Is Overwrite option available in BI7.0`

Hi Guys,
I need to merge two DSOs A&B in to third DSO C. I have same key fields in each of this DSO.When I create two transformations , Iam unable to see the consolidated data. In change log of DSO C , its showing both DSOs A & B Data one after other. Like if my DSO A has 200 records and B has 300 records C is showing 500 records. If the DSO A and DSO B has the same company code , Doc Nr and Fiscal Year it should match in C and should display it as one single record ...What to do for this in BI. I worked this same kind in BI 3.5 with update rules overwrite option. But here in 7.0 what to do can any one advice?
Thanks a lot in advance

the over write should be available in KF - rule details. Not on the key fields, anyway key fields anyhow make a record unique (as per the ODS architecture) so the data fields would be anyway overwritten. The DSO just gives us the option to see if you want the KF to be summed or overwritten. 
Just curious - do you have a any counter field(to count the occurences or whatever) in the design of ur ODS.
Like if my DSO A has 200 records and B has 300 records C is showing 500 records.
where are you checking these numbers - in manage menu or the table itself. Can you see if the numbers that show on manage match to the ones in the table?
Message was edited by:
        voodi

Similar Messages

  • Trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available???

    trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available?? and if so, where is it located???

    No such option on an iPhone.  Just go to Settings>wifi, tap the name (SSID) of your your home network from the list, then when prompted, enter the password.

  • Vendor Invoice Wrongly posted- options available

    Vendor invoices has been wrongly posted to another vendor .What are the options available to correct the same
    1.FB05 Post with clearing
    2.F-51-Transfer from one vendor to another
    3.Reset the invoice and redo it
    4.Go for F-03 Manual clearing and through FB50 go for a G.L Posting
    Please advice me whether all the above can be applied
    Thanks
    Nagendra Prasad BS

    Hi ,
    IF this is coming from MM  and not paid then please reverse in MR8M and maunal clear FI docuemnt F-44 this will open PO again for posting correct Invoice .
    if this one is mm and paid invoice then raise a credit note to the wrong vendor and Post invoice on correct vendor .
    Same you can do for ONo PO - FI docuemnt . Reverse the Invoice in FB08 and  clear in FBRA  if invoice is not paid . then Pst correct invoice in Fb60 to correct vendor .
    IF invoice is paid to wrong vendor then raise a credit note and post the correct invoice to correct vendor .
    many Thanks .

  • Trying to open file in photoshop elements, only first option available in Edit Photo window.  The other two has "Edit a Copy is not applicable to raw or Digital Negative files" same for Edit Original.

    Brand new user to Lightroom 5.  Was following tutorials and doing fine editing.  After done editing NEF files, I'm trying to open them in PSE 11 to further edit.  Using the "Edit Photo with Adobe Photoshop Elements Editor".  But the window only has the first option available and the other two grayed out.  Each of those has "...is not applicable to raw or Digital Negative files."  What??

    Ricardo.Amaral wrote:
    What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG.
    sorry, no can do...ain't gonna happen.
    What you've done is hit the wall on is the basic difference between lite duty spot healing and photo level tone and color correction (Lightroom and Camera Raw) and heavy duty pixel retouching in Photoshop.
    When you need to substantially manipulate the "pixels" you need Photoshop and you'll be forced to render the raw file into a TIFF or PSD file either through Camera Raw or more better, via Lightroom.
    You can do the basic tone and color correction directly in Lightroom and edit in Photoshop from Lightroom. But you will NEED to create and save out a "rendered" image that is no longer raw...then retouch to your heart's desire, save it and it'll be available in Lightroom along side your original raw if you choose.
    But no, there's no way to open a raw in Photoshop, manipulate the heck out of it with massive retouching then save that back out as a raw file...ain't gonna happen.

  • Labview 7.1 crashes windows XP when using VI's saved with the 'Save for Previous Version' option available in Labview 8

    I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1.  The code was saved with the 'Save for Previous Version' option available in Labview 8.  When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes).  Are there any ideas what's going on and how to fix this?
    Thanks for your help!
    Mike

    I have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
    If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
    Try to take over the world!

  • Are Smart HUD options available in Dreamweaver CS6 Version 12 Build 5861

    Have just upgraded to Dreamweaver CS6 and cannot find the Smart HUD options.
    Are the Smart HUD options available in Dreamweaver CS6 Version 12.0 Build 5861.

    None of the students here can afford CC, its just a shame and reflects poorly on Adobe.
    Are they aware that, as students, they can get the entire Cloud (all CC apps) for US$199 for 12 months (or US$19.99/month)?
    http://www.adobe.com/products/creativecloud/buying-guide-education.html

  • Regarding Overwrite option in ODS

    Dear experts,
    I have an elementary doubt. Why is that in DSO SAP is allowing for overwrite, while not in infocubes.. Any special reasons? As far i thought since ODS has flat tables its easier to maintain change logs as compared to infocubes (denormalization might be a problem too)
    Do correct me if I am wrong and if anything has to added to it...
    Thanks.,
    Rajarathnam.S

    Hi....
    In data load ODS is used as an intermediate object.......For delta process the overwrite option of ODS is very important.....
    The delta process is a property of the extractor and tells you how data will be transferred ie after extraction which image is transfferred. As an attribute of the DataSource, it indicates how the data in the DataSource will be transferred to the data target. This enables you to derive the data targets for which a DataSource is suitable, how to update them, and how the serialization has been done, for example.
    The type of delta process influences how data is updated to a data target.Serialization is necessary for updating to a DataStore object, as overwriting is supported too. Depending on the delta process, the system decides whether
    serialization is necessary per request or per data package.
    There are various delta processes for SAP source systems (R/3, B2B, CRM, and
    so on):
    1. Creation of deltas with after, before and reverse images that are updated directly to the delta queue.
    An after image provides the status after the change, a before image the status before the change with a minus sign. A reverse image sends the record with a minus sign too, indicating at the same time that it is to be
    deleted. The data packages are serialized in the process. The delta process controls whether adding or overwriting is allowed. In this case, both adding and overwriting is allowed. This process permits data to be updated in a DataStore object and in an InfoCube. (Technical name of the delta process in
    the system is ABR.)
    2. The extractor provides additive deltas that are serialized on a request basis.This serialization is necessary since the extractor provides each key once in a request, and changes to the non-key fields would otherwise not be transferred
    correctly. It only allows fields to be added. It permits data to be updated in a DataStore object as well as an InfoCube. This delta process is used by LIS DataSources. (Technical name of the delta process in the system: ADD)
    3. Creation of deltas with after image that are updated directly to the delta queue. The data is serialized by package, because the same key can be transferred a number of times within a request. It does not allow data to be updated directly to an InfoCube. To update an InfoCube, you always have to have a
    DataStore object as a go-between. With numeric key figures, for example, this process only allows you to overwrite data. Adding is not permitted,as this would produce incorrect results. It is used to transfer line items in FI-AP/AR, whilst the variation on this process, in which the extractor can also send records marked for deletion, is used in this function in the BBP.
    (Technical name of the delta process in the system is AIM or AIMD.)
    Also check this Blog :
    How does a datasource communicates "DELTA" with BW?
    Hope this helps you to understand the utility........
    Regards,
    Debjani.........

  • I have recently updated to ios5 and when restoring apps etc it says my backup needs a password, i password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

  • Update and Overwrite Option in Import Master Data Package

    Hello,
    In the package Import Master Data there is the option "Select method for loading master data". I don't understand very well what is the difference between the "Update" and "Overwrite" option. I have tested both and I get the same result.
    Can someone explain to me what is the difference between both options ?
    Thanks,
    Mathieu

    Option overwrite: all properties are overwritten. If they are not maintained in the source file, they will be deleted in the member sheet
    Option update: only the properties maintained in the source file are overwritten. The other ones are not changed.
    D

  • HT1766 In iOS 8 hotspot option available are not

    IIn iOS 8.  Hotspot option available are not

    Settings  -> Personal Hotspot -> enable
    Are you not seeing this?
    What's happening / not happening?

  • HT1296 I synced my phone to my computer to get all my photos from my iphone to my computer and it put ALL my pictures from my computer onto my phone... how do I get them off? theres no delete option available on the phone

    I synced my phone to my computer to get all my photos from my iphone to my computer and it put ALL my pictures from my computer onto my phone... how do I get them off? theres no delete option available on the phone

    Do you mean to import photos from iphone to computer?  Is this what your doing http://support.apple.com/kb/HT4083.
    Looks like your syncing pics on your computer to your phone.  to remove it when your phone is sync to itunes, uncheck sync in the photos tab.

  • Need to repair volume but no repair option available

    This started when I tried to update iTunes to 7.0.2 so that I can use my iPod. Basically iTunes won't install so I verified and repaired permissions, (still wouldn't all the upgrade). So, I verified the disk and received the following msg:
    Invalid sibling link
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    ...yet there is no "Repair" option available. Can anyone point me in a direction here?

    You cannot repair the active startup disk. You can either boot from another disk that has Mac OS X on it, boot from the Mac OS X Installation CD/DVD, or boot into single-user mode.
    To boot from the Mac OS X Installation CD/DVD, place the CD/DVD in the drive, reboot and when you hear the startup chime either:
    - Hold down the 'C' key to try to automatically boot from the CD/DVD drive.
    - Hold down the 'option' key to load the Boot manager. You can click on a small icon of the Mac OS X CD/DVD and click the forward arrow button to boot from it.
    Once the Mac OS X Installation CD/DVD loads, you can run Disk Utility to repair your disk.
    To boot into Single User Mode, reboot your computer and hold down the 'command' and 'S' keys when you hear the startup chime. Keep holding them down until you see white text scrolling across a black background. When it stops, you will see at the bottom a command prompt ending with the # character. Type the following command:
    /sbin/fsck -fy
    fsck will go through several phases where you will see various bits of verification information and other informative bits. If, when it finishes, you see the message:
    ** The volume (nameofvolume) appears to be OK
    You can reboot your computer by enterin the command:
    reboot
    If, on the other hand, you see the message
    *** FILE SYSTEM WAS MODIFIED ***
    You should re-run the above fsck command until it no longer reports this message. Reboot your computer when you are finished.

  • Comfortable in the usage and options available in the query designer/WAD.

    Dear  Friends
    can any body send me docs regarding Comfortable in the usage and options available in the query designer/WAD.
    Thanks & Regards
    Ramana

    Hi Friend,
    For WAD :
    [http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/content.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/9f/281a3c9c004866e10000000a11402f/content.htm]
    For Query Designer :
    [http://help.sap.com/saphelp_nw04s/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/605f1751-a701-2a10-b791-9da5ba4f2a64]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a81de5-a701-2a10-76bd-d8ec848cd326]
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/505e9d7e-0601-0010-3fa7-b40010bbdec5]
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
    Scroll down to Business Intelligence-> Bi suite Business Explorer-> Query Designer
    Hope this helps.
    Regards
    Hemant Khemani

  • Should Apple add "Overwrite" option when dragging a file into another?

    Why apple never added a overwrite option? Who would think this is a good idea?!?!? I think they should add overwrite option.

    It's called Replace instead of Overwrite, and it does not need to be added as it is already there.

  • What are options available to cancel the Excise Invoice?

    Hi,
    What are options available to cancel the Excise Invoice?
    Does cancelling the commercial invoice automatically cancels the excise invoice
    if not what are the other options?
    Any settings required to achieve that.
    Usefull answers will be rewarded
    Thanks
    Regards

    Dear Rajiv
    No cancelling commercial invoice will not cancel the excise invoice in background.  For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group.  Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
    thanks
    G. Lakshmipathi

Maybe you are looking for