Is Pavellion G6 - 2206 TX model with seperate dedicated 2GB Graphic card ?

Is Pavellion G6 - 2206 TX model with seperate dedicated 2GB Graphic card ?
What are the charges of 2 years extended warranty under Diwali scheme ?

Hi,
1. Based on the following link: YES
    http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03500043&lang=en&cc=u...
2. Don't know, check your local support:
   http://welcome.hp.com/country/w1/en/support.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to set up 2 iMacs, one with a non-functioning graphics card.

    Looking for suggestions.
    I have a 2009 27" iMac that has a broken graphics card. At least that's what I think is wrong with it cause when I turn it on I see white screens with vertical pink bars from top to bottom. I bought a new iMac 5K and I wanted to see if I could connect the old iMac as a second screen. Would that still need a functioning graphics card for the old or will the new iMac which will be the main computer be able to run both screens with it's own graphics card. I don't have a mini Display port cable yet as I wanted to see what people think first before I go get one. The old iMac has no thunderbolt port and has a mini display port, Ethernet and Firewire only. I'd appreciate any input on this learning process.

    Hello vman1027,
    As long as the 27" iMac is a Late 2009 model, you should be able to utilize its display as a Target Display for your 5k iMac.
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/en-us/HT3924
    Cheers,
    Allen

  • I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

    I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
    After five days of testing in the service they can not  found fault and it was decided to change the graphics card.
    New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
    Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

    You could look at the System Profile for the info it presents for the card.  But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
    What program are you trying to run?  Is there anything in the system log? 
    I think it's the program that's having the problem and not anything with your video software.

  • Lighting effects filter not available on PScc - using windows 8.1 with GeForce GTX 680 graphics card

    I have Photoshop cc and Lightroom 5.5.  My computer runs windows 8.1, 64 bit, with GeForce GTX 680 graphics card.
    I am trying to use the lighting effects filter, but it is grayed out so I cannot select it.
    Can you tell me what I need to change in order to use the lighting effects filter?

    This is the Lightroom forum. I don't use the lighting effects very often in Photoshop. But if I recall correctly, it will only work on 8-bit images.

  • I have a late 2009 iMac, with a Nvidia 9400 Graphics card.  I was wondering what my options are for upgrading.  I use Windows 7 via Bootcamp, so I need a card that is compatible.

    I have a late 2009 iMac, with the default Nvidia 9400 Graphics card.
    I was wondering what my options are for upgrading.  I use Windows 7 via Bootcamp, so I need a card that is compatible/has available drivers.
    This is for gaming. On the lowest settings of "Call of Duty 4", I get about 100 FPS... Was hoping to be able to play on higher resolution w/o the fps lag.
    I'm not good with the hardware part of computers at all, but know how to get around the OS.

    In most cases the graphics cards in iMacs are Not upgradeable.  They are usually soldered to the logic board.  RAM is considered, along with harddrives, the only component that is upgradeable in an iMac, unlike in PC's.  So basically you would need to sell your unit and purchase an iMac with a more powerful graphics card.
    Hope this helps

  • Does prem pro work with a nvidia gt630m graphics card

    Does prem pro work with a nvidia gt630m graphics card, i have downloaded from creative cloud but when i try to start the progrm I get a message from windows7 that the program has stopped working and then close s down.
    System is I7 processor, 8gb ram,and nvidia gt630m

    How to determine your nVidia driver version
    Right click in any open area of the Windows desktop
    Select NVIDIA Control Panel from the popup window
    Select SYSTEM INFORMATION at the lower left corner
    Driver version should be the 1st line in Details
    I have a GTX285 using driver 296.10 and Win7
    What is your driver version number?

  • Problems with BIOS for new graphics card!!! HEEELP!!!!

    Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened.  I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
    PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

    As stated before, and as a refresher. I just got off the line with MSI and EVGA.  What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg):  The 750Ti NF has a switch for Legacy/UEFI.  All others in the 700 series are UEFI.  The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy. 

  • Touchsmart 500 with windows 8. Graphics card upgrade.

    I have an IQ506 and I have put Windows 8 on it.  I had to dissable the graphics card which is an INVIDIA 9300M GS because it would not allow me to use the touchscreen.  Everything works well and I have not had an issue with anything so far but when my kids try to watch anything like NETFLIX it gives an error an says the graphics card needs updated.  I have already updated my graphics card and I know that it is not compatible with Windows 8 so I am wondering what I can purchase to allow windows 8 to run propperly with my touchscreen display and not have any issues with anything else.
    Thanks,
    Daniel

    Based on the CTO (configured to order) models using the same hardware, your only choices are;
    Intel Integrated graphics (if supported)
    nVidia GeForce 9300M GS (already installed)
    nVidia GeForce 9600M GS (HP p/n FK891-69001 - nVidia GeForce 9600M GS NB9P graphics card - PCI Express x16, MXM II interface, 512MB memory)
    I have no idea if the 9600M GS will provide better compatibility with the TouchScreen. The use non-HP supplied cards is not supported and may "blacklisted".
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Problem with the ATI 200M graphics card in a Satellite A110-334

    The computer is used both for office and home use (playing games, music etc)
    Only one problem after 6 months of use, but I can't get around it.
    When I start up Quake 3 all is well I can play for let's say 10-20 mins.
    After that I get a Blue Screen of Death saying that there was some memory error connected with the graphic card.
    Windows "tells me" to change the video card (it's not something i can do with a laptop ;) ) or to contact the hardware producer to change the bios because something could be wrong.
    Well only think I could do on my own was to change the drivers (I found some compatible with my card) but that didn't help. I also tried to change the amount of onboard memory used by the card (It uses x amount of available RAM), but to no avail

    Hi,
    which drivers youre using?
    Did you checked already these drivers out:
    http://www.omegadrivers.net/
    Maybe it helps. Otherwise you should send your machine to an authorized service partner for a hardware checkup since your machine is still in warranty and it wont cost you anything.
    Heres a link to find the nearest ASP in your country:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    Regards

  • Problem with recognising radeon 6490M graphics card on Pavilion dv6-6176sa

    So,
    My laptop was having some issues recently with the graphics, it basically wouldn't recognise either the intel or the radeon graphics card. I tried updating all drivers under the sun but nothing worked. In the end I formatted my computer and reinstalled windows, did all necessary updates windows and HP ones. Now my laptop would recognise both the intel and radeon in device manager but my computer was constantly using the intel card, I read up a bit and figured this would be due to an issue with the switchable graphics.
    I did the bios and drivers updates and changed switchable graphics to fixed mode, this seemed to do the trick and my laptop ran like it should be for a few days. This morning I start watching some of my shows and then my screen freezes and it starts making a bunch of noise (similar to what it was doing pre-factory reset). Oh dear, I turn it off, and leave it off for a bit figuring maybe it had overheated. I turn it on again, now device manager wont show the radeon card and AMD catalyst produces a warning message saying that there is no AMD driver compatible with the CCC (well it was just fine yesterday, no updates, program installations or anything run since then)
    I'm now wondering whether there may just be a hardware issue and that it's time to pack in my laptop or if this could still be a driver issue.

    @Piids 
    Download and install the most current AMD graphics softpaq.
    You can get it from the download section of your notebook's web support portal.
    Do not install the Intel graphics driver softpaq seperately. Doing that will remove the switchable graphics feature.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • No DVI output with T420 on integrated graphics card and Mini Dock Series 3

    Because of some application problems I have to set my new T420 to only use the integrated graphics card (disabling the NVidia Optimus feature). In this configuration I seem to be unable to use the DVI port on the Mini Dock Series 3, there is simply no signal and Windows reports that no monitor could be found. The VGA output works but the picture quality is quite bad.
    Is this a known design limitation or do I deal with a driver issue?
    Thanks
    Dan

    Yes, that works but there is the drawback of battery life. In the course of the day I often undock the laptop to go to meetings and using the discreet graphics card uses a lot more power and significantly reduces the time i can work without power. I would have to restart the laptop and change the setting in the BIOS after I undock, which is just not practical. For what I do I don't need the graphics power of the discreet card.

  • Xf86-video-intel not not working with intel 82852/855GM graphics card

    I am runing arch linux on a toshiba satilite r15 s829 and have the xf86-video-intel driver installed but Xorg does mot seem to be able to use it with my intel graphics card.
    output of lspci
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
    01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
    01:0b.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    01:0b.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    01:0b.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
    xorg onfig file: 10-monitor.conf
    Section "Monitor"
        Identifier    "Monitor0"
    EndSection
    Section "Device"
        Identifier    "Card0"
        Driver        "intel"
        #Option        "RandRRotation" "true"
        VendorName  "Intel Corp."
        BoardName   "82852/855GM Integrated Graphics Device"
    EndSection
    Section "Screen"
        Identifier    "Screen0"  #Collapse Monitor and Device section to Screen section
        Device        "Card0"
        Monitor       "Monitor0"
        DefaultDepth  24 #Choose the depth (16||24)
        #Option        "RandRRotation" "true"
        SubSection "Display"
                   Depth     16
                   Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                   Depth     24
                   Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                   Depth     32
                   Modes "1024x768" "800x600" "640x480"
        EndSubSection
    EndSection
    Xorg log file: Xorg.0.log
    [  2900.308]
    X.Org X Server 1.9.4
    Release Date: 2011-02-04
    [  2900.308] X Protocol Version 11, Revision 0
    [  2900.308] Build Operating System: Linux 2.6.37-ARCH i686
    [  2900.308] Current Operating System: Linux dragonL 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 09:07:57 UTC 2011 i686
    [  2900.309] Kernel command line: BOOT_IMAGE=(hd0,msdos1)//boot/vmlinuz26 root=/dev/disk/by-uuid/0cfdcd8b-eae7-4dbd-8dd6-0ff955089587 rootfstype=ext2 ro nomodeset add_efi_memmap
    [  2900.309] Build Date: 04 February 2011  09:39:45PM
    [  2900.309] 
    [  2900.309] Current version of pixman: 0.20.2
    [  2900.309]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [  2900.309] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [  2900.310] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 25 12:15:42 2011
    [  2900.310] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [  2900.310] (==) No Layout section.  Using the first Screen section.
    [  2900.310] (**) |-->Screen "Screen0" (0)
    [  2900.310] (**) |   |-->Monitor "Monitor0"
    [  2900.311] (**) |   |-->Device "Card0"
    [  2900.311] (==) Automatically adding devices
    [  2900.311] (==) Automatically enabling devices
    [  2900.311] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [  2900.311]     Entry deleted from font path.
    [  2900.311] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
    [  2900.311] (==) ModulePath set to "/usr/lib/xorg/modules"
    [  2900.311] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [  2900.311] (II) Loader magic: 0x81f3040
    [  2900.311] (II) Module ABI versions:
    [  2900.311]     X.Org ANSI C Emulation: 0.4
    [  2900.311]     X.Org Video Driver: 8.0
    [  2900.311]     X.Org XInput driver : 11.0
    [  2900.311]     X.Org Server Extension : 4.0
    [  2900.312] (--) PCI:*(0:0:2:0) 8086:3582:1179:0037 rev 2, Mem @ 0xd8000000/134217728, 0xd0000000/524288, I/O @ 0x0000eff8/8
    [  2900.312] (--) PCI: (0:0:2:1) 8086:3582:1179:0037 rev 2, Mem @ 0x40000000/134217728, 0x4c000000/524288
    [  2900.312] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [  2900.312] (II) LoadModule: "extmod"
    [  2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [  2900.312] (II) Module extmod: vendor="X.Org Foundation"
    [  2900.312]     compiled for 1.9.4, module version = 1.0.0
    [  2900.312]     Module class: X.Org Server Extension
    [  2900.312]     ABI class: X.Org Server Extension, version 4.0
    [  2900.312] (II) Loading extension MIT-SCREEN-SAVER
    [  2900.312] (II) Loading extension XFree86-VidModeExtension
    [  2900.312] (II) Loading extension XFree86-DGA
    [  2900.312] (II) Loading extension DPMS
    [  2900.312] (II) Loading extension XVideo
    [  2900.312] (II) Loading extension XVideo-MotionCompensation
    [  2900.312] (II) Loading extension X-Resource
    [  2900.312] (II) LoadModule: "dbe"
    [  2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [  2900.313] (II) Module dbe: vendor="X.Org Foundation"
    [  2900.313]     compiled for 1.9.4, module version = 1.0.0
    [  2900.313]     Module class: X.Org Server Extension
    [  2900.313]     ABI class: X.Org Server Extension, version 4.0
    [  2900.313] (II) Loading extension DOUBLE-BUFFER
    [  2900.313] (II) LoadModule: "glx"
    [  2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [  2900.313] (II) Module glx: vendor="X.Org Foundation"
    [  2900.313]     compiled for 1.9.4, module version = 1.0.0
    [  2900.313]     ABI class: X.Org Server Extension, version 4.0
    [  2900.313] (==) AIGLX enabled
    [  2900.313] (II) Loading extension GLX
    [  2900.313] (II) LoadModule: "record"
    [  2900.313] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [  2900.313] (II) Module record: vendor="X.Org Foundation"
    [  2900.313]     compiled for 1.9.4, module version = 1.13.0
    [  2900.313]     Module class: X.Org Server Extension
    [  2900.313]     ABI class: X.Org Server Extension, version 4.0
    [  2900.313] (II) Loading extension RECORD
    [  2900.313] (II) LoadModule: "dri"
    [  2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [  2900.314] (II) Module dri: vendor="X.Org Foundation"
    [  2900.314]     compiled for 1.9.4, module version = 1.0.0
    [  2900.314]     ABI class: X.Org Server Extension, version 4.0
    [  2900.314] (II) Loading extension XFree86-DRI
    [  2900.314] (II) LoadModule: "dri2"
    [  2900.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [  2900.314] (II) Module dri2: vendor="X.Org Foundation"
    [  2900.314]     compiled for 1.9.4, module version = 1.2.0
    [  2900.314]     ABI class: X.Org Server Extension, version 4.0
    [  2900.314] (II) Loading extension DRI2
    [  2900.314] (II) LoadModule: "intel"
    [  2900.314] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [  2900.314] (II) Module intel: vendor="X.Org Foundation"
    [  2900.314]     compiled for 1.9.4, module version = 2.14.0
    [  2900.314]     Module class: X.Org Video Driver
    [  2900.314]     ABI class: X.Org Video Driver, version 8.0
    [  2900.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
        Sandybridge, Sandybridge
    [  2900.314] (--) using VT number 7
    [  2900.324] (EE) No devices detected.
    [  2900.324]
    Fatal server error:
    [  2900.324] no screens found
    [  2900.324]
    Please consult the The X.Org Foundation support
         at http://wiki.x.org
    for help.
    [  2900.324] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [  2900.324]

    Please use [ code ] tags for pasting code https://bbs.archlinux.org/help.php#bbcode as it makes your posts much easier to read.
    There's a problem with old Intel cards and the current Intel drivers. Unfortunately using older drivers means downgrading xorg-server and friends. Read about downgrading in the wiki.
    I'm currently using xf86-video-intel 2.13.0-4 and xorg-server 1.9.4-1 and things are OK. My card
    [karol@black ~]$ lspci | grep -i vga
    00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
    Last edited by karol (2011-04-25 21:16:37)

  • Sims 3 with a GMA 950 Graphic Card?

    I really want to use the sims 3 on my macbook. It's a few years old. I looked in System Profiler and saw that i have a GMA 950 graphics card? I'm going to upgrad my memory to 2GB. Will it be possible to play the game?
    Thanks for the help!

    It may work, but the graphics card is NOT supported. I saw this thread:
    http://discussions.apple.com/thread.jspa?messageID=9573469&#9573469
    Which doesn't clearly state if the users were successful or not with the Mac version of Sims 3.
    Maybe someone else will have more solid information.
    ~Lyssa

  • Imac with radeon x 1600 graphics card will not send signal to projector

    I am using an Imac running Boot Camp. The Imac has a Radeon X 1600 graphics card. I have installed the latest driver in XP. The Device manager recognizes the correct card.
    The problem: I cannot get our projector to pick up the signal from the Imac. I have systematically gone through all the display settings. Others who have similar problems seem to have graphics cards with additional software that allows them to select a clone display feature.
    Any thoughts? The projector works fine with a macbook running bootcamp (xp).

    Hi Cathy and welcome to Discussions,
    sounds to me as if you are missing the Catalyst Control Center, which usually provides these kinds of setting.
    You can download both Drivers and the Control Center from the ATI/AMD website here: http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
    The Control Center needs a Windows where the .NET Framework (2.0 at least) is already installed before installing the Control Center, otherwise it does not work.
    You can download that from Microsoft http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd -aab15c5e04f5&displaylang=en
    Hope it helps.
    Good Luck
    Stefan

  • Xorg.conf for a dualhead setup with an ATI/AMD graphic card

    Hello Guys
    first I would mention that I've searched for a solution but I've not found one
    now back to the problem. I would configure my system so that I can work with two displays like Xinerama. But when I use
    $ startx
    then my two monitors have a white screen for a second, then the bigger one goes off (no signal) and the little stay with the white screen. The mouse pointer is not visible and no window manager is used.
    I have a SyncMaster P2250 (22") and a Eizo FlexScan L568 (17")
    my graphic card is an AMD/ATI Redwood (Radeon HD 5670) and the fglrx driver from the catalyst repository
    and finally my xorg.conf
    #Server Layout
    Section "ServerLayout"
    Identifier "Main_Layout"
    Screen 0 "Screen_Samsung" 0 0
    Screen "Screen_Eizo" RightOf "Screen_Samsung"
    EndSection
    #Device Section
    Section "Device"
    Identifier "Device_Samsung"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device_Eizo"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    #Monitor Sections (contains 2 monitors)
    Section "Monitor"
    Identifier "Monitor_Samsung"
    Option "DPMS" "true"
    Option "TargetRefresh" "59.9"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1680x1050"
    EndSection
    Section "Monitor"
    Identifier "Monitor_Eizo"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "1680 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1280x1024"
    EndSection
    #Screen Sections
    Section "Screen"
    Identifier "Screen_Samsung"
    Device "Device_Eizo"
    Monitor "Monitor_Samsung"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1680x1050_59.90"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen_Eizo"
    Device "Device_Eizo"
    Monitor "Monitor_Eizo"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024_60.00"
    EndSubSection
    EndSection
    I would be very grateful if somebody can help me
    greez Troopa

    Hello Guys
    first I would mention that I've searched for a solution but I've not found one
    now back to the problem. I would configure my system so that I can work with two displays like Xinerama. But when I use
    $ startx
    then my two monitors have a white screen for a second, then the bigger one goes off (no signal) and the little stay with the white screen. The mouse pointer is not visible and no window manager is used.
    I have a SyncMaster P2250 (22") and a Eizo FlexScan L568 (17")
    my graphic card is an AMD/ATI Redwood (Radeon HD 5670) and the fglrx driver from the catalyst repository
    and finally my xorg.conf
    #Server Layout
    Section "ServerLayout"
    Identifier "Main_Layout"
    Screen 0 "Screen_Samsung" 0 0
    Screen "Screen_Eizo" RightOf "Screen_Samsung"
    EndSection
    #Device Section
    Section "Device"
    Identifier "Device_Samsung"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device_Eizo"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    #Monitor Sections (contains 2 monitors)
    Section "Monitor"
    Identifier "Monitor_Samsung"
    Option "DPMS" "true"
    Option "TargetRefresh" "59.9"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1680x1050"
    EndSection
    Section "Monitor"
    Identifier "Monitor_Eizo"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "1680 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1280x1024"
    EndSection
    #Screen Sections
    Section "Screen"
    Identifier "Screen_Samsung"
    Device "Device_Eizo"
    Monitor "Monitor_Samsung"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1680x1050_59.90"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen_Eizo"
    Device "Device_Eizo"
    Monitor "Monitor_Eizo"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024_60.00"
    EndSubSection
    EndSection
    I would be very grateful if somebody can help me
    greez Troopa

Maybe you are looking for