Is Part# SSM-4GE compatible with PIX ?

suggested replacement for PIX-1FE is SSM-4GE. does it mean it is compatible with PIX ?
http://cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5709/ps2030/end_of_life_notice_for_cisco_pix_sec_app_cards_and_hwacc.html

No it is not. Since the PIX is now EoS, they assume you have/will upgrad to the ASA.
HTH

Similar Messages

I have Webroot Security and Firefox is not compatible with the malicious URLs part of the program? How do I protect myself?

When I downloaded Firefox and was checking my extensions, I was advised that Firefox is not compatible with the malware prevention part of my Webroot security package. I use it successfully with Windows and just renewed for another year. What do you suggest I do to protect myself? I am not a computer expert so if you could reply in plain language it would be appreciated. Also, we stream videos a lot and I noticed that DivX is also not compatible. What do I do about that? Thank you.

I was having this issue for Firefox version 7 and had to spend one hour trying to find a solution. Here is the solution. Go to webroot.com, tab to support and than 2011 product support. Type in Firefox Toolbar it will than say are you unable to use firefox toolbar hit yes. It will say under 1. click hear to download patch. Save the file and after the download run it. After installed close firefox and you should have the webroot toolbar running again.
ff7fix.exe is the file you need.

What hard drives are compatible with OSX Snow Leopard Boot Camp?

Recently when the video card in my desktop Mac died, I decided to make some upgrades, one of them being the hard drive. After doing some research, I fixed on the Western Digital 3TB Caviar Green 3.5-Inch and had it installed at the same time as the new video card. I installed OS 10.6.8, opened up Boot Camp Assistant, set the partition sizes: 2.5 TB for my Mac side and 500 GB for the Windows. XP wouldn't install so I ordered Windows 7 and began trying to set up the Windows partition. Each time I tried, I got the same error -- Windows 7 couldn't install on the 500 GB partition since it was formatted GPT which was strange since when I looked at the partition inside of Disk Utility, it said NTFS. While troubleshooting, I came across the following:
・Mac users should know that WD's new drives do not support Boot Camp, therefore they cannot be used as a dual-boot hard drive.
・The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
・In a 32-bit MBR world, a disk larger than 2TB is probably invalid, and different OS's and tools react wildly differently when this is forced beyond 2TB.
I called Western Digital to confirm which of their drives were in fact compatible with Boot Camp and they replied since Boot Camp was a third-party application, they have no information on compatibility. They told me to call Apple to get the information. Before purchasing a new drive and sending back the 3TB WD, I want to be sure I know which specs to look for in a hard drive in deciding whether it is compatible with my machine. Any helpful advice or a point in the right direction would be greatly appreciated.
Here are the specs for my Mac:
2006 24" iMac 6,1 2.16 GHz Intel Core 2 Duo
OS 10.6.8
Boot Camp Assistant 3.0.4

Thanks for responding to my question. I guess I'm not sure I understand your reply though. I had no problem installing OS X on the 3TB WD Caviar Green and WD assured me that if I wanted to install only Windows 7 on it, there would be no compatibility issues. The problem lies with wanting the drive to be dual-bootable I guess via using Boot Camp (I know of no other way to go about it). The tech at OWC (where I bought the drive) said he had never heard of any problems with being able to install both Mac and Windows OS on the drive. In fact, he gave the same reply as yours: most hard drives should be able to work perfectly fine with your Mac. It's just that I can't get XP or Windows 7 (32 bit or 64 bit) to install on the 2nd partition, making the drive I have now not dual-bootable. The tech said 2TB hard drives were different and should solve the problem but when I asked him for any discernible spec I could look for in shopping for a replacement drive, he couldn't give me one, i.e. most drives should be okay. I have paid to have the 3TB installed and will have to pay to get the drive taken out and a replacement put back in -- I want to make sure whatever drive I put in this time allows me to have 2 partitions: one for my Mac OSX system and the other for my Windows enviroment (either XP or Windows 7).
If there is a work-around not involving Boot Camp, please let me know. I thought the reason for using Boot Camp as opposed to Disk Utility to create the dual-bootable drive was the benefit of using Mac drivers on the Windows side.
If there is another way, I don't understand why PC world made this blanket statement:
"Mac users should know that WD's new drives do not support Boot Camp, therefore they cannot be used as a dual-boot hard drive."

Photoshop CS2: "file not compatible with this version of Photoshop" error

So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PM

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Will more recent MacBook Pro 15' Display Assemblies be compatible with my mid 2009 MBP?

My question will be geared towards folks who have experience doing self repairs on their MacBook Pros but I do welcome all helpful input. It breaks my heart to say that my MacBook Pro was dropped and now has a broken LCD/LED screen with a dented Display Housing(Lid) but the Front glass Display is fine. It is currently acting as a desktop with an external monitor. I am looking to do some self repairs as the price they charge at the genius bar isn't worth it for the older model and I am comfortable enough to do the repairs myself. I've been doing some research and it is possible to get the pieces individually(Not through apple directly) but now it becomes a compatibility game. In short, I have a mid 2009 15' 2.53GHz macbook pro but I will post a link to my tech specs.
http://support.apple.com/kb/SP544
My two options for self repair are either to
A) Buy an entire Display Assembly which I can swap out with my broken one OR
B) Buy a new LCD/LED screen and Display housing
I am leaning towards option B because the cost to replace the LED display is much cheaper but I am having no luck finding a relatively cheap, non damaged 2009 15' Display Housing. Some online stores that do sell it go for ridiculously high which in the end would make option A cheaper. I don't actually need to replace the Display Housing for the computer to work but I can't stand to look at the dent so I'll be doing the replacement.
So back to my original question. When searching for parts or an entire Display Assembly, would more recent models such as 2010, 2011, 2012 or 2013 parts be compatible with mine? Or were all models created differently and must be replaced with same year/model parts?

Yes. Any 2.5" 9.5 mm thick SATA HDD, SSHD or SSD will fit and be compatible with your MBP.
Ciao.

IPhoto not compatible with OSX Yosemite

I have a MacBook Pro (17 inch, early 2011) with a 2GHz Intel Core i7 and 4 GB 1333 MHz DDR3.
A few weeks ago I downloaded the Yosemite operating system (10.10.3). Since then, my iPhoto application will not open. I can't save pictures to my computer from my phone and I can't edit pictures I've imported. When I try to open iPhoto, it says: "In order to open "iPhoto", you need to update to the latest version. The version of iPhoto installed on this Mac is not compatible with OS X Yosemite. Download the latest version for free from the Mac Apple Store."
I search the app store for iPhoto and no updates are available. The message displayed is: " The item you've requested is not currently available in the US store."
Anyone know what to do to solve this? I really need to be able to edit photos. Thanks for helping!

You need iPhoto 9.6.1 for use with 10.10.3. Try the method Terence Posted in this topic to get it from the App Store:
Terence Devlin including Apple logo changes for feature 126 Apple image including Apple logo changes for feature 126 Apple image ends here
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
[DocumentBodyStart:d25bf602-029a-4466-b895-2ab6c98bb4c9]
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Otherwise you can drag your iPhoto Library onto the Photos app icon in the Dock to covert it to a Photos library.

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

How do I set the FireFox browser to be compatible with my Brother MFC-8840D printer so it will translate color into grayscale when printing from a webpage?

Hi, I have a question about setting the FireFox browser so it is compatible with my Brother MFC-8840D printer to print in grayscale. Currently, if I print anything in color, like a Google Map, the colored parts of the map show up blank, whereas the color should change to grayscale in a black/white laser printer. Brother tech support told me to contact Mozilla about this issue.
In comparison, when I print a Google Map on my dad's HP printer (also using FireFox browser), the color map prints perfectly in grayscale, so I can see all of the street lines.

The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
You will no longer receive security updates.<br />
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
Anyway, for the OP's benefit, this is what I found:
1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

Is the new Ipod Touch 5g compatible with all of the ios 6 features and is the new Ipod have the exact same design as the Iphone 5 for example square sides, instead of curving sides?

Does the new Ipod have the same features as the Iphone 5 in terms of panorama, or like the new Isight camera? Like the same features/ design?

it is compatible with most iOS 6 things, the main difference is just the fact that it doesn't have 3G or 4G, which limits how much it can use Siri or Maps.
it does have panorama, and a 5 MP iSight camera. the design is different. it is a lot thinner, it has curved edges, and at no part of the side is it flat, same for the top and bottom. that is NOT the case for iPhone. also the iPod doesn't have a mic. on the front.
hope this answered your question.
just remember this for iOS 6: pretty much everything that doesn't always require internet the iPod can do. if it is something liketurn by turn direction, unless you have wi-fi in car, it wont work.
if you need siri for anything outside of wifi, unless it's something on the hard drive itslef, i.e. setting up reminders, it wont work for thing such as facebook posts, looking for restaurants, etc.

Is itunes compatible with windows 8.1

is itunes compatible with windows 8.1

Bull-pucky the latest version is compatible! I have spent the better part of a great Sat. downloading versions all the way back to 10.7 even deleting the Library.itl file and starting fresh. I am running Windows 8.1 / 64-bit. . . . .went into ITunes Store today and all of a sudden NO WORDS OR DESCRIPTIONS APPEAR, ONLY PICTURES OF ALBUMS. How's one supposed to purchase anything when you cannot see what you're clicking on? ITunes has long had issues with Win 8.1 which I'm aware of, but THEY have done something from their end (possibly with this new $7.99 per month change coming) I'm assuming if I had a Mac this wouldn't be a problem, but this just stinks! I purchase a ton of music and have 16 published stations, do they not want my $$ any longer? Not negative towards you, sorry - can you help?

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

My Mac's operating system no longer compatible with my Deskjet 3050A

Hi,
I haven't used my printer in a while because it hasn't been working. But I'm tired of running to my neighborhood FedEx Office so am tackling this issue today.
I went to install the HP software on my MacBook Air and was told "installer not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below."
My Mac is running OSX, version 10.9.5. Is there anyway to make the printer compatible?
Thanks for your help!

Hi @kbaostrem
A full feature driver for Mavericks is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
If you would like, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. I look forward to hear from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

After upgrade to firefox 5 it says no longer compatible with my computer's architecture (Mac OS 10.5.8)

Been running Firefox for years. I upgraded as I usually do whenever there is a new version of Firefox. I downloaded Firefox 5.0 and now if I try to log on is says "This version is not compatible with your computer's architecture." I've changed nothing on my computer. I'm on a G4 Mac OS 10.5.8. I tried to download the older version of Firefox 4.0 but still the same message.

Hi @kbaostrem
A full feature driver for Mavericks is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
If you would like, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. I look forward to hear from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I know if my tv is compatible with Apple TV, How do I know if my tv is compatible with Apple TV

I have a Sharp LC-32PX5M 32-inch LCD TV. I also have an iPad 1 which I would like to use with Apple TV 2.
How do I know if they are compatible with AppleTV 2?
These are the specs:
Sharp LC32PX5M LCD HDTV Information
Manufacturer     Sharp
Manufacturer Part #     LC32PX5M
Production Status     Out of Production
Sharp LC32PX5M LCD HDTV Specifications
Display     Screen Size     32.0 in.
Display Type     LCD
Resolution     1366x768
Contrast Ratio     1200:1
Aspect Ratio     16:9
Brightness     450 cd/m²
Response Time     6 ms
Viewing Angle     176º
Analog Format     NTSC, PAL, SECAM
Backlight Life     60000 hrs.
Size     Dimensions (WxHxD)     31.4 in. x 21.4 in. x 4.5 in.
(79.76 cm x 54.36 cm x 11.43 cm)
Weight     36.3 lbs. (16.47 kg)
Input     HDMI Interface     2 x HDMI Interface
Composite Video     2 x Composite Video
Composite Audio     2 x Composite Audio
Component Video     2 x Component Video
Component Audio     2 x Component Audio
PC / VGA     1 x PC / VGA
PC / VGA Audio     1 x PC / VGA Audio
Cable / Antenna     1 x Cable / Antenna
Operation     Power Supply     110 ~ 240 V / 50 ~ 60 Hz
Maximum Power     158W

All you need is an HDTV (at least 720p) with HDMI and HDCP compliant, and you will be fine.

Is Part# SSM-4GE compatible with PIX ?

Similar Messages

Maybe you are looking for