Is OS X Server for me?

Hello all,
I've scanned through the forums trying to find my answer, but I found that each question is unique and so is mine:
I want to start hosting webpages, now my ISP gives me static 5 IP's, I can already see that I will need to host more than 10 webpages varying in complexity. Each website will be different i.e. www.joeswebsite.com , www.carfansite.com etc.
So my question is, is it possible to do this and what would I have to do?

You didn't find any answers to this? I'm surprised.
You don't need more than 1 IP address to host multiple sites unless you're using HTTPS.
You can just setup all the sites on the same IP address using Server Admin. As long as each one has a different name the server will be able to work out which virtual host to use, and therefore what document root on disk to serve the content from.
Of course, if you have multiple addresses you can do it that way, too - just specify the IP address of each site in Server Admin instead of the hostname, but either way, it's standard practice, and all doable via Server Admin.

Similar Messages

  • Recently backing up my ipad onto my macbook, which is the backup server for all of my gadgets.  This includes all my photos and tons of music.  The macbook said it could not backup the ipad because there was insufficient disc space to do so. What now?

    I have a macbook operating OSX10.6.7.  Recently backing up my ipad which had lots of photos from a recent vacation.  I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music.  It just told me that it couldn't back up the ipad bc there wasn't enough disc space.  I was afraid that this would happen eventually.  What next?  Newer laptop with more space?  I'm not sure what files I could sacrifice to free up more space as most of these are important.

    What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.

  • Old school with CS2.  Haven't used in a while and am unable to use the program as it says my serial number is invalid. Customer service tells me the server for CS2 has been shut down.  Then they sent me here for help.  Does anyone have any advice?

    I don't have a clue what I am doing with this.  Here is my discussion with Customer Service:
    Naresh: Hello! Welcome to Adobe Customer Service.
    Naresh: Hi Mary.
    Naresh: I understand you have been getting invalid serial number, am I right?
    Mary Vance: Hi
    Mary Vance: yes
    Naresh: Please provide me with the serial number, Mary.
    Mary Vance: I provided my serial number here
    Naresh: Thank you for the serial number.
    Naresh: Please allow me 2-3 minutes while I check your serial number.
    Mary Vance: no problem
    Naresh: Thank you.
    Naresh: Thank you for being online.
    Naresh: I would like to inform you that the server for CS2 products have been shut down by adobe since then you are not able to install the product.
    Naresh: However, I will provide you the link to download CS2 application. Please visit the following link.
    Mary Vance: will this allow me to reinstall Photoshop?
    Naresh: Yes, Mary.
    Mary Vance: ok...what is that link?
    Naresh: Please clcik here to download.
    Mary Vance: thank you....trying it now
    Naresh: You are welcome.
    Naresh: I will also provide you the link for further information regarding the installation of CS2 products.
    Mary Vance: the download doesn't have anything regarding installation
    Naresh: Please click for the information.
    Naresh: I am sorry for providing wrong link.
    Naresh: Please click here to download.
    Naresh: The 3rd link is for the download of CS2 Photoshop.
    Naresh: Were you able to view the download link, Mary?
    Mary Vance: what file in that download is supposed to help me?
    Mary Vance: the first and 3rd link were the same
    Mary Vance: when trying to load from my software, I get the message saying my serial number is not valid. All I need is a serial number that works. Is that going to be possible?
    Naresh: Mary, Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
    Naresh: So you will have to download the software from the above link.
    Naresh: May I know in what OS you are trying to install the software?
    Mary Vance: the link sends me to a CS2 help package
    Mary Vance: windows 7
    Naresh: I am sorry you will not be able to install the CS2 application on Windows 7 since it does not support CS2 version.
    Mary Vance: I have had on here for a few years...why all of a sudden would it not work? Illustrator is fine.
    Naresh: Okay.
    Naresh: You can try downloading the software.
    Mary Vance: was the original link that you sent me suppose to allow me to download Photoshop?
    Mary Vance: I did try and got the message that the serial number is invalid. Is there any way to get around this or should I throw it away?
    Naresh: May I know whether you uninstalled the product.
    Naresh: ?
    Mary Vance: I did uninstall Photoshop only. Then I tried reinstalling Photoshop only and got the message about the serial number.
    Naresh: I check and see that it seems to be a technical issue, I request you to please post your query to the forums so that you will get the resolution from our expertise and I'll provide you the link to visit the forums.
    Naresh: Please click here to visit the forums.
    Mary Vance: I guess I will try that.
    Naresh: Yes, please.
    Naresh: Is there anything else I can help you with?
    Mary Vance: I don't see where you helped me with this yet, so I guess not!
    Naresh: I am sorry for the inconvenience.
    Naresh: Thank you for contacting Adobe.  We are available 7 days a week, 24 hours a day. Goodbye!
    Any help would be appreciated.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • Setting up local testing server for coldfusion 9

    I could use some help with this thread in coldfusion forum...
    setting up local testing server for coldfusion 9 w dreamweaver on mac
    http://forums.adobe.com/thread/773350
    thanks

    I'm marking this as assumed answered, as you seem to have solved the problem in the other thread.

  • Deployer Installation: Failed to validate Release Management Server for Team Foundation Server 2013

    Attempting to install the deployer on a machine and getting the below error.  Not sure what that means, out of turn error or what actually occurs at this step, validating release management server,  during the configuration piece.  The user,
    that we set for the service was validated fine.  The user is an service account in the TFS RM Server, is  an admin on the local box as well.
    I am able to get into the TFS RM Server through the client just fine. I can hit the TFS RM UI just fine as well.
    Curious what would not allow the deployer to complete as mentioned below.
    Any help is appreciated.
    I, 2013/12/16, 14:46:26.521, Validated account to use as identity for Release Management Services.
    I, 2013/12/16, 14:46:26.521, Validating Release Management Server for Team Foundation Server 2013...
    E, 2013/12/16, 14:46:30.905, Received Exception : Microsoft.TeamFoundation.Release.CommonConfiguration.ConfigurationException: Failed to validate Release Management Server for Team Foundation Server 2013.
       at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateServerUrl()
       at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateAndConfigure(DeployerConfigUpdatePack updatePack, DelegateStatusUpdate statusListener)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    I, 2013/12/16, 14:46:30.905, Work completed for GetConfiguration() call : got out of turn error
    E, 2013/12/16, 14:46:30.905, Failed to validate Release Management Server for Team Foundation Server 2013.

    Hi Kpdn, 
    Thanks for your post.
    All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Office Web Apps server for Lync DNS question

    We are going to deploy an Office Web Apps server for our Lync 2013 clients, available internally and externally. We do not have a split-horizon DNS so it is not possible for wac.foo.com to have a different IP for internal vs. external clients. What is the
    best setup for our scenario? It looks like we can only add one address in the Lync topology builder, so would it make sense to send everybody to the external wac.foo.com regardless of whether they are internal vs. external? Or is there a better option?
    Thanks,
    Matt

    It might be easiest to use pin-point DNS.  Create an internal zone called wac.foo.com with a blank A record that points to the internal IP address of the OWAS/WAC server.  This way, wac.foo.com will resolve to the correct
    internal address, but you're not setting up a split zone for the rest of foo.com.
    This trick can come in handy for publishing other items without recreating the entire zone, it's a nice one to keep in your back pocket.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Can I use Leopard Server for a few things without a static IP/DNS mapping?

    Caveat: I'm pretty capable at setting up and running macs, but not a crack server admin or anything like that. I don't write code and my eyes start to glaze over when you start talking about Kerbos and the like...
    Question: I'd like to use Leopard server for a few things on my local network - with some vpn access to the same services:
    - iCal server (the most important feature) for 3 users
    - File server services for Time Machine (yes, base Leopard can do this)
    - vpn access into the iCal server for one user
    Do I have to go through the headache of switching over from a dynamic IP to a static IP, setting up DNS mapping, etc? Or is there a simpler way?
    Any help appreciated. Thanks

    Caveat: I'm pretty capable at setting up and running macs, but not a crack server admin or anything like that. I don't write code and my eyes start to glaze over when you start talking about Kerbos and the like...
    Question: I'd like to use Leopard server for a few things on my local network - with some vpn access to the same services:
    - iCal server (the most important feature) for 3 users
    - File server services for Time Machine (yes, base Leopard can do this)
    - vpn access into the iCal server for one user
    Do I have to go through the headache of switching over from a dynamic IP to a static IP, setting up DNS mapping, etc? Or is there a simpler way?
    Any help appreciated. Thanks

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • DNS/web-server hosted off-site. How to set up Leopard server for mail?

    Hey Everyone,
    Brand new xserve with leopard server 10.5.2. Currently, Our web and DNS server for our domain,"company.com" is co-located off-site with an MX record of "mail.company.com" pointed at the static IP of the office where our mail server is. I want to replace the mail server with the xserve. With that in mind, how do I configure the DNS on the xserve during initial configuration to reflect that? Give it a self-referencing FQDN like server.company.office and see if the mail service can handle the domain hosted elsewhere?
    I'm pretty new to servers and would love be able to keep this all in Standard but I'm not afraid to jump into Advanced if need be. I've created a test domain through GoDaddy of "company2.com" with an MX record of "mail.company2.com" pointing at the IP address of the xserve. Any help would be greatly appreciated!

    Hello,
    Have a look at this blog post:
    http://blogs.adobe.com/captivate/2010/08/reporting-the-quiz-results-to-a-local-server.html
    Lilybiri

  • Where is the Oracle Application Server for Apex 3.2.1?

    Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHat
    I think it is here
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
    So, which one should I download, or where can I find it?
    Thanks.

    Hi,
    Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
    So, which one should I download, or where can I find it?>
    Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
    Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
    Cheers,

  • Help... I need help to install a server for my form to run on web

    Hi there,
    I installed a New server with Windows 2003.
    I have some oracle forms developed using 6i, I don't mind to convert them later.
    What other oracle 10g software I need to install to have my oracle forms and reports to run on web?
    I tried to install in this sequence but not working:-
    1- windows 2003
    2- IIS
    3- Oracle Developer Suite
    Then I removed IIS and installed the Oracle SOA Application server also still cannot.
    What did I do wrong or what should I install (I meant by sequence?)
    Please advise.
    Thank you

    Why installing IIS o_O?
    For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
    For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
    For configuring both of them just take a look at the documentations on http://otn.oracle.com
    regards
    christian

  • Unable to start Oracle Reports Server for 10g version 10.1.2.3.0

    Attention Oracle Reports Team or anyone else:
    I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
    I have included the trace files see below. I marked the text in bold that might indicate the issues.
    Any help will be greatly appreciated. Thank you.
    Reports engine rwEng trace file:+
    [2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
    [2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
    [2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
    [2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
    [2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
    [2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
    [2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
    [2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
    [2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
    [2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
    [2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
    [2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
    [2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
    [2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
    [2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
    [2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
    [2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
    [2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
    [2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
    [2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
    *[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
    *[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
    [2010/7/8 10:11:58:330] (C Engine)
    [2010/7/8 10:11:58:330] (C Engine)
                   | Reports Builder Profiler statistics |
    [2010/7/8 10:11:58:330] (C Engine)
    [2010/7/8 10:11:58:330] (C Engine)
    TOTAL ELAPSED Time: 6.06 seconds
    [2010/7/8 10:11:58:331] (C Engine)
    Reports Time: 6.06 seconds
    [2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
    [2010/7/8 10:11:58:331] (C Engine)
    ORACLE Time: 0.00 seconds
    [2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
    [2010/7/8 10:11:58:331] (C Engine)
    UPI: 0.00 seconds
    [2010/7/8 10:11:58:332] (C Engine)
    SQL: 0.00 seconds
    [2010/7/8 10:11:58:332] (C Engine)
    TOTAL CPU Time used by process: 1.08 seconds
    [2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
    [2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
    [2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
    [2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
    [2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
    [2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
    [2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
    [2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
    [2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
    [2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
    [2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
    [2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
    [2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
    [2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
    [2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
    [2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
    [2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
    [2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
    [2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
    [2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
    [2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
    *[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
    *[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
    [2010/7/8 10:12:5:758] (C Engine)
    [2010/7/8 10:12:5:758] (C Engine)
                   | Reports Builder Profiler statistics |
    [2010/7/8 10:12:5:758] (C Engine)
    [2010/7/8 10:12:5:759] (C Engine)
    TOTAL ELAPSED Time: 6.06 seconds
    [2010/7/8 10:12:5:759] (C Engine)
    Reports Time: 6.06 seconds
    [2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
    [2010/7/8 10:12:5:759] (C Engine)
    ORACLE Time: 0.00 seconds
    [2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
    [2010/7/8 10:12:5:760] (C Engine)
    UPI: 0.00 seconds
    [2010/7/8 10:12:5:760] (C Engine)
    SQL: 0.00 seconds
    [2010/7/8 10:12:5:760] (C Engine)
    TOTAL CPU Time used by process: 1.01 seconds
    [2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
    [2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
    [2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
    [2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
    [2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
    [2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
    [2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
    [2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
    [2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
    [2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
    [2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
    [2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
    [2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
    [2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
    [2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
    [2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
    *[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
    *[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
    [2010/7/8 10:12:13:91] (C Engine)
    [2010/7/8 10:12:13:92] (C Engine)
                   | Reports Builder Profiler statistics |
    [2010/7/8 10:12:13:92] (C Engine)
    [2010/7/8 10:12:13:92] (C Engine)
    TOTAL ELAPSED Time: 6.05 seconds
    [2010/7/8 10:12:13:92] (C Engine)
    Reports Time: 6.05 seconds
    [2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
    [2010/7/8 10:12:13:93] (C Engine)
    ORACLE Time: 0.00 seconds
    [2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
    [2010/7/8 10:12:13:93] (C Engine)
    UPI: 0.00 seconds
    [2010/7/8 10:12:13:93] (C Engine)
    SQL: 0.00 seconds
    [2010/7/8 10:12:13:93] (C Engine)
    TOTAL CPU Time used by process: 1.02 seconds
    *[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
    reports engine rwURLEng trace file:+
    *** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
    *** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
    <cache class="oracle.reports.cache.RWCache">
    <property name="cacheSize" value="50"/>
    <!--property name="cacheDir" value="your cache directory"/-->
    <!--property name="maxCacheFileNumber" value="max number of cache files"/-->
    <!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"/-->
    </cache>
    <!--Please do not change the id for reports engine.-->
    <!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
    <engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">
    <!--property name="sourceDir" value="your reports source directory"/-->
    <!--property name="tempDir" value="your reports temp directory"/-->
    </engine>
    <engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>
    <!--security id="rwSec" class="oracle.reports.server.RWSecurity">
    <property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
    <property name="oidEntity" value="reportsApp_myhostname_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"/>
    </security-->
    <!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
    <property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
    </destination-->
    <destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">
    <!--property name="proxy" value="proxyinfo.xml"/-->
    </destination>
    <destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">
    <!--property name="proxy" value="proxyinfo.xml"/-->
    </destination>
    <!-- By default server will use rwnetwork.conf as network config file
    Use this element to override the same -->
    <!--networkConfig file="rwnetwork.conf"></networkConfig-->
    <job jobType="report" engineId="rwEng" securityId="rwSec"/>
    <job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
    <notification id="mailNotify" class="oracle.reports.server.MailNotify">
    <property name="succnotefile" value="succnote.txt"/>
    <property name="failnotefile" value="failnote.txt"/>
    </notification>
    <!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
    <property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" confidential="yes" encrypted="no"/>
    </notification-->
    <log option="noJob"/>
    <!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
    <property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
    </jobStatusRepository-->
    <trace traceOpts="trace_all" traceMode="trace_append"/>
    <connection maxConnect="20" idleTimeOut="15">
    <orbClient id="RWClient" publicKeyFile="clientpub.key"/>
    </connection>
    <queue maxQueueSize="1000"/>
    <!--jobRecovery auxDatFiles="yes"/-->
    <!--
    The value of the 'identifier' element is encrypted and is of the form SERVERACCESSKEY_USER/SERVERACCESSKEY_PASSWORD
    SERVERACCESSKEY_USER and SERVERACCESSKEY_PASSWORD in <server>.conf and targets.xml
    file should match for Reports EM pages to display data correctly.
    Corresponding entries of username and password in targets.xml:
    <Property NAME="Password" VALUE="SERVERACCESSKEY_PASSWORD" ENCRYPTED="FALSE"/>
    <Property NAME="UserName" VALUE="SERVERACCESSKEY_USER" ENCRYPTED="FALSE"/>
    -->
    <!--pluginParam name="mailServer">stmail.oracle.com</pluginParam-->
    <!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->
    <pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
    <pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
    <pluginParam name="textpds" type="file">textpds.conf</pluginParam>
    </server>
    *** 2010/7/8 10:11:47:308 -- Reports Server is starting up
    *** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
    *** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
    *** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
    *** 2010/7/8 10:12:13:178 -- Server is shutting down
    Why does the rwURLEng engine start up and then immediately shut down?+
    reports server trace file:+
    [2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
    [2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
    [2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
    [2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
    [2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
    [2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    [2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
    [2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
    [2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
    [2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
    [2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
    [2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
    [2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
    [2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
    [2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
    [2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    [2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
    [2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
    [2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
    [2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
    [2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
    [2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
    [2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
    [2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
    [2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
    [2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
    [2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
    [2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
    [2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
    [2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
    [2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
    [2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
    [2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
    [2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
    [2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
    [2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
    [2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
    [2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
    *[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
    [2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
    [2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
    [2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
    [2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
    [2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
    [2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
    [2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
    [2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
    [2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
    [2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
    [2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
    [2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
    [2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
    [2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
    *[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
         at oracle.reports.utility.Utility.newRWException(Utility.java:758)
         at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
         at oracle.reports.server.IdleThread.run(IdleThread.java:88)
    *[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
    [2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
    [2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
    [2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
    [2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
    [2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
    Why does the trace file indicate that the rwEng engine died with error?+
    Again why does the rwURLEng engine start up and then immediately shut down?+
    Thank you for your help on this issue.+

    OK, I did this once and did not follow the oracle docs
    If you saved your targets.xml before you started you might save it by renaming it back.
    (Double check to make sure you did not miss a rename)
    Otherwise, all I have to offer is my rough notes:
    1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
    [oracle@ias02 emd]$ pwd
    /u01/app/oracle/product/midtier/sysman/emd
    cp targets.xml targets.xmlbackup
    2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
    i.e. Replace rep_test_midtier with rep_new (4 places - changes)
    Copy the conf file as follows: ( this will named different from system to system )
    cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
    run this script:
    /u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam          (change rep_fam to new report server name)
    3.Update the changed configuration .
    /u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
    /u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
    4. Restart the Application Server Control Console
    /u01/app/oracle/product/midtier/bin/emctl stop iasconsole
    /u01/app/oracle/product/midtier/bin/emctl start iasconsole
    In the file:
    /u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
    Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
    Best Wishes (I was able to save mime)
    The other option is to reinstall

  • Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

    Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
    This happens each and every time, on different Wifi networks, in different locations.  On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

    Try this DNS server ...
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch both your browsers to test.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    And here >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

  • How can I set-up my mac mini server to be a central file server for my windows boxes (they don't see the mac on the network), and how do I set-up a central iTunes server so that all my devices sync to the mac mini?

    I am looking for step by step instructions to configure my mac mini server to support the following:
    1. Central itunes server for all my devices (ipad, ipod, iphone, etc.)
    2. Central file server so that my windows devices can save and retrieve data from the central system (the mac does not show up in the network for the windows systems - all running windows XP or 7)
    Thanks,
    Keith

    You will need to enable file sharing in System Preferences
    as well as setting up sharing and permissions for the
    directories that you want shared.  You may also want to
    setup a non-administrative user or allow limited guest
    access.  The user would require entering a user name and
    password to make the connection, but would allow remotes
    to change files, if set up tat way.
    As for serving iTunes media, better to post in the iTunes forum.

  • Lion Server for Home use reality check

    Hi All,
    as many others I had the best intentions buying Lion Server for my home network (5 Macs, 2 iPads, 2 iPhones) to manage everything.
    It was destined to be a central server for user management, configuration management, home directories, file server, software update server, web server and Time Machine server and possible VPN gateway to my home network.
    I did not intended to use  as Address Book, iCal, Mail server as I use iCloud. I just don't see the point of iChat, Podcast, Wiki server for my home use.
    Anyway the bits I had to abandon so far are:
    configuration management - Profile Manager works only sometimes and is sluggish to say the least
    home directories - the home sync just doesn't work for Mac libraries such as iPhoto and iTunes
    software update server - worked, broke, fixed, worked, broke, fixed, ... going away with Mountain Lion.
    What works for me is user management, file server, web server and Time Machine backup, haven't gotten around to test VPN yet.
    Given that Mountain Lion is coming next month and presumably I'll have to buy new license for the Server version I am not sure if it's worth it.
    As I see it using a plain vanilla Lion or Mountain Lion system I can still do file server, web server and Time Machine backup. What I'd lose is the user management and I am not sure about VPN on a non-Server system but not really important. User management is a one time task for 5 Macs that's it.
    Would be interested to hear opinions from you folks about pros / cons of using a plain Lion or Mountain Lion OS X for server tasks vs Server version?
    Anything I am missing here?
    Thanks
    Andy

    iToaster wrote:
    most osx server issues are usually DNS problems
    if that is not correct practically nothing else will work correctly
    That's probably true but also within that lies a major problem how this is positioned "The Server for Everyone". I am in IT and know what a DNS is. Most home users would NOT have a DNS running as it's not necessary not even talking about SSL certificates. I think this is a major problem here that it market incorrectly.
    iToaster wrote:
    if your trying to have portable home directories and having iphoto library sync'd
    I don't recomend on wireless , even on a wired 1gb network it's slow
    use WGM to skip iphoto or be prepaired for a long wait
    It's not so much a network bandwidth problem but the fact that home sync doesn't work for package files such as iPhoto, etc. Many people have confirmed that that home sync actually corrupts those files.
    iToaster wrote:
    for the cost of ML server it's probibly cheaper in the long run then the time you'd spend
    trying to get the same funtionallity via terminal.  plus the posiblity of a OS update
    that may blow all your finely crafted terminal work all away.
    Don't intend to do terminal but for example take "File Sharing". It's an Server option but every Mac also has file sharing under the "Sharing Settings". As far as I can tell the server actuallty is just an overlay over the Mac sharing option because if I define a file share it's also updated in the sharing option.
    Same thing goes for the Webserver. Hence I am thinking that Server really only is a central console for some basic services that can also be available by using standard OS X functionality.

Maybe you are looking for

  • How do you have 2 ipod users on a comp?

    I just got the new 5th gen. ipod...my brother had an earlier version and therefore had ipod already loaded on the computer. I do not wish to have his library and playlists on my ipod. Nor do i want to look at his music. How do i load my ipod so that

  • Self-Registration Portal Cisco ISE 1.3 Keeps Going Back to Auth Page

    We upgraded our Cisco ISE from 1.2.x to 1.3.x.  The migration was successful, and everything appears to be correct.  I see that our customized portals were brought over as well.  We've created a new customized guest portal.  We've updated the authori

  • SDK Installation

    hello all i downloaded SDK, i need a step by step instalation procedure for it and how can i apply these services on my system. i am using callmanager v.4.1 and cisco unity connection version 1.1 your reply will be appreciated regards

  • Z77 Mpower boot issue - won't POST

    Hi there Got a question regarding a PC build that isn't working as well as hoped. Doing this on behalf of my friend but I've been helping him while he builds it so have a good idea of what's been going on. Set up is as follows: Processor: Core i5 357

  • Copa document

    Dear SAP gurus, I  configured COPA and our scenario is Make to order. While doing of billin copa document is not generating. I went to KE4S to transfer billing documents to copa manually it is saying that " document XXXXXXXXXXXX is not profit related