2012-10-22 08:29:32.586: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:29:32.586: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:29:32.586: [CLSFRAME][3076884224] {0:11:5634} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:29:32.589: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:29:32.589: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:29:32.590: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:29:33.603: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:29:33.603: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:30:02.596: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:30:02.597: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:30:03.608: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:30:03.608: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:30:03.608: [CLSFRAME][3074782976] {0:11:5636} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
2012-10-22 08:30:03.612: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:30:03.612: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:30:30.147: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23983
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:30:32.601: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:30:32.601: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:30:33.615: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:30:33.616: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:31:00.158: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23987
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:31:02.601: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:31:02.601: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:31:03.616: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:31:03.616: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:31:32.610: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:31:32.610: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:31:33.625: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:31:33.625: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:32:00.160: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23991
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:32:02.613: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:32:02.613: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:32:03.628: [ora.crf][3076884224] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:32:03.628: [ora.crf][3076884224] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:32:03.628: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:32:30.173: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23995
[ clsdmc][3076884224]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=A4000930
2012-10-22 08:32:32.616: [ora.ctssd][3076884224] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9ba4000930], buflen=8
2012-10-22 08:32:32.616: [ora.ctssd][3076884224] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9ba4000930]: mode[0xcc] offset[0 ms].
2012-10-22 08:32:33.630: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:32:33.630: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:33:02.622: [ AGFW][3097618208] Recvd request to shed the threads
2012-10-22 08:33:02.622: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 2. Current # is 3
2012-10-22 08:33:02.622: [CLSFRAME][3076884224] {0:11:5638} Worker thread is exiting in TM [MultiThread] to meet the desired count of 2. New count is 2
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:33:02.625: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:33:02.625: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:33:03.639: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:33:03.639: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:33:30.177: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:23999
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:33:32.631: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:33:32.631: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:33:33.635: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:33:33.635: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:34:00.177: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24003
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:34:02.631: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:34:02.631: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:34:03.646: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:34:03.646: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:34:30.184: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24007
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:34:32.637: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:34:32.637: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:34:33.651: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:34:33.651: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
2012-10-22 08:35:00.188: [ AGFW][3072681728] {0:0:185} Agent received the message: AGENT_HB[Engine] ID 12293:24009
[ clsdmc][3074782976]CLSDMC.C returnbuflen=8, extraDataBuf=CC, returnbuf=B00D5520
2012-10-22 08:35:02.641: [ora.ctssd][3074782976] {0:0:185} [check] clsdmc_respget return: status=0, ecode=0, returnbuf=[0x7f9bb00d5520], buflen=8
2012-10-22 08:35:02.642: [ora.ctssd][3074782976] {0:0:185} [check] translateReturnCodes, return = 0, state detail = ACTIVE:0Checkcb data [0x7f9bb00d5520]: mode[0xcc] offset[0 ms].
2012-10-22 08:35:02.642: [CLSFRAME][3097618208] TM [MultiThread] is changing desired thread # to 3. Current # is 2
2012-10-22 08:35:03.656: [ora.crf][3074782976] {0:0:193} [check] clsdmc_respget return: status=0, ecode=0
2012-10-22 08:35:03.656: [ora.crf][3074782976] {0:0:193} [check] Check return = 0, state detail = NULL
[root@ubsrac1 ~]#
================================
please take a look at it
Thanks in advance
Edited by: Red8 on Oct 22, 2012 5:50 AM -
Oracle user installation issue
I followed the instructions from
http://docs.oracle.com/cd/E16655_01/install.121/e17752/usr_grps.htm#BACGFIFJ
on my Solaris 11.1 VirtualBox box.
Since i used the Solaris 11.1 - Text install, i don't have a graphical interface (no X11)
i created an oracle user, as per the documentation instructions, using the command:
# /usr/sbin/useradd -u 54321 -g oinstall -G dba,oper oracle
The instructions in the following section http://docs.oracle.com/cd/E16655_01/install.121/e17752/usr_grps.htm#BABBHHAD
say i should modify the .bash_profile file (which i assume is in the user's home directory)
The problem is that the oracle user created using the earlier command has no home directory. Actually, after logging in as oracle, i get the following message:
No directory! Logging in with home=/
# grep oracle /etc/passwd
oracle:x:54321:54321::/export/home/oracle:/usr/bin/bash
but /export/home/oracle does not exist.
When i try to mkdir /home/oracle i get:
mkdir: Failed to make directory "/home/oracle"; Operation not applicable
Needless to say, i cannot follow the rest of the Installation guide since user oracle has no home.
I understand that this is mostly a Solaris admin question, but my issue is with the installation guide for not being clear about its assumptions, which is why i posted this here.
Edit:
some more output:
root@solaris:~# ps -alfe | grep auto
0 S root 2293 1 0 40 20 ? 2500 ? 23:53:30 ? 0:00 /usr/lib/autofs/automountd
0 S root 2294 2293 0 40 20 ? 2573 ? 23:53:30 ? 0:00 /usr/lib/autofs/automountd
root@solaris:~# uname
SunOS
root@solaris:~# uname -a
SunOS solaris 5.11 11.1 i86pc i386 i86pc
root@solaris:~# cat /etc/release
Oracle Solaris 11.1 X86
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Assembled 19 September 2012
after some digging, i found that this is a known bug, included in Solaris 11.1's Release notes.
Funny thing, this bug is listed as "Previously Documented Bug, Fixed in Solaris 11.1
7070558 When the automount Service Is Disabled, useradd Creates Users With Inaccessible Home DirectoriesFinally found my answer in another document. Setting Up and Managing User Accounts by Using the CLI - Managing User Accounts and User Environments in Oracle Solaris …
Apparently, with Solaris 11.1 one must use the -d and the -m switches when creating a new local user.
So the correct command to have issued is this:
/usr/sbin/useradd -u 54321 -g oinstall -G dba,oper -d localhost:/export/home/oracle -m oracle
Once the command was issued, the /export/home/oracle directory was created, (due to the -m switch), and because the user's home directory contains the hostname: part, this means that the /etc/auto_home file was updated.
Once i logged in into the oracle account, the /home/oracle directory was created by autofs.
The Oracle 12c documentation concerning the Solaris 11.1 OS should be updated to include the -d and -m switches. -
Oracle net configuration assistent failed during database installation
Hi,
I am installing oracle database 10g in oel5 during installation the oracle net configuration has failed
Pls provide me solution to overcome this problem while i am in the middle of the installationHi user;
Please check CONFIGURATION ASSISTANT ''OMS CONFIGURATION'' FAILED OUI-25031 and see its helfpul for your issue
Regard
Helios -
New Oracle User Report...
Ok so here's an easy one for you lovely people. I have a need to run a report that will show all the new Oracle users created from Jan 1, 2007. I'm not sure where I would pull this information from. Anyone have any ideas? Thanks.
LukeHi, you can get this information from DBA_USERS view, something like this.
SELECT * FROM DBA_USERS WHERE TRUNC(CREATED)>=TO_DATE('DD/MM/YYY','01/01/2007')
Good luck.
Regards. -
Need help on exporting oracle users
Hi,
we currently on oracle ver. 7.3.3 with quite a number of oracle users created. We are in the midst of migrating over to Oracle ver. 8.1.7. We want to preserve the user details, so we don't have to recreate all of them again.
How do I export the users from ver. 7.3.3 over to ver. 8.1.7, preserving the user passwords, profiles, rights, etc?
Any help would be appreciated.
Thanks.Hi Mr. Hian,
Take a Full database export from 7.x by connecting as SYS user (with FULL=Y) and import in the same in 8.1.7. Only thing u need to do here is to create all the required tablespaces(tablespaces used in 7.1.x DB) in 8.1.7 DB before importing the Db.
Hope this helps,
regds,
Suresh.A -
Creating Logical Volume during Oracle VM installation
Hello,
I am trying to install Oracle VM Server on a machine with 2 TB hard-disk. There are 2 disks each with 1 TB capacity.
During Oracle VM Server 2.2.2 installation, if you go with default partitions, layout looks like this
/dev/sda
sda1 101M ext3 /boot
sda2 952737M ocfs2 /OVS
sda3 1027M swap
/dev/sdb
sdb1 3074M ext3 /
Free space 950792M Free SpaceIdeally I would like to give everything except what is needed by */ (root), /boot* and swap to */OVS*.
So from the layout above, I also want to give Free Space to */OVS*.
This excerpt talks about Logical Volume Creation during Oracle VM installation.
During the Oracle VM Server installation, press Alt+F2 to use the terminal, and run the lvm command. When you have finished creating the LVM configuration, press Alt+F1 to return to the Oracle VM Server installation.
But I couldn't figure out how to do this? Can anyone give me exact steps to achieve what I am trying to achieve.
regards, YoraHi again
It seems I downloaded by mistake the Oracle VM Server 3.0.1 Source for x86_64 (64 bit).
I should have downloaded the Oracle VM Server 3.0.1 for x86_64 (64 bit).
Now I can get started
Rudi -
Where do we use the three users created during BPC installation
Hi Experts,
I just want to know where we use the three users we create during installation. Because without AppSet the users cannot log in.
Though we map three different domain users in "UJA3_WRITE_SYS_USERS", except the user BPC_SYSADMIN, I think we cannot use the other users without assigning the Appset. Please correct me if I am wrong.
Thanks in advance.
Regards,
Bobbyok I think there is some confusion here and that we are not all talking of the same thing...
there are ABAP users, and there are Windows users (or in the case of 7.5, possibly CMS users).
the ABAP users are used exclusively by the .Net server to connect to the ABAP server. They are never used to login from a client machine.
The Windows (or AD or CMS) users are used to login to the clients.
The .Net server will authenticate those logins from the clients, will then look in the tables in ABAP to check the rights of that user, and then take action based on those steps. If the user is authenticated and has the required rights to the appset, then the .Net server will perform the actions that the windows user is requesting. To perform those actions, it will connect to the ABAP server under one of the 3 ABAP accounts as described earlier
so if the user is in Admin and for example wants to process a dimension, the .Net server will use ABAP account BPC_admin to connect to ABAP and take action.
if the user is in BPC for Excel and wants to input data in a schedule, the .Net server will connect using BPC_user to ABAP server and take action.
in other words, those 3 accounts are completely transparent to the client side, are never used on the client side, and can be consider as internal to the server, as they are used only between servers.
once BPC is installed, only the windows account that was used to install the .Net componenet will have access. That account can be used to install the admin client and to login to the admin client. From there, other windows accounts can be given rights to BPC.
I hope this helps and clarify
best regards
Bruno Ranchy
Maybe you are looking for
-
I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered). If the
-
Integrated Authentication not working for firefox 31 and above for NTLMv2
Users browsing from a Citrix session are being asked to authenticate using Firefox on newer versions (31-35) as they used to pass authentication transparently via NTLMv2 in earlier versions. This does not happen on IE so wondering what to do to get t
-
How do i authorize my new mac for purchases
just got a new mac and need to authorize it for my itunes account how do I do that?
-
Hi, I have encouter this problems when I was doing image retreival for certain device. Attached are the problems faced Anyone know the cause?
-
GroupWise POA Agent stopping several times a week.
We have two servers Suse Linux 11.1 64/OES11 with services GroupWise 8.0.2, (POA, MTA and GWIA), we have two post offices, one with 300 and another with 500 users. When this service was running GroupWise on Netware 6.5, worked perfectly. After migrat